mainmenu "Linux Kernel Configuration"
-config X86
+config X86_32
bool
default y
help
486, 586, Pentiums, and various instruction-set-compatible chips by
AMD, Cyrix, and others.
-config MMU
+config SEMAPHORE_SLEEPERS
bool
default y
-config SBUS
+config X86
bool
+ default y
-config UID16
+config MMU
bool
default y
+config SBUS
+ bool
+
config GENERIC_ISA_DMA
bool
default y
bool
default y
+config GENERIC_HWEIGHT
+ bool
+ default y
+
+config ARCH_MAY_HAVE_PC_FDC
+ bool
+ default y
+
+config DMI
+ bool
+ default y
+
source "init/Kconfig"
menu "Processor type and features"
+config SMP
+ bool "Symmetric multi-processing support"
+ ---help---
+ This enables support for systems with more than one CPU. If you have
+ a system with only one CPU, like most personal computers, say N. If
+ you have a system with more than one CPU, say Y.
+
+ If you say N here, the kernel will run on single and multiprocessor
+ machines, but will use only one CPU of a multiprocessor machine. If
+ you say Y here, the kernel will run on many, but not all,
+ singleprocessor machines. On a singleprocessor machine, the kernel
+ will run faster if you say N here.
+
+ Note that if you say Y here and choose architecture "586" or
+ "Pentium" under "Processor family", the kernel will not work on 486
+ architectures. Similarly, multiprocessor kernels for the "PPro"
+ architecture may not work on all Pentium based boards.
+
+ People using multiprocessor machines who say Y here should also say
+ Y to "Enhanced Real Time Clock Support", below. The "Advanced Power
+ Management" code will be disabled if you say Y here.
+
+ See also the <file:Documentation/smp.txt>,
+ <file:Documentation/i386/IO-APIC.txt>,
+ <file:Documentation/nmi_watchdog.txt> and the SMP-HOWTO available at
+ <http://www.tldp.org/docs.html#howto>.
+
+ If you don't know what to do here, say N.
+
choice
prompt "Subarchitecture Type"
default X86_PC
config X86_NUMAQ
bool "NUMAQ (IBM/Sequent)"
- select DISCONTIGMEM
+ select SMP
select NUMA
help
This option is used for getting Linux to run on a (IBM/Sequent) NUMA
default y
depends on SMP && X86_ES7000 && MPENTIUMIII
-if !X86_ELAN
-
-choice
- prompt "Processor family"
- default M686
-
-config M386
- bool "386"
- ---help---
- This is the processor type of your CPU. This information is used for
- optimizing purposes. In order to compile a kernel that can run on
- all x86 CPU types (albeit not optimally fast), you can specify
- "386" here.
-
- The kernel will not necessarily run on earlier architectures than
- the one you have chosen, e.g. a Pentium optimized kernel will run on
- a PPro, but not necessarily on a i486.
-
- Here are the settings recommended for greatest speed:
- - "386" for the AMD/Cyrix/Intel 386DX/DXL/SL/SLC/SX, Cyrix/TI
- 486DLC/DLC2, UMC 486SX-S and NexGen Nx586. Only "386" kernels
- will run on a 386 class machine.
- - "486" for the AMD/Cyrix/IBM/Intel 486DX/DX2/DX4 or
- SL/SLC/SLC2/SLC3/SX/SX2 and UMC U5D or U5S.
- - "586" for generic Pentium CPUs lacking the TSC
- (time stamp counter) register.
- - "Pentium-Classic" for the Intel Pentium.
- - "Pentium-MMX" for the Intel Pentium MMX.
- - "Pentium-Pro" for the Intel Pentium Pro.
- - "Pentium-II" for the Intel Pentium II or pre-Coppermine Celeron.
- - "Pentium-III" for the Intel Pentium III or Coppermine Celeron.
- - "Pentium-4" for the Intel Pentium 4 or P4-based Celeron.
- - "K6" for the AMD K6, K6-II and K6-III (aka K6-3D).
- - "Athlon" for the AMD K7 family (Athlon/Duron/Thunderbird).
- - "Crusoe" for the Transmeta Crusoe series.
- - "Efficeon" for the Transmeta Efficeon series.
- - "Winchip-C6" for original IDT Winchip.
- - "Winchip-2" for IDT Winchip 2.
- - "Winchip-2A" for IDT Winchips with 3dNow! capabilities.
- - "GeodeGX1" for Geode GX1 (Cyrix MediaGX).
- - "CyrixIII/VIA C3" for VIA Cyrix III or VIA C3.
- - "VIA C3-2 for VIA C3-2 "Nehemiah" (model 9 and above).
-
- If you don't know what to do, choose "386".
-
-config M486
- bool "486"
- help
- Select this for a 486 series processor, either Intel or one of the
- compatible processors from AMD, Cyrix, IBM, or Intel. Includes DX,
- DX2, and DX4 variants; also SL/SLC/SLC2/SLC3/SX/SX2 and UMC U5D or
- U5S.
-
-config M586
- bool "586/K5/5x86/6x86/6x86MX"
- help
- Select this for an 586 or 686 series processor such as the AMD K5,
- the Cyrix 5x86, 6x86 and 6x86MX. This choice does not
- assume the RDTSC (Read Time Stamp Counter) instruction.
-
-config M586TSC
- bool "Pentium-Classic"
- help
- Select this for a Pentium Classic processor with the RDTSC (Read
- Time Stamp Counter) instruction for benchmarking.
-
-config M586MMX
- bool "Pentium-MMX"
- help
- Select this for a Pentium with the MMX graphics/multimedia
- extended instructions.
-
-config M686
- bool "Pentium-Pro"
- help
- Select this for Intel Pentium Pro chips. This enables the use of
- Pentium Pro extended instructions, and disables the init-time guard
- against the f00f bug found in earlier Pentiums.
-
-config MPENTIUMII
- bool "Pentium-II/Celeron(pre-Coppermine)"
- help
- Select this for Intel chips based on the Pentium-II and
- pre-Coppermine Celeron core. This option enables an unaligned
- copy optimization, compiles the kernel with optimization flags
- tailored for the chip, and applies any applicable Pentium Pro
- optimizations.
-
-config MPENTIUMIII
- bool "Pentium-III/Celeron(Coppermine)/Pentium-III Xeon"
- help
- Select this for Intel chips based on the Pentium-III and
- Celeron-Coppermine core. This option enables use of some
- extended prefetch instructions in addition to the Pentium II
- extensions.
-
-config MPENTIUMM
- bool "Pentium M"
- help
- Select this for Intel Pentium M (not Pentium-4 M)
- notebook chips.
-
-config MPENTIUM4
- bool "Pentium-4/Celeron(P4-based)/Pentium-4 M/Xeon"
- help
- Select this for Intel Pentium 4 chips. This includes the
- Pentium 4, P4-based Celeron and Xeon, and Pentium-4 M
- (not Pentium M) chips. This option enables compile flags
- optimized for the chip, uses the correct cache shift, and
- applies any applicable Pentium III optimizations.
-
-config MK6
- bool "K6/K6-II/K6-III"
- help
- Select this for an AMD K6-family processor. Enables use of
- some extended instructions, and passes appropriate optimization
- flags to GCC.
-
-config MK7
- bool "Athlon/Duron/K7"
- help
- Select this for an AMD Athlon K7-family processor. Enables use of
- some extended instructions, and passes appropriate optimization
- flags to GCC.
-
-config MK8
- bool "Opteron/Athlon64/Hammer/K8"
- help
- Select this for an AMD Opteron or Athlon64 Hammer-family processor. Enables
- use of some extended instructions, and passes appropriate optimization
- flags to GCC.
-
-config MCRUSOE
- bool "Crusoe"
- help
- Select this for a Transmeta Crusoe processor. Treats the processor
- like a 586 with TSC, and sets some GCC optimization flags (like a
- Pentium Pro with no alignment requirements).
-
-config MEFFICEON
- bool "Efficeon"
- help
- Select this for a Transmeta Efficeon processor.
-
-config MWINCHIPC6
- bool "Winchip-C6"
- help
- Select this for an IDT Winchip C6 chip. Linux and GCC
- treat this chip as a 586TSC with some extended instructions
- and alignment requirements.
-
-config MWINCHIP2
- bool "Winchip-2"
- help
- Select this for an IDT Winchip-2. Linux and GCC
- treat this chip as a 586TSC with some extended instructions
- and alignment requirements.
-
-config MWINCHIP3D
- bool "Winchip-2A/Winchip-3"
- help
- Select this for an IDT Winchip-2A or 3. Linux and GCC
- treat this chip as a 586TSC with some extended instructions
- and alignment reqirements. Also enable out of order memory
- stores for this CPU, which can increase performance of some
- operations.
-
-config MGEODEGX1
- bool "GeodeGX1"
- help
- Select this for a Geode GX1 (Cyrix MediaGX) chip.
-
-config MCYRIXIII
- bool "CyrixIII/VIA-C3"
- help
- Select this for a Cyrix III or C3 chip. Presently Linux and GCC
- treat this chip as a generic 586. Whilst the CPU is 686 class,
- it lacks the cmov extension which gcc assumes is present when
- generating 686 code.
- Note that Nehemiah (Model 9) and above will not boot with this
- kernel due to them lacking the 3DNow! instructions used in earlier
- incarnations of the CPU.
-
-config MVIAC3_2
- bool "VIA C3-2 (Nehemiah)"
- help
- Select this for a VIA C3 "Nehemiah". Selecting this enables usage
- of SSE and tells gcc to treat the CPU as a 686.
- Note, this kernel will not boot on older (pre model 9) C3s.
-
-endchoice
-
-config X86_GENERIC
- bool "Generic x86 support"
- help
- Instead of just including optimizations for the selected
- x86 variant (e.g. PII, Crusoe or Athlon), include some more
- generic optimizations as well. This will make the kernel
- perform better on x86 CPUs other than that selected.
-
- This is really intended for distributors who need more
- generic optimizations.
-
-endif
-
-#
-# Define implied options from the CPU selection here
-#
-config X86_CMPXCHG
- bool
- depends on !M386
- default y
-
-config X86_XADD
- bool
- depends on !M386
- default y
-
-config X86_L1_CACHE_SHIFT
- int
- default "7" if MPENTIUM4 || X86_GENERIC
- default "4" if X86_ELAN || M486 || M386
- default "5" if MWINCHIP3D || MWINCHIP2 || MWINCHIPC6 || MCRUSOE || MEFFICEON || MCYRIXIII || MK6 || MPENTIUMIII || MPENTIUMII || M686 || M586MMX || M586TSC || M586 || MVIAC3_2 || MGEODEGX1
- default "6" if MK7 || MK8 || MPENTIUMM
-
-config RWSEM_GENERIC_SPINLOCK
- bool
- depends on M386
- default y
-
-config RWSEM_XCHGADD_ALGORITHM
- bool
- depends on !M386
- default y
-
-config GENERIC_CALIBRATE_DELAY
- bool
- default y
-
-config X86_PPRO_FENCE
- bool
- depends on M686 || M586MMX || M586TSC || M586 || M486 || M386 || MGEODEGX1
- default y
-
-config X86_F00F_BUG
- bool
- depends on M586MMX || M586TSC || M586 || M486 || M386
- default y
-
-config X86_WP_WORKS_OK
- bool
- depends on !M386
- default y
-
-config X86_INVLPG
- bool
- depends on !M386
- default y
-
-config X86_BSWAP
- bool
- depends on !M386
- default y
-
-config X86_POPAD_OK
- bool
- depends on !M386
- default y
-
-config X86_ALIGNMENT_16
- bool
- depends on MWINCHIP3D || MWINCHIP2 || MWINCHIPC6 || MCYRIXIII || X86_ELAN || MK6 || M586MMX || M586TSC || M586 || M486 || MVIAC3_2 || MGEODEGX1
- default y
-
-config X86_GOOD_APIC
- bool
- depends on MK7 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || M586MMX || MK8 || MEFFICEON
- default y
-
-config X86_INTEL_USERCOPY
- bool
- depends on MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M586MMX || X86_GENERIC || MK8 || MK7 || MEFFICEON
- default y
-
-config X86_USE_PPRO_CHECKSUM
- bool
- depends on MWINCHIP3D || MWINCHIP2 || MWINCHIPC6 || MCYRIXIII || MK7 || MK6 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || MK8 || MVIAC3_2 || MEFFICEON
- default y
-
-config X86_USE_3DNOW
- bool
- depends on MCYRIXIII || MK7
- default y
-
-config X86_OOSTORE
- bool
- depends on (MWINCHIP3D || MWINCHIP2 || MWINCHIPC6) && MTRR
- default y
+source "arch/i386/Kconfig.cpu"
config HPET_TIMER
bool "HPET Timer Support"
Choose N to continue using the legacy 8254 timer.
config HPET_EMULATE_RTC
- bool "Provide RTC interrupt"
+ bool
depends on HPET_TIMER && RTC=y
-
-config SMP
- bool "Symmetric multi-processing support"
- ---help---
- This enables support for systems with more than one CPU. If you have
- a system with only one CPU, like most personal computers, say N. If
- you have a system with more than one CPU, say Y.
-
- If you say N here, the kernel will run on single and multiprocessor
- machines, but will use only one CPU of a multiprocessor machine. If
- you say Y here, the kernel will run on many, but not all,
- singleprocessor machines. On a singleprocessor machine, the kernel
- will run faster if you say N here.
-
- Note that if you say Y here and choose architecture "586" or
- "Pentium" under "Processor family", the kernel will not work on 486
- architectures. Similarly, multiprocessor kernels for the "PPro"
- architecture may not work on all Pentium based boards.
-
- People using multiprocessor machines who say Y here should also say
- Y to "Enhanced Real Time Clock Support", below. The "Advanced Power
- Management" code will be disabled if you say Y here.
-
- See also the <file:Documentation/smp.txt>,
- <file:Documentation/i386/IO-APIC.txt>,
- <file:Documentation/nmi_watchdog.txt> and the SMP-HOWTO available at
- <http://www.tldp.org/docs.html#howto>.
-
- If you don't know what to do here, say N.
+ default y
config NR_CPUS
int "Maximum number of CPUs (2-255)"
cost of slightly increased overhead in some places. If unsure say
N here.
-config PREEMPT
- bool "Preemptible Kernel"
- help
- This option reduces the latency of the kernel when reacting to
- real-time or interactive events by allowing a low priority process to
- be preempted even if it is in kernel mode executing a system call.
- This allows applications to run more reliably even when the system is
- under load.
-
- Say Y here if you are building a kernel for a desktop, embedded
- or real-time system. Say N if you are unsure.
-
-config PREEMPT_BKL
- bool "Preempt The Big Kernel Lock"
- depends on PREEMPT
+config SCHED_MC
+ bool "Multi-core scheduler support"
+ depends on SMP
default y
help
- This option reduces the latency of the kernel by making the
- big kernel lock preemptible.
+ Multi-core scheduler support improves the CPU scheduler's decision
+ making when dealing with multi-core CPU chips at a cost of slightly
+ increased overhead in some places. If unsure say N here.
- Say Y here if you are building a kernel for a desktop system.
- Say N if you are unsure.
+source "kernel/Kconfig.preempt"
config X86_UP_APIC
bool "Local APIC support on uniprocessors"
depends on X86_VISWS
default y
-config KERNEL_HZ
- int "Timer Frequency (100-10000)"
- range 100 10000
- default "1000"
- help
- This allows you to specify the frequency at which the
- kernel timer interrupt will occur.
-
-config X86_TSC
- bool
- depends on (MWINCHIP3D || MWINCHIP2 || MCRUSOE || MEFFICEON || MCYRIXIII || MK7 || MK6 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || M586MMX || M586TSC || MK8 || MVIAC3_2 || MGEODEGX1) && !X86_NUMAQ
- default y
-
config X86_MCE
bool "Machine Check Exception"
depends on !X86_VOYAGER
config NOHIGHMEM
bool "off"
+ depends on !X86_NUMAQ
---help---
Linux can use up to 64 Gigabytes of physical memory on x86 systems.
However, the address space of 32-bit x86 processors is only 4
config HIGHMEM4G
bool "4GB"
+ depends on !X86_NUMAQ
help
Select this if you have a 32-bit processor and between 1 and 4
gigabytes of physical RAM.
config HIGHMEM64G
bool "64GB"
+ depends on X86_CMPXCHG64
help
Select this if you have a 32-bit processor and more than 4
gigabytes of physical RAM.
endchoice
choice
- prompt "Memory Split User Space"
- default SPLIT_3GB
- help
- A different Userspace/Kernel split allows you to
- utilize up to alsmost 3GB of RAM without the requirement
- for HIGHMEM. It also increases the available lowmem.
-
-config SPLIT_3GB
- bool "3.0GB/1.0GB Kernel (Default)"
+ depends on EXPERIMENTAL && !X86_PAE
+ prompt "Memory split" if EMBEDDED
+ default VMSPLIT_3G
help
- This is the default split of 3GB userspace to 1GB kernel
- space, which will result in about 860MB of lowmem.
-
-config SPLIT_25GB
- bool "2.5GB/1.5GB Kernel"
- help
- This split provides 2.5GB userspace and 1.5GB kernel
- space, which will result in about 1370MB of lowmem.
-
-config SPLIT_2GB
- bool "2.0GB/2.0GB Kernel"
- help
- This split provides 2GB userspace and 2GB kernel
- space, which will result in about 1880MB of lowmem.
-
-config SPLIT_15GB
- bool "1.5GB/2.5GB Kernel"
- help
- This split provides 1.5GB userspace and 2.5GB kernel
- space, which will result in about 2390MB of lowmem.
-
-config SPLIT_1GB
- bool "1.0GB/3.0GB Kernel"
- help
- This split provides 1GB userspace and 3GB kernel
- space, which will result in about 2900MB of lowmem.
-
+ Select the desired split between kernel and user memory.
+
+ If the address range available to the kernel is less than the
+ physical memory installed, the remaining memory will be available
+ as "high memory". Accessing high memory is a little more costly
+ than low memory, as it needs to be mapped into the kernel first.
+ Note that increasing the kernel address space limits the range
+ available to user programs, making the address space there
+ tighter. Selecting anything other than the default 3G/1G split
+ will also likely make your kernel incompatible with binary-only
+ kernel modules.
+
+ If you are not absolutely sure what you are doing, leave this
+ option alone!
+
+ config VMSPLIT_3G
+ bool "3G/1G user/kernel split"
+ config VMSPLIT_3G_OPT
+ bool "3G/1G user/kernel split (for full 1G low memory)"
+ config VMSPLIT_2G
+ bool "2G/2G user/kernel split"
+ config VMSPLIT_1G
+ bool "1G/3G user/kernel split"
endchoice
+config PAGE_OFFSET
+ hex
+ default 0xB0000000 if VMSPLIT_3G_OPT
+ default 0x78000000 if VMSPLIT_2G
+ default 0x40000000 if VMSPLIT_1G
+ default 0xC0000000
+
config HIGHMEM
bool
depends on HIGHMEM64G || HIGHMEM4G
default n if X86_PC
default y if (X86_NUMAQ || X86_SUMMIT)
-# Need comments to help the hapless user trying to turn on NUMA support
-comment "NUMA (NUMA-Q) requires SMP, 64GB highmem support"
- depends on X86_NUMAQ && (!HIGHMEM64G || !SMP)
-
comment "NUMA (Summit) requires SMP, 64GB highmem support, ACPI"
depends on X86_SUMMIT && (!HIGHMEM64G || !ACPI)
-config DISCONTIGMEM
- bool
- depends on NUMA
- default y
+config NODES_SHIFT
+ int
+ default "4" if X86_NUMAQ
+ default "3"
+ depends on NEED_MULTIPLE_NODES
config HAVE_ARCH_BOOTMEM_NODE
bool
depends on NUMA
default y
-config HAVE_MEMORY_PRESENT
+config ARCH_HAVE_MEMORY_PRESENT
bool
depends on DISCONTIGMEM
default y
config NEED_NODE_MEMMAP_SIZE
bool
- depends on DISCONTIGMEM
+ depends on DISCONTIGMEM || SPARSEMEM
+ default y
+
+config HAVE_ARCH_ALLOC_REMAP
+ bool
+ depends on NUMA
+ default y
+
+config ARCH_FLATMEM_ENABLE
+ def_bool y
+ depends on (ARCH_SELECT_MEMORY_MODEL && X86_PC)
+
+config ARCH_DISCONTIGMEM_ENABLE
+ def_bool y
+ depends on NUMA
+
+config ARCH_DISCONTIGMEM_DEFAULT
+ def_bool y
+ depends on NUMA
+
+config ARCH_SPARSEMEM_ENABLE
+ def_bool y
+ depends on (NUMA || (X86_PC && EXPERIMENTAL))
+ select SPARSEMEM_STATIC
+
+config ARCH_SELECT_MEMORY_MODEL
+ def_bool y
+ depends on ARCH_SPARSEMEM_ENABLE
+
+source "mm/Kconfig"
+
+config HAVE_ARCH_EARLY_PFN_TO_NID
+ bool
default y
+ depends on NUMA
config HIGHPTE
bool "Allocate 3rd-level pagetables from highmem"
The default yes will allow the kernel to do irq load balancing.
Saying no will keep the kernel from doing irq load balancing.
-config HAVE_DEC_LOCK
- bool
- depends on (SMP || PREEMPT) && X86_CMPXCHG
- default y
-
# turning this on wastes a bunch of space.
# Summit needs it only when NUMA is on
config BOOT_IOREMAP
default y
config REGPARM
- bool "Use register arguments (EXPERIMENTAL)"
- depends on EXPERIMENTAL
- default n
+ bool "Use register arguments"
+ default y
help
- Compile the kernel with -mregparm=3. This uses a different ABI
- and passes the first three arguments of a function call in registers.
- This will probably break binary only modules.
+ Compile the kernel with -mregparm=3. This instructs gcc to use
+ a more efficient function call ABI which passes the first three
+ arguments of a function call via registers, which results in denser
+ and faster code.
+
+ If this option is disabled, then the default ABI of passing
+ arguments via the stack is used.
- This feature is only enabled for gcc-3.0 and later - earlier compilers
- generate incorrect output with certain kernel constructs when
- -mregparm=3 is used.
+ If unsure, say Y.
config SECCOMP
bool "Enable seccomp to safely compute untrusted bytecode"
If unsure, say Y. Only embedded should say N here.
+source kernel/Kconfig.hz
+
+config KEXEC
+ bool "kexec system call (EXPERIMENTAL)"
+ depends on EXPERIMENTAL
+ help
+ kexec is a system call that implements the ability to shutdown your
+ current kernel, and to start another kernel. It is like a reboot
+ but it is indepedent of the system firmware. And like a reboot
+ you can start any kernel with it, not just Linux.
+
+ The name comes from the similiarity to the exec system call.
+
+ It is an ongoing process to be certain the hardware in a machine
+ is properly shutdown, so do not be surprised if this code does not
+ initially work for you. It may help to enable device hotplugging
+ support. As of this writing the exact hardware interface is
+ strongly in flux, so no good recommendation can be made.
+
+config CRASH_DUMP
+ bool "kernel crash dumps (EXPERIMENTAL)"
+ depends on EXPERIMENTAL
+ depends on HIGHMEM
+ help
+ Generate crash dump after being started by kexec.
+
+config PHYSICAL_START
+ hex "Physical address where the kernel is loaded"
+
+ default "0x1000000" if CRASH_DUMP
+ default "0x100000"
+ help
+ This gives the physical address where the kernel is loaded. Normally
+ for regular kernels this value is 0x100000 (1MB). But in the case
+ of kexec on panic the fail safe kernel needs to run at a different
+ address than the panic-ed kernel. This option is used to set the load
+ address for kernels used to capture crash dump on being kexec'ed
+ after panic. The default value for crash dump kernels is
+ 0x1000000 (16MB). This can also be set based on the "X" value as
+ specified in the "crashkernel=YM@XM" command line boot parameter
+ passed to the panic-ed kernel. Typically this parameter is set as
+ crashkernel=64M@16M. Please take a look at
+ Documentation/kdump/kdump.txt for more details about crash dumps.
+
+ Don't change this unless you know what you are doing.
+
+config HOTPLUG_CPU
+ bool "Support for hot-pluggable CPUs (EXPERIMENTAL)"
+ depends on SMP && HOTPLUG && EXPERIMENTAL && !X86_VOYAGER
+ ---help---
+ Say Y here to experiment with turning CPUs off and on, and to
+ enable suspend on SMP systems. CPUs can be controlled through
+ /sys/devices/system/cpu.
+
+
endmenu
config PCI_MMCONFIG
bool
depends on PCI && ACPI && (PCI_GOMMCONFIG || PCI_GOANY)
- select ACPI_BOOT
default y
source "drivers/pci/pcie/Kconfig"
endmenu
+source "net/Kconfig"
+
source "drivers/Kconfig"
source "fs/Kconfig"
+menu "Instrumentation Support"
+ depends on EXPERIMENTAL
+
source "arch/i386/oprofile/Kconfig"
+config KPROBES
+ bool "Kprobes (EXPERIMENTAL)"
+ depends on EXPERIMENTAL && MODULES
+ help
+ Kprobes allows you to trap at almost any kernel address and
+ execute a callback function. register_kprobe() establishes
+ a probepoint and specifies the callback. Kprobes is useful
+ for kernel debugging, non-intrusive instrumentation and testing.
+ If in doubt, say "N".
+endmenu
+
source "arch/i386/Kconfig.debug"
source "kernel/vserver/Kconfig"
bool
default y
+config GENERIC_PENDING_IRQ
+ bool
+ depends on GENERIC_HARDIRQS && SMP
+ default y
+
config X86_SMP
bool
depends on SMP && !X86_VOYAGER
depends on X86_SMP || (X86_VOYAGER && SMP)
default y
-config PC
+config KTIME_SCALAR
bool
- depends on X86 && !EMBEDDED
default y
git://git.onelab.eu / linux-2.6.git / blobdiff