* Mikael Pettersson : PM converted to driver model.
*/
-#include <linux/config.h>
#include <linux/init.h>
#include <linux/mm.h>
#include <asm/arch_hooks.h>
#include <asm/hpet.h>
#include <asm/i8253.h>
+#include <asm/nmi.h>
#include <mach_apic.h>
+#include <mach_apicdef.h>
#include <mach_ipi.h>
#include "io_ports.h"
/*
* Knob to control our willingness to enable the local APIC.
*/
-int enable_local_apic __initdata = 0; /* -1=force-disable, +1=force-enable */
+static int enable_local_apic __initdata = 0; /* -1=force-disable, +1=force-enable */
+
+static inline void lapic_disable(void)
+{
+ enable_local_apic = -1;
+ clear_bit(X86_FEATURE_APIC, boot_cpu_data.x86_capability);
+}
+
+static inline void lapic_enable(void)
+{
+ enable_local_apic = 1;
+}
/*
* Debug level
static void apic_pm_activate(void);
+static int modern_apic(void)
+{
+ unsigned int lvr, version;
+ /* AMD systems use old APIC versions, so check the CPU */
+ if (boot_cpu_data.x86_vendor == X86_VENDOR_AMD &&
+ boot_cpu_data.x86 >= 0xf)
+ return 1;
+ lvr = apic_read(APIC_LVR);
+ version = GET_APIC_VERSION(lvr);
+ return version >= 0x14;
+}
+
/*
* 'what should we do if we get a hw irq event on an illegal vector'.
* each architecture has to answer this themselves.
}
/* Using APIC to generate smp_local_timer_interrupt? */
-int using_apic_timer = 0;
+int using_apic_timer __read_mostly = 0;
static int enabled_via_apicbase;
int get_physical_broadcast(void)
{
- unsigned int lvr, version;
- lvr = apic_read(APIC_LVR);
- version = GET_APIC_VERSION(lvr);
- if (!APIC_INTEGRATED(version) || version >= 0x14)
+ if (modern_apic())
return 0xff;
else
return 0xf;
maxlvt = get_maxlvt();
/*
- * Masking an LVT entry on a P6 can trigger a local APIC error
+ * Masking an LVT entry can trigger a local APIC error
* if the vector is zero. Mask LVTERR first to prevent this.
*/
if (maxlvt >= 3) {
void __init sync_Arb_IDs(void)
{
- /* Unsupported on P4 - see Intel Dev. Manual Vol. 3, Ch. 8.6.1 */
- unsigned int ver = GET_APIC_VERSION(apic_read(APIC_LVR));
- if (ver >= 0x14) /* P4 or higher */
+ /* Unsupported on P4 - see Intel Dev. Manual Vol. 3, Ch. 8.6.1
+ And not needed on AMD */
+ if (modern_apic())
return;
/*
* Wait for idle.
void __devinit setup_local_APIC(void)
{
unsigned long oldvalue, value, ver, maxlvt;
+ int i, j;
/* Pound the ESR really hard over the head with a big hammer - mbligh */
if (esr_disable) {
value &= ~APIC_TPRI_MASK;
apic_write_around(APIC_TASKPRI, value);
+ /*
+ * After a crash, we no longer service the interrupts and a pending
+ * interrupt from previous kernel might still have ISR bit set.
+ *
+ * Most probably by now CPU has serviced that pending interrupt and
+ * it might not have done the ack_APIC_irq() because it thought,
+ * interrupt came from i8259 as ExtInt. LAPIC did not get EOI so it
+ * does not clear the ISR bit and cpu thinks it has already serivced
+ * the interrupt. Hence a vector might get locked. It was noticed
+ * for timer irq (vector 0x31). Issue an extra EOI to clear ISR.
+ */
+ for (i = APIC_ISR_NR - 1; i >= 0; i--) {
+ value = apic_read(APIC_ISR + i*0x10);
+ for (j = 31; j >= 0; j--) {
+ if (value & (1<<j))
+ ack_APIC_irq();
+ }
+ }
+
/*
* Now that we are all set up, enable the APIC
*/
printk("No ESR for 82489DX.\n");
}
- if (nmi_watchdog == NMI_LOCAL_APIC)
- setup_apic_nmi_watchdog();
+ setup_apic_nmi_watchdog(NULL);
apic_pm_activate();
}
static int lapic_suspend(struct sys_device *dev, pm_message_t state)
{
unsigned long flags;
+ int maxlvt;
if (!apic_pm_state.active)
return 0;
+ maxlvt = get_maxlvt();
+
apic_pm_state.apic_id = apic_read(APIC_ID);
apic_pm_state.apic_taskpri = apic_read(APIC_TASKPRI);
apic_pm_state.apic_ldr = apic_read(APIC_LDR);
apic_pm_state.apic_dfr = apic_read(APIC_DFR);
apic_pm_state.apic_spiv = apic_read(APIC_SPIV);
apic_pm_state.apic_lvtt = apic_read(APIC_LVTT);
- apic_pm_state.apic_lvtpc = apic_read(APIC_LVTPC);
+ if (maxlvt >= 4)
+ apic_pm_state.apic_lvtpc = apic_read(APIC_LVTPC);
apic_pm_state.apic_lvt0 = apic_read(APIC_LVT0);
apic_pm_state.apic_lvt1 = apic_read(APIC_LVT1);
apic_pm_state.apic_lvterr = apic_read(APIC_LVTERR);
apic_pm_state.apic_tmict = apic_read(APIC_TMICT);
apic_pm_state.apic_tdcr = apic_read(APIC_TDCR);
- apic_pm_state.apic_thmr = apic_read(APIC_LVTTHMR);
+#ifdef CONFIG_X86_MCE_P4THERMAL
+ if (maxlvt >= 5)
+ apic_pm_state.apic_thmr = apic_read(APIC_LVTTHMR);
+#endif
local_irq_save(flags);
disable_local_APIC();
{
unsigned int l, h;
unsigned long flags;
+ int maxlvt;
if (!apic_pm_state.active)
return 0;
+ maxlvt = get_maxlvt();
+
local_irq_save(flags);
/*
apic_write(APIC_SPIV, apic_pm_state.apic_spiv);
apic_write(APIC_LVT0, apic_pm_state.apic_lvt0);
apic_write(APIC_LVT1, apic_pm_state.apic_lvt1);
- apic_write(APIC_LVTTHMR, apic_pm_state.apic_thmr);
- apic_write(APIC_LVTPC, apic_pm_state.apic_lvtpc);
+#ifdef CONFIG_X86_MCE_P4THERMAL
+ if (maxlvt >= 5)
+ apic_write(APIC_LVTTHMR, apic_pm_state.apic_thmr);
+#endif
+ if (maxlvt >= 4)
+ apic_write(APIC_LVTPC, apic_pm_state.apic_lvtpc);
apic_write(APIC_LVTT, apic_pm_state.apic_lvtt);
apic_write(APIC_TDCR, apic_pm_state.apic_tdcr);
apic_write(APIC_TMICT, apic_pm_state.apic_tmict);
apic_verbosity = APIC_DEBUG;
else if (strcmp("verbose", str) == 0)
apic_verbosity = APIC_VERBOSE;
- else
- printk(KERN_WARNING "APIC Verbosity level %s not recognised"
- " use apic=verbose or apic=debug\n", str);
-
- return 0;
+ return 1;
}
__setup("apic=", apic_set_verbosity);
unsigned long v;
v = apic_read(APIC_LVTT);
- apic_write_around(APIC_LVTT, v | APIC_LVT_MASKED);
+ /*
+ * When an illegal vector value (0-15) is written to an LVT
+ * entry and delivery mode is Fixed, the APIC may signal an
+ * illegal vector error, with out regard to whether the mask
+ * bit is set or whether an interrupt is actually seen on input.
+ *
+ * Boot sequence might call this function when the LVTT has
+ * '0' vector value. So make sure vector field is set to
+ * valid value.
+ */
+ v |= (APIC_LVT_MASKED | LOCAL_TIMER_VECTOR);
+ apic_write_around(APIC_LVTT, v);
}
}
* value into /proc/profile.
*/
-inline void smp_local_timer_interrupt(struct pt_regs * regs)
+inline void smp_local_timer_interrupt(void)
{
- profile_tick(CPU_PROFILING, regs);
+ profile_tick(CPU_PROFILING);
#ifdef CONFIG_SMP
- update_process_times(user_mode_vm(regs));
+ update_process_times(user_mode_vm(get_irq_regs()));
#endif
/*
fastcall void smp_apic_timer_interrupt(struct pt_regs *regs)
{
+ struct pt_regs *old_regs = set_irq_regs(regs);
int cpu = smp_processor_id();
/*
* interrupt lock, which is the WrongThing (tm) to do.
*/
irq_enter();
- smp_local_timer_interrupt(regs);
+ smp_local_timer_interrupt();
irq_exit();
+ set_irq_regs(old_regs);
}
#ifndef CONFIG_SMP
-static void up_apic_timer_interrupt_call(struct pt_regs *regs)
+static void up_apic_timer_interrupt_call(void)
{
int cpu = smp_processor_id();
*/
per_cpu(irq_stat, cpu).apic_timer_irqs++;
- smp_local_timer_interrupt(regs);
+ smp_local_timer_interrupt();
}
#endif
-void smp_send_timer_broadcast_ipi(struct pt_regs *regs)
+void smp_send_timer_broadcast_ipi(void)
{
cpumask_t mask;
* We can directly call the apic timer interrupt handler
* in UP case. Minus all irq related functions
*/
- up_apic_timer_interrupt_call(regs);
+ up_apic_timer_interrupt_call();
#endif
}
}
connect_bsp_APIC();
+ /*
+ * Hack: In case of kdump, after a crash, kernel might be booting
+ * on a cpu with non-zero lapic id. But boot_cpu_physical_apicid
+ * might be zero if read from MP tables. Get it from LAPIC.
+ */
+#ifdef CONFIG_CRASH_DUMP
+ boot_cpu_physical_apicid = GET_APIC_ID(apic_read(APIC_ID));
+#endif
phys_cpu_present_map = physid_mask_of_physid(boot_cpu_physical_apicid);
setup_local_APIC();
return 0;
}
+
+static int __init parse_lapic(char *arg)
+{
+ lapic_enable();
+ return 0;
+}
+early_param("lapic", parse_lapic);
+
+static int __init parse_nolapic(char *arg)
+{
+ lapic_disable();
+ return 0;
+}
+early_param("nolapic", parse_nolapic);
+
git://git.onelab.eu / linux-2.6.git / blobdiff