vserver 1.9.5.x5
[linux-2.6.git] / arch / i386 / kernel / cpu / cpufreq / p4-clockmod.c
index ef13949..aa622d5 100644 (file)
@@ -36,6 +36,7 @@
 #include "speedstep-lib.h"
 
 #define PFX    "p4-clockmod: "
+#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "p4-clockmod", msg)
 
 /*
  * Duty Cycle (3bits), note DC_DISABLE is not specified in
@@ -62,20 +63,20 @@ static int cpufreq_p4_setdc(unsigned int cpu, unsigned int newstate)
                return -EINVAL;
 
        rdmsr(MSR_IA32_THERM_STATUS, l, h);
-#if 0
+
        if (l & 0x01)
-               printk(KERN_DEBUG PFX "CPU#%d currently thermal throttled\n", cpu);
-#endif
+               dprintk("CPU#%d currently thermal throttled\n", cpu);
+
        if (has_N44_O17_errata[cpu] && (newstate == DC_25PT || newstate == DC_DFLT))
                newstate = DC_38PT;
 
        rdmsr(MSR_IA32_THERM_CONTROL, l, h);
        if (newstate == DC_DISABLE) {
-               /* printk(KERN_INFO PFX "CPU#%d disabling modulation\n", cpu); */
+               dprintk("CPU#%d disabling modulation\n", cpu);
                wrmsr(MSR_IA32_THERM_CONTROL, l & ~(1<<4), h);
        } else {
-               /* printk(KERN_INFO PFX "CPU#%d setting duty cycle to %d%%\n",
-                       cpu, ((125 * newstate) / 10)); */
+               dprintk("CPU#%d setting duty cycle to %d%%\n",
+                       cpu, ((125 * newstate) / 10));
                /* bits 63 - 5  : reserved 
                 * bit  4       : enable/disable
                 * bits 3-1     : duty cycle
@@ -110,7 +111,7 @@ static int cpufreq_p4_target(struct cpufreq_policy *policy,
 {
        unsigned int    newstate = DC_RESV;
        struct cpufreq_freqs freqs;
-       cpumask_t cpus_allowed, affected_cpu_map;
+       cpumask_t cpus_allowed;
        int i;
 
        if (cpufreq_frequency_table_target(policy, &p4clockmod_table[0], target_freq, relation, &newstate))
@@ -122,18 +123,8 @@ static int cpufreq_p4_target(struct cpufreq_policy *policy,
        if (freqs.new == freqs.old)
                return 0;
 
-       /* switch to physical CPU where state is to be changed*/
-       cpus_allowed = current->cpus_allowed;
-
-       /* only run on CPU to be set, or on its sibling */
-#ifdef CONFIG_SMP
-       affected_cpu_map = cpu_sibling_map[policy->cpu];
-#else
-       affected_cpu_map = cpumask_of_cpu(policy->cpu);
-#endif
-
        /* notifiers */
-       for_each_cpu_mask(i, affected_cpu_map) {
+       for_each_cpu_mask(i, policy->cpus) {
                freqs.cpu = i;
                cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
        }
@@ -141,7 +132,9 @@ static int cpufreq_p4_target(struct cpufreq_policy *policy,
        /* run on each logical CPU, see section 13.15.3 of IA32 Intel Architecture Software
         * Developer's Manual, Volume 3 
         */
-       for_each_cpu_mask(i, affected_cpu_map) {
+       cpus_allowed = current->cpus_allowed;
+
+       for_each_cpu_mask(i, policy->cpus) {
                cpumask_t this_cpu = cpumask_of_cpu(i);
 
                set_cpus_allowed(current, this_cpu);
@@ -152,7 +145,7 @@ static int cpufreq_p4_target(struct cpufreq_policy *policy,
        set_cpus_allowed(current, cpus_allowed);
 
        /* notifiers */
-       for_each_cpu_mask(i, affected_cpu_map) {
+       for_each_cpu_mask(i, policy->cpus) {
                freqs.cpu = i;
                cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
        }
@@ -178,7 +171,7 @@ static unsigned int cpufreq_p4_get_frequency(struct cpuinfo_x86 *c)
                return speedstep_get_processor_frequency(SPEEDSTEP_PROCESSOR_PM);
        }
 
-       if ((c->x86 == 0x06) && (c->x86_model == 0x13)) {
+       if ((c->x86 == 0x06) && (c->x86_model == 0x0D)) {
                /* Pentium M (Dothan) */
                printk(KERN_WARNING PFX "Warning: Pentium M detected. "
                       "The speedstep_centrino module offers voltage scaling"
@@ -219,6 +212,10 @@ static int cpufreq_p4_cpu_init(struct cpufreq_policy *policy)
        int cpuid = 0;
        unsigned int i;
 
+#ifdef CONFIG_SMP
+       policy->cpus = cpu_sibling_map[policy->cpu];
+#endif
+
        /* Errata workaround */
        cpuid = (c->x86 << 8) | (c->x86_model << 4) | c->x86_mask;
        switch (cpuid) {
@@ -227,6 +224,7 @@ static int cpufreq_p4_cpu_init(struct cpufreq_policy *policy)
        case 0x0f11:
        case 0x0f12:
                has_N44_O17_errata[policy->cpu] = 1;
+               dprintk("has errata -- disabling low frequencies\n");
        }
        
        /* get max frequency */
@@ -260,14 +258,13 @@ static int cpufreq_p4_cpu_exit(struct cpufreq_policy *policy)
 
 static unsigned int cpufreq_p4_get(unsigned int cpu)
 {
-       cpumask_t cpus_allowed, affected_cpu_map;
+       cpumask_t cpus_allowed;
        u32 l, h;
 
        cpus_allowed = current->cpus_allowed;
-        affected_cpu_map = cpumask_of_cpu(cpu);
 
-       set_cpus_allowed(current, affected_cpu_map);
-        BUG_ON(!cpu_isset(smp_processor_id(), affected_cpu_map));
+       set_cpus_allowed(current, cpumask_of_cpu(cpu));
+       BUG_ON(smp_processor_id() != cpu);
 
        rdmsr(MSR_IA32_THERM_CONTROL, l, h);
 
@@ -305,6 +302,7 @@ static struct cpufreq_driver p4clockmod_driver = {
 static int __init cpufreq_p4_init(void)
 {      
        struct cpuinfo_x86 *c = cpu_data;
+       int ret;
 
        /*
         * THERM_CONTROL is architectural for IA32 now, so 
@@ -317,9 +315,11 @@ static int __init cpufreq_p4_init(void)
                !test_bit(X86_FEATURE_ACC, c->x86_capability))
                return -ENODEV;
 
-       printk(KERN_INFO PFX "P4/Xeon(TM) CPU On-Demand Clock Modulation available\n");
+       ret = cpufreq_register_driver(&p4clockmod_driver);
+       if (!ret)
+               printk(KERN_INFO PFX "P4/Xeon(TM) CPU On-Demand Clock Modulation available\n");
 
-       return cpufreq_register_driver(&p4clockmod_driver);
+       return (ret);
 }
 
 
@@ -335,4 +335,3 @@ MODULE_LICENSE ("GPL");
 
 late_initcall(cpufreq_p4_init);
 module_exit(cpufreq_p4_exit);
-