* "current" is in register %ebx during any slow entries.
*/
-#include <linux/config.h>
#include <linux/linkage.h>
#include <asm/thread_info.h>
+#include <asm/irqflags.h>
#include <asm/errno.h>
#include <asm/segment.h>
#include <asm/smp.h>
#include <asm/page.h>
#include <asm/desc.h>
+#include <asm/dwarf2.h>
#include "irq_vectors.h"
#include <xen/interface/xen.h>
#endif
#ifdef CONFIG_PREEMPT
-#define preempt_stop cli
+#define preempt_stop cli; TRACE_IRQS_OFF
#else
#define preempt_stop
#define resume_kernel restore_nocheck
#endif
+.macro TRACE_IRQS_IRET
+#ifdef CONFIG_TRACE_IRQFLAGS
+ testl $IF_MASK,EFLAGS(%esp) # interrupts off?
+ jz 1f
+ TRACE_IRQS_ON
+1:
+#endif
+.endm
+
+#ifdef CONFIG_VM86
+#define resume_userspace_sig check_userspace
+#else
+#define resume_userspace_sig resume_userspace
+#endif
+
#define SAVE_ALL \
cld; \
pushl %es; \
+ CFI_ADJUST_CFA_OFFSET 4;\
+ /*CFI_REL_OFFSET es, 0;*/\
pushl %ds; \
+ CFI_ADJUST_CFA_OFFSET 4;\
+ /*CFI_REL_OFFSET ds, 0;*/\
pushl %eax; \
+ CFI_ADJUST_CFA_OFFSET 4;\
+ CFI_REL_OFFSET eax, 0;\
pushl %ebp; \
+ CFI_ADJUST_CFA_OFFSET 4;\
+ CFI_REL_OFFSET ebp, 0;\
pushl %edi; \
+ CFI_ADJUST_CFA_OFFSET 4;\
+ CFI_REL_OFFSET edi, 0;\
pushl %esi; \
+ CFI_ADJUST_CFA_OFFSET 4;\
+ CFI_REL_OFFSET esi, 0;\
pushl %edx; \
+ CFI_ADJUST_CFA_OFFSET 4;\
+ CFI_REL_OFFSET edx, 0;\
pushl %ecx; \
+ CFI_ADJUST_CFA_OFFSET 4;\
+ CFI_REL_OFFSET ecx, 0;\
pushl %ebx; \
+ CFI_ADJUST_CFA_OFFSET 4;\
+ CFI_REL_OFFSET ebx, 0;\
movl $(__USER_DS), %edx; \
movl %edx, %ds; \
movl %edx, %es;
#define RESTORE_INT_REGS \
popl %ebx; \
+ CFI_ADJUST_CFA_OFFSET -4;\
+ CFI_RESTORE ebx;\
popl %ecx; \
+ CFI_ADJUST_CFA_OFFSET -4;\
+ CFI_RESTORE ecx;\
popl %edx; \
+ CFI_ADJUST_CFA_OFFSET -4;\
+ CFI_RESTORE edx;\
popl %esi; \
+ CFI_ADJUST_CFA_OFFSET -4;\
+ CFI_RESTORE esi;\
popl %edi; \
+ CFI_ADJUST_CFA_OFFSET -4;\
+ CFI_RESTORE edi;\
popl %ebp; \
- popl %eax
+ CFI_ADJUST_CFA_OFFSET -4;\
+ CFI_RESTORE ebp;\
+ popl %eax; \
+ CFI_ADJUST_CFA_OFFSET -4;\
+ CFI_RESTORE eax
#define RESTORE_REGS \
RESTORE_INT_REGS; \
1: popl %ds; \
+ CFI_ADJUST_CFA_OFFSET -4;\
+ /*CFI_RESTORE ds;*/\
2: popl %es; \
+ CFI_ADJUST_CFA_OFFSET -4;\
+ /*CFI_RESTORE es;*/\
.section .fixup,"ax"; \
3: movl $0,(%esp); \
jmp 1b; \
.long 2b,4b; \
.previous
+#define RING0_INT_FRAME \
+ CFI_STARTPROC simple;\
+ CFI_DEF_CFA esp, 3*4;\
+ /*CFI_OFFSET cs, -2*4;*/\
+ CFI_OFFSET eip, -3*4
+
+#define RING0_EC_FRAME \
+ CFI_STARTPROC simple;\
+ CFI_DEF_CFA esp, 4*4;\
+ /*CFI_OFFSET cs, -2*4;*/\
+ CFI_OFFSET eip, -3*4
+
+#define RING0_PTREGS_FRAME \
+ CFI_STARTPROC simple;\
+ CFI_DEF_CFA esp, OLDESP-EBX;\
+ /*CFI_OFFSET cs, CS-OLDESP;*/\
+ CFI_OFFSET eip, EIP-OLDESP;\
+ /*CFI_OFFSET es, ES-OLDESP;*/\
+ /*CFI_OFFSET ds, DS-OLDESP;*/\
+ CFI_OFFSET eax, EAX-OLDESP;\
+ CFI_OFFSET ebp, EBP-OLDESP;\
+ CFI_OFFSET edi, EDI-OLDESP;\
+ CFI_OFFSET esi, ESI-OLDESP;\
+ CFI_OFFSET edx, EDX-OLDESP;\
+ CFI_OFFSET ecx, ECX-OLDESP;\
+ CFI_OFFSET ebx, EBX-OLDESP
ENTRY(ret_from_fork)
+ CFI_STARTPROC
pushl %eax
+ CFI_ADJUST_CFA_OFFSET 4
call schedule_tail
GET_THREAD_INFO(%ebp)
popl %eax
+ CFI_ADJUST_CFA_OFFSET -4
+ pushl $0x0202 # Reset kernel eflags
+ CFI_ADJUST_CFA_OFFSET 4
+ popfl
+ CFI_ADJUST_CFA_OFFSET -4
jmp syscall_exit
+ CFI_ENDPROC
/*
* Return to user mode is not as complex as all this looks,
# userspace resumption stub bypassing syscall exit tracing
ALIGN
+ RING0_PTREGS_FRAME
ret_from_exception:
preempt_stop
ret_from_intr:
GET_THREAD_INFO(%ebp)
+check_userspace:
movl EFLAGS(%esp), %eax # mix EFLAGS and CS
movb CS(%esp), %al
testl $(VM_MASK | 2), %eax
call preempt_schedule_irq
jmp need_resched
#endif
+ CFI_ENDPROC
/* SYSENTER_RETURN points to after the "sysenter" instruction in
the vsyscall page. See vsyscall-sysentry.S, which defines the symbol. */
# sysenter call handler stub
ENTRY(sysenter_entry)
+ CFI_STARTPROC simple
+ CFI_DEF_CFA esp, 0
+ CFI_REGISTER esp, ebp
movl SYSENTER_stack_esp0(%esp),%esp
sysenter_past_esp:
+ /*
+ * No need to follow this irqs on/off section: the syscall
+ * disabled irqs and here we enable it straight after entry:
+ */
sti
pushl $(__USER_DS)
+ CFI_ADJUST_CFA_OFFSET 4
+ /*CFI_REL_OFFSET ss, 0*/
pushl %ebp
+ CFI_ADJUST_CFA_OFFSET 4
+ CFI_REL_OFFSET esp, 0
pushfl
+ CFI_ADJUST_CFA_OFFSET 4
pushl $(__USER_CS)
+ CFI_ADJUST_CFA_OFFSET 4
+ /*CFI_REL_OFFSET cs, 0*/
/*
* Push current_thread_info()->sysenter_return to the stack.
* A tiny bit of offset fixup is necessary - 4*4 means the 4 words
* pushed above; +8 corresponds to copy_thread's esp0 setting.
*/
pushl (TI_sysenter_return-THREAD_SIZE+8+4*4)(%esp)
+ CFI_ADJUST_CFA_OFFSET 4
+ CFI_REL_OFFSET eip, 0
+
/*
* Load the potential sixth argument from user stack.
* Careful about security.
.previous
pushl %eax
+ CFI_ADJUST_CFA_OFFSET 4
SAVE_ALL
GET_THREAD_INFO(%ebp)
/* Note, _TIF_SECCOMP is bit number 8, and so it needs testw and not testb */
- testw $(_TIF_SYSCALL_EMU|_TIF_SYSCALL_TRACE|_TIF_SECCOMP|_TIF_SYSCALL_AUDIT),TI_flags(%ebp)
+ testw $(_TIF_SYSCALL_TRACE|_TIF_SECCOMP|_TIF_SYSCALL_AUDIT),TI_flags(%ebp)
jnz syscall_trace_entry
cmpl $(nr_syscalls), %eax
jae syscall_badsys
call *sys_call_table(,%eax,4)
movl %eax,EAX(%esp)
DISABLE_INTERRUPTS
+ TRACE_IRQS_OFF
movl TI_flags(%ebp), %ecx
testw $_TIF_ALLWORK_MASK, %cx
jne syscall_exit_work
movl EIP(%esp), %edx
movl OLDESP(%esp), %ecx
xorl %ebp,%ebp
+ TRACE_IRQS_ON
#ifdef CONFIG_XEN
__ENABLE_INTERRUPTS
sysexit_scrit: /**** START OF SYSEXIT CRITICAL REGION ****/
14: __DISABLE_INTERRUPTS
sysexit_ecrit: /**** END OF SYSEXIT CRITICAL REGION ****/
push %esp
+ CFI_ADJUST_CFA_OFFSET 4
call evtchn_do_upcall
add $4,%esp
+ CFI_ADJUST_CFA_OFFSET -4
jmp ret_from_intr
#else
sti
sysexit
#endif /* !CONFIG_XEN */
+ CFI_ENDPROC
# system call handler stub
ENTRY(system_call)
+ RING0_INT_FRAME # can't unwind into user space anyway
pushl %eax # save orig_eax
+ CFI_ADJUST_CFA_OFFSET 4
SAVE_ALL
GET_THREAD_INFO(%ebp)
testl $TF_MASK,EFLAGS(%esp)
no_singlestep:
# system call tracing in operation / emulation
/* Note, _TIF_SECCOMP is bit number 8, and so it needs testw and not testb */
- testw $(_TIF_SYSCALL_EMU|_TIF_SYSCALL_TRACE|_TIF_SECCOMP|_TIF_SYSCALL_AUDIT),TI_flags(%ebp)
+ testw $(_TIF_SYSCALL_TRACE|_TIF_SECCOMP|_TIF_SYSCALL_AUDIT),TI_flags(%ebp)
jnz syscall_trace_entry
cmpl $(nr_syscalls), %eax
jae syscall_badsys
DISABLE_INTERRUPTS # make sure we don't miss an interrupt
# setting need_resched or sigpending
# between sampling and the iret
+ TRACE_IRQS_OFF
movl TI_flags(%ebp), %ecx
testw $_TIF_ALLWORK_MASK, %cx # current->work
jne syscall_exit_work
andb $1,%al # EAX[0] == IRET_EFLAGS.IF & event_mask
jnz restore_all_enable_events # != 0 => enable event delivery
#endif
+ TRACE_IRQS_IRET
+ CFI_REMEMBER_STATE
+restore_nocheck_notrace:
RESTORE_REGS
addl $4, %esp
+ CFI_ADJUST_CFA_OFFSET -4
1: iret
.section .fixup,"ax"
iret_exc:
#ifndef CONFIG_XEN
+ TRACE_IRQS_ON
sti
#endif
pushl $0 # no error code
.long 1b,iret_exc
.previous
+ CFI_RESTORE_STATE
#ifndef CONFIG_XEN
ldt_ss:
larl OLDSS(%esp), %eax
* CPUs, which we can try to work around to make
* dosemu and wine happy. */
subl $8, %esp # reserve space for switch16 pointer
+ CFI_ADJUST_CFA_OFFSET 8
cli
+ TRACE_IRQS_OFF
movl %esp, %eax
/* Set up the 16bit stack frame with switch32 pointer on top,
* and a switch16 pointer on top of the current frame. */
call setup_x86_bogus_stack
+ CFI_ADJUST_CFA_OFFSET -8 # frame has moved
+ TRACE_IRQS_IRET
RESTORE_REGS
lss 20+4(%esp), %esp # switch to 16bit stack
1: iret
addl $4, %esp
jmp hypercall_page + (__HYPERVISOR_iret * 32)
#endif
+ CFI_ENDPROC
# perform work that needs to be done immediately before resumption
ALIGN
+ RING0_PTREGS_FRAME # can't unwind into user space anyway
work_pending:
testb $_TIF_NEED_RESCHED, %cl
jz work_notifysig
DISABLE_INTERRUPTS # make sure we don't miss an interrupt
# setting need_resched or sigpending
# between sampling and the iret
+ TRACE_IRQS_OFF
movl TI_flags(%ebp), %ecx
andl $_TIF_WORK_MASK, %ecx # is there any work to be done other
# than syscall tracing?
# vm86-space
xorl %edx, %edx
call do_notify_resume
- jmp resume_userspace
+ jmp resume_userspace_sig
ALIGN
work_notifysig_v86:
#ifdef CONFIG_VM86
pushl %ecx # save ti_flags for do_notify_resume
+ CFI_ADJUST_CFA_OFFSET 4
call save_v86_state # %eax contains pt_regs pointer
popl %ecx
+ CFI_ADJUST_CFA_OFFSET -4
movl %eax, %esp
xorl %edx, %edx
call do_notify_resume
- jmp resume_userspace
+ jmp resume_userspace_sig
#endif
# perform syscall exit tracing
movl %esp, %eax
xorl %edx,%edx
call do_syscall_trace
- cmpl $0, %eax
- jne resume_userspace # ret != 0 -> running under PTRACE_SYSEMU,
- # so must skip actual syscall
movl ORIG_EAX(%esp), %eax
cmpl $(nr_syscalls), %eax
jnae syscall_call
syscall_exit_work:
testb $(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT|_TIF_SINGLESTEP), %cl
jz work_pending
+ TRACE_IRQS_ON
ENABLE_INTERRUPTS # could let do_syscall_trace() call
# schedule() instead
movl %esp, %eax
movl $1, %edx
call do_syscall_trace
jmp resume_userspace
+ CFI_ENDPROC
- ALIGN
+ RING0_INT_FRAME # can't unwind into user space anyway
syscall_fault:
pushl %eax # save orig_eax
+ CFI_ADJUST_CFA_OFFSET 4
SAVE_ALL
GET_THREAD_INFO(%ebp)
movl $-EFAULT,EAX(%esp)
jmp resume_userspace
- ALIGN
syscall_badsys:
movl $-ENOSYS,EAX(%esp)
jmp resume_userspace
+ CFI_ENDPROC
#ifndef CONFIG_XEN
#define FIXUP_ESPFIX_STACK \
movl %eax, %esp;
#define UNWIND_ESPFIX_STACK \
pushl %eax; \
+ CFI_ADJUST_CFA_OFFSET 4; \
movl %ss, %eax; \
/* see if on 16bit stack */ \
cmpw $__ESPFIX_SS, %ax; \
- jne 28f; \
- movl $__KERNEL_DS, %edx; \
- movl %edx, %ds; \
- movl %edx, %es; \
+ je 28f; \
+27: popl %eax; \
+ CFI_ADJUST_CFA_OFFSET -4; \
+.section .fixup,"ax"; \
+28: movl $__KERNEL_DS, %eax; \
+ movl %eax, %ds; \
+ movl %eax, %es; \
/* switch to 32bit stack */ \
- FIXUP_ESPFIX_STACK \
-28: popl %eax;
+ FIXUP_ESPFIX_STACK; \
+ jmp 27b; \
+.previous
/*
* Build the entry stubs and pointer table with
vector=0
ENTRY(irq_entries_start)
+ RING0_INT_FRAME
.rept NR_IRQS
ALIGN
+ .if vector
+ CFI_ADJUST_CFA_OFFSET -4
+ .endif
1: pushl $~(vector)
+ CFI_ADJUST_CFA_OFFSET 4
jmp common_interrupt
.data
.long 1b
vector=vector+1
.endr
+/*
+ * the CPU automatically disables interrupts when executing an IRQ vector,
+ * so IRQ-flags tracing has to follow that:
+ */
ALIGN
common_interrupt:
SAVE_ALL
+ TRACE_IRQS_OFF
movl %esp,%eax
call do_IRQ
jmp ret_from_intr
+ CFI_ENDPROC
#define BUILD_INTERRUPT(name, nr) \
ENTRY(name) \
- pushl $~(nr); \
SAVE_ALL \
+ RING0_INT_FRAME; \
+ pushl $~(nr); \
+ CFI_ADJUST_CFA_OFFSET 4; \
+ SAVE_ALL; \
+ TRACE_IRQS_OFF \
movl %esp,%eax; \
call smp_/**/name; \
- jmp ret_from_intr;
+ jmp ret_from_intr; \
+ CFI_ENDPROC
/* The include is where all of the SMP etc. interrupts come from */
#include "entry_arch.h"
#endif
ENTRY(divide_error)
+ RING0_INT_FRAME
pushl $0 # no error code
+ CFI_ADJUST_CFA_OFFSET 4
pushl $do_divide_error
+ CFI_ADJUST_CFA_OFFSET 4
ALIGN
error_code:
pushl %ds
+ CFI_ADJUST_CFA_OFFSET 4
+ /*CFI_REL_OFFSET ds, 0*/
pushl %eax
+ CFI_ADJUST_CFA_OFFSET 4
+ CFI_REL_OFFSET eax, 0
xorl %eax, %eax
pushl %ebp
+ CFI_ADJUST_CFA_OFFSET 4
+ CFI_REL_OFFSET ebp, 0
pushl %edi
+ CFI_ADJUST_CFA_OFFSET 4
+ CFI_REL_OFFSET edi, 0
pushl %esi
+ CFI_ADJUST_CFA_OFFSET 4
+ CFI_REL_OFFSET esi, 0
pushl %edx
+ CFI_ADJUST_CFA_OFFSET 4
+ CFI_REL_OFFSET edx, 0
decl %eax # eax = -1
pushl %ecx
+ CFI_ADJUST_CFA_OFFSET 4
+ CFI_REL_OFFSET ecx, 0
pushl %ebx
+ CFI_ADJUST_CFA_OFFSET 4
+ CFI_REL_OFFSET ebx, 0
cld
pushl %es
+ CFI_ADJUST_CFA_OFFSET 4
+ /*CFI_REL_OFFSET es, 0*/
UNWIND_ESPFIX_STACK
popl %ecx
+ CFI_ADJUST_CFA_OFFSET -4
+ /*CFI_REGISTER es, ecx*/
movl ES(%esp), %edi # get the function address
movl ORIG_EAX(%esp), %edx # get the error code
movl %eax, ORIG_EAX(%esp)
movl %ecx, ES(%esp)
+ /*CFI_REL_OFFSET es, ES*/
movl $(__USER_DS), %ecx
movl %ecx, %ds
movl %ecx, %es
movl %esp,%eax # pt_regs pointer
call *%edi
jmp ret_from_exception
+ CFI_ENDPROC
#ifdef CONFIG_XEN
# A note on the "critical region" in our callback handler.
# critical region we know that the entire frame is present and correct
# so we can simply throw away the new one.
ENTRY(hypervisor_callback)
+ RING0_INT_FRAME
pushl %eax
+ CFI_ADJUST_CFA_OFFSET 4
SAVE_ALL
movl EIP(%esp),%eax
cmpl $scrit,%eax
jb 11f
cmpl $sysexit_ecrit,%eax
ja 11f
+ # interrupted in sysexit critical
addl $0x34,%esp # Remove cs...ebx from stack frame.
+ # this popped off new frame to reuse the old one, therefore no
+ # CFI_ADJUST_CFA_OFFSET here
11: push %esp
+ CFI_ADJUST_CFA_OFFSET 4
call evtchn_do_upcall
add $4,%esp
+ CFI_ADJUST_CFA_OFFSET -4
jmp ret_from_intr
ALIGN
jnz 14f # process more events if necessary...
RESTORE_REGS
addl $4, %esp
+ CFI_ADJUST_CFA_OFFSET -4
1: iret
.section __ex_table,"a"
.align 4
movl %eax,(%edi)
loop 16b
17: movl %edi,%esp # final %edi is top of merged stack
+ # this popped off new frame to reuse the old one, therefore no
+ # CFI_DEF_CFA_OFFSET here
jmp 11b
+ CFI_ENDPROC
critical_fixup_table:
.byte 0xff,0xff,0xff # testb $0xff,(%esi) = __TEST_PENDING
# to pop the stack frame we end up in an infinite loop of failsafe callbacks.
# We distinguish between categories by maintaining a status value in EAX.
ENTRY(failsafe_callback)
+ RING0_INT_FRAME
pushl %eax
+ CFI_ADJUST_CFA_OFFSET 4
movl $1,%eax
1: mov 4(%esp),%ds
2: mov 8(%esp),%es
4: mov 16(%esp),%gs
testl %eax,%eax
popl %eax
+ CFI_ADJUST_CFA_OFFSET -4
jz 5f
addl $16,%esp # EAX != 0 => Category 2 (Bad IRET)
+ CFI_ADJUST_CFA_OFFSET -16
jmp iret_exc
+ CFI_ADJUST_CFA_OFFSET 16
5: addl $16,%esp # EAX == 0 => Category 1 (Bad segment)
+ CFI_ADJUST_CFA_OFFSET -16
pushl $0
+ CFI_ADJUST_CFA_OFFSET 4
SAVE_ALL
jmp ret_from_exception
.section .fixup,"ax"; \
.long 3b,8b; \
.long 4b,9b; \
.previous
+ CFI_ENDPROC
#endif
ENTRY(coprocessor_error)
+ RING0_INT_FRAME
pushl $0
+ CFI_ADJUST_CFA_OFFSET 4
pushl $do_coprocessor_error
+ CFI_ADJUST_CFA_OFFSET 4
jmp error_code
+ CFI_ENDPROC
ENTRY(simd_coprocessor_error)
+ RING0_INT_FRAME
pushl $0
+ CFI_ADJUST_CFA_OFFSET 4
pushl $do_simd_coprocessor_error
+ CFI_ADJUST_CFA_OFFSET 4
jmp error_code
+ CFI_ENDPROC
ENTRY(device_not_available)
+ RING0_INT_FRAME
pushl $-1 # mark this as an int
+ CFI_ADJUST_CFA_OFFSET 4
SAVE_ALL
#ifndef CONFIG_XEN
movl %cr0, %eax
testl $0x4, %eax # EM (math emulation bit)
je device_available_emulate
pushl $0 # temporary storage for ORIG_EIP
+ CFI_ADJUST_CFA_OFFSET 4
call math_emulate
addl $4, %esp
+ CFI_ADJUST_CFA_OFFSET -4
jmp ret_from_exception
device_available_emulate:
#endif
preempt_stop
call math_state_restore
jmp ret_from_exception
+ CFI_ENDPROC
#ifndef CONFIG_XEN
/*
#endif /* CONFIG_XEN */
KPROBE_ENTRY(debug)
+ RING0_INT_FRAME
#ifndef CONFIG_XEN
cmpl $sysenter_entry,(%esp)
jne debug_stack_correct
debug_stack_correct:
#endif /* !CONFIG_XEN */
pushl $-1 # mark this as an int
+ CFI_ADJUST_CFA_OFFSET 4
SAVE_ALL
xorl %edx,%edx # error code 0
movl %esp,%eax # pt_regs pointer
call do_debug
jmp ret_from_exception
+ CFI_ENDPROC
.previous .text
#ifndef CONFIG_XEN
* fault happened on the sysenter path.
*/
ENTRY(nmi)
+ RING0_INT_FRAME
pushl %eax
+ CFI_ADJUST_CFA_OFFSET 4
movl %ss, %eax
cmpw $__ESPFIX_SS, %ax
popl %eax
+ CFI_ADJUST_CFA_OFFSET -4
je nmi_16bit_stack
cmpl $sysenter_entry,(%esp)
je nmi_stack_fixup
pushl %eax
+ CFI_ADJUST_CFA_OFFSET 4
movl %esp,%eax
/* Do not access memory above the end of our stack page,
* it might not exist.
andl $(THREAD_SIZE-1),%eax
cmpl $(THREAD_SIZE-20),%eax
popl %eax
+ CFI_ADJUST_CFA_OFFSET -4
jae nmi_stack_correct
cmpl $sysenter_entry,12(%esp)
je nmi_debug_stack_check
nmi_stack_correct:
pushl %eax
+ CFI_ADJUST_CFA_OFFSET 4
SAVE_ALL
xorl %edx,%edx # zero error code
movl %esp,%eax # pt_regs pointer
call do_nmi
- jmp restore_all
+ jmp restore_nocheck_notrace
+ CFI_ENDPROC
nmi_stack_fixup:
FIX_STACK(12,nmi_stack_correct, 1)
jmp nmi_stack_correct
nmi_16bit_stack:
+ RING0_INT_FRAME
/* create the pointer to lss back */
pushl %ss
+ CFI_ADJUST_CFA_OFFSET 4
pushl %esp
+ CFI_ADJUST_CFA_OFFSET 4
movzwl %sp, %esp
addw $4, (%esp)
/* copy the iret frame of 12 bytes */
.rept 3
pushl 16(%esp)
+ CFI_ADJUST_CFA_OFFSET 4
.endr
pushl %eax
+ CFI_ADJUST_CFA_OFFSET 4
SAVE_ALL
FIXUP_ESPFIX_STACK # %eax == %esp
+ CFI_ADJUST_CFA_OFFSET -20 # the frame has now moved
xorl %edx,%edx # zero error code
call do_nmi
RESTORE_REGS
lss 12+4(%esp), %esp # back to 16bit stack
1: iret
+ CFI_ENDPROC
.section __ex_table,"a"
.align 4
.long 1b,iret_exc
.previous
#else
ENTRY(nmi)
+ RING0_INT_FRAME
pushl %eax
+ CFI_ADJUST_CFA_OFFSET 4
SAVE_ALL
xorl %edx,%edx # zero error code
movl %esp,%eax # pt_regs pointer
call do_nmi
orl $NMI_MASK, EFLAGS(%esp)
jmp restore_all
+ CFI_ENDPROC
#endif
KPROBE_ENTRY(int3)
+ RING0_INT_FRAME
pushl $-1 # mark this as an int
+ CFI_ADJUST_CFA_OFFSET 4
SAVE_ALL
xorl %edx,%edx # zero error code
movl %esp,%eax # pt_regs pointer
call do_int3
jmp ret_from_exception
+ CFI_ENDPROC
.previous .text
ENTRY(overflow)
+ RING0_INT_FRAME
pushl $0
+ CFI_ADJUST_CFA_OFFSET 4
pushl $do_overflow
+ CFI_ADJUST_CFA_OFFSET 4
jmp error_code
+ CFI_ENDPROC
ENTRY(bounds)
+ RING0_INT_FRAME
pushl $0
+ CFI_ADJUST_CFA_OFFSET 4
pushl $do_bounds
+ CFI_ADJUST_CFA_OFFSET 4
jmp error_code
+ CFI_ENDPROC
ENTRY(invalid_op)
+ RING0_INT_FRAME
pushl $0
+ CFI_ADJUST_CFA_OFFSET 4
pushl $do_invalid_op
+ CFI_ADJUST_CFA_OFFSET 4
jmp error_code
+ CFI_ENDPROC
ENTRY(coprocessor_segment_overrun)
+ RING0_INT_FRAME
pushl $0
+ CFI_ADJUST_CFA_OFFSET 4
pushl $do_coprocessor_segment_overrun
+ CFI_ADJUST_CFA_OFFSET 4
jmp error_code
+ CFI_ENDPROC
ENTRY(invalid_TSS)
+ RING0_EC_FRAME
pushl $do_invalid_TSS
+ CFI_ADJUST_CFA_OFFSET 4
jmp error_code
+ CFI_ENDPROC
ENTRY(segment_not_present)
+ RING0_EC_FRAME
pushl $do_segment_not_present
+ CFI_ADJUST_CFA_OFFSET 4
jmp error_code
+ CFI_ENDPROC
ENTRY(stack_segment)
+ RING0_EC_FRAME
pushl $do_stack_segment
+ CFI_ADJUST_CFA_OFFSET 4
jmp error_code
+ CFI_ENDPROC
KPROBE_ENTRY(general_protection)
+ RING0_EC_FRAME
pushl $do_general_protection
+ CFI_ADJUST_CFA_OFFSET 4
jmp error_code
+ CFI_ENDPROC
.previous .text
ENTRY(alignment_check)
+ RING0_EC_FRAME
pushl $do_alignment_check
+ CFI_ADJUST_CFA_OFFSET 4
jmp error_code
+ CFI_ENDPROC
KPROBE_ENTRY(page_fault)
+ RING0_EC_FRAME
pushl $do_page_fault
+ CFI_ADJUST_CFA_OFFSET 4
jmp error_code
+ CFI_ENDPROC
.previous .text
#ifdef CONFIG_X86_MCE
ENTRY(machine_check)
+ RING0_INT_FRAME
pushl $0
+ CFI_ADJUST_CFA_OFFSET 4
pushl machine_check_vector
+ CFI_ADJUST_CFA_OFFSET 4
jmp error_code
+ CFI_ENDPROC
#endif
ENTRY(fixup_4gb_segment)
+ RING0_INT_FRAME
pushl $do_fixup_4gb_segment
+ CFI_ADJUST_CFA_OFFSET 4
jmp error_code
+ CFI_ENDPROC
+
+#ifdef CONFIG_STACK_UNWIND
+ENTRY(arch_unwind_init_running)
+ CFI_STARTPROC
+ movl 4(%esp), %edx
+ movl (%esp), %ecx
+ leal 4(%esp), %eax
+ movl %ebx, EBX(%edx)
+ xorl %ebx, %ebx
+ movl %ebx, ECX(%edx)
+ movl %ebx, EDX(%edx)
+ movl %esi, ESI(%edx)
+ movl %edi, EDI(%edx)
+ movl %ebp, EBP(%edx)
+ movl %ebx, EAX(%edx)
+ movl $__USER_DS, DS(%edx)
+ movl $__USER_DS, ES(%edx)
+ movl %ebx, ORIG_EAX(%edx)
+ movl %ecx, EIP(%edx)
+ movl 12(%esp), %ecx
+ movl $__KERNEL_CS, CS(%edx)
+ movl %ebx, EFLAGS(%edx)
+ movl %eax, OLDESP(%edx)
+ movl 8(%esp), %eax
+ movl %ecx, 8(%esp)
+ movl EBX(%edx), %ebx
+ movl $__KERNEL_DS, OLDSS(%edx)
+ jmpl *%eax
+ CFI_ENDPROC
+ENDPROC(arch_unwind_init_running)
+#endif
.section .rodata,"a"
#include "syscall_table.S"
git://git.onelab.eu / linux-2.6.git / blobdiff