* 18(%esp) - %eax
* 1C(%esp) - %ds
* 20(%esp) - %es
- * 24(%esp) - orig_eax
- * 28(%esp) - %eip
- * 2C(%esp) - %cs
- * 30(%esp) - %eflags
- * 34(%esp) - %oldesp
- * 38(%esp) - %oldss
+ * 24(%esp) - %gs
+ * 28(%esp) - orig_eax
+ * 2C(%esp) - %eip
+ * 30(%esp) - %cs
+ * 34(%esp) - %eflags
+ * 38(%esp) - %oldesp
+ * 3C(%esp) - %oldss
*
* "current" is in register %ebx during any slow entries.
*/
#include <asm/smp.h>
#include <asm/page.h>
#include <asm/desc.h>
+#include <asm/percpu.h>
#include <asm/dwarf2.h>
#include "irq_vectors.h"
#include <xen/interface/xen.h>
-#define nr_syscalls ((syscall_table_size)/4)
+/*
+ * We use macros for low-level operations which need to be overridden
+ * for paravirtualization. The following will never clobber any registers:
+ * INTERRUPT_RETURN (aka. "iret")
+ * GET_CR0_INTO_EAX (aka. "movl %cr0, %eax")
+ * ENABLE_INTERRUPTS_SYSEXIT (aka "sti; sysexit").
+ *
+ * For DISABLE_INTERRUPTS/ENABLE_INTERRUPTS (aka "cli"/"sti"), you must
+ * specify what registers can be overwritten (CLBR_NONE, CLBR_EAX/EDX/ECX/ANY).
+ * Allowing a register to be clobbered can shrink the paravirt replacement
+ * enough to patch inline, increasing performance.
+ */
-EBX = 0x00
-ECX = 0x04
-EDX = 0x08
-ESI = 0x0C
-EDI = 0x10
-EBP = 0x14
-EAX = 0x18
-DS = 0x1C
-ES = 0x20
-ORIG_EAX = 0x24
-EIP = 0x28
-CS = 0x2C
-EFLAGS = 0x30
-OLDESP = 0x34
-OLDSS = 0x38
+#define nr_syscalls ((syscall_table_size)/4)
CF_MASK = 0x00000001
TF_MASK = 0x00000100
/* Pseudo-eflags. */
NMI_MASK = 0x80000000
-#ifndef CONFIG_XEN
-#define DISABLE_INTERRUPTS cli
-#define ENABLE_INTERRUPTS sti
-#else
+#ifdef CONFIG_XEN
/* Offsets into shared_info_t. */
#define evtchn_upcall_pending /* 0 */
#define evtchn_upcall_mask 1
#define sizeof_vcpu_shift 6
#ifdef CONFIG_SMP
-#define GET_VCPU_INFO movl TI_cpu(%ebp),%esi ; \
+#define GET_VCPU_INFO movl %gs:PDA_cpu,%esi ; \
shl $sizeof_vcpu_shift,%esi ; \
addl HYPERVISOR_shared_info,%esi
#else
#define __DISABLE_INTERRUPTS movb $1,evtchn_upcall_mask(%esi)
#define __ENABLE_INTERRUPTS movb $0,evtchn_upcall_mask(%esi)
-#define DISABLE_INTERRUPTS GET_VCPU_INFO ; \
- __DISABLE_INTERRUPTS
-#define ENABLE_INTERRUPTS GET_VCPU_INFO ; \
- __ENABLE_INTERRUPTS
#define __TEST_PENDING testb $0xFF,evtchn_upcall_pending(%esi)
#endif
#ifdef CONFIG_PREEMPT
-#define preempt_stop cli; TRACE_IRQS_OFF
+#define preempt_stop(clobbers) DISABLE_INTERRUPTS(clobbers); TRACE_IRQS_OFF
#else
-#define preempt_stop
+#define preempt_stop(clobbers)
#define resume_kernel restore_nocheck
#endif
.macro TRACE_IRQS_IRET
#ifdef CONFIG_TRACE_IRQFLAGS
- testl $IF_MASK,EFLAGS(%esp) # interrupts off?
+ testl $IF_MASK,PT_EFLAGS(%esp) # interrupts off?
jz 1f
TRACE_IRQS_ON
1:
#define SAVE_ALL \
cld; \
+ pushl %gs; \
+ CFI_ADJUST_CFA_OFFSET 4;\
+ /*CFI_REL_OFFSET gs, 0;*/\
pushl %es; \
CFI_ADJUST_CFA_OFFSET 4;\
/*CFI_REL_OFFSET es, 0;*/\
CFI_REL_OFFSET ebx, 0;\
movl $(__USER_DS), %edx; \
movl %edx, %ds; \
- movl %edx, %es;
+ movl %edx, %es; \
+ movl $(__KERNEL_PDA), %edx; \
+ movl %edx, %gs
#define RESTORE_INT_REGS \
popl %ebx; \
2: popl %es; \
CFI_ADJUST_CFA_OFFSET -4;\
/*CFI_RESTORE es;*/\
-.section .fixup,"ax"; \
-3: movl $0,(%esp); \
- jmp 1b; \
+3: popl %gs; \
+ CFI_ADJUST_CFA_OFFSET -4;\
+ /*CFI_RESTORE gs;*/\
+.pushsection .fixup,"ax"; \
4: movl $0,(%esp); \
+ jmp 1b; \
+5: movl $0,(%esp); \
jmp 2b; \
-.previous; \
+6: movl $0,(%esp); \
+ jmp 3b; \
.section __ex_table,"a";\
.align 4; \
- .long 1b,3b; \
- .long 2b,4b; \
-.previous
+ .long 1b,4b; \
+ .long 2b,5b; \
+ .long 3b,6b; \
+.popsection
#define RING0_INT_FRAME \
CFI_STARTPROC simple;\
+ CFI_SIGNAL_FRAME;\
CFI_DEF_CFA esp, 3*4;\
/*CFI_OFFSET cs, -2*4;*/\
CFI_OFFSET eip, -3*4
#define RING0_EC_FRAME \
CFI_STARTPROC simple;\
+ CFI_SIGNAL_FRAME;\
CFI_DEF_CFA esp, 4*4;\
/*CFI_OFFSET cs, -2*4;*/\
CFI_OFFSET eip, -3*4
#define RING0_PTREGS_FRAME \
CFI_STARTPROC simple;\
- CFI_DEF_CFA esp, OLDESP-EBX;\
- /*CFI_OFFSET cs, CS-OLDESP;*/\
- CFI_OFFSET eip, EIP-OLDESP;\
- /*CFI_OFFSET es, ES-OLDESP;*/\
- /*CFI_OFFSET ds, DS-OLDESP;*/\
- CFI_OFFSET eax, EAX-OLDESP;\
- CFI_OFFSET ebp, EBP-OLDESP;\
- CFI_OFFSET edi, EDI-OLDESP;\
- CFI_OFFSET esi, ESI-OLDESP;\
- CFI_OFFSET edx, EDX-OLDESP;\
- CFI_OFFSET ecx, ECX-OLDESP;\
- CFI_OFFSET ebx, EBX-OLDESP
+ CFI_SIGNAL_FRAME;\
+ CFI_DEF_CFA esp, PT_OLDESP-PT_EBX;\
+ /*CFI_OFFSET cs, PT_CS-PT_OLDESP;*/\
+ CFI_OFFSET eip, PT_EIP-PT_OLDESP;\
+ /*CFI_OFFSET es, PT_ES-PT_OLDESP;*/\
+ /*CFI_OFFSET ds, PT_DS-PT_OLDESP;*/\
+ CFI_OFFSET eax, PT_EAX-PT_OLDESP;\
+ CFI_OFFSET ebp, PT_EBP-PT_OLDESP;\
+ CFI_OFFSET edi, PT_EDI-PT_OLDESP;\
+ CFI_OFFSET esi, PT_ESI-PT_OLDESP;\
+ CFI_OFFSET edx, PT_EDX-PT_OLDESP;\
+ CFI_OFFSET ecx, PT_ECX-PT_OLDESP;\
+ CFI_OFFSET ebx, PT_EBX-PT_OLDESP
ENTRY(ret_from_fork)
CFI_STARTPROC
ALIGN
RING0_PTREGS_FRAME
ret_from_exception:
- preempt_stop
+ preempt_stop(CLBR_ANY)
ret_from_intr:
GET_THREAD_INFO(%ebp)
check_userspace:
- movl EFLAGS(%esp), %eax # mix EFLAGS and CS
- movb CS(%esp), %al
- testl $(VM_MASK | 2), %eax
- jz resume_kernel
+ movl PT_EFLAGS(%esp), %eax # mix EFLAGS and CS
+ movb PT_CS(%esp), %al
+ andl $(VM_MASK | SEGMENT_RPL_MASK), %eax
+ cmpl $USER_RPL, %eax
+ jb resume_kernel # not returning to v8086 or userspace
+
ENTRY(resume_userspace)
- DISABLE_INTERRUPTS # make sure we don't miss an interrupt
+ DISABLE_INTERRUPTS(CLBR_ANY) # make sure we don't miss an interrupt
# setting need_resched or sigpending
# between sampling and the iret
movl TI_flags(%ebp), %ecx
#ifdef CONFIG_PREEMPT
ENTRY(resume_kernel)
- cli
+ DISABLE_INTERRUPTS(CLBR_ANY)
cmpl $0,TI_preempt_count(%ebp) # non-zero preempt_count ?
jnz restore_nocheck
need_resched:
movl TI_flags(%ebp), %ecx # need_resched set ?
testb $_TIF_NEED_RESCHED, %cl
jz restore_all
- testl $IF_MASK,EFLAGS(%esp) # interrupts off (exception path) ?
+ testl $IF_MASK,PT_EFLAGS(%esp) # interrupts off (exception path) ?
jz restore_all
call preempt_schedule_irq
jmp need_resched
# sysenter call handler stub
ENTRY(sysenter_entry)
CFI_STARTPROC simple
+ CFI_SIGNAL_FRAME
CFI_DEF_CFA esp, 0
CFI_REGISTER esp, ebp
movl SYSENTER_stack_esp0(%esp),%esp
* No need to follow this irqs on/off section: the syscall
* disabled irqs and here we enable it straight after entry:
*/
- sti
+ ENABLE_INTERRUPTS(CLBR_NONE)
pushl $(__USER_DS)
CFI_ADJUST_CFA_OFFSET 4
/*CFI_REL_OFFSET ss, 0*/
pushl $(__USER_CS)
CFI_ADJUST_CFA_OFFSET 4
/*CFI_REL_OFFSET cs, 0*/
+#ifndef CONFIG_COMPAT_VDSO
/*
* Push current_thread_info()->sysenter_return to the stack.
* A tiny bit of offset fixup is necessary - 4*4 means the 4 words
* pushed above; +8 corresponds to copy_thread's esp0 setting.
*/
pushl (TI_sysenter_return-THREAD_SIZE+8+4*4)(%esp)
+#else
+ pushl $SYSENTER_RETURN
+#endif
CFI_ADJUST_CFA_OFFSET 4
CFI_REL_OFFSET eip, 0
GET_THREAD_INFO(%ebp)
/* Note, _TIF_SECCOMP is bit number 8, and so it needs testw and not testb */
- testw $(_TIF_SYSCALL_EMU|_TIF_SYSCALL_TRACE|_TIF_SECCOMP|_TIF_SYSCALL_AUDIT),TI_flags(%ebp)
+ testw $(_TIF_SYSCALL_TRACE|_TIF_SECCOMP|_TIF_SYSCALL_AUDIT),TI_flags(%ebp)
jnz syscall_trace_entry
cmpl $(nr_syscalls), %eax
jae syscall_badsys
call *sys_call_table(,%eax,4)
- movl %eax,EAX(%esp)
- DISABLE_INTERRUPTS
+ movl %eax,PT_EAX(%esp)
+ DISABLE_INTERRUPTS(CLBR_ECX|CLBR_EDX)
TRACE_IRQS_OFF
movl TI_flags(%ebp), %ecx
testw $_TIF_ALLWORK_MASK, %cx
jne syscall_exit_work
/* if something modifies registers it must also disable sysexit */
- movl EIP(%esp), %edx
- movl OLDESP(%esp), %ecx
+ movl PT_EIP(%esp), %edx
+ movl PT_OLDESP(%esp), %ecx
xorl %ebp,%ebp
TRACE_IRQS_ON
+1: mov PT_GS(%esp), %gs
#ifdef CONFIG_XEN
__ENABLE_INTERRUPTS
sysexit_scrit: /**** START OF SYSEXIT CRITICAL REGION ****/
__TEST_PENDING
jnz 14f # process more events if necessary...
- movl ESI(%esp), %esi
+ movl PT_ESI(%esp), %esi
sysexit
14: __DISABLE_INTERRUPTS
sysexit_ecrit: /**** END OF SYSEXIT CRITICAL REGION ****/
CFI_ADJUST_CFA_OFFSET -4
jmp ret_from_intr
#else
- sti
- sysexit
+ ENABLE_INTERRUPTS_SYSEXIT
#endif /* !CONFIG_XEN */
CFI_ENDPROC
-
+.pushsection .fixup,"ax"
+2: movl $0,PT_GS(%esp)
+ jmp 1b
+.section __ex_table,"a"
+ .align 4
+ .long 1b,2b
+.popsection
# system call handler stub
ENTRY(system_call)
CFI_ADJUST_CFA_OFFSET 4
SAVE_ALL
GET_THREAD_INFO(%ebp)
- testl $TF_MASK,EFLAGS(%esp)
+ testl $TF_MASK,PT_EFLAGS(%esp)
jz no_singlestep
orl $_TIF_SINGLESTEP,TI_flags(%ebp)
no_singlestep:
# system call tracing in operation / emulation
/* Note, _TIF_SECCOMP is bit number 8, and so it needs testw and not testb */
- testw $(_TIF_SYSCALL_EMU|_TIF_SYSCALL_TRACE|_TIF_SECCOMP|_TIF_SYSCALL_AUDIT),TI_flags(%ebp)
+ testw $(_TIF_SYSCALL_TRACE|_TIF_SECCOMP|_TIF_SYSCALL_AUDIT),TI_flags(%ebp)
jnz syscall_trace_entry
cmpl $(nr_syscalls), %eax
jae syscall_badsys
syscall_call:
call *sys_call_table(,%eax,4)
- movl %eax,EAX(%esp) # store the return value
+ movl %eax,PT_EAX(%esp) # store the return value
syscall_exit:
- DISABLE_INTERRUPTS # make sure we don't miss an interrupt
+ DISABLE_INTERRUPTS(CLBR_ANY) # make sure we don't miss an interrupt
# setting need_resched or sigpending
# between sampling and the iret
TRACE_IRQS_OFF
restore_all:
#ifndef CONFIG_XEN
- movl EFLAGS(%esp), %eax # mix EFLAGS, SS and CS
- # Warning: OLDSS(%esp) contains the wrong/random values if we
+ movl PT_EFLAGS(%esp), %eax # mix EFLAGS, SS and CS
+ # Warning: PT_OLDSS(%esp) contains the wrong/random values if we
# are returning to the kernel.
# See comments in process.c:copy_thread() for details.
- movb OLDSS(%esp), %ah
- movb CS(%esp), %al
- andl $(VM_MASK | (4 << 8) | 3), %eax
- cmpl $((4 << 8) | 3), %eax
+ movb PT_OLDSS(%esp), %ah
+ movb PT_CS(%esp), %al
+ andl $(VM_MASK | (SEGMENT_TI_MASK << 8) | SEGMENT_RPL_MASK), %eax
+ cmpl $((SEGMENT_LDT << 8) | USER_RPL), %eax
+ CFI_REMEMBER_STATE
je ldt_ss # returning to user-space with LDT SS
restore_nocheck:
#else
restore_nocheck:
- movl EFLAGS(%esp), %eax
+ movl PT_EFLAGS(%esp), %eax
testl $(VM_MASK|NMI_MASK), %eax
jnz hypervisor_iret
shr $9, %eax # EAX[0] == IRET_EFLAGS.IF
andb evtchn_upcall_mask(%esi),%al
andb $1,%al # EAX[0] == IRET_EFLAGS.IF & event_mask
jnz restore_all_enable_events # != 0 => enable event delivery
+ CFI_REMEMBER_STATE
#endif
TRACE_IRQS_IRET
- CFI_REMEMBER_STATE
restore_nocheck_notrace:
RESTORE_REGS
- addl $4, %esp
+ addl $4, %esp # skip orig_eax/error_code
CFI_ADJUST_CFA_OFFSET -4
-1: iret
+1: INTERRUPT_RETURN
.section .fixup,"ax"
iret_exc:
#ifndef CONFIG_XEN
TRACE_IRQS_ON
- sti
+ ENABLE_INTERRUPTS(CLBR_NONE)
#endif
pushl $0 # no error code
pushl $do_iret_error
CFI_RESTORE_STATE
#ifndef CONFIG_XEN
ldt_ss:
- larl OLDSS(%esp), %eax
+ larl PT_OLDSS(%esp), %eax
jnz restore_nocheck
testl $0x00400000, %eax # returning to 32bit stack?
jnz restore_nocheck # allright, normal return
+
+#ifdef CONFIG_PARAVIRT
+ /*
+ * The kernel can't run on a non-flat stack if paravirt mode
+ * is active. Rather than try to fixup the high bits of
+ * ESP, bypass this code entirely. This may break DOSemu
+ * and/or Wine support in a paravirt VM, although the option
+ * is still available to implement the setting of the high
+ * 16-bits in the INTERRUPT_RETURN paravirt-op.
+ */
+ cmpl $0, paravirt_ops+PARAVIRT_enabled
+ jne restore_nocheck
+#endif
+
/* If returning to userspace with 16bit stack,
* try to fix the higher word of ESP, as the CPU
* won't restore it.
* This is an "official" bug of all the x86-compatible
* CPUs, which we can try to work around to make
* dosemu and wine happy. */
- subl $8, %esp # reserve space for switch16 pointer
- CFI_ADJUST_CFA_OFFSET 8
- cli
+ movl PT_OLDESP(%esp), %eax
+ movl %esp, %edx
+ call patch_espfix_desc
+ pushl $__ESPFIX_SS
+ CFI_ADJUST_CFA_OFFSET 4
+ pushl %eax
+ CFI_ADJUST_CFA_OFFSET 4
+ DISABLE_INTERRUPTS(CLBR_EAX)
TRACE_IRQS_OFF
- movl %esp, %eax
- /* Set up the 16bit stack frame with switch32 pointer on top,
- * and a switch16 pointer on top of the current frame. */
- call setup_x86_bogus_stack
- CFI_ADJUST_CFA_OFFSET -8 # frame has moved
- TRACE_IRQS_IRET
- RESTORE_REGS
- lss 20+4(%esp), %esp # switch to 16bit stack
-1: iret
-.section __ex_table,"a"
- .align 4
- .long 1b,iret_exc
-.previous
+ lss (%esp), %esp
+ CFI_ADJUST_CFA_OFFSET -8
+ jmp restore_nocheck
#else
hypervisor_iret:
- andl $~NMI_MASK, EFLAGS(%esp)
+ andl $~NMI_MASK, PT_EFLAGS(%esp)
RESTORE_REGS
addl $4, %esp
jmp hypercall_page + (__HYPERVISOR_iret * 32)
jz work_notifysig
work_resched:
call schedule
- DISABLE_INTERRUPTS # make sure we don't miss an interrupt
+ DISABLE_INTERRUPTS(CLBR_ANY) # make sure we don't miss an interrupt
# setting need_resched or sigpending
# between sampling and the iret
TRACE_IRQS_OFF
work_notifysig: # deal with pending signals and
# notify-resume requests
- testl $VM_MASK, EFLAGS(%esp)
+#ifdef CONFIG_VM86
+ testl $VM_MASK, PT_EFLAGS(%esp)
movl %esp, %eax
jne work_notifysig_v86 # returning to kernel-space or
# vm86-space
ALIGN
work_notifysig_v86:
-#ifdef CONFIG_VM86
pushl %ecx # save ti_flags for do_notify_resume
CFI_ADJUST_CFA_OFFSET 4
call save_v86_state # %eax contains pt_regs pointer
popl %ecx
CFI_ADJUST_CFA_OFFSET -4
movl %eax, %esp
+#else
+ movl %esp, %eax
+#endif
xorl %edx, %edx
call do_notify_resume
jmp resume_userspace_sig
-#endif
# perform syscall exit tracing
ALIGN
syscall_trace_entry:
- movl $-ENOSYS,EAX(%esp)
+ movl $-ENOSYS,PT_EAX(%esp)
movl %esp, %eax
xorl %edx,%edx
call do_syscall_trace
- cmpl $0, %eax
- jne resume_userspace # ret != 0 -> running under PTRACE_SYSEMU,
- # so must skip actual syscall
- movl ORIG_EAX(%esp), %eax
+ movl PT_ORIG_EAX(%esp), %eax
cmpl $(nr_syscalls), %eax
jnae syscall_call
jmp syscall_exit
testb $(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT|_TIF_SINGLESTEP), %cl
jz work_pending
TRACE_IRQS_ON
- ENABLE_INTERRUPTS # could let do_syscall_trace() call
+ ENABLE_INTERRUPTS(CLBR_ANY) # could let do_syscall_trace() call
# schedule() instead
movl %esp, %eax
movl $1, %edx
CFI_ADJUST_CFA_OFFSET 4
SAVE_ALL
GET_THREAD_INFO(%ebp)
- movl $-EFAULT,EAX(%esp)
+ movl $-EFAULT,PT_EAX(%esp)
jmp resume_userspace
syscall_badsys:
- movl $-ENOSYS,EAX(%esp)
+ movl $-ENOSYS,PT_EAX(%esp)
jmp resume_userspace
CFI_ENDPROC
#ifndef CONFIG_XEN
#define FIXUP_ESPFIX_STACK \
- movl %esp, %eax; \
- /* switch to 32bit stack using the pointer on top of 16bit stack */ \
- lss %ss:CPU_16BIT_STACK_SIZE-8, %esp; \
- /* copy data from 16bit stack to 32bit stack */ \
- call fixup_x86_bogus_stack; \
- /* put ESP to the proper location */ \
- movl %eax, %esp;
-#define UNWIND_ESPFIX_STACK \
+ /* since we are on a wrong stack, we cant make it a C code :( */ \
+ movl %gs:PDA_cpu, %ebx; \
+ PER_CPU(cpu_gdt_descr, %ebx); \
+ movl GDS_address(%ebx), %ebx; \
+ GET_DESC_BASE(GDT_ENTRY_ESPFIX_SS, %ebx, %eax, %ax, %al, %ah); \
+ addl %esp, %eax; \
+ pushl $__KERNEL_DS; \
+ CFI_ADJUST_CFA_OFFSET 4; \
pushl %eax; \
CFI_ADJUST_CFA_OFFSET 4; \
+ lss (%esp), %esp; \
+ CFI_ADJUST_CFA_OFFSET -8;
+#define UNWIND_ESPFIX_STACK \
movl %ss, %eax; \
- /* see if on 16bit stack */ \
+ /* see if on espfix stack */ \
cmpw $__ESPFIX_SS, %ax; \
- je 28f; \
-27: popl %eax; \
- CFI_ADJUST_CFA_OFFSET -4; \
-.section .fixup,"ax"; \
-28: movl $__KERNEL_DS, %eax; \
+ jne 27f; \
+ movl $__KERNEL_DS, %eax; \
movl %eax, %ds; \
movl %eax, %es; \
- /* switch to 32bit stack */ \
+ /* switch to normal stack */ \
FIXUP_ESPFIX_STACK; \
- jmp 27b; \
-.previous
+27:;
/*
* Build the entry stubs and pointer table with
#define BUILD_INTERRUPT(name, nr) \
ENTRY(name) \
- SAVE_ALL \
RING0_INT_FRAME; \
pushl $~(nr); \
CFI_ADJUST_CFA_OFFSET 4; \
#define UNWIND_ESPFIX_STACK
#endif
-ENTRY(divide_error)
- RING0_INT_FRAME
- pushl $0 # no error code
- CFI_ADJUST_CFA_OFFSET 4
- pushl $do_divide_error
+KPROBE_ENTRY(page_fault)
+ RING0_EC_FRAME
+ pushl $do_page_fault
CFI_ADJUST_CFA_OFFSET 4
ALIGN
error_code:
+ /* the function address is in %gs's slot on the stack */
+ pushl %es
+ CFI_ADJUST_CFA_OFFSET 4
+ /*CFI_REL_OFFSET es, 0*/
pushl %ds
CFI_ADJUST_CFA_OFFSET 4
/*CFI_REL_OFFSET ds, 0*/
pushl %eax
CFI_ADJUST_CFA_OFFSET 4
CFI_REL_OFFSET eax, 0
- xorl %eax, %eax
pushl %ebp
CFI_ADJUST_CFA_OFFSET 4
CFI_REL_OFFSET ebp, 0
pushl %edx
CFI_ADJUST_CFA_OFFSET 4
CFI_REL_OFFSET edx, 0
- decl %eax # eax = -1
pushl %ecx
CFI_ADJUST_CFA_OFFSET 4
CFI_REL_OFFSET ecx, 0
CFI_ADJUST_CFA_OFFSET 4
CFI_REL_OFFSET ebx, 0
cld
- pushl %es
+ pushl %gs
CFI_ADJUST_CFA_OFFSET 4
- /*CFI_REL_OFFSET es, 0*/
+ /*CFI_REL_OFFSET gs, 0*/
+ movl $(__KERNEL_PDA), %ecx
+ movl %ecx, %gs
UNWIND_ESPFIX_STACK
popl %ecx
CFI_ADJUST_CFA_OFFSET -4
/*CFI_REGISTER es, ecx*/
- movl ES(%esp), %edi # get the function address
- movl ORIG_EAX(%esp), %edx # get the error code
- movl %eax, ORIG_EAX(%esp)
- movl %ecx, ES(%esp)
- /*CFI_REL_OFFSET es, ES*/
+ movl PT_GS(%esp), %edi # get the function address
+ movl PT_ORIG_EAX(%esp), %edx # get the error code
+ movl $-1, PT_ORIG_EAX(%esp) # no syscall to restart
+ mov %ecx, PT_GS(%esp)
+ /*CFI_REL_OFFSET gs, ES*/
movl $(__USER_DS), %ecx
movl %ecx, %ds
movl %ecx, %es
call *%edi
jmp ret_from_exception
CFI_ENDPROC
+KPROBE_END(page_fault)
#ifdef CONFIG_XEN
# A note on the "critical region" in our callback handler.
pushl %eax
CFI_ADJUST_CFA_OFFSET 4
SAVE_ALL
- movl EIP(%esp),%eax
+ movl PT_EIP(%esp),%eax
cmpl $scrit,%eax
jb 11f
cmpl $ecrit,%eax
cmpl $sysexit_ecrit,%eax
ja 11f
# interrupted in sysexit critical
- addl $0x34,%esp # Remove cs...ebx from stack frame.
+ addl $0x38,%esp # Remove cs...ebx from stack frame.
# this popped off new frame to reuse the old one, therefore no
# CFI_ADJUST_CFA_OFFSET here
11: push %esp
15: mov %esp,%esi
add %eax,%esi # %esi points at end of src region
mov %esp,%edi
- add $0x34,%edi # %edi points at end of dst region
+ add $0x38,%edi # %edi points at end of dst region
mov %eax,%ecx
shr $2,%ecx # convert words to bytes
je 17f # skip loop if nothing to copy
.byte 0x18 # pop %eax
.byte 0x1c # pop %ds
.byte 0x20 # pop %es
- .byte 0x24,0x24,0x24 # add $4,%esp
- .byte 0x28 # iret
+ .byte 0x24 # pop %gs
+ .byte 0x28,0x28,0x28 # add $4,%esp
+ .byte 0x2c # iret
.byte 0xff,0xff,0xff,0xff # movb $1,1(%esi)
.byte 0x00,0x00 # jmp 11b
CFI_ADJUST_CFA_OFFSET 4
SAVE_ALL
#ifndef CONFIG_XEN
- movl %cr0, %eax
+ GET_CR0_INTO_EAX
testl $0x4, %eax # EM (math emulation bit)
je device_available_emulate
pushl $0 # temporary storage for ORIG_EIP
jmp ret_from_exception
device_available_emulate:
#endif
- preempt_stop
+ preempt_stop(CLBR_ANY)
call math_state_restore
jmp ret_from_exception
CFI_ENDPROC
jne ok; \
label: \
movl SYSENTER_stack_esp0+offset(%esp),%esp; \
+ CFI_DEF_CFA esp, 0; \
+ CFI_UNDEFINED eip; \
pushfl; \
+ CFI_ADJUST_CFA_OFFSET 4; \
pushl $__KERNEL_CS; \
- pushl $sysenter_past_esp
+ CFI_ADJUST_CFA_OFFSET 4; \
+ pushl $sysenter_past_esp; \
+ CFI_ADJUST_CFA_OFFSET 4; \
+ CFI_REL_OFFSET eip, 0
#endif /* CONFIG_XEN */
KPROBE_ENTRY(debug)
call do_debug
jmp ret_from_exception
CFI_ENDPROC
- .previous .text
+KPROBE_END(debug)
#ifndef CONFIG_XEN
/*
* check whether we got an NMI on the debug path where the debug
* fault happened on the sysenter path.
*/
-ENTRY(nmi)
+KPROBE_ENTRY(nmi)
RING0_INT_FRAME
pushl %eax
CFI_ADJUST_CFA_OFFSET 4
cmpw $__ESPFIX_SS, %ax
popl %eax
CFI_ADJUST_CFA_OFFSET -4
- je nmi_16bit_stack
+ je nmi_espfix_stack
cmpl $sysenter_entry,(%esp)
je nmi_stack_fixup
pushl %eax
cmpl $sysenter_entry,12(%esp)
je nmi_debug_stack_check
nmi_stack_correct:
+ /* We have a RING0_INT_FRAME here */
pushl %eax
CFI_ADJUST_CFA_OFFSET 4
SAVE_ALL
CFI_ENDPROC
nmi_stack_fixup:
+ RING0_INT_FRAME
FIX_STACK(12,nmi_stack_correct, 1)
jmp nmi_stack_correct
+
nmi_debug_stack_check:
+ /* We have a RING0_INT_FRAME here */
cmpw $__KERNEL_CS,16(%esp)
jne nmi_stack_correct
cmpl $debug,(%esp)
FIX_STACK(24,nmi_stack_correct, 1)
jmp nmi_stack_correct
-nmi_16bit_stack:
- RING0_INT_FRAME
- /* create the pointer to lss back */
+nmi_espfix_stack:
+ /* We have a RING0_INT_FRAME here.
+ *
+ * create the pointer to lss back
+ */
pushl %ss
CFI_ADJUST_CFA_OFFSET 4
pushl %esp
CFI_ADJUST_CFA_OFFSET 4
- movzwl %sp, %esp
addw $4, (%esp)
/* copy the iret frame of 12 bytes */
.rept 3
CFI_ADJUST_CFA_OFFSET 4
SAVE_ALL
FIXUP_ESPFIX_STACK # %eax == %esp
- CFI_ADJUST_CFA_OFFSET -20 # the frame has now moved
xorl %edx,%edx # zero error code
call do_nmi
RESTORE_REGS
- lss 12+4(%esp), %esp # back to 16bit stack
-1: iret
+ lss 12+4(%esp), %esp # back to espfix stack
+ CFI_ADJUST_CFA_OFFSET -24
+1: INTERRUPT_RETURN
CFI_ENDPROC
.section __ex_table,"a"
.align 4
.long 1b,iret_exc
.previous
+KPROBE_END(nmi)
#else
-ENTRY(nmi)
+KPROBE_ENTRY(nmi)
RING0_INT_FRAME
pushl %eax
CFI_ADJUST_CFA_OFFSET 4
xorl %edx,%edx # zero error code
movl %esp,%eax # pt_regs pointer
call do_nmi
- orl $NMI_MASK, EFLAGS(%esp)
+ orl $NMI_MASK, PT_EFLAGS(%esp)
jmp restore_all
CFI_ENDPROC
+KPROBE_END(nmi)
+#endif
+
+#ifdef CONFIG_PARAVIRT
+ENTRY(native_iret)
+1: iret
+.section __ex_table,"a"
+ .align 4
+ .long 1b,iret_exc
+.previous
+
+ENTRY(native_irq_enable_sysexit)
+ sti
+ sysexit
#endif
KPROBE_ENTRY(int3)
call do_int3
jmp ret_from_exception
CFI_ENDPROC
- .previous .text
+KPROBE_END(int3)
ENTRY(overflow)
RING0_INT_FRAME
CFI_ADJUST_CFA_OFFSET 4
jmp error_code
CFI_ENDPROC
- .previous .text
+KPROBE_END(general_protection)
ENTRY(alignment_check)
RING0_EC_FRAME
jmp error_code
CFI_ENDPROC
-KPROBE_ENTRY(page_fault)
- RING0_EC_FRAME
- pushl $do_page_fault
+ENTRY(divide_error)
+ RING0_INT_FRAME
+ pushl $0 # no error code
+ CFI_ADJUST_CFA_OFFSET 4
+ pushl $do_divide_error
CFI_ADJUST_CFA_OFFSET 4
jmp error_code
CFI_ENDPROC
- .previous .text
#ifdef CONFIG_X86_MCE
ENTRY(machine_check)
jmp error_code
CFI_ENDPROC
-#ifdef CONFIG_STACK_UNWIND
-ENTRY(arch_unwind_init_running)
+ENTRY(kernel_thread_helper)
+ pushl $0 # fake return address for unwinder
CFI_STARTPROC
- movl 4(%esp), %edx
- movl (%esp), %ecx
- leal 4(%esp), %eax
- movl %ebx, EBX(%edx)
- xorl %ebx, %ebx
- movl %ebx, ECX(%edx)
- movl %ebx, EDX(%edx)
- movl %esi, ESI(%edx)
- movl %edi, EDI(%edx)
- movl %ebp, EBP(%edx)
- movl %ebx, EAX(%edx)
- movl $__USER_DS, DS(%edx)
- movl $__USER_DS, ES(%edx)
- movl %ebx, ORIG_EAX(%edx)
- movl %ecx, EIP(%edx)
- movl 12(%esp), %ecx
- movl $__KERNEL_CS, CS(%edx)
- movl %ebx, EFLAGS(%edx)
- movl %eax, OLDESP(%edx)
- movl 8(%esp), %eax
- movl %ecx, 8(%esp)
- movl EBX(%edx), %ebx
- movl $__KERNEL_DS, OLDSS(%edx)
- jmpl *%eax
+ movl %edx,%eax
+ push %edx
+ CFI_ADJUST_CFA_OFFSET 4
+ call *%ebx
+ push %eax
+ CFI_ADJUST_CFA_OFFSET 4
+ call do_exit
CFI_ENDPROC
-ENDPROC(arch_unwind_init_running)
-#endif
+ENDPROC(kernel_thread_helper)
.section .rodata,"a"
#include "syscall_table.S"
git://git.onelab.eu / linux-2.6.git / blobdiff