* 18(%esp) - %eax
* 1C(%esp) - %ds
* 20(%esp) - %es
- * 24(%esp) - orig_eax
- * 28(%esp) - %eip
- * 2C(%esp) - %cs
- * 30(%esp) - %eflags
- * 34(%esp) - %oldesp
- * 38(%esp) - %oldss
+ * 24(%esp) - %gs
+ * 28(%esp) - orig_eax
+ * 2C(%esp) - %eip
+ * 30(%esp) - %cs
+ * 34(%esp) - %eflags
+ * 38(%esp) - %oldesp
+ * 3C(%esp) - %oldss
*
* "current" is in register %ebx during any slow entries.
*/
-#include <linux/config.h>
#include <linux/linkage.h>
#include <asm/thread_info.h>
+#include <asm/irqflags.h>
#include <asm/errno.h>
#include <asm/segment.h>
#include <asm/smp.h>
#include <asm/page.h>
#include <asm/desc.h>
+#include <asm/percpu.h>
+#include <asm/dwarf2.h>
#include "irq_vectors.h"
-#define nr_syscalls ((syscall_table_size)/4)
+/*
+ * We use macros for low-level operations which need to be overridden
+ * for paravirtualization. The following will never clobber any registers:
+ * INTERRUPT_RETURN (aka. "iret")
+ * GET_CR0_INTO_EAX (aka. "movl %cr0, %eax")
+ * ENABLE_INTERRUPTS_SYSEXIT (aka "sti; sysexit").
+ *
+ * For DISABLE_INTERRUPTS/ENABLE_INTERRUPTS (aka "cli"/"sti"), you must
+ * specify what registers can be overwritten (CLBR_NONE, CLBR_EAX/EDX/ECX/ANY).
+ * Allowing a register to be clobbered can shrink the paravirt replacement
+ * enough to patch inline, increasing performance.
+ */
-EBX = 0x00
-ECX = 0x04
-EDX = 0x08
-ESI = 0x0C
-EDI = 0x10
-EBP = 0x14
-EAX = 0x18
-DS = 0x1C
-ES = 0x20
-ORIG_EAX = 0x24
-EIP = 0x28
-CS = 0x2C
-EFLAGS = 0x30
-OLDESP = 0x34
-OLDSS = 0x38
+#define nr_syscalls ((syscall_table_size)/4)
CF_MASK = 0x00000001
TF_MASK = 0x00000100
VM_MASK = 0x00020000
#ifdef CONFIG_PREEMPT
-#define preempt_stop cli
+#define preempt_stop(clobbers) DISABLE_INTERRUPTS(clobbers); TRACE_IRQS_OFF
#else
-#define preempt_stop
+#define preempt_stop(clobbers)
#define resume_kernel restore_nocheck
#endif
+.macro TRACE_IRQS_IRET
+#ifdef CONFIG_TRACE_IRQFLAGS
+ testl $IF_MASK,PT_EFLAGS(%esp) # interrupts off?
+ jz 1f
+ TRACE_IRQS_ON
+1:
+#endif
+.endm
+
+#ifdef CONFIG_VM86
+#define resume_userspace_sig check_userspace
+#else
+#define resume_userspace_sig resume_userspace
+#endif
+
#define SAVE_ALL \
cld; \
+ pushl %gs; \
+ CFI_ADJUST_CFA_OFFSET 4;\
+ /*CFI_REL_OFFSET gs, 0;*/\
pushl %es; \
+ CFI_ADJUST_CFA_OFFSET 4;\
+ /*CFI_REL_OFFSET es, 0;*/\
pushl %ds; \
+ CFI_ADJUST_CFA_OFFSET 4;\
+ /*CFI_REL_OFFSET ds, 0;*/\
pushl %eax; \
+ CFI_ADJUST_CFA_OFFSET 4;\
+ CFI_REL_OFFSET eax, 0;\
pushl %ebp; \
+ CFI_ADJUST_CFA_OFFSET 4;\
+ CFI_REL_OFFSET ebp, 0;\
pushl %edi; \
+ CFI_ADJUST_CFA_OFFSET 4;\
+ CFI_REL_OFFSET edi, 0;\
pushl %esi; \
+ CFI_ADJUST_CFA_OFFSET 4;\
+ CFI_REL_OFFSET esi, 0;\
pushl %edx; \
+ CFI_ADJUST_CFA_OFFSET 4;\
+ CFI_REL_OFFSET edx, 0;\
pushl %ecx; \
+ CFI_ADJUST_CFA_OFFSET 4;\
+ CFI_REL_OFFSET ecx, 0;\
pushl %ebx; \
+ CFI_ADJUST_CFA_OFFSET 4;\
+ CFI_REL_OFFSET ebx, 0;\
movl $(__USER_DS), %edx; \
movl %edx, %ds; \
- movl %edx, %es;
+ movl %edx, %es; \
+ movl $(__KERNEL_PDA), %edx; \
+ movl %edx, %gs
#define RESTORE_INT_REGS \
popl %ebx; \
+ CFI_ADJUST_CFA_OFFSET -4;\
+ CFI_RESTORE ebx;\
popl %ecx; \
+ CFI_ADJUST_CFA_OFFSET -4;\
+ CFI_RESTORE ecx;\
popl %edx; \
+ CFI_ADJUST_CFA_OFFSET -4;\
+ CFI_RESTORE edx;\
popl %esi; \
+ CFI_ADJUST_CFA_OFFSET -4;\
+ CFI_RESTORE esi;\
popl %edi; \
+ CFI_ADJUST_CFA_OFFSET -4;\
+ CFI_RESTORE edi;\
popl %ebp; \
- popl %eax
+ CFI_ADJUST_CFA_OFFSET -4;\
+ CFI_RESTORE ebp;\
+ popl %eax; \
+ CFI_ADJUST_CFA_OFFSET -4;\
+ CFI_RESTORE eax
#define RESTORE_REGS \
RESTORE_INT_REGS; \
1: popl %ds; \
+ CFI_ADJUST_CFA_OFFSET -4;\
+ /*CFI_RESTORE ds;*/\
2: popl %es; \
-.section .fixup,"ax"; \
-3: movl $0,(%esp); \
- jmp 1b; \
+ CFI_ADJUST_CFA_OFFSET -4;\
+ /*CFI_RESTORE es;*/\
+3: popl %gs; \
+ CFI_ADJUST_CFA_OFFSET -4;\
+ /*CFI_RESTORE gs;*/\
+.pushsection .fixup,"ax"; \
4: movl $0,(%esp); \
+ jmp 1b; \
+5: movl $0,(%esp); \
jmp 2b; \
-.previous; \
+6: movl $0,(%esp); \
+ jmp 3b; \
.section __ex_table,"a";\
.align 4; \
- .long 1b,3b; \
- .long 2b,4b; \
-.previous
-
+ .long 1b,4b; \
+ .long 2b,5b; \
+ .long 3b,6b; \
+.popsection
+
+#define RING0_INT_FRAME \
+ CFI_STARTPROC simple;\
+ CFI_SIGNAL_FRAME;\
+ CFI_DEF_CFA esp, 3*4;\
+ /*CFI_OFFSET cs, -2*4;*/\
+ CFI_OFFSET eip, -3*4
+
+#define RING0_EC_FRAME \
+ CFI_STARTPROC simple;\
+ CFI_SIGNAL_FRAME;\
+ CFI_DEF_CFA esp, 4*4;\
+ /*CFI_OFFSET cs, -2*4;*/\
+ CFI_OFFSET eip, -3*4
+
+#define RING0_PTREGS_FRAME \
+ CFI_STARTPROC simple;\
+ CFI_SIGNAL_FRAME;\
+ CFI_DEF_CFA esp, PT_OLDESP-PT_EBX;\
+ /*CFI_OFFSET cs, PT_CS-PT_OLDESP;*/\
+ CFI_OFFSET eip, PT_EIP-PT_OLDESP;\
+ /*CFI_OFFSET es, PT_ES-PT_OLDESP;*/\
+ /*CFI_OFFSET ds, PT_DS-PT_OLDESP;*/\
+ CFI_OFFSET eax, PT_EAX-PT_OLDESP;\
+ CFI_OFFSET ebp, PT_EBP-PT_OLDESP;\
+ CFI_OFFSET edi, PT_EDI-PT_OLDESP;\
+ CFI_OFFSET esi, PT_ESI-PT_OLDESP;\
+ CFI_OFFSET edx, PT_EDX-PT_OLDESP;\
+ CFI_OFFSET ecx, PT_ECX-PT_OLDESP;\
+ CFI_OFFSET ebx, PT_EBX-PT_OLDESP
ENTRY(ret_from_fork)
+ CFI_STARTPROC
pushl %eax
+ CFI_ADJUST_CFA_OFFSET 4
call schedule_tail
GET_THREAD_INFO(%ebp)
popl %eax
+ CFI_ADJUST_CFA_OFFSET -4
pushl $0x0202 # Reset kernel eflags
+ CFI_ADJUST_CFA_OFFSET 4
popfl
+ CFI_ADJUST_CFA_OFFSET -4
jmp syscall_exit
+ CFI_ENDPROC
/*
* Return to user mode is not as complex as all this looks,
# userspace resumption stub bypassing syscall exit tracing
ALIGN
+ RING0_PTREGS_FRAME
ret_from_exception:
- preempt_stop
+ preempt_stop(CLBR_ANY)
ret_from_intr:
GET_THREAD_INFO(%ebp)
- movl EFLAGS(%esp), %eax # mix EFLAGS and CS
- movb CS(%esp), %al
- testl $(VM_MASK | 3), %eax
- jz resume_kernel
+check_userspace:
+ movl PT_EFLAGS(%esp), %eax # mix EFLAGS and CS
+ movb PT_CS(%esp), %al
+ andl $(VM_MASK | SEGMENT_RPL_MASK), %eax
+ cmpl $USER_RPL, %eax
+ jb resume_kernel # not returning to v8086 or userspace
+
ENTRY(resume_userspace)
- cli # make sure we don't miss an interrupt
+ DISABLE_INTERRUPTS(CLBR_ANY) # make sure we don't miss an interrupt
# setting need_resched or sigpending
# between sampling and the iret
movl TI_flags(%ebp), %ecx
#ifdef CONFIG_PREEMPT
ENTRY(resume_kernel)
- cli
+ DISABLE_INTERRUPTS(CLBR_ANY)
cmpl $0,TI_preempt_count(%ebp) # non-zero preempt_count ?
jnz restore_nocheck
need_resched:
movl TI_flags(%ebp), %ecx # need_resched set ?
testb $_TIF_NEED_RESCHED, %cl
jz restore_all
- testl $IF_MASK,EFLAGS(%esp) # interrupts off (exception path) ?
+ testl $IF_MASK,PT_EFLAGS(%esp) # interrupts off (exception path) ?
jz restore_all
call preempt_schedule_irq
jmp need_resched
#endif
+ CFI_ENDPROC
/* SYSENTER_RETURN points to after the "sysenter" instruction in
the vsyscall page. See vsyscall-sysentry.S, which defines the symbol. */
# sysenter call handler stub
ENTRY(sysenter_entry)
- movl TSS_sysenter_esp0(%esp),%esp
+ CFI_STARTPROC simple
+ CFI_SIGNAL_FRAME
+ CFI_DEF_CFA esp, 0
+ CFI_REGISTER esp, ebp
+ movl SYSENTER_stack_esp0(%esp),%esp
sysenter_past_esp:
- sti
+ /*
+ * No need to follow this irqs on/off section: the syscall
+ * disabled irqs and here we enable it straight after entry:
+ */
+ ENABLE_INTERRUPTS(CLBR_NONE)
pushl $(__USER_DS)
+ CFI_ADJUST_CFA_OFFSET 4
+ /*CFI_REL_OFFSET ss, 0*/
pushl %ebp
+ CFI_ADJUST_CFA_OFFSET 4
+ CFI_REL_OFFSET esp, 0
pushfl
+ CFI_ADJUST_CFA_OFFSET 4
pushl $(__USER_CS)
+ CFI_ADJUST_CFA_OFFSET 4
+ /*CFI_REL_OFFSET cs, 0*/
+#ifndef CONFIG_COMPAT_VDSO
+ /*
+ * Push current_thread_info()->sysenter_return to the stack.
+ * A tiny bit of offset fixup is necessary - 4*4 means the 4 words
+ * pushed above; +8 corresponds to copy_thread's esp0 setting.
+ */
+ pushl (TI_sysenter_return-THREAD_SIZE+8+4*4)(%esp)
+#else
pushl $SYSENTER_RETURN
+#endif
+ CFI_ADJUST_CFA_OFFSET 4
+ CFI_REL_OFFSET eip, 0
/*
* Load the potential sixth argument from user stack.
.previous
pushl %eax
+ CFI_ADJUST_CFA_OFFSET 4
SAVE_ALL
GET_THREAD_INFO(%ebp)
/* Note, _TIF_SECCOMP is bit number 8, and so it needs testw and not testb */
- testw $(_TIF_SYSCALL_EMU|_TIF_SYSCALL_TRACE|_TIF_SECCOMP|_TIF_SYSCALL_AUDIT),TI_flags(%ebp)
+ testw $(_TIF_SYSCALL_TRACE|_TIF_SECCOMP|_TIF_SYSCALL_AUDIT),TI_flags(%ebp)
jnz syscall_trace_entry
cmpl $(nr_syscalls), %eax
jae syscall_badsys
call *sys_call_table(,%eax,4)
- movl %eax,EAX(%esp)
- cli
+ movl %eax,PT_EAX(%esp)
+ DISABLE_INTERRUPTS(CLBR_ECX|CLBR_EDX)
+ TRACE_IRQS_OFF
movl TI_flags(%ebp), %ecx
testw $_TIF_ALLWORK_MASK, %cx
jne syscall_exit_work
/* if something modifies registers it must also disable sysexit */
- movl EIP(%esp), %edx
- movl OLDESP(%esp), %ecx
+ movl PT_EIP(%esp), %edx
+ movl PT_OLDESP(%esp), %ecx
xorl %ebp,%ebp
- sti
- sysexit
-
+ TRACE_IRQS_ON
+1: mov PT_GS(%esp), %gs
+ ENABLE_INTERRUPTS_SYSEXIT
+ CFI_ENDPROC
+.pushsection .fixup,"ax"
+2: movl $0,PT_GS(%esp)
+ jmp 1b
+.section __ex_table,"a"
+ .align 4
+ .long 1b,2b
+.popsection
# system call handler stub
ENTRY(system_call)
+ RING0_INT_FRAME # can't unwind into user space anyway
pushl %eax # save orig_eax
+ CFI_ADJUST_CFA_OFFSET 4
SAVE_ALL
GET_THREAD_INFO(%ebp)
+ testl $TF_MASK,PT_EFLAGS(%esp)
+ jz no_singlestep
+ orl $_TIF_SINGLESTEP,TI_flags(%ebp)
+no_singlestep:
# system call tracing in operation / emulation
/* Note, _TIF_SECCOMP is bit number 8, and so it needs testw and not testb */
- testw $(_TIF_SYSCALL_EMU|_TIF_SYSCALL_TRACE|_TIF_SECCOMP|_TIF_SYSCALL_AUDIT),TI_flags(%ebp)
+ testw $(_TIF_SYSCALL_TRACE|_TIF_SECCOMP|_TIF_SYSCALL_AUDIT),TI_flags(%ebp)
jnz syscall_trace_entry
cmpl $(nr_syscalls), %eax
jae syscall_badsys
syscall_call:
call *sys_call_table(,%eax,4)
- movl %eax,EAX(%esp) # store the return value
+ movl %eax,PT_EAX(%esp) # store the return value
syscall_exit:
- cli # make sure we don't miss an interrupt
+ DISABLE_INTERRUPTS(CLBR_ANY) # make sure we don't miss an interrupt
# setting need_resched or sigpending
# between sampling and the iret
+ TRACE_IRQS_OFF
movl TI_flags(%ebp), %ecx
testw $_TIF_ALLWORK_MASK, %cx # current->work
jne syscall_exit_work
restore_all:
- movl EFLAGS(%esp), %eax # mix EFLAGS, SS and CS
- # Warning: OLDSS(%esp) contains the wrong/random values if we
+ movl PT_EFLAGS(%esp), %eax # mix EFLAGS, SS and CS
+ # Warning: PT_OLDSS(%esp) contains the wrong/random values if we
# are returning to the kernel.
# See comments in process.c:copy_thread() for details.
- movb OLDSS(%esp), %ah
- movb CS(%esp), %al
- andl $(VM_MASK | (4 << 8) | 3), %eax
- cmpl $((4 << 8) | 3), %eax
+ movb PT_OLDSS(%esp), %ah
+ movb PT_CS(%esp), %al
+ andl $(VM_MASK | (SEGMENT_TI_MASK << 8) | SEGMENT_RPL_MASK), %eax
+ cmpl $((SEGMENT_LDT << 8) | USER_RPL), %eax
+ CFI_REMEMBER_STATE
je ldt_ss # returning to user-space with LDT SS
restore_nocheck:
+ TRACE_IRQS_IRET
+restore_nocheck_notrace:
RESTORE_REGS
- addl $4, %esp
-1: iret
+ addl $4, %esp # skip orig_eax/error_code
+ CFI_ADJUST_CFA_OFFSET -4
+1: INTERRUPT_RETURN
.section .fixup,"ax"
iret_exc:
- sti
+ TRACE_IRQS_ON
+ ENABLE_INTERRUPTS(CLBR_NONE)
pushl $0 # no error code
pushl $do_iret_error
jmp error_code
.long 1b,iret_exc
.previous
+ CFI_RESTORE_STATE
ldt_ss:
- larl OLDSS(%esp), %eax
+ larl PT_OLDSS(%esp), %eax
jnz restore_nocheck
testl $0x00400000, %eax # returning to 32bit stack?
jnz restore_nocheck # allright, normal return
+
+#ifdef CONFIG_PARAVIRT
+ /*
+ * The kernel can't run on a non-flat stack if paravirt mode
+ * is active. Rather than try to fixup the high bits of
+ * ESP, bypass this code entirely. This may break DOSemu
+ * and/or Wine support in a paravirt VM, although the option
+ * is still available to implement the setting of the high
+ * 16-bits in the INTERRUPT_RETURN paravirt-op.
+ */
+ cmpl $0, paravirt_ops+PARAVIRT_enabled
+ jne restore_nocheck
+#endif
+
/* If returning to userspace with 16bit stack,
* try to fix the higher word of ESP, as the CPU
* won't restore it.
* This is an "official" bug of all the x86-compatible
* CPUs, which we can try to work around to make
* dosemu and wine happy. */
- subl $8, %esp # reserve space for switch16 pointer
- cli
- movl %esp, %eax
- /* Set up the 16bit stack frame with switch32 pointer on top,
- * and a switch16 pointer on top of the current frame. */
- call setup_x86_bogus_stack
- RESTORE_REGS
- lss 20+4(%esp), %esp # switch to 16bit stack
-1: iret
-.section __ex_table,"a"
- .align 4
- .long 1b,iret_exc
-.previous
+ movl PT_OLDESP(%esp), %eax
+ movl %esp, %edx
+ call patch_espfix_desc
+ pushl $__ESPFIX_SS
+ CFI_ADJUST_CFA_OFFSET 4
+ pushl %eax
+ CFI_ADJUST_CFA_OFFSET 4
+ DISABLE_INTERRUPTS(CLBR_EAX)
+ TRACE_IRQS_OFF
+ lss (%esp), %esp
+ CFI_ADJUST_CFA_OFFSET -8
+ jmp restore_nocheck
+ CFI_ENDPROC
# perform work that needs to be done immediately before resumption
ALIGN
+ RING0_PTREGS_FRAME # can't unwind into user space anyway
work_pending:
testb $_TIF_NEED_RESCHED, %cl
jz work_notifysig
work_resched:
call schedule
- cli # make sure we don't miss an interrupt
+ DISABLE_INTERRUPTS(CLBR_ANY) # make sure we don't miss an interrupt
# setting need_resched or sigpending
# between sampling and the iret
+ TRACE_IRQS_OFF
movl TI_flags(%ebp), %ecx
andl $_TIF_WORK_MASK, %ecx # is there any work to be done other
# than syscall tracing?
work_notifysig: # deal with pending signals and
# notify-resume requests
- testl $VM_MASK, EFLAGS(%esp)
+#ifdef CONFIG_VM86
+ testl $VM_MASK, PT_EFLAGS(%esp)
movl %esp, %eax
jne work_notifysig_v86 # returning to kernel-space or
# vm86-space
xorl %edx, %edx
call do_notify_resume
- jmp resume_userspace
+ jmp resume_userspace_sig
ALIGN
work_notifysig_v86:
-#ifdef CONFIG_VM86
pushl %ecx # save ti_flags for do_notify_resume
+ CFI_ADJUST_CFA_OFFSET 4
call save_v86_state # %eax contains pt_regs pointer
popl %ecx
+ CFI_ADJUST_CFA_OFFSET -4
movl %eax, %esp
+#else
+ movl %esp, %eax
+#endif
xorl %edx, %edx
call do_notify_resume
- jmp resume_userspace
-#endif
+ jmp resume_userspace_sig
# perform syscall exit tracing
ALIGN
syscall_trace_entry:
- movl $-ENOSYS,EAX(%esp)
+ movl $-ENOSYS,PT_EAX(%esp)
movl %esp, %eax
xorl %edx,%edx
call do_syscall_trace
- cmpl $0, %eax
- jne resume_userspace # ret != 0 -> running under PTRACE_SYSEMU,
- # so must skip actual syscall
- movl ORIG_EAX(%esp), %eax
+ movl PT_ORIG_EAX(%esp), %eax
cmpl $(nr_syscalls), %eax
jnae syscall_call
jmp syscall_exit
syscall_exit_work:
testb $(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT|_TIF_SINGLESTEP), %cl
jz work_pending
- sti # could let do_syscall_trace() call
+ TRACE_IRQS_ON
+ ENABLE_INTERRUPTS(CLBR_ANY) # could let do_syscall_trace() call
# schedule() instead
movl %esp, %eax
movl $1, %edx
call do_syscall_trace
jmp resume_userspace
+ CFI_ENDPROC
- ALIGN
+ RING0_INT_FRAME # can't unwind into user space anyway
syscall_fault:
pushl %eax # save orig_eax
+ CFI_ADJUST_CFA_OFFSET 4
SAVE_ALL
GET_THREAD_INFO(%ebp)
- movl $-EFAULT,EAX(%esp)
+ movl $-EFAULT,PT_EAX(%esp)
jmp resume_userspace
- ALIGN
syscall_badsys:
- movl $-ENOSYS,EAX(%esp)
+ movl $-ENOSYS,PT_EAX(%esp)
jmp resume_userspace
+ CFI_ENDPROC
#define FIXUP_ESPFIX_STACK \
- movl %esp, %eax; \
- /* switch to 32bit stack using the pointer on top of 16bit stack */ \
- lss %ss:CPU_16BIT_STACK_SIZE-8, %esp; \
- /* copy data from 16bit stack to 32bit stack */ \
- call fixup_x86_bogus_stack; \
- /* put ESP to the proper location */ \
- movl %eax, %esp;
-#define UNWIND_ESPFIX_STACK \
+ /* since we are on a wrong stack, we cant make it a C code :( */ \
+ movl %gs:PDA_cpu, %ebx; \
+ PER_CPU(cpu_gdt_descr, %ebx); \
+ movl GDS_address(%ebx), %ebx; \
+ GET_DESC_BASE(GDT_ENTRY_ESPFIX_SS, %ebx, %eax, %ax, %al, %ah); \
+ addl %esp, %eax; \
+ pushl $__KERNEL_DS; \
+ CFI_ADJUST_CFA_OFFSET 4; \
pushl %eax; \
+ CFI_ADJUST_CFA_OFFSET 4; \
+ lss (%esp), %esp; \
+ CFI_ADJUST_CFA_OFFSET -8;
+#define UNWIND_ESPFIX_STACK \
movl %ss, %eax; \
- /* see if on 16bit stack */ \
+ /* see if on espfix stack */ \
cmpw $__ESPFIX_SS, %ax; \
- jne 28f; \
- movl $__KERNEL_DS, %edx; \
- movl %edx, %ds; \
- movl %edx, %es; \
- /* switch to 32bit stack */ \
- FIXUP_ESPFIX_STACK \
-28: popl %eax;
+ jne 27f; \
+ movl $__KERNEL_DS, %eax; \
+ movl %eax, %ds; \
+ movl %eax, %es; \
+ /* switch to normal stack */ \
+ FIXUP_ESPFIX_STACK; \
+27:;
/*
* Build the entry stubs and pointer table with
vector=0
ENTRY(irq_entries_start)
+ RING0_INT_FRAME
.rept NR_IRQS
ALIGN
-1: pushl $vector-256
+ .if vector
+ CFI_ADJUST_CFA_OFFSET -4
+ .endif
+1: pushl $~(vector)
+ CFI_ADJUST_CFA_OFFSET 4
jmp common_interrupt
.data
.long 1b
vector=vector+1
.endr
+/*
+ * the CPU automatically disables interrupts when executing an IRQ vector,
+ * so IRQ-flags tracing has to follow that:
+ */
ALIGN
common_interrupt:
SAVE_ALL
+ TRACE_IRQS_OFF
movl %esp,%eax
call do_IRQ
jmp ret_from_intr
+ CFI_ENDPROC
#define BUILD_INTERRUPT(name, nr) \
ENTRY(name) \
- pushl $nr-256; \
- SAVE_ALL \
+ RING0_INT_FRAME; \
+ pushl $~(nr); \
+ CFI_ADJUST_CFA_OFFSET 4; \
+ SAVE_ALL; \
+ TRACE_IRQS_OFF \
movl %esp,%eax; \
call smp_/**/name; \
- jmp ret_from_intr;
+ jmp ret_from_intr; \
+ CFI_ENDPROC
/* The include is where all of the SMP etc. interrupts come from */
#include "entry_arch.h"
-ENTRY(divide_error)
- pushl $0 # no error code
- pushl $do_divide_error
+KPROBE_ENTRY(page_fault)
+ RING0_EC_FRAME
+ pushl $do_page_fault
+ CFI_ADJUST_CFA_OFFSET 4
ALIGN
error_code:
+ /* the function address is in %gs's slot on the stack */
+ pushl %es
+ CFI_ADJUST_CFA_OFFSET 4
+ /*CFI_REL_OFFSET es, 0*/
pushl %ds
+ CFI_ADJUST_CFA_OFFSET 4
+ /*CFI_REL_OFFSET ds, 0*/
pushl %eax
- xorl %eax, %eax
+ CFI_ADJUST_CFA_OFFSET 4
+ CFI_REL_OFFSET eax, 0
pushl %ebp
+ CFI_ADJUST_CFA_OFFSET 4
+ CFI_REL_OFFSET ebp, 0
pushl %edi
+ CFI_ADJUST_CFA_OFFSET 4
+ CFI_REL_OFFSET edi, 0
pushl %esi
+ CFI_ADJUST_CFA_OFFSET 4
+ CFI_REL_OFFSET esi, 0
pushl %edx
- decl %eax # eax = -1
+ CFI_ADJUST_CFA_OFFSET 4
+ CFI_REL_OFFSET edx, 0
pushl %ecx
+ CFI_ADJUST_CFA_OFFSET 4
+ CFI_REL_OFFSET ecx, 0
pushl %ebx
+ CFI_ADJUST_CFA_OFFSET 4
+ CFI_REL_OFFSET ebx, 0
cld
- pushl %es
+ pushl %gs
+ CFI_ADJUST_CFA_OFFSET 4
+ /*CFI_REL_OFFSET gs, 0*/
+ movl $(__KERNEL_PDA), %ecx
+ movl %ecx, %gs
UNWIND_ESPFIX_STACK
popl %ecx
- movl ES(%esp), %edi # get the function address
- movl ORIG_EAX(%esp), %edx # get the error code
- movl %eax, ORIG_EAX(%esp)
- movl %ecx, ES(%esp)
+ CFI_ADJUST_CFA_OFFSET -4
+ /*CFI_REGISTER es, ecx*/
+ movl PT_GS(%esp), %edi # get the function address
+ movl PT_ORIG_EAX(%esp), %edx # get the error code
+ movl $-1, PT_ORIG_EAX(%esp) # no syscall to restart
+ mov %ecx, PT_GS(%esp)
+ /*CFI_REL_OFFSET gs, ES*/
movl $(__USER_DS), %ecx
movl %ecx, %ds
movl %ecx, %es
movl %esp,%eax # pt_regs pointer
call *%edi
jmp ret_from_exception
+ CFI_ENDPROC
+KPROBE_END(page_fault)
ENTRY(coprocessor_error)
+ RING0_INT_FRAME
pushl $0
+ CFI_ADJUST_CFA_OFFSET 4
pushl $do_coprocessor_error
+ CFI_ADJUST_CFA_OFFSET 4
jmp error_code
+ CFI_ENDPROC
ENTRY(simd_coprocessor_error)
+ RING0_INT_FRAME
pushl $0
+ CFI_ADJUST_CFA_OFFSET 4
pushl $do_simd_coprocessor_error
+ CFI_ADJUST_CFA_OFFSET 4
jmp error_code
+ CFI_ENDPROC
ENTRY(device_not_available)
+ RING0_INT_FRAME
pushl $-1 # mark this as an int
+ CFI_ADJUST_CFA_OFFSET 4
SAVE_ALL
- movl %cr0, %eax
+ GET_CR0_INTO_EAX
testl $0x4, %eax # EM (math emulation bit)
jne device_not_available_emulate
- preempt_stop
+ preempt_stop(CLBR_ANY)
call math_state_restore
jmp ret_from_exception
device_not_available_emulate:
pushl $0 # temporary storage for ORIG_EIP
+ CFI_ADJUST_CFA_OFFSET 4
call math_emulate
addl $4, %esp
+ CFI_ADJUST_CFA_OFFSET -4
jmp ret_from_exception
+ CFI_ENDPROC
/*
* Debug traps and NMI can happen at the one SYSENTER instruction
* that sets up the real kernel stack. Check here, since we can't
* allow the wrong stack to be used.
*
- * "TSS_sysenter_esp0+12" is because the NMI/debug handler will have
+ * "SYSENTER_stack_esp0+12" is because the NMI/debug handler will have
* already pushed 3 words if it hits on the sysenter instruction:
* eflags, cs and eip.
*
cmpw $__KERNEL_CS,4(%esp); \
jne ok; \
label: \
- movl TSS_sysenter_esp0+offset(%esp),%esp; \
+ movl SYSENTER_stack_esp0+offset(%esp),%esp; \
+ CFI_DEF_CFA esp, 0; \
+ CFI_UNDEFINED eip; \
pushfl; \
+ CFI_ADJUST_CFA_OFFSET 4; \
pushl $__KERNEL_CS; \
- pushl $sysenter_past_esp
+ CFI_ADJUST_CFA_OFFSET 4; \
+ pushl $sysenter_past_esp; \
+ CFI_ADJUST_CFA_OFFSET 4; \
+ CFI_REL_OFFSET eip, 0
KPROBE_ENTRY(debug)
+ RING0_INT_FRAME
cmpl $sysenter_entry,(%esp)
jne debug_stack_correct
FIX_STACK(12, debug_stack_correct, debug_esp_fix_insn)
debug_stack_correct:
pushl $-1 # mark this as an int
+ CFI_ADJUST_CFA_OFFSET 4
SAVE_ALL
xorl %edx,%edx # error code 0
movl %esp,%eax # pt_regs pointer
call do_debug
jmp ret_from_exception
- .previous .text
+ CFI_ENDPROC
+KPROBE_END(debug)
+
/*
* NMI is doubly nasty. It can happen _while_ we're handling
* a debug fault, and the debug fault hasn't yet been able to
* check whether we got an NMI on the debug path where the debug
* fault happened on the sysenter path.
*/
-ENTRY(nmi)
+KPROBE_ENTRY(nmi)
+ RING0_INT_FRAME
pushl %eax
+ CFI_ADJUST_CFA_OFFSET 4
movl %ss, %eax
cmpw $__ESPFIX_SS, %ax
popl %eax
- je nmi_16bit_stack
+ CFI_ADJUST_CFA_OFFSET -4
+ je nmi_espfix_stack
cmpl $sysenter_entry,(%esp)
je nmi_stack_fixup
pushl %eax
+ CFI_ADJUST_CFA_OFFSET 4
movl %esp,%eax
/* Do not access memory above the end of our stack page,
* it might not exist.
andl $(THREAD_SIZE-1),%eax
cmpl $(THREAD_SIZE-20),%eax
popl %eax
+ CFI_ADJUST_CFA_OFFSET -4
jae nmi_stack_correct
cmpl $sysenter_entry,12(%esp)
je nmi_debug_stack_check
nmi_stack_correct:
+ /* We have a RING0_INT_FRAME here */
pushl %eax
+ CFI_ADJUST_CFA_OFFSET 4
SAVE_ALL
xorl %edx,%edx # zero error code
movl %esp,%eax # pt_regs pointer
call do_nmi
- jmp restore_all
+ jmp restore_nocheck_notrace
+ CFI_ENDPROC
nmi_stack_fixup:
+ RING0_INT_FRAME
FIX_STACK(12,nmi_stack_correct, 1)
jmp nmi_stack_correct
+
nmi_debug_stack_check:
+ /* We have a RING0_INT_FRAME here */
cmpw $__KERNEL_CS,16(%esp)
jne nmi_stack_correct
cmpl $debug,(%esp)
FIX_STACK(24,nmi_stack_correct, 1)
jmp nmi_stack_correct
-nmi_16bit_stack:
- /* create the pointer to lss back */
+nmi_espfix_stack:
+ /* We have a RING0_INT_FRAME here.
+ *
+ * create the pointer to lss back
+ */
pushl %ss
+ CFI_ADJUST_CFA_OFFSET 4
pushl %esp
- movzwl %sp, %esp
+ CFI_ADJUST_CFA_OFFSET 4
addw $4, (%esp)
/* copy the iret frame of 12 bytes */
.rept 3
pushl 16(%esp)
+ CFI_ADJUST_CFA_OFFSET 4
.endr
pushl %eax
+ CFI_ADJUST_CFA_OFFSET 4
SAVE_ALL
FIXUP_ESPFIX_STACK # %eax == %esp
xorl %edx,%edx # zero error code
call do_nmi
RESTORE_REGS
- lss 12+4(%esp), %esp # back to 16bit stack
+ lss 12+4(%esp), %esp # back to espfix stack
+ CFI_ADJUST_CFA_OFFSET -24
+1: INTERRUPT_RETURN
+ CFI_ENDPROC
+.section __ex_table,"a"
+ .align 4
+ .long 1b,iret_exc
+.previous
+KPROBE_END(nmi)
+
+#ifdef CONFIG_PARAVIRT
+ENTRY(native_iret)
1: iret
.section __ex_table,"a"
.align 4
.long 1b,iret_exc
.previous
+ENTRY(native_irq_enable_sysexit)
+ sti
+ sysexit
+#endif
+
KPROBE_ENTRY(int3)
+ RING0_INT_FRAME
pushl $-1 # mark this as an int
+ CFI_ADJUST_CFA_OFFSET 4
SAVE_ALL
xorl %edx,%edx # zero error code
movl %esp,%eax # pt_regs pointer
call do_int3
jmp ret_from_exception
- .previous .text
+ CFI_ENDPROC
+KPROBE_END(int3)
ENTRY(overflow)
+ RING0_INT_FRAME
pushl $0
+ CFI_ADJUST_CFA_OFFSET 4
pushl $do_overflow
+ CFI_ADJUST_CFA_OFFSET 4
jmp error_code
+ CFI_ENDPROC
ENTRY(bounds)
+ RING0_INT_FRAME
pushl $0
+ CFI_ADJUST_CFA_OFFSET 4
pushl $do_bounds
+ CFI_ADJUST_CFA_OFFSET 4
jmp error_code
+ CFI_ENDPROC
ENTRY(invalid_op)
+ RING0_INT_FRAME
pushl $0
+ CFI_ADJUST_CFA_OFFSET 4
pushl $do_invalid_op
+ CFI_ADJUST_CFA_OFFSET 4
jmp error_code
+ CFI_ENDPROC
ENTRY(coprocessor_segment_overrun)
+ RING0_INT_FRAME
pushl $0
+ CFI_ADJUST_CFA_OFFSET 4
pushl $do_coprocessor_segment_overrun
+ CFI_ADJUST_CFA_OFFSET 4
jmp error_code
+ CFI_ENDPROC
ENTRY(invalid_TSS)
+ RING0_EC_FRAME
pushl $do_invalid_TSS
+ CFI_ADJUST_CFA_OFFSET 4
jmp error_code
+ CFI_ENDPROC
ENTRY(segment_not_present)
+ RING0_EC_FRAME
pushl $do_segment_not_present
+ CFI_ADJUST_CFA_OFFSET 4
jmp error_code
+ CFI_ENDPROC
ENTRY(stack_segment)
+ RING0_EC_FRAME
pushl $do_stack_segment
+ CFI_ADJUST_CFA_OFFSET 4
jmp error_code
+ CFI_ENDPROC
KPROBE_ENTRY(general_protection)
+ RING0_EC_FRAME
pushl $do_general_protection
+ CFI_ADJUST_CFA_OFFSET 4
jmp error_code
- .previous .text
+ CFI_ENDPROC
+KPROBE_END(general_protection)
ENTRY(alignment_check)
+ RING0_EC_FRAME
pushl $do_alignment_check
+ CFI_ADJUST_CFA_OFFSET 4
jmp error_code
+ CFI_ENDPROC
-KPROBE_ENTRY(page_fault)
- pushl $do_page_fault
+ENTRY(divide_error)
+ RING0_INT_FRAME
+ pushl $0 # no error code
+ CFI_ADJUST_CFA_OFFSET 4
+ pushl $do_divide_error
+ CFI_ADJUST_CFA_OFFSET 4
jmp error_code
- .previous .text
+ CFI_ENDPROC
#ifdef CONFIG_X86_MCE
ENTRY(machine_check)
+ RING0_INT_FRAME
pushl $0
+ CFI_ADJUST_CFA_OFFSET 4
pushl machine_check_vector
+ CFI_ADJUST_CFA_OFFSET 4
jmp error_code
+ CFI_ENDPROC
#endif
ENTRY(spurious_interrupt_bug)
+ RING0_INT_FRAME
pushl $0
+ CFI_ADJUST_CFA_OFFSET 4
pushl $do_spurious_interrupt_bug
+ CFI_ADJUST_CFA_OFFSET 4
jmp error_code
+ CFI_ENDPROC
+
+ENTRY(kernel_thread_helper)
+ pushl $0 # fake return address for unwinder
+ CFI_STARTPROC
+ movl %edx,%eax
+ push %edx
+ CFI_ADJUST_CFA_OFFSET 4
+ call *%ebx
+ push %eax
+ CFI_ADJUST_CFA_OFFSET 4
+ call do_exit
+ CFI_ENDPROC
+ENDPROC(kernel_thread_helper)
.section .rodata,"a"
#include "syscall_table.S"
git://git.onelab.eu / linux-2.6.git / blobdiff