*/
#include <linux/mm.h>
-#include <linux/irq.h>
#include <linux/interrupt.h>
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/mc146818rtc.h>
#include <linux/compiler.h>
#include <linux/acpi.h>
-
+#include <linux/module.h>
#include <linux/sysdev.h>
+
#include <asm/io.h>
#include <asm/smp.h>
#include <asm/desc.h>
#include <asm/timer.h>
+#include <asm/i8259.h>
#include <mach_apic.h>
int (*ioapic_renumber_irq)(int ioapic, int irq);
atomic_t irq_mis_count;
+/* Where if anywhere is the i8259 connect in external int mode */
+static struct { int pin, apic; } ioapic_i8259 = { -1, -1 };
+
static DEFINE_SPINLOCK(ioapic_lock);
+int timer_over_8254 __initdata = 1;
+
/*
* Is the SiS APIC rmw bug present ?
* -1 = don't know, 0 = no, 1 = yes
*/
int nr_ioapic_registers[MAX_IO_APICS];
+int disable_timer_pin_1 __initdata;
+
/*
* Rough estimation of how many shared IRQs there are, can
* be changed anytime.
int apic, pin, next;
} irq_2_pin[PIN_MAP_SIZE];
-int vector_irq[NR_VECTORS] = { [0 ... NR_VECTORS - 1] = -1};
+int vector_irq[NR_VECTORS] __read_mostly = { [0 ... NR_VECTORS - 1] = -1};
#ifdef CONFIG_PCI_MSI
#define vector_to_irq(vector) \
(platform_legacy_irq(vector) ? vector : vector_irq[vector])
clear_IO_APIC_pin(apic, pin);
}
+#ifdef CONFIG_SMP
static void set_ioapic_affinity_irq(unsigned int irq, cpumask_t cpumask)
{
unsigned long flags;
int pin;
struct irq_pin_list *entry = irq_2_pin + irq;
unsigned int apicid_value;
+ cpumask_t tmp;
+ cpus_and(tmp, cpumask, cpu_online_map);
+ if (cpus_empty(tmp))
+ tmp = TARGET_CPUS;
+
+ cpus_and(cpumask, tmp, CPU_MASK_ALL);
+
apicid_value = cpu_mask_to_apicid(cpumask);
/* Prepare to do the io_apic_write */
apicid_value = apicid_value << 24;
break;
entry = irq_2_pin + entry->next;
}
+ set_irq_info(irq, cpumask);
spin_unlock_irqrestore(&ioapic_lock, flags);
}
# define Dprintk(x...)
# endif
-cpumask_t __cacheline_aligned pending_irq_balance_cpumask[NR_IRQS];
#define IRQBALANCE_CHECK_ARCH -999
static int irqbalance_disabled = IRQBALANCE_CHECK_ARCH;
cpus_and(allowed_mask, cpu_online_map, irq_affinity[irq]);
new_cpu = move(cpu, allowed_mask, now, 1);
if (cpu != new_cpu) {
- irq_desc_t *desc = irq_desc + irq;
- unsigned long flags;
-
- spin_lock_irqsave(&desc->lock, flags);
- pending_irq_balance_cpumask[irq] = cpumask_of_cpu(new_cpu);
- spin_unlock_irqrestore(&desc->lock, flags);
+ set_pending_irq(irq, cpumask_of_cpu(new_cpu));
}
}
{
int i, j;
Dprintk("Rotating IRQs among CPUs.\n");
- for (i = 0; i < NR_CPUS; i++) {
- for (j = 0; cpu_online(i) && (j < NR_IRQS); j++) {
+ for_each_online_cpu(i) {
+ for (j = 0; j < NR_IRQS; j++) {
if (!irq_desc[j].action)
continue;
/* Is it a significant load ? */
unsigned long imbalance = 0;
cpumask_t allowed_mask, target_cpu_mask, tmp;
- for (i = 0; i < NR_CPUS; i++) {
+ for_each_possible_cpu(i) {
int package_index;
CPU_IRQ(i) = 0;
if (!cpu_online(i))
}
}
/* Find the least loaded processor package */
- for (i = 0; i < NR_CPUS; i++) {
- if (!cpu_online(i))
- continue;
+ for_each_online_cpu(i) {
if (i != CPU_TO_PACKAGEINDEX(i))
continue;
if (min_cpu_irq > CPU_IRQ(i)) {
*/
tmp_cpu_irq = 0;
tmp_loaded = -1;
- for (i = 0; i < NR_CPUS; i++) {
- if (!cpu_online(i))
- continue;
+ for_each_online_cpu(i) {
if (i != CPU_TO_PACKAGEINDEX(i))
continue;
if (max_cpu_irq <= CPU_IRQ(i))
cpus_and(tmp, target_cpu_mask, allowed_mask);
if (!cpus_empty(tmp)) {
- irq_desc_t *desc = irq_desc + selected_irq;
- unsigned long flags;
Dprintk("irq = %d moved to cpu = %d\n",
selected_irq, min_loaded);
/* mark for change destination */
- spin_lock_irqsave(&desc->lock, flags);
- pending_irq_balance_cpumask[selected_irq] =
- cpumask_of_cpu(min_loaded);
- spin_unlock_irqrestore(&desc->lock, flags);
+ set_pending_irq(selected_irq, cpumask_of_cpu(min_loaded));
+
/* Since we made a change, come back sooner to
* check for more variation.
*/
/* push everything to CPU 0 to give us a starting point. */
for (i = 0 ; i < NR_IRQS ; i++) {
- pending_irq_balance_cpumask[i] = cpumask_of_cpu(0);
+ pending_irq_cpumask[i] = cpumask_of_cpu(0);
+ set_pending_irq(i, cpumask_of_cpu(0));
}
for ( ; ; ) {
- set_current_state(TASK_INTERRUPTIBLE);
- time_remaining = schedule_timeout(time_remaining);
- try_to_freeze(PF_FREEZE);
+ time_remaining = schedule_timeout_interruptible(time_remaining);
+ try_to_freeze();
if (time_after(jiffies,
prev_balance_time+balanced_irq_interval)) {
+ preempt_disable();
do_irq_balance();
prev_balance_time = jiffies;
time_remaining = balanced_irq_interval;
+ preempt_enable();
}
}
return 0;
if (smp_num_siblings > 1 && !cpus_empty(tmp))
physical_balance = 1;
- for (i = 0; i < NR_CPUS; i++) {
- if (!cpu_online(i))
- continue;
+ for_each_online_cpu(i) {
irq_cpu_data[i].irq_delta = kmalloc(sizeof(unsigned long) * NR_IRQS, GFP_KERNEL);
irq_cpu_data[i].last_irq = kmalloc(sizeof(unsigned long) * NR_IRQS, GFP_KERNEL);
if (irq_cpu_data[i].irq_delta == NULL || irq_cpu_data[i].last_irq == NULL) {
else
printk(KERN_ERR "balanced_irq_init: failed to spawn balanced_irq");
failed:
- for (i = 0; i < NR_CPUS; i++) {
- if(irq_cpu_data[i].irq_delta)
- kfree(irq_cpu_data[i].irq_delta);
- if(irq_cpu_data[i].last_irq)
- kfree(irq_cpu_data[i].last_irq);
+ for_each_possible_cpu(i) {
+ kfree(irq_cpu_data[i].irq_delta);
+ irq_cpu_data[i].irq_delta = NULL;
+ kfree(irq_cpu_data[i].last_irq);
+ irq_cpu_data[i].last_irq = NULL;
}
return 0;
}
int __init irqbalance_disable(char *str)
{
irqbalance_disabled = 1;
- return 0;
+ return 1;
}
__setup("noirqbalance", irqbalance_disable);
-static inline void move_irq(int irq)
-{
- /* note - we hold the desc->lock */
- if (unlikely(!cpus_empty(pending_irq_balance_cpumask[irq]))) {
- set_ioapic_affinity_irq(irq, pending_irq_balance_cpumask[irq]);
- cpus_clear(pending_irq_balance_cpumask[irq]);
- }
-}
-
late_initcall(balanced_irq_init);
-
-#else /* !CONFIG_IRQBALANCE */
-static inline void move_irq(int irq) { }
#endif /* CONFIG_IRQBALANCE */
+#endif /* CONFIG_SMP */
#ifndef CONFIG_SMP
void fastcall send_IPI_self(int vector)
/*
* Find the pin to which IRQ[irq] (ISA) is connected
*/
-static int find_isa_irq_pin(int irq, int type)
+static int __init find_isa_irq_pin(int irq, int type)
{
int i;
return -1;
}
+static int __init find_isa_irq_apic(int irq, int type)
+{
+ int i;
+
+ for (i = 0; i < mp_irq_entries; i++) {
+ int lbus = mp_irqs[i].mpc_srcbus;
+
+ if ((mp_bus_id_to_type[lbus] == MP_BUS_ISA ||
+ mp_bus_id_to_type[lbus] == MP_BUS_EISA ||
+ mp_bus_id_to_type[lbus] == MP_BUS_MCA ||
+ mp_bus_id_to_type[lbus] == MP_BUS_NEC98
+ ) &&
+ (mp_irqs[i].mpc_irqtype == type) &&
+ (mp_irqs[i].mpc_srcbusirq == irq))
+ break;
+ }
+ if (i < mp_irq_entries) {
+ int apic;
+ for(apic = 0; apic < nr_ioapics; apic++) {
+ if (mp_ioapics[apic].mpc_apicid == mp_irqs[i].mpc_dstapic)
+ return apic;
+ }
+ }
+
+ return -1;
+}
+
/*
* Find a specific PCI IRQ entry.
* Not an __init, possibly needed by modules
}
return best_guess;
}
+EXPORT_SYMBOL(IO_APIC_get_PCI_irq_vector);
/*
* This function currently is only a helper for the i386 smp boot process where
* we need to reprogram the ioredtbls to cater for the cpus which have come online
* so mask in all cases should simply be TARGET_CPUS
*/
+#ifdef CONFIG_SMP
void __init setup_ioapic_dest(void)
{
int pin, ioapic, irq, irq_entry;
}
}
+#endif
/*
* EISA Edge/Level control register, ELCR
}
/* irq_vectors is indexed by the sum of all RTEs in all I/O APICs. */
-u8 irq_vector[NR_IRQ_VECTORS] = { FIRST_DEVICE_VECTOR , 0 };
+u8 irq_vector[NR_IRQ_VECTORS] __read_mostly = { FIRST_DEVICE_VECTOR , 0 };
int assign_irq_vector(int irq)
{
spin_lock_irqsave(&ioapic_lock, flags);
io_apic_write(apic, 0x11+2*pin, *(((int *)&entry)+1));
io_apic_write(apic, 0x10+2*pin, *(((int *)&entry)+0));
+ set_native_irq_info(irq, TARGET_CPUS);
spin_unlock_irqrestore(&ioapic_lock, flags);
}
}
/*
* Set up the 8259A-master output pin:
*/
-static void __init setup_ExtINT_IRQ0_pin(unsigned int pin, int vector)
+static void __init setup_ExtINT_IRQ0_pin(unsigned int apic, unsigned int pin, int vector)
{
struct IO_APIC_route_entry entry;
unsigned long flags;
* Add it to the IO-APIC irq-routing table:
*/
spin_lock_irqsave(&ioapic_lock, flags);
- io_apic_write(0, 0x11+2*pin, *(((int *)&entry)+1));
- io_apic_write(0, 0x10+2*pin, *(((int *)&entry)+0));
+ io_apic_write(apic, 0x11+2*pin, *(((int *)&entry)+1));
+ io_apic_write(apic, 0x10+2*pin, *(((int *)&entry)+0));
spin_unlock_irqrestore(&ioapic_lock, flags);
enable_8259A_irq(0);
void /*__init*/ print_PIC(void)
{
- extern spinlock_t i8259A_lock;
unsigned int v;
unsigned long flags;
static void __init enable_IO_APIC(void)
{
union IO_APIC_reg_01 reg_01;
- int i;
+ int i8259_apic, i8259_pin;
+ int i, apic;
unsigned long flags;
for (i = 0; i < PIN_MAP_SIZE; i++) {
/*
* The number of IO-APIC IRQ registers (== #pins):
*/
- for (i = 0; i < nr_ioapics; i++) {
+ for (apic = 0; apic < nr_ioapics; apic++) {
spin_lock_irqsave(&ioapic_lock, flags);
- reg_01.raw = io_apic_read(i, 1);
+ reg_01.raw = io_apic_read(apic, 1);
spin_unlock_irqrestore(&ioapic_lock, flags);
- nr_ioapic_registers[i] = reg_01.bits.entries+1;
+ nr_ioapic_registers[apic] = reg_01.bits.entries+1;
+ }
+ for(apic = 0; apic < nr_ioapics; apic++) {
+ int pin;
+ /* See if any of the pins is in ExtINT mode */
+ for (pin = 0; pin < nr_ioapic_registers[apic]; pin++) {
+ struct IO_APIC_route_entry entry;
+ spin_lock_irqsave(&ioapic_lock, flags);
+ *(((int *)&entry) + 0) = io_apic_read(apic, 0x10 + 2 * pin);
+ *(((int *)&entry) + 1) = io_apic_read(apic, 0x11 + 2 * pin);
+ spin_unlock_irqrestore(&ioapic_lock, flags);
+
+
+ /* If the interrupt line is enabled and in ExtInt mode
+ * I have found the pin where the i8259 is connected.
+ */
+ if ((entry.mask == 0) && (entry.delivery_mode == dest_ExtINT)) {
+ ioapic_i8259.apic = apic;
+ ioapic_i8259.pin = pin;
+ goto found_i8259;
+ }
+ }
+ }
+ found_i8259:
+ /* Look to see what if the MP table has reported the ExtINT */
+ /* If we could not find the appropriate pin by looking at the ioapic
+ * the i8259 probably is not connected the ioapic but give the
+ * mptable a chance anyway.
+ */
+ i8259_pin = find_isa_irq_pin(0, mp_ExtINT);
+ i8259_apic = find_isa_irq_apic(0, mp_ExtINT);
+ /* Trust the MP table if nothing is setup in the hardware */
+ if ((ioapic_i8259.pin == -1) && (i8259_pin >= 0)) {
+ printk(KERN_WARNING "ExtINT not setup in hardware but reported by MP table\n");
+ ioapic_i8259.pin = i8259_pin;
+ ioapic_i8259.apic = i8259_apic;
+ }
+ /* Complain if the MP table and the hardware disagree */
+ if (((ioapic_i8259.apic != i8259_apic) || (ioapic_i8259.pin != i8259_pin)) &&
+ (i8259_pin >= 0) && (ioapic_i8259.pin >= 0))
+ {
+ printk(KERN_WARNING "ExtINT in hardware and MP table differ\n");
}
/*
*/
clear_IO_APIC();
- disconnect_bsp_APIC();
+ /*
+ * If the i8259 is routed through an IOAPIC
+ * Put that IOAPIC in virtual wire mode
+ * so legacy interrupts can be delivered.
+ */
+ if (ioapic_i8259.pin != -1) {
+ struct IO_APIC_route_entry entry;
+ unsigned long flags;
+
+ memset(&entry, 0, sizeof(entry));
+ entry.mask = 0; /* Enabled */
+ entry.trigger = 0; /* Edge */
+ entry.irr = 0;
+ entry.polarity = 0; /* High */
+ entry.delivery_status = 0;
+ entry.dest_mode = 0; /* Physical */
+ entry.delivery_mode = dest_ExtINT; /* ExtInt */
+ entry.vector = 0;
+ entry.dest.physical.physical_dest =
+ GET_APIC_ID(apic_read(APIC_ID));
+
+ /*
+ * Add it to the IO-APIC irq-routing table:
+ */
+ spin_lock_irqsave(&ioapic_lock, flags);
+ io_apic_write(ioapic_i8259.apic, 0x11+2*ioapic_i8259.pin,
+ *(((int *)&entry)+1));
+ io_apic_write(ioapic_i8259.apic, 0x10+2*ioapic_i8259.pin,
+ *(((int *)&entry)+0));
+ spin_unlock_irqrestore(&ioapic_lock, flags);
+ }
+ disconnect_bsp_APIC(ioapic_i8259.pin != -1);
}
/*
unsigned char old_id;
unsigned long flags;
+ /*
+ * Don't check I/O APIC IDs for xAPIC systems. They have
+ * no meaning without the serial APIC bus.
+ */
+ if (!(boot_cpu_data.x86_vendor == X86_VENDOR_INTEL)
+ || APIC_XAPIC(apic_version[boot_cpu_physical_apicid]))
+ return;
/*
* This is broken; anything with a real cpu count has to
* circumvent this idiocy regardless.
mp_ioapics[apic].mpc_apicid = reg_00.bits.ID;
}
- /* Don't check I/O APIC IDs for some xAPIC systems. They have
- * no meaning without the serial APIC bus. */
- if (NO_IOAPIC_CHECK)
- continue;
/*
* Sanity check, is the ID really free? Every APIC in a
* system must have a unique ID or we get lots of nice
{
int irq = vector_to_irq(vector);
+ move_native_irq(vector);
ack_edge_ioapic_irq(irq);
}
{
int irq = vector_to_irq(vector);
+ move_native_irq(vector);
end_level_ioapic_irq(irq);
}
unmask_IO_APIC_irq(irq);
}
+#ifdef CONFIG_SMP
static void set_ioapic_affinity_vector (unsigned int vector,
cpumask_t cpu_mask)
{
int irq = vector_to_irq(vector);
+ set_native_irq_info(vector, cpu_mask);
set_ioapic_affinity_irq(irq, cpu_mask);
}
#endif
+#endif
/*
* Level and edge triggered IO-APIC interrupts need different handling,
* edge-triggered handler, without risking IRQ storms and other ugly
* races.
*/
-static struct hw_interrupt_type ioapic_edge_type = {
+static struct hw_interrupt_type ioapic_edge_type __read_mostly = {
.typename = "IO-APIC-edge",
.startup = startup_edge_ioapic,
.shutdown = shutdown_edge_ioapic,
.disable = disable_edge_ioapic,
.ack = ack_edge_ioapic,
.end = end_edge_ioapic,
+#ifdef CONFIG_SMP
.set_affinity = set_ioapic_affinity,
+#endif
};
-static struct hw_interrupt_type ioapic_level_type = {
+static struct hw_interrupt_type ioapic_level_type __read_mostly = {
.typename = "IO-APIC-level",
.startup = startup_level_ioapic,
.shutdown = shutdown_level_ioapic,
.disable = disable_level_ioapic,
.ack = mask_and_ack_level_ioapic,
.end = end_level_ioapic,
+#ifdef CONFIG_SMP
.set_affinity = set_ioapic_affinity,
+#endif
};
static inline void init_IO_APIC_traps(void)
static void end_lapic_irq (unsigned int i) { /* nothing */ }
-static struct hw_interrupt_type lapic_irq_type = {
+static struct hw_interrupt_type lapic_irq_type __read_mostly = {
.typename = "local-APIC-edge",
.startup = NULL, /* startup_irq() not used for IRQ0 */
.shutdown = NULL, /* shutdown_irq() not used for IRQ0 */
*/
static inline void unlock_ExtINT_logic(void)
{
- int pin, i;
+ int apic, pin, i;
struct IO_APIC_route_entry entry0, entry1;
unsigned char save_control, save_freq_select;
unsigned long flags;
- pin = find_isa_irq_pin(8, mp_INT);
+ pin = find_isa_irq_pin(8, mp_INT);
+ apic = find_isa_irq_apic(8, mp_INT);
if (pin == -1)
return;
spin_lock_irqsave(&ioapic_lock, flags);
- *(((int *)&entry0) + 1) = io_apic_read(0, 0x11 + 2 * pin);
- *(((int *)&entry0) + 0) = io_apic_read(0, 0x10 + 2 * pin);
+ *(((int *)&entry0) + 1) = io_apic_read(apic, 0x11 + 2 * pin);
+ *(((int *)&entry0) + 0) = io_apic_read(apic, 0x10 + 2 * pin);
spin_unlock_irqrestore(&ioapic_lock, flags);
- clear_IO_APIC_pin(0, pin);
+ clear_IO_APIC_pin(apic, pin);
memset(&entry1, 0, sizeof(entry1));
entry1.vector = 0;
spin_lock_irqsave(&ioapic_lock, flags);
- io_apic_write(0, 0x11 + 2 * pin, *(((int *)&entry1) + 1));
- io_apic_write(0, 0x10 + 2 * pin, *(((int *)&entry1) + 0));
+ io_apic_write(apic, 0x11 + 2 * pin, *(((int *)&entry1) + 1));
+ io_apic_write(apic, 0x10 + 2 * pin, *(((int *)&entry1) + 0));
spin_unlock_irqrestore(&ioapic_lock, flags);
save_control = CMOS_READ(RTC_CONTROL);
CMOS_WRITE(save_control, RTC_CONTROL);
CMOS_WRITE(save_freq_select, RTC_FREQ_SELECT);
- clear_IO_APIC_pin(0, pin);
+ clear_IO_APIC_pin(apic, pin);
spin_lock_irqsave(&ioapic_lock, flags);
- io_apic_write(0, 0x11 + 2 * pin, *(((int *)&entry0) + 1));
- io_apic_write(0, 0x10 + 2 * pin, *(((int *)&entry0) + 0));
+ io_apic_write(apic, 0x11 + 2 * pin, *(((int *)&entry0) + 1));
+ io_apic_write(apic, 0x10 + 2 * pin, *(((int *)&entry0) + 0));
spin_unlock_irqrestore(&ioapic_lock, flags);
}
+int timer_uses_ioapic_pin_0;
+
/*
* This code may look a bit paranoid, but it's supposed to cooperate with
* a wide range of boards and BIOS bugs. Fortunately only the timer IRQ
*/
static inline void check_timer(void)
{
- int pin1, pin2;
+ int apic1, pin1, apic2, pin2;
int vector;
/*
apic_write_around(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_EXTINT);
init_8259A(1);
timer_ack = 1;
- enable_8259A_irq(0);
+ if (timer_over_8254 > 0)
+ enable_8259A_irq(0);
+
+ pin1 = find_isa_irq_pin(0, mp_INT);
+ apic1 = find_isa_irq_apic(0, mp_INT);
+ pin2 = ioapic_i8259.pin;
+ apic2 = ioapic_i8259.apic;
- pin1 = find_isa_irq_pin(0, mp_INT);
- pin2 = find_isa_irq_pin(0, mp_ExtINT);
+ if (pin1 == 0)
+ timer_uses_ioapic_pin_0 = 1;
- printk(KERN_INFO "..TIMER: vector=0x%02X pin1=%d pin2=%d\n", vector, pin1, pin2);
+ printk(KERN_INFO "..TIMER: vector=0x%02X apic1=%d pin1=%d apic2=%d pin2=%d\n",
+ vector, apic1, pin1, apic2, pin2);
if (pin1 != -1) {
/*
setup_nmi();
enable_8259A_irq(0);
}
+ if (disable_timer_pin_1 > 0)
+ clear_IO_APIC_pin(0, pin1);
return;
}
- clear_IO_APIC_pin(0, pin1);
- printk(KERN_ERR "..MP-BIOS bug: 8254 timer not connected to IO-APIC\n");
+ clear_IO_APIC_pin(apic1, pin1);
+ printk(KERN_ERR "..MP-BIOS bug: 8254 timer not connected to "
+ "IO-APIC\n");
}
printk(KERN_INFO "...trying to set up timer (IRQ0) through the 8259A ... ");
/*
* legacy devices should be connected to IO APIC #0
*/
- setup_ExtINT_IRQ0_pin(pin2, vector);
+ setup_ExtINT_IRQ0_pin(apic2, pin2, vector);
if (timer_irq_works()) {
printk("works.\n");
if (pin1 != -1)
- replace_pin_at_irq(0, 0, pin1, 0, pin2);
+ replace_pin_at_irq(0, apic1, pin1, apic2, pin2);
else
- add_pin_to_irq(0, 0, pin2);
+ add_pin_to_irq(0, apic2, pin2);
if (nmi_watchdog == NMI_IO_APIC) {
setup_nmi();
}
/*
* Cleanup, just in case ...
*/
- clear_IO_APIC_pin(0, pin2);
+ clear_IO_APIC_pin(apic2, pin2);
}
printk(" failed.\n");
print_IO_APIC();
}
+static int __init setup_disable_8254_timer(char *s)
+{
+ timer_over_8254 = -1;
+ return 1;
+}
+static int __init setup_enable_8254_timer(char *s)
+{
+ timer_over_8254 = 2;
+ return 1;
+}
+
+__setup("disable_8254_timer", setup_disable_8254_timer);
+__setup("enable_8254_timer", setup_enable_8254_timer);
+
/*
* Called after all the initialization is done. If we didnt find any
* APIC bugs then we can allow the modify fast path
ACPI-based IOAPIC Configuration
-------------------------------------------------------------------------- */
-#ifdef CONFIG_ACPI_BOOT
+#ifdef CONFIG_ACPI
int __init io_apic_get_unique_id (int ioapic, int apic_id)
{
spin_unlock_irqrestore(&ioapic_lock, flags);
/* Sanity check */
- if (reg_00.bits.ID != apic_id)
- panic("IOAPIC[%d]: Unable change apic_id!\n", ioapic);
+ if (reg_00.bits.ID != apic_id) {
+ printk("IOAPIC[%d]: Unable to change apic_id!\n", ioapic);
+ return -1;
+ }
}
apic_printk(APIC_VERBOSE, KERN_INFO
spin_lock_irqsave(&ioapic_lock, flags);
io_apic_write(ioapic, 0x11+2*pin, *(((int *)&entry)+1));
io_apic_write(ioapic, 0x10+2*pin, *(((int *)&entry)+0));
+ set_native_irq_info(use_pci_vector() ? entry.vector : irq, TARGET_CPUS);
spin_unlock_irqrestore(&ioapic_lock, flags);
return 0;
}
-#endif /*CONFIG_ACPI_BOOT*/
+#endif /* CONFIG_ACPI */
git://git.onelab.eu / linux-2.6.git / blobdiff