--- /dev/null
+/*
+ * linux/arch/i386/kernel/irq.c
+ *
+ * Copyright (C) 1992, 1998 Linus Torvalds, Ingo Molnar
+ *
+ * This file contains the lowest level x86-specific interrupt
+ * entry, irq-stacks and irq statistics code. All the remaining
+ * irq logic is done by the generic kernel/irq/ code and
+ * by the x86-specific irq controller code. (e.g. i8259.c and
+ * io_apic.c.)
+ */
+
+#include <asm/uaccess.h>
+#include <linux/module.h>
+#include <linux/seq_file.h>
+#include <linux/interrupt.h>
+#include <linux/kernel_stat.h>
+#include <linux/notifier.h>
+#include <linux/cpu.h>
+#include <linux/delay.h>
+
+DEFINE_PER_CPU(irq_cpustat_t, irq_stat) ____cacheline_internodealigned_in_smp;
+EXPORT_PER_CPU_SYMBOL(irq_stat);
+
+#ifndef CONFIG_X86_LOCAL_APIC
+/*
+ * 'what should we do if we get a hw irq event on an illegal vector'.
+ * each architecture has to answer this themselves.
+ */
+void ack_bad_irq(unsigned int irq)
+{
+ printk("unexpected IRQ trap at vector %02x\n", irq);
+}
+#endif
+
+#ifdef CONFIG_4KSTACKS
+/*
+ * per-CPU IRQ handling contexts (thread information and stack)
+ */
+union irq_ctx {
+ struct thread_info tinfo;
+ u32 stack[THREAD_SIZE/sizeof(u32)];
+};
+
+static union irq_ctx *hardirq_ctx[NR_CPUS];
+static union irq_ctx *softirq_ctx[NR_CPUS];
+#endif
+
+/*
+ * do_IRQ handles all normal device IRQ's (the special
+ * SMP cross-CPU interrupts have their own specific
+ * handlers).
+ */
+fastcall unsigned int do_IRQ(struct pt_regs *regs)
+{
+ /* high bit used in ret_from_ code */
+ int irq = ~regs->orig_eax;
+#ifdef CONFIG_4KSTACKS
+ union irq_ctx *curctx, *irqctx;
+ u32 *isp;
+#endif
+
+ irq_enter();
+#ifdef CONFIG_DEBUG_STACKOVERFLOW
+ /* Debugging check for stack overflow: is there less than 1KB free? */
+ {
+ long esp;
+
+ __asm__ __volatile__("andl %%esp,%0" :
+ "=r" (esp) : "0" (THREAD_SIZE - 1));
+ if (unlikely(esp < (sizeof(struct thread_info) + STACK_WARN))) {
+ printk("do_IRQ: stack overflow: %ld\n",
+ esp - sizeof(struct thread_info));
+ dump_stack();
+ }
+ }
+#endif
+
+#ifdef CONFIG_4KSTACKS
+
+ curctx = (union irq_ctx *) current_thread_info();
+ irqctx = hardirq_ctx[smp_processor_id()];
+
+ /*
+ * this is where we switch to the IRQ stack. However, if we are
+ * already using the IRQ stack (because we interrupted a hardirq
+ * handler) we can't do that and just have to keep using the
+ * current stack (which is the irq stack already after all)
+ */
+ if (curctx != irqctx) {
+ int arg1, arg2, ebx;
+
+ /* build the stack frame on the IRQ stack */
+ isp = (u32*) ((char*)irqctx + sizeof(*irqctx));
+ irqctx->tinfo.task = curctx->tinfo.task;
+ irqctx->tinfo.previous_esp = current_stack_pointer;
+
+ asm volatile(
+ " xchgl %%ebx,%%esp \n"
+ " call __do_IRQ \n"
+ " movl %%ebx,%%esp \n"
+ : "=a" (arg1), "=d" (arg2), "=b" (ebx)
+ : "0" (irq), "1" (regs), "2" (isp)
+ : "memory", "cc", "ecx"
+ );
+ } else
+#endif
+ __do_IRQ(irq, regs);
+
+ irq_exit();
+
+ return 1;
+}
+
+#ifdef CONFIG_4KSTACKS
+
+/*
+ * These should really be __section__(".bss.page_aligned") as well, but
+ * gcc's 3.0 and earlier don't handle that correctly.
+ */
+static char softirq_stack[NR_CPUS * THREAD_SIZE]
+ __attribute__((__aligned__(THREAD_SIZE)));
+
+static char hardirq_stack[NR_CPUS * THREAD_SIZE]
+ __attribute__((__aligned__(THREAD_SIZE)));
+
+/*
+ * allocate per-cpu stacks for hardirq and for softirq processing
+ */
+void irq_ctx_init(int cpu)
+{
+ union irq_ctx *irqctx;
+
+ if (hardirq_ctx[cpu])
+ return;
+
+ irqctx = (union irq_ctx*) &hardirq_stack[cpu*THREAD_SIZE];
+ irqctx->tinfo.task = NULL;
+ irqctx->tinfo.exec_domain = NULL;
+ irqctx->tinfo.cpu = cpu;
+ irqctx->tinfo.preempt_count = HARDIRQ_OFFSET;
+ irqctx->tinfo.addr_limit = MAKE_MM_SEG(0);
+
+ hardirq_ctx[cpu] = irqctx;
+
+ irqctx = (union irq_ctx*) &softirq_stack[cpu*THREAD_SIZE];
+ irqctx->tinfo.task = NULL;
+ irqctx->tinfo.exec_domain = NULL;
+ irqctx->tinfo.cpu = cpu;
+ irqctx->tinfo.preempt_count = SOFTIRQ_OFFSET;
+ irqctx->tinfo.addr_limit = MAKE_MM_SEG(0);
+
+ softirq_ctx[cpu] = irqctx;
+
+ printk("CPU %u irqstacks, hard=%p soft=%p\n",
+ cpu,hardirq_ctx[cpu],softirq_ctx[cpu]);
+}
+
+void irq_ctx_exit(int cpu)
+{
+ hardirq_ctx[cpu] = NULL;
+}
+
+extern asmlinkage void __do_softirq(void);
+
+asmlinkage void do_softirq(void)
+{
+ unsigned long flags;
+ struct thread_info *curctx;
+ union irq_ctx *irqctx;
+ u32 *isp;
+
+ if (in_interrupt())
+ return;
+
+ local_irq_save(flags);
+
+ if (local_softirq_pending()) {
+ curctx = current_thread_info();
+ irqctx = softirq_ctx[smp_processor_id()];
+ irqctx->tinfo.task = curctx->task;
+ irqctx->tinfo.previous_esp = current_stack_pointer;
+
+ /* build the stack frame on the softirq stack */
+ isp = (u32*) ((char*)irqctx + sizeof(*irqctx));
+
+ asm volatile(
+ " xchgl %%ebx,%%esp \n"
+ " call __do_softirq \n"
+ " movl %%ebx,%%esp \n"
+ : "=b"(isp)
+ : "0"(isp)
+ : "memory", "cc", "edx", "ecx", "eax"
+ );
+ }
+
+ local_irq_restore(flags);
+}
+
+EXPORT_SYMBOL(do_softirq);
+#endif
+
+/*
+ * Interrupt statistics:
+ */
+
+atomic_t irq_err_count;
+
+/*
+ * /proc/interrupts printing:
+ */
+
+int show_interrupts(struct seq_file *p, void *v)
+{
+ int i = *(loff_t *) v, j;
+ struct irqaction * action;
+ unsigned long flags;
+
+ if (i == 0) {
+ seq_printf(p, " ");
+ for_each_online_cpu(j)
+ seq_printf(p, "CPU%d ",j);
+ seq_putc(p, '\n');
+ }
+
+ if (i < NR_IRQS) {
+ spin_lock_irqsave(&irq_desc[i].lock, flags);
+ action = irq_desc[i].action;
+ if (!action)
+ goto skip;
+ seq_printf(p, "%3d: ",i);
+#ifndef CONFIG_SMP
+ seq_printf(p, "%10u ", kstat_irqs(i));
+#else
+ for_each_online_cpu(j)
+ seq_printf(p, "%10u ", kstat_cpu(j).irqs[i]);
+#endif
+ seq_printf(p, " %14s", irq_desc[i].handler->typename);
+ seq_printf(p, " %s", action->name);
+
+ for (action=action->next; action; action = action->next)
+ seq_printf(p, ", %s", action->name);
+
+ seq_putc(p, '\n');
+skip:
+ spin_unlock_irqrestore(&irq_desc[i].lock, flags);
+ } else if (i == NR_IRQS) {
+ seq_printf(p, "NMI: ");
+ for_each_online_cpu(j)
+ seq_printf(p, "%10u ", nmi_count(j));
+ seq_putc(p, '\n');
+#ifdef CONFIG_X86_LOCAL_APIC
+ seq_printf(p, "LOC: ");
+ for_each_online_cpu(j)
+ seq_printf(p, "%10u ",
+ per_cpu(irq_stat,j).apic_timer_irqs);
+ seq_putc(p, '\n');
+#endif
+ seq_printf(p, "ERR: %10u\n", atomic_read(&irq_err_count));
+#if defined(CONFIG_X86_IO_APIC)
+ seq_printf(p, "MIS: %10u\n", atomic_read(&irq_mis_count));
+#endif
+ }
+ return 0;
+}
+
+#ifdef CONFIG_HOTPLUG_CPU
+
+void fixup_irqs(cpumask_t map)
+{
+ unsigned int irq;
+ static int warned;
+
+ for (irq = 0; irq < NR_IRQS; irq++) {
+ cpumask_t mask;
+ if (irq == 2)
+ continue;
+
+ cpus_and(mask, irq_affinity[irq], map);
+ if (any_online_cpu(mask) == NR_CPUS) {
+ /*printk("Breaking affinity for irq %i\n", irq);*/
+ mask = map;
+ }
+ if (irq_desc[irq].handler->set_affinity)
+ irq_desc[irq].handler->set_affinity(irq, mask);
+ else if (irq_desc[irq].action && !(warned++))
+ printk("Cannot set affinity for irq %i\n", irq);
+ }
+
+#if 0
+ barrier();
+ /* Ingo Molnar says: "after the IO-APIC masks have been redirected
+ [note the nop - the interrupt-enable boundary on x86 is two
+ instructions from sti] - to flush out pending hardirqs and
+ IPIs. After this point nothing is supposed to reach this CPU." */
+ __asm__ __volatile__("sti; nop; cli");
+ barrier();
+#else
+ /* That doesn't seem sufficient. Give it 1ms. */
+ local_irq_enable();
+ mdelay(1);
+ local_irq_disable();
+#endif
+}
+#endif
+
git://git.onelab.eu / linux-2.6.git / blobdiff