#include <linux/init.h>
#include <linux/acpi.h>
#include <linux/delay.h>
-#include <linux/config.h>
#include <linux/bootmem.h>
#include <linux/smp_lock.h>
#include <linux/kernel_stat.h>
#include <asm/io_apic.h>
#include <mach_apic.h>
+#include <mach_apicdef.h>
#include <mach_mpparse.h>
#include <bios_ebda.h>
/* Have we found an MP table */
int smp_found_config;
-unsigned int __initdata maxcpus = NR_CPUS;
-
-#ifdef CONFIG_HOTPLUG_CPU
-#define CPU_HOTPLUG_ENABLED (1)
-#else
-#define CPU_HOTPLUG_ENABLED (0)
-#endif
+unsigned int __cpuinitdata maxcpus = NR_CPUS;
/*
* Various Linux-internal data structures created from the
/* Processor that is doing the boot up */
unsigned int boot_cpu_physical_apicid = -1U;
/* Internal processor count */
-static unsigned int __devinitdata num_processors;
+unsigned int __cpuinitdata num_processors;
/* Bitmask of physically existing CPUs */
physid_mask_t phys_cpu_present_map;
*/
static int mpc_record;
-static struct mpc_config_translation *translation_table[MAX_MPC_ENTRY] __initdata;
+static struct mpc_config_translation *translation_table[MAX_MPC_ENTRY] __cpuinitdata;
-#ifdef CONFIG_X86_NUMAQ
-static int MP_valid_apicid(int apicid, int version)
-{
- return hweight_long(apicid & 0xf) == 1 && (apicid >> 4) != 0xf;
-}
-#else
-static int MP_valid_apicid(int apicid, int version)
-{
- if (version >= 0x14)
- return apicid < 0xff;
- else
- return apicid < 0xf;
-}
-#endif
-
-static void __devinit MP_processor_info (struct mpc_config_processor *m)
+static void __cpuinit MP_processor_info (struct mpc_config_processor *m)
{
+#ifndef CONFIG_XEN
int ver, apicid;
physid_mask_t phys_cpu;
ver = m->mpc_apicver;
- if (!MP_valid_apicid(apicid, ver)) {
- printk(KERN_WARNING "Processor #%d INVALID. (Max ID: %d).\n",
- m->mpc_apicid, MAX_APICS);
- return;
- }
-
/*
* Validate version
*/
}
cpu_set(num_processors, cpu_possible_map);
+#endif /* CONFIG_XEN */
num_processors++;
-
- if (CPU_HOTPLUG_ENABLED || (num_processors > 8)) {
+#ifndef CONFIG_XEN
+ /*
+ * Would be preferable to switch to bigsmp when CONFIG_HOTPLUG_CPU=y
+ * but we need to work other dependencies like SMP_SUSPEND etc
+ * before this can be done without some confusion.
+ * if (CPU_HOTPLUG_ENABLED || num_processors > 8)
+ * - Ashok Raj <ashok.raj@intel.com>
+ */
+ if (num_processors > 8) {
switch (boot_cpu_data.x86_vendor) {
case X86_VENDOR_INTEL:
if (!APIC_XAPIC(ver)) {
}
}
bios_cpu_apicid[num_processors - 1] = m->mpc_apicid;
+#endif /* CONFIG_XEN */
}
static void __init MP_bus_info (struct mpc_config_bus *m)
mpc_oem_bus_info(m, str, translation_table[mpc_record]);
+#if MAX_MP_BUSSES < 256
+ if (m->mpc_busid >= MAX_MP_BUSSES) {
+ printk(KERN_WARNING "MP table busid value (%d) for bustype %s "
+ " is too large, max. supported is %d\n",
+ m->mpc_busid, str, MAX_MP_BUSSES - 1);
+ return;
+ }
+#endif
+
if (strncmp(str, BUSTYPE_ISA, sizeof(BUSTYPE_ISA)-1) == 0) {
mp_bus_id_to_type[m->mpc_busid] = MP_BUS_ISA;
} else if (strncmp(str, BUSTYPE_EISA, sizeof(BUSTYPE_EISA)-1) == 0) {
mp_current_pci_id++;
} else if (strncmp(str, BUSTYPE_MCA, sizeof(BUSTYPE_MCA)-1) == 0) {
mp_bus_id_to_type[m->mpc_busid] = MP_BUS_MCA;
- } else if (strncmp(str, BUSTYPE_NEC98, sizeof(BUSTYPE_NEC98)-1) == 0) {
- mp_bus_id_to_type[m->mpc_busid] = MP_BUS_NEC98;
} else {
printk(KERN_WARNING "Unknown bustype %s - ignoring\n", str);
}
m->mpc_irqtype, m->mpc_irqflag & 3,
(m->mpc_irqflag >> 2) &3, m->mpc_srcbusid,
m->mpc_srcbusirq, m->mpc_destapic, m->mpc_destapiclint);
- /*
- * Well it seems all SMP boards in existence
- * use ExtINT/LVT1 == LINT0 and
- * NMI/LVT2 == LINT1 - the following check
- * will show us if this assumptions is false.
- * Until then we do not have to add baggage.
- */
- if ((m->mpc_irqtype == mp_ExtINT) &&
- (m->mpc_destapiclint != 0))
- BUG();
- if ((m->mpc_irqtype == mp_NMI) &&
- (m->mpc_destapiclint != 1))
- BUG();
}
#ifdef CONFIG_X86_NUMAQ
* Read the physical hardware table. Anything here will
* override the defaults.
*/
+#ifdef CONFIG_XEN
+ if (!smp_read_mpc(isa_bus_to_virt(mpf->mpf_physptr))) {
+#else
if (!smp_read_mpc(phys_to_virt(mpf->mpf_physptr))) {
+#endif
smp_found_config = 0;
printk(KERN_ERR "BIOS bug, MP table errors detected!...\n");
printk(KERN_ERR "... disabling SMP support. (tell your hw vendor)\n");
static int __init smp_scan_config (unsigned long base, unsigned long length)
{
+#ifdef CONFIG_XEN
+ unsigned long *bp = isa_bus_to_virt(base);
+#else
unsigned long *bp = phys_to_virt(base);
+#endif
struct intel_mp_floating *mpf;
Dprintk("Scan SMP from %p for %ld bytes.\n", bp,length);
|| (mpf->mpf_specification == 4)) ) {
smp_found_config = 1;
+#ifndef CONFIG_XEN
printk(KERN_INFO "found SMP MP-table at %08lx\n",
virt_to_phys(mpf));
reserve_bootmem(virt_to_phys(mpf), PAGE_SIZE);
size = end - mpf->mpf_physptr;
reserve_bootmem(mpf->mpf_physptr, size);
}
+#else
+ printk(KERN_INFO "found SMP MP-table at %08lx\n",
+ ((unsigned long)bp - (unsigned long)isa_bus_to_virt(base)) + base);
+#endif
mpf_found = mpf;
return 1;
void __init find_smp_config (void)
{
+#ifndef CONFIG_XEN
unsigned int address;
+#endif
/*
* FIXME: Linux assumes you have 640K of base ram..
* MP1.4 SPEC states to only scan first 1K of 4K EBDA.
*/
+#ifndef CONFIG_XEN
address = get_bios_ebda();
if (address)
smp_scan_config(address, 0x400);
+#endif
}
+int es7000_plat;
+
/* --------------------------------------------------------------------------
ACPI-based MP Configuration
-------------------------------------------------------------------------- */
#ifdef CONFIG_ACPI
-void __init mp_register_lapic_address (
- u64 address)
+void __init mp_register_lapic_address(u64 address)
{
+#ifndef CONFIG_XEN
mp_lapic_addr = (unsigned long) address;
set_fixmap_nocache(FIX_APIC_BASE, mp_lapic_addr);
boot_cpu_physical_apicid = GET_APIC_ID(apic_read(APIC_ID));
Dprintk("Boot CPU = %d\n", boot_cpu_physical_apicid);
+#endif
}
-
-void __devinit mp_register_lapic (
- u8 id,
- u8 enabled)
+void __cpuinit mp_register_lapic (u8 id, u8 enabled)
{
struct mpc_config_processor processor;
- int boot_cpu = 0;
+ int boot_cpu = 0;
if (MAX_APICS - id <= 0) {
printk(KERN_WARNING "Processor #%d invalid (max %d)\n",
if (id == boot_cpu_physical_apicid)
boot_cpu = 1;
+#ifndef CONFIG_XEN
processor.mpc_type = MP_PROCESSOR;
processor.mpc_apicid = id;
processor.mpc_apicver = GET_APIC_VERSION(apic_read(APIC_LVR));
processor.mpc_featureflag = boot_cpu_data.x86_capability[0];
processor.mpc_reserved[0] = 0;
processor.mpc_reserved[1] = 0;
+#endif
MP_processor_info(&processor);
}
u32 pin_programmed[4];
} mp_ioapic_routing[MAX_IO_APICS];
-
-static int mp_find_ioapic (
- int gsi)
+static int mp_find_ioapic (int gsi)
{
- int i = 0;
+ int i = 0;
/* Find the IOAPIC that manages this GSI. */
for (i = 0; i < nr_ioapics; i++) {
return -1;
}
-
-void __init mp_register_ioapic (
- u8 id,
- u32 address,
- u32 gsi_base)
+void __init mp_register_ioapic(u8 id, u32 address, u32 gsi_base)
{
- int idx = 0;
- int tmpid;
+ int idx = 0;
+ int tmpid;
if (nr_ioapics >= MAX_IO_APICS) {
printk(KERN_ERR "ERROR: Max # of I/O APICs (%d) exceeded "
mp_ioapics[idx].mpc_flags = MPC_APIC_USABLE;
mp_ioapics[idx].mpc_apicaddr = address;
+#ifndef CONFIG_XEN
set_fixmap_nocache(FIX_IO_APIC_BASE_0 + idx, address);
- if ((boot_cpu_data.x86_vendor == X86_VENDOR_INTEL) && (boot_cpu_data.x86 < 15))
+#endif
+ if ((boot_cpu_data.x86_vendor == X86_VENDOR_INTEL)
+ && !APIC_XAPIC(apic_version[boot_cpu_physical_apicid]))
tmpid = io_apic_get_unique_id(idx, id);
else
tmpid = id;
mp_ioapics[idx].mpc_apicver, mp_ioapics[idx].mpc_apicaddr,
mp_ioapic_routing[idx].gsi_base,
mp_ioapic_routing[idx].gsi_end);
-
- return;
}
-
-void __init mp_override_legacy_irq (
- u8 bus_irq,
- u8 polarity,
- u8 trigger,
- u32 gsi)
+void __init
+mp_override_legacy_irq(u8 bus_irq, u8 polarity, u8 trigger, u32 gsi)
{
struct mpc_config_intsrc intsrc;
int ioapic = -1;
mp_irqs[mp_irq_entries] = intsrc;
if (++mp_irq_entries == MAX_IRQ_SOURCES)
panic("Max # of irq sources exceeded!\n");
-
- return;
}
-int es7000_plat;
-
void __init mp_config_acpi_legacy_irqs (void)
{
struct mpc_config_intsrc intsrc;
- int i = 0;
- int ioapic = -1;
+ int i = 0;
+ int ioapic = -1;
/*
* Fabricate the legacy ISA bus (bus #31).
#define MAX_GSI_NUM 4096
-int mp_register_gsi (u32 gsi, int triggering, int polarity)
+int mp_register_gsi(u32 gsi, int triggering, int polarity)
{
- int ioapic = -1;
- int ioapic_pin = 0;
- int idx, bit = 0;
- static int pci_irq = 16;
+ int ioapic = -1;
+ int ioapic_pin = 0;
+ int idx, bit = 0;
+ static int pci_irq = 16;
/*
* Mapping between Global System Interrups, which
* represent all possible interrupts, and IRQs
*/
int irq = gsi;
if (gsi < MAX_GSI_NUM) {
- if (gsi > 15)
+ /*
+ * Retain the VIA chipset work-around (gsi > 15), but
+ * avoid a problem where the 8254 timer (IRQ0) is setup
+ * via an override (so it's not on pin 0 of the ioapic),
+ * and at the same time, the pin 0 interrupt is a PCI
+ * type. The gsi > 15 test could cause these two pins
+ * to be shared as IRQ0, and they are not shareable.
+ * So test for this condition, and if necessary, avoid
+ * the pin collision.
+ */
+ if (gsi > 15 || (gsi == 0 && !timer_uses_ioapic_pin_0))
gsi = pci_irq++;
/*
* Don't assign IRQ used by ACPI SCI
git://git.onelab.eu / linux-2.6.git / blobdiff