* This file provides all the same external entries as smp.c but uses
* the voyager hal to provide the functionality
*/
-#include <linux/config.h>
#include <linux/module.h>
#include <linux/mm.h>
#include <linux/kernel_stat.h>
#include <asm/pgalloc.h>
#include <asm/tlbflush.h>
#include <asm/arch_hooks.h>
+#include <asm/pda.h>
/* TLB state -- visible externally, indexed physically */
DEFINE_PER_CPU(struct tlb_state, cpu_tlbstate) ____cacheline_aligned = { &init_mm, 0 };
static void ack_special_QIC_CPI(__u8 cpi);
static void ack_VIC_CPI(__u8 cpi);
static void send_CPI_allbutself(__u8 cpi);
-static void enable_vic_irq(unsigned int irq);
-static void disable_vic_irq(unsigned int irq);
+static void mask_vic_irq(unsigned int irq);
+static void unmask_vic_irq(unsigned int irq);
static unsigned int startup_vic_irq(unsigned int irq);
static void enable_local_vic_irq(unsigned int irq);
static void disable_local_vic_irq(unsigned int irq);
static void do_quad_bootstrap(void);
int hard_smp_processor_id(void);
+int safe_smp_processor_id(void);
/* Inline functions */
static inline void
}
static inline void
-wrapper_smp_local_timer_interrupt(struct pt_regs *regs)
+wrapper_smp_local_timer_interrupt(void)
{
irq_enter();
- smp_local_timer_interrupt(regs);
+ smp_local_timer_interrupt();
irq_exit();
}
/* The VIC IRQ descriptors -- these look almost identical to the
* 8259 IRQs except that masks and things must be kept per processor
*/
-static struct hw_interrupt_type vic_irq_type = {
- .typename = "VIC-level",
- .startup = startup_vic_irq,
- .shutdown = disable_vic_irq,
- .enable = enable_vic_irq,
- .disable = disable_vic_irq,
- .ack = before_handle_vic_irq,
- .end = after_handle_vic_irq,
- .set_affinity = set_vic_irq_affinity,
+static struct irq_chip vic_chip = {
+ .name = "VIC",
+ .startup = startup_vic_irq,
+ .mask = mask_vic_irq,
+ .unmask = unmask_vic_irq,
+ .set_affinity = set_vic_irq_affinity,
};
/* used to count up as CPUs are brought on line (starts at 0) */
VOYAGER_SUS_IN_CONTROL_PORT);
current_thread_info()->cpu = boot_cpu_id;
+ write_pda(cpu_number, boot_cpu_id);
}
/*
/* external functions not defined in the headers */
extern void calibrate_delay(void);
- cpu_init();
+ secondary_cpu_init();
/* OK, we're in the routine */
ack_CPI(VIC_CPU_BOOT_CPI);
/* init_tasks (in sched.c) is indexed logically */
stack_start.esp = (void *) idle->thread.esp;
+ /* Pre-allocate and initialize the CPU's GDT and PDA so it
+ doesn't have to do any memory allocation during the
+ delicate CPU-bringup phase. */
+ if (!init_gdt(cpu, idle)) {
+ printk(KERN_INFO "Couldn't allocate GDT/PDA for CPU %d\n", cpu);
+ cpucount--;
+ return;
+ }
+
irq_ctx_init(cpu);
/* Note: Don't modify initial ss override */
print_cpu_info(&cpu_data[cpu]);
wmb();
cpu_set(cpu, cpu_callout_map);
+ cpu_set(cpu, cpu_present_map);
}
else {
printk("CPU%d FAILED TO BOOT: ", cpu);
set_current(hard_get_current());
#endif
+ /*
+ * switch to the per CPU GDT we already set up
+ * in do_boot_cpu()
+ */
+ cpu_set_gdt(current_thread_info()->cpu);
+
/*
* We don't actually need to load the full TSS,
* basically just the stack pointer and the eip.
smp_vic_sys_interrupt(struct pt_regs *regs)
{
ack_CPI(VIC_SYS_INT);
- printk("Voyager SYSTEM INTERRUPT\n");
+ printk("Voyager SYSTEM INTERRUPT\n");
}
/* Handle a voyager CMN_INT; These interrupts occur either because of
fastcall void
smp_apic_timer_interrupt(struct pt_regs *regs)
{
- wrapper_smp_local_timer_interrupt(regs);
+ struct pt_regs *old_regs = set_irq_regs(regs);
+ wrapper_smp_local_timer_interrupt();
+ set_irq_regs(old_regs);
}
/* All of the QUAD interrupt GATES */
fastcall void
smp_qic_timer_interrupt(struct pt_regs *regs)
{
+ struct pt_regs *old_regs = set_irq_regs(regs);
ack_QIC_CPI(QIC_TIMER_CPI);
- wrapper_smp_local_timer_interrupt(regs);
+ wrapper_smp_local_timer_interrupt();
+ set_irq_regs(old_regs);
}
fastcall void
fastcall void
smp_vic_cpi_interrupt(struct pt_regs *regs)
{
+ struct pt_regs *old_regs = set_irq_regs(regs);
__u8 cpu = smp_processor_id();
if(is_cpu_quad())
ack_VIC_CPI(VIC_CPI_LEVEL0);
if(test_and_clear_bit(VIC_TIMER_CPI, &vic_cpi_mailbox[cpu]))
- wrapper_smp_local_timer_interrupt(regs);
+ wrapper_smp_local_timer_interrupt();
if(test_and_clear_bit(VIC_INVALIDATE_CPI, &vic_cpi_mailbox[cpu]))
smp_invalidate_interrupt();
if(test_and_clear_bit(VIC_RESCHEDULE_CPI, &vic_cpi_mailbox[cpu]))
smp_enable_irq_interrupt();
if(test_and_clear_bit(VIC_CALL_FUNCTION_CPI, &vic_cpi_mailbox[cpu]))
smp_call_function_interrupt();
+ set_irq_regs(old_regs);
}
static void
return 0;
}
+int
+safe_smp_processor_id(void)
+{
+ return hard_smp_processor_id();
+}
+
/* broadcast a halt to all other CPUs */
void
smp_send_stop(void)
/* this function is triggered in time.c when a clock tick fires
* we need to re-broadcast the tick to all CPUs */
void
-smp_vic_timer_interrupt(struct pt_regs *regs)
+smp_vic_timer_interrupt(void)
{
send_CPI_allbutself(VIC_TIMER_CPI);
- smp_local_timer_interrupt(regs);
+ smp_local_timer_interrupt();
}
/* local (per CPU) timer interrupt. It does both profiling and
* value into /proc/profile.
*/
void
-smp_local_timer_interrupt(struct pt_regs * regs)
+smp_local_timer_interrupt(void)
{
int cpu = smp_processor_id();
long weight;
- profile_tick(CPU_PROFILING, regs);
+ profile_tick(CPU_PROFILING);
if (--per_cpu(prof_counter, cpu) <= 0) {
/*
* The multiplier may have changed since the last time we got
per_cpu(prof_counter, cpu);
}
- update_process_times(user_mode_vm(regs));
+ update_process_times(user_mode_vm(get_irq_regs()));
}
if( ((1<<cpu) & voyager_extended_vic_processors) == 0)
return 0;
}
+/* This is a bit of a mess, but forced on us by the genirq changes
+ * there's no genirq handler that really does what voyager wants
+ * so hack it up with the simple IRQ handler */
+static void fastcall
+handle_vic_irq(unsigned int irq, struct irq_desc *desc)
+{
+ before_handle_vic_irq(irq);
+ handle_simple_irq(irq, desc);
+ after_handle_vic_irq(irq);
+}
+
/* The CPIs are handled in the per cpu 8259s, so they must be
* enabled to be received: FIX: enabling the CPIs in the early
* This is for later: first 16 correspond to PC IRQs; next 16
* are Primary MC IRQs and final 16 are Secondary MC IRQs */
for(i = 0; i < 48; i++)
- irq_desc[i].handler = &vic_irq_type;
+ set_irq_chip_and_handler(i, &vic_chip, handle_vic_irq);
}
/* send a CPI at level cpi to a set of cpus in cpuset (set 1 bit per
static unsigned int
startup_vic_irq(unsigned int irq)
{
- enable_vic_irq(irq);
+ unmask_vic_irq(irq);
return 0;
}
* adjust their masks accordingly. */
static void
-enable_vic_irq(unsigned int irq)
+unmask_vic_irq(unsigned int irq)
{
/* linux doesn't to processor-irq affinity, so enable on
* all CPUs we know about */
__u32 processorList = 0;
unsigned long flags;
- VDEBUG(("VOYAGER: enable_vic_irq(%d) CPU%d affinity 0x%lx\n",
+ VDEBUG(("VOYAGER: unmask_vic_irq(%d) CPU%d affinity 0x%lx\n",
irq, cpu, cpu_irq_affinity[cpu]));
spin_lock_irqsave(&vic_irq_lock, flags);
for_each_online_cpu(real_cpu) {
}
static void
-disable_vic_irq(unsigned int irq)
+mask_vic_irq(unsigned int irq)
{
/* lazy disable, do nothing */
}
printk("VOYAGER SMP: CPU%d lost interrupt %d\n",
cpu, irq);
- for_each_cpu(real_cpu, mask) {
+ for_each_possible_cpu(real_cpu, mask) {
outb(VIC_CPU_MASQUERADE_ENABLE | real_cpu,
VIC_PROCESSOR_ID);
* disabled again as it comes in (voyager lazy disable). If
* the affinity map is tightened to disable the interrupt on a
* cpu, it will be pushed off when it comes in */
- enable_vic_irq(irq);
+ unmask_vic_irq(irq);
}
static void
cpu_set(smp_processor_id(), cpu_online_map);
cpu_set(smp_processor_id(), cpu_callout_map);
cpu_set(smp_processor_id(), cpu_possible_map);
+ cpu_set(smp_processor_id(), cpu_present_map);
}
int __devinit
{
zap_low_mappings();
}
+
+void __init
+smp_setup_processor_id(void)
+{
+ current_thread_info()->cpu = hard_smp_processor_id();
+ write_pda(cpu_number, hard_smp_processor_id());
+}
git://git.onelab.eu / linux-2.6.git / blobdiff