* physnode_map[4-7] = 1;
* physnode_map[8- ] = -1;
*/
-s8 physnode_map[MAX_ELEMENTS] = { [0 ... (MAX_ELEMENTS - 1)] = -1};
+u8 physnode_map[MAX_ELEMENTS] = { [0 ... (MAX_ELEMENTS - 1)] = -1};
unsigned long node_start_pfn[MAX_NUMNODES];
unsigned long node_end_pfn[MAX_NUMNODES];
*/
int __init get_memcfg_numa_flat(void)
{
+ int pfn;
+
printk("NUMA - single node, flat memory mode\n");
/* Run the memory configuration and find the top of memory. */
node_start_pfn[0] = 0;
node_end_pfn[0] = max_pfn;
- /* Indicate there is one node available. */
+ /* Fill in the physnode_map with our simplistic memory model,
+ * all memory is in node 0.
+ */
+ for (pfn = node_start_pfn[0]; pfn <= node_end_pfn[0];
+ pfn += PAGES_PER_ELEMENT)
+ {
+ physnode_map[pfn / PAGES_PER_ELEMENT] = 0;
+ }
+
+ /* Indicate there is one node available. */
node_set_online(0);
numnodes = 1;
return 1;
}
/*
- * Allocate memory for the pg_data_t for this node via a crude pre-bootmem
- * method. For node zero take this from the bottom of memory, for
- * subsequent nodes place them at node_remap_start_vaddr which contains
- * node local data in physically node local memory. See setup_memory()
- * for details.
+ * Allocate memory for the pg_data_t via a crude pre-bootmem method
+ * We ought to relocate these onto their own node later on during boot.
*/
static void __init allocate_pgdat(int nid)
{
{
int nid;
unsigned long bootmap_size, system_start_pfn, system_max_low_pfn;
- unsigned long reserve_pages, pfn;
+ unsigned long reserve_pages;
- /*
- * When mapping a NUMA machine we allocate the node_mem_map arrays
- * from node local memory. They are then mapped directly into KVA
- * between zone normal and vmalloc space. Calculate the size of
- * this space and use it to adjust the boundry between ZONE_NORMAL
- * and ZONE_HIGHMEM.
- */
get_memcfg_numa();
-
- /* Fill in the physnode_map */
- for (nid = 0; nid < numnodes; nid++) {
- printk("Node: %d, start_pfn: %ld, end_pfn: %ld\n",
- nid, node_start_pfn[nid], node_end_pfn[nid]);
- printk(" Setting physnode_map array to node %d for pfns:\n ",
- nid);
- for (pfn = node_start_pfn[nid]; pfn < node_end_pfn[nid];
- pfn += PAGES_PER_ELEMENT) {
- physnode_map[pfn / PAGES_PER_ELEMENT] = nid;
- printk("%ld ", pfn);
- }
- printk("\n");
- }
-
reserve_pages = calculate_numa_remap_pages();
/* partially used pages are not usable - thus round upwards */
system_start_pfn = min_low_pfn = PFN_UP(init_pg_tables_end);
find_max_pfn();
- system_max_low_pfn = max_low_pfn = find_max_low_pfn() - reserve_pages;
- printk("reserve_pages = %ld find_max_low_pfn() ~ %ld\n",
- reserve_pages, max_low_pfn + reserve_pages);
- printk("max_pfn = %ld\n", max_pfn);
+ system_max_low_pfn = max_low_pfn = find_max_low_pfn();
#ifdef CONFIG_HIGHMEM
highstart_pfn = highend_pfn = max_pfn;
if (max_pfn > system_max_low_pfn)
printk(KERN_NOTICE "%ldMB HIGHMEM available.\n",
pages_to_mb(highend_pfn - highstart_pfn));
#endif
+ system_max_low_pfn = max_low_pfn = max_low_pfn - reserve_pages;
printk(KERN_NOTICE "%ldMB LOWMEM available.\n",
pages_to_mb(system_max_low_pfn));
printk("min_low_pfn = %ld, max_low_pfn = %ld, highstart_pfn = %ld\n",
(ulong) pfn_to_kaddr(max_low_pfn));
for (nid = 0; nid < numnodes; nid++) {
node_remap_start_vaddr[nid] = pfn_to_kaddr(
- (highstart_pfn + reserve_pages) - node_remap_offset[nid]);
+ highstart_pfn - node_remap_offset[nid]);
allocate_pgdat(nid);
printk ("node %d will remap to vaddr %08lx - %08lx\n", nid,
(ulong) node_remap_start_vaddr[nid],
- (ulong) pfn_to_kaddr(highstart_pfn + reserve_pages
+ (ulong) pfn_to_kaddr(highstart_pfn
- node_remap_offset[nid] + node_remap_size[nid]));
}
printk("High memory starts at vaddr %08lx\n",
(ulong) pfn_to_kaddr(highstart_pfn));
- vmalloc_earlyreserve = reserve_pages * PAGE_SIZE;
for (nid = 0; nid < numnodes; nid++)
find_max_pfn_node(nid);
void __init set_highmem_pages_init(int bad_ppro)
{
#ifdef CONFIG_HIGHMEM
- struct zone *zone;
+ int nid;
- for_each_zone(zone) {
+ for (nid = 0; nid < numnodes; nid++) {
unsigned long node_pfn, node_high_size, zone_start_pfn;
struct page * zone_mem_map;
- if (!is_highmem(zone))
- continue;
-
- printk("Initializing %s for node %d\n", zone->name,
- zone->zone_pgdat->node_id);
-
- node_high_size = zone->spanned_pages;
- zone_mem_map = zone->zone_mem_map;
- zone_start_pfn = zone->zone_start_pfn;
+ node_high_size = NODE_DATA(nid)->node_zones[ZONE_HIGHMEM].spanned_pages;
+ zone_mem_map = NODE_DATA(nid)->node_zones[ZONE_HIGHMEM].zone_mem_map;
+ zone_start_pfn = NODE_DATA(nid)->node_zones[ZONE_HIGHMEM].zone_start_pfn;
+ printk("Initializing highpages for node %d\n", nid);
for (node_pfn = 0; node_pfn < node_high_size; node_pfn++) {
one_highpage_init((struct page *)(zone_mem_map + node_pfn),
zone_start_pfn + node_pfn, bad_ppro);
void __init set_max_mapnr_init(void)
{
#ifdef CONFIG_HIGHMEM
- struct zone *high0 = &NODE_DATA(0)->node_zones[ZONE_HIGHMEM];
- if (high0->spanned_pages > 0)
- highmem_start_page = high0->zone_mem_map;
- else
- highmem_start_page = pfn_to_page(max_low_pfn+1);
+ highmem_start_page = NODE_DATA(0)->node_zones[ZONE_HIGHMEM].zone_mem_map;
num_physpages = highend_pfn;
#else
num_physpages = max_low_pfn;
git://git.onelab.eu / linux-2.6.git / blobdiff