* for more details.
*
* Copyright (C) 2003 Christoph Hellwig (hch@lst.de)
- * Copyright (C) 1999, 2000 Ralf Baechle (ralf@gnu.org)
+ * Copyright (C) 1999, 2000, 04 Ralf Baechle (ralf@linux-mips.org)
* Copyright (C) 1999, 2000 Silicon Graphics, Inc.
*/
#include <linux/init.h>
#include <linux/pci.h>
#include <asm/sn/arch.h>
#include <asm/pci/bridge.h>
-#include <asm/pci_channel.h>
#include <asm/paccess.h>
#include <asm/sn/intr.h>
#include <asm/sn/sn0/hub.h>
+extern unsigned int allocate_irqno(void);
+
/*
* Max #PCI busses we can handle; ie, max #PCI bridges.
*/
else
res = get_dbe(*value, (u32 *) addr);
- return PCIBIOS_SUCCESSFUL;
+ return res ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL;
oh_my_gawd:
return PCIBIOS_SUCCESSFUL;
}
+static int pci_conf1_read_config(struct pci_bus *bus, unsigned int devfn,
+ int where, int size, u32 * value)
+{
+ struct bridge_controller *bc = BRIDGE_CONTROLLER(bus);
+ bridge_t *bridge = bc->base;
+ int busno = bus->number;
+ int slot = PCI_SLOT(devfn);
+ int fn = PCI_FUNC(devfn);
+ volatile void *addr;
+ u32 cf, shift, mask;
+ int res;
+
+ bridge->b_pci_cfg = (busno << 16) | (slot << 11);
+ addr = &bridge->b_type1_cfg.c[(fn << 8) | PCI_VENDOR_ID];
+ if (get_dbe(cf, (u32 *) addr))
+ return PCIBIOS_DEVICE_NOT_FOUND;
+
+ /*
+ * IOC3 is fucked fucked beyond believe ... Don't even give the
+ * generic PCI code a chance to look at it for real ...
+ */
+ if (cf == (PCI_VENDOR_ID_SGI | (PCI_DEVICE_ID_SGI_IOC3 << 16)))
+ goto oh_my_gawd;
+
+ bridge->b_pci_cfg = (busno << 16) | (slot << 11);
+ addr = &bridge->b_type1_cfg.c[(fn << 8) | (where ^ (4 - size))];
+
+ if (size == 1)
+ res = get_dbe(*value, (u8 *) addr);
+ else if (size == 2)
+ res = get_dbe(*value, (u16 *) addr);
+ else
+ res = get_dbe(*value, (u32 *) addr);
+
+ return res ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL;
+
+oh_my_gawd:
+
+ /*
+ * IOC3 is fucked fucked beyond believe ... Don't even give the
+ * generic PCI code a chance to look at the wrong register.
+ */
+ if ((where >= 0x14 && where < 0x40) || (where >= 0x48)) {
+ *value = 0;
+ return PCIBIOS_SUCCESSFUL;
+ }
+
+ /*
+ * IOC3 is fucked fucked beyond believe ... Don't try to access
+ * anything but 32-bit words ...
+ */
+ bridge->b_pci_cfg = (busno << 16) | (slot << 11);
+ addr = &bridge->b_type1_cfg.c[(fn << 8) | where];
+
+ if (get_dbe(cf, (u32 *) addr))
+ return PCIBIOS_DEVICE_NOT_FOUND;
+
+ shift = ((where & 3) << 3);
+ mask = (0xffffffffU >> ((4 - size) << 3));
+ *value = (cf >> shift) & mask;
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static int pci_read_config(struct pci_bus *bus, unsigned int devfn,
+ int where, int size, u32 * value)
+{
+ if (bus->number > 0)
+ return pci_conf1_read_config(bus, devfn, where, size, value);
+
+ return pci_conf0_read_config(bus, devfn, where, size, value);
+}
+
static int pci_conf0_write_config(struct pci_bus *bus, unsigned int devfn,
int where, int size, u32 value)
{
return PCIBIOS_SUCCESSFUL;
}
+static int pci_conf1_write_config(struct pci_bus *bus, unsigned int devfn,
+ int where, int size, u32 value)
+{
+ struct bridge_controller *bc = BRIDGE_CONTROLLER(bus);
+ bridge_t *bridge = bc->base;
+ int slot = PCI_SLOT(devfn);
+ int fn = PCI_FUNC(devfn);
+ int busno = bus->number;
+ volatile void *addr;
+ u32 cf, shift, mask, smask;
+ int res;
+
+ bridge->b_pci_cfg = (busno << 16) | (slot << 11);
+ addr = &bridge->b_type1_cfg.c[(fn << 8) | PCI_VENDOR_ID];
+ if (get_dbe(cf, (u32 *) addr))
+ return PCIBIOS_DEVICE_NOT_FOUND;
+
+ /*
+ * IOC3 is fucked fucked beyond believe ... Don't even give the
+ * generic PCI code a chance to look at it for real ...
+ */
+ if (cf == (PCI_VENDOR_ID_SGI | (PCI_DEVICE_ID_SGI_IOC3 << 16)))
+ goto oh_my_gawd;
+
+ addr = &bridge->b_type1_cfg.c[(fn << 8) | (where ^ (4 - size))];
+
+ if (size == 1) {
+ res = put_dbe(value, (u8 *) addr);
+ } else if (size == 2) {
+ res = put_dbe(value, (u16 *) addr);
+ } else {
+ res = put_dbe(value, (u32 *) addr);
+ }
+
+ if (res)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+
+ return PCIBIOS_SUCCESSFUL;
+
+oh_my_gawd:
+
+ /*
+ * IOC3 is fucked fucked beyond believe ... Don't even give the
+ * generic PCI code a chance to touch the wrong register.
+ */
+ if ((where >= 0x14 && where < 0x40) || (where >= 0x48))
+ return PCIBIOS_SUCCESSFUL;
+
+ /*
+ * IOC3 is fucked fucked beyond believe ... Don't try to access
+ * anything but 32-bit words ...
+ */
+ addr = &bridge->b_type0_cfg_dev[slot].f[fn].l[where >> 2];
+
+ if (get_dbe(cf, (u32 *) addr))
+ return PCIBIOS_DEVICE_NOT_FOUND;
+
+ shift = ((where & 3) << 3);
+ mask = (0xffffffffU >> ((4 - size) << 3));
+ smask = mask << shift;
+
+ cf = (cf & ~smask) | ((value & mask) << shift);
+ if (put_dbe(cf, (u32 *) addr))
+ return PCIBIOS_DEVICE_NOT_FOUND;
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static int pci_write_config(struct pci_bus *bus, unsigned int devfn,
+ int where, int size, u32 value)
+{
+ if (bus->number > 0)
+ return pci_conf1_write_config(bus, devfn, where, size, value);
+
+ return pci_conf0_write_config(bus, devfn, where, size, value);
+}
+
static struct pci_ops bridge_pci_ops = {
- .read = pci_conf0_read_config,
- .write = pci_conf0_write_config,
+ .read = pci_read_config,
+ .write = pci_write_config,
};
int __init bridge_probe(nasid_t nasid, int widget_id, int masterwid)
{
+ unsigned long offset = NODE_OFFSET(nasid);
struct bridge_controller *bc;
- bridge_t *bridge;
static int num_bridges = 0;
+ bridge_t *bridge;
+ int slot;
printk("a bridge\n");
if (!num_bridges)
ioport_resource.end = ~0UL;
- bc = &bridges[num_bridges++];
+ bc = &bridges[num_bridges];
bc->pc.pci_ops = &bridge_pci_ops;
bc->pc.mem_resource = &bc->mem;
bc->pc.io_resource = &bc->io;
+ bc->pc.index = num_bridges;
+
bc->mem.name = "Bridge PCI MEM";
- bc->pc.mem_offset = 0;
+ bc->pc.mem_offset = offset;
bc->mem.start = 0;
bc->mem.end = ~0UL;
bc->mem.flags = IORESOURCE_MEM;
bc->io.name = "Bridge IO MEM";
+ bc->pc.io_offset = offset;
bc->io.start = 0UL;
- bc->pc.io_offset = 0UL;
bc->io.end = ~0UL;
bc->io.flags = IORESOURCE_IO;
/*
* Until otherwise set up, assume all interrupts are from slot 0
*/
- bridge->b_int_device = (u32) 0x0;
+ bridge->b_int_device = 0x0;
/*
* swap pio's to pci mem and io space (big windows)
bridge->b_dir_map = (masterwid << 20); /* DMA */
bridge->b_int_enable = 0;
+ for (slot = 0; slot < 8; slot ++) {
+ bridge->b_device[slot].reg |= BRIDGE_DEV_SWAP_DIR;
+ bc->pci_int[slot] = -1;
+ }
bridge->b_wid_tflush; /* wait until Bridge PIO complete */
bc->base = bridge;
register_pci_controller(&bc->pc);
+
+ num_bridges++;
+
return 0;
}
int __devinit pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
{
struct bridge_controller *bc = BRIDGE_CONTROLLER(dev->bus);
- int irq;
+ int irq = bc->pci_int[slot];
- irq = allocate_irqno();
-
- /*
- * Argh... This API doesn't handle with errors at all ...
- */
if (irq == -1) {
- printk(KERN_ERR "Can't allocate interrupt for PCI device %s\n",
- pci_name(dev));
- return -1;
+ irq = bc->pci_int[slot] = request_bridge_irq(bc);
+ if (irq < 0)
+ panic("Can't allocate interrupt for PCI device %s\n",
+ pci_name(dev));
}
irq_to_bridge[irq] = bc;
return irq;
}
+/* Do platform specific device initialization at pci_enable_device() time */
+int pcibios_plat_dev_init(struct pci_dev *dev)
+{
+ return 0;
+}
+
/*
* Device might live on a subordinate PCI bus. XXX Walk up the chain of buses
* to find the slot number in sense of the bridge device register.
* settings.
*/
-static void __init pci_disable_swapping(struct pci_dev *dev)
+static inline void pci_disable_swapping(struct pci_dev *dev)
{
struct bridge_controller *bc = BRIDGE_CONTROLLER(dev->bus);
bridge_t *bridge = bc->base;
bridge->b_widget.w_tflush; /* Flush */
}
-static void __init pci_enable_swapping(struct pci_dev *dev)
+static inline void pci_enable_swapping(struct pci_dev *dev)
{
struct bridge_controller *bc = BRIDGE_CONTROLLER(dev->bus);
bridge_t *bridge = bc->base;
static void __init pci_fixup_ioc3(struct pci_dev *d)
{
- struct bridge_controller *bc = BRIDGE_CONTROLLER(d->bus);
- unsigned long offset = NODE_OFFSET(bc->nasid);
-
- printk("PCI: Fixing base addresses for IOC3 device %s\n", pci_name(d));
-
- d->resource[0].start |= offset;
- d->resource[0].end |= offset;
-
pci_disable_swapping(d);
}
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SGI, PCI_DEVICE_ID_SGI_IOC3,
- pci_fixup_ioc3);
-
-static void __init pci_fixup_isp1020(struct pci_dev *d)
-{
- struct bridge_controller *bc = BRIDGE_CONTROLLER(d->bus);
- unsigned short command;
-
- d->resource[0].start |= (unsigned long) bc->nasid << 32;
- printk("PCI: Fixing isp1020 in [bus:slot.fn] %s\n", pci_name(d));
-
- /*
- * Configure device to allow bus mastering, i/o and memory mapping.
- * Older qlogicisp driver expects to have the IO space enable
- * bit set. Things stop working if we program the controllers as not
- * having PCI_COMMAND_MEMORY, so we have to fudge the mem_flags.
- */
- pci_set_master(d);
- pci_read_config_word(d, PCI_COMMAND, &command);
- command |= PCI_COMMAND_MEMORY;
- command |= PCI_COMMAND_IO;
- pci_write_config_word(d, PCI_COMMAND, command);
- d->resource[1].flags |= 1;
-
- pci_enable_swapping(d);
-}
-
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP1020,
- pci_fixup_isp1020);
-
-static void __init pci_fixup_isp2x00(struct pci_dev *d)
-{
- struct bridge_controller *bc = BRIDGE_CONTROLLER(d->bus);
- bridge_t *bridge = bc->base;
- bridgereg_t devreg;
- int i;
- int slot = PCI_SLOT(d->devfn);
- unsigned int start;
- unsigned short command;
-
- printk("PCI: Fixing isp2x00 in [bus:slot.fn] %s\n", pci_name(d));
-
- /* set the resource struct for this device */
- start = (u32) (u64) bridge; /* yes, we want to lose the upper 32 bits here */
- start |= BRIDGE_DEVIO(slot);
-
- d->resource[0].start = start;
- d->resource[0].end = d->resource[0].start + 0xff;
- d->resource[0].flags = IORESOURCE_IO;
-
- d->resource[1].start = start;
- d->resource[1].end = d->resource[0].start + 0xfff;
- d->resource[1].flags = IORESOURCE_MEM;
-
- /*
- * set the bridge device(x) reg for this device
- */
- devreg = bridge->b_device[slot].reg;
- /* point device(x) to it appropriate small window */
- devreg &= ~BRIDGE_DEV_OFF_MASK;
- devreg |= (start >> 20) & BRIDGE_DEV_OFF_MASK;
- bridge->b_device[slot].reg = devreg;
-
- pci_enable_swapping(d);
-
- /* set card's base addr reg */
- //pci_write_config_dword(d, PCI_BASE_ADDRESS_0, 0x500001);
- //pci_write_config_dword(d, PCI_BASE_ADDRESS_1, 0x8b00000);
- //pci_write_config_dword(d, PCI_ROM_ADDRESS, 0x8b20000);
-
- /* I got these from booting irix on system... */
- pci_write_config_dword(d, PCI_BASE_ADDRESS_0, 0x200001);
- //pci_write_config_dword(d, PCI_BASE_ADDRESS_1, 0xf800000);
- pci_write_config_dword(d, PCI_ROM_ADDRESS, 0x10200000);
-
- pci_write_config_dword(d, PCI_BASE_ADDRESS_1, start);
- //pci_write_config_dword(d, PCI_ROM_ADDRESS, (start | 0x20000));
-
- /* set cache line size */
- pci_write_config_dword(d, PCI_CACHE_LINE_SIZE, 0xf080);
-
- /* set pci bus timeout */
- bridge->b_bus_timeout |= BRIDGE_BUS_PCI_RETRY_HLD(0x3);
- bridge->b_wid_tflush;
- printk("PCI: bridge bus timeout= 0x%x \n", bridge->b_bus_timeout);
-
- /* set host error field */
- bridge->b_int_host_err = 0x44;
- bridge->b_wid_tflush;
-
- bridge->b_wid_tflush; /* wait until Bridge PIO complete */
- for (i = 0; i < 8; i++)
- printk("PCI: device(%d)= 0x%x\n", i,
- bridge->b_device[i].reg);
-
- /* configure device to allow bus mastering, i/o and memory mapping */
- pci_set_master(d);
- pci_read_config_word(d, PCI_COMMAND, &command);
- command |= PCI_COMMAND_MEMORY;
- command |= PCI_COMMAND_IO;
- pci_write_config_word(d, PCI_COMMAND, command);
- /*d->resource[1].flags |= 1; */
-}
-
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP2100,
- pci_fixup_isp2x00);
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP2200,
- pci_fixup_isp2x00);
+ pci_fixup_ioc3);
git://git.onelab.eu / linux-2.6.git / blobdiff