--- /dev/null
+/*
+ * Device Tree Souce for Buffalo KuroboxHG
+ *
+ * Choose CONFIG_LINKSTATION to build a kernel for KuroboxHG, or use
+ * the default configuration linkstation_defconfig.
+ *
+ * Based on sandpoint.dts
+ *
+ * 2006 (c) G. Liakhovetski <g.liakhovetski@gmx.de>
+ *
+ * This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+
+XXXX add flash parts, rtc, ??
+
+build with: "dtc -f -I dts -O dtb -o kuroboxHG.dtb -V 16 kuroboxHG.dts"
+
+
+ */
+
+/ {
+ linux,phandle = <1000>;
+ model = "KuroboxHG";
+ compatible = "linkstation";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ cpus {
+ linux,phandle = <2000>;
+ #cpus = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ PowerPC,603e { /* Really 8241 */
+ linux,phandle = <2100>;
+ linux,boot-cpu;
+ device_type = "cpu";
+ reg = <0>;
+ clock-frequency = <fdad680>; /* Fixed by bootwrapper */
+ timebase-frequency = <1F04000>; /* Fixed by bootwrapper */
+ bus-frequency = <0>; /* From bootloader */
+ /* Following required by dtc but not used */
+ i-cache-line-size = <0>;
+ d-cache-line-size = <0>;
+ i-cache-size = <4000>;
+ d-cache-size = <4000>;
+ };
+ };
+
+ memory {
+ linux,phandle = <3000>;
+ device_type = "memory";
+ reg = <00000000 08000000>;
+ };
+
+ soc10x { /* AFAICT need to make soc for 8245's uarts to be defined */
+ linux,phandle = <4000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ #interrupt-cells = <2>;
+ device_type = "soc";
+ compatible = "mpc10x";
+ store-gathering = <0>; /* 0 == off, !0 == on */
+ reg = <80000000 00100000>;
+ ranges = <80000000 80000000 70000000 /* pci mem space */
+ fc000000 fc000000 00100000 /* EUMB */
+ fe000000 fe000000 00c00000 /* pci i/o space */
+ fec00000 fec00000 00300000 /* pci cfg regs */
+ fef00000 fef00000 00100000>; /* pci iack */
+
+ i2c@80003000 {
+ linux,phandle = <4300>;
+ device_type = "i2c";
+ compatible = "fsl-i2c";
+ reg = <80003000 1000>;
+ interrupts = <5 2>;
+ interrupt-parent = <4400>;
+ };
+
+ serial@80004500 {
+ linux,phandle = <4511>;
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <80004500 8>;
+ clock-frequency = <7c044a8>;
+ current-speed = <2580>;
+ interrupts = <9 2>;
+ interrupt-parent = <4400>;
+ };
+
+ serial@80004600 {
+ linux,phandle = <4512>;
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <80004600 8>;
+ clock-frequency = <7c044a8>;
+ current-speed = <e100>;
+ interrupts = <a 0>;
+ interrupt-parent = <4400>;
+ };
+
+ pic@80040000 {
+ linux,phandle = <4400>;
+ #interrupt-cells = <2>;
+ #address-cells = <0>;
+ device_type = "open-pic";
+ compatible = "chrp,open-pic";
+ interrupt-controller;
+ reg = <80040000 40000>;
+ built-in;
+ };
+
+ pci@fec00000 {
+ linux,phandle = <4500>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ device_type = "pci";
+ compatible = "mpc10x-pci";
+ reg = <fec00000 400000>;
+ ranges = <01000000 0 0 fe000000 0 00c00000
+ 02000000 0 80000000 80000000 0 70000000>;
+ bus-range = <0 ff>;
+ clock-frequency = <7f28155>;
+ interrupt-parent = <4400>;
+ interrupt-map-mask = <f800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x11 - IRQ0 ETH */
+ 5800 0 0 1 4400 0 1
+ 5800 0 0 2 4400 1 1
+ 5800 0 0 3 4400 2 1
+ 5800 0 0 4 4400 3 1
+ /* IDSEL 0x12 - IRQ1 IDE0 */
+ 6000 0 0 1 4400 1 1
+ 6000 0 0 2 4400 2 1
+ 6000 0 0 3 4400 3 1
+ 6000 0 0 4 4400 0 1
+ /* IDSEL 0x14 - IRQ3 USB2.0 */
+ 7000 0 0 1 4400 3 1
+ 7000 0 0 2 4400 3 1
+ 7000 0 0 3 4400 3 1
+ 7000 0 0 4 4400 3 1
+ >;
+ };
+ };
+};
git://git.onelab.eu / linux-2.6.git / blobdiff