/*
- * arch/ppc/platforms/setup.c
- *
* Copyright (C) 1995 Linus Torvalds
* Adapted from 'alpha' version by Gary Thomas
* Modified by Cort Dougan (cort@cs.nmt.edu)
* bootup setup stuff..
*/
-#include <linux/config.h>
#include <linux/errno.h>
#include <linux/sched.h>
#include <linux/kernel.h>
#include <linux/reboot.h>
#include <linux/init.h>
#include <linux/pci.h>
-#include <linux/version.h>
+#include <linux/utsrelease.h>
#include <linux/adb.h>
#include <linux/module.h>
#include <linux/delay.h>
#include <linux/root_dev.h>
#include <linux/initrd.h>
#include <linux/module.h>
+#include <linux/timer.h>
#include <asm/io.h>
#include <asm/pgtable.h>
int _chrp_type;
EXPORT_SYMBOL(_chrp_type);
-struct mpic *chrp_mpic;
+static struct mpic *chrp_mpic;
+
+/* Used for doing CHRP event-scans */
+DEFINE_PER_CPU(struct timer_list, heartbeat_timer);
+unsigned long event_scan_interval;
/*
* XXX this should be in xmon.h, but putting it there means xmon.h
* has to include <linux/interrupt.h> (to get irqreturn_t), which
* causes all sorts of problems. -- paulus
*/
-extern irqreturn_t xmon_irq(int, void *, struct pt_regs *);
+extern irqreturn_t xmon_irq(int, void *);
extern unsigned long loops_per_jiffy;
+/* To be replaced by RTAS when available */
+static unsigned int *briq_SPOR;
+
#ifdef CONFIG_SMP
extern struct smp_ops_t chrp_smp_ops;
#endif
"Disabled", "Write-Through", "Copy-Back", "Transparent Mode"
};
+static const char *chrp_names[] = {
+ "Unknown",
+ "","","",
+ "Motorola",
+ "IBM or Longtrail",
+ "Genesi Pegasos",
+ "Total Impact Briq"
+};
+
void chrp_show_cpuinfo(struct seq_file *m)
{
int i, sdramen;
/* Enable L2 cache if needed */
np = find_type_devices("cpu");
if (np != NULL) {
- unsigned int *l2cr = (unsigned int *)
- get_property (np, "l2cr", NULL);
+ const unsigned int *l2cr = get_property(np, "l2cr", NULL);
if (l2cr == NULL) {
printk ("Pegasos l2cr : no cpu l2cr property found\n");
return;
}
}
+static void briq_restart(char *cmd)
+{
+ local_irq_disable();
+ if (briq_SPOR)
+ out_be32(briq_SPOR, 0);
+ for(;;);
+}
+
void __init chrp_setup_arch(void)
{
struct device_node *root = find_path_device ("/");
- char *machine = NULL;
- struct device_node *device;
- unsigned int *p = NULL;
+ const char *machine = NULL;
/* init to some ~sane value until calibrate_delay() runs */
loops_per_jiffy = 50000000/HZ;
_chrp_type = _CHRP_IBM;
} else if (machine && strncmp(machine, "MOT", 3) == 0) {
_chrp_type = _CHRP_Motorola;
+ } else if (machine && strncmp(machine, "TotalImpact,BRIQ-1", 18) == 0) {
+ _chrp_type = _CHRP_briq;
+ /* Map the SPOR register on briq and change the restart hook */
+ briq_SPOR = (unsigned int *)ioremap(0xff0000e8, 4);
+ ppc_md.restart = briq_restart;
} else {
/* Let's assume it is an IBM chrp if all else fails */
_chrp_type = _CHRP_IBM;
}
- printk("chrp type = %x\n", _chrp_type);
+ printk("chrp type = %x [%s]\n", _chrp_type, chrp_names[_chrp_type]);
rtas_initialize();
if (rtas_token("display-character") >= 0)
*/
sio_init();
- /* Get the event scan rate for the rtas so we know how
- * often it expects a heartbeat. -- Cort
- */
- device = find_devices("rtas");
- if (device)
- p = (unsigned int *) get_property
- (device, "rtas-event-scan-rate", NULL);
- if (p && *p) {
- ppc_md.heartbeat = chrp_event_scan;
- ppc_md.heartbeat_reset = HZ / (*p * 30) - 1;
- ppc_md.heartbeat_count = 1;
- printk("RTAS Event Scan Rate: %u (%lu jiffies)\n",
- *p, ppc_md.heartbeat_reset);
- }
-
pci_create_OF_bus_map();
/*
}
void
-chrp_event_scan(void)
+chrp_event_scan(unsigned long unused)
{
unsigned char log[1024];
int ret = 0;
/* XXX: we should loop until the hardware says no more error logs -- Cort */
rtas_call(rtas_token("event-scan"), 4, 1, &ret, 0xffffffff, 0,
__pa(log), 1024);
- ppc_md.heartbeat_count = ppc_md.heartbeat_reset;
+ mod_timer(&__get_cpu_var(heartbeat_timer),
+ jiffies + event_scan_interval);
+}
+
+static void chrp_8259_cascade(unsigned int irq, struct irq_desc *desc)
+{
+ unsigned int cascade_irq = i8259_irq();
+ if (cascade_irq != NO_IRQ)
+ generic_handle_irq(cascade_irq);
+ desc->chip->eoi(irq);
}
/*
static void __init chrp_find_openpic(void)
{
struct device_node *np, *root;
- int len, i, j, irq_count;
+ int len, i, j;
int isu_size, idu_size;
- unsigned int *iranges, *opprop = NULL;
+ const unsigned int *iranges, *opprop = NULL;
int oplen = 0;
unsigned long opaddr;
int na = 1;
- unsigned char init_senses[NR_IRQS - NUM_8259_INTERRUPTS];
- np = find_type_devices("open-pic");
+ np = of_find_node_by_type(NULL, "open-pic");
if (np == NULL)
return;
- root = find_path_device("/");
+ root = of_find_node_by_path("/");
if (root) {
- opprop = (unsigned int *) get_property
- (root, "platform-open-pic", &oplen);
+ opprop = get_property(root, "platform-open-pic", &oplen);
na = prom_n_addr_cells(root);
}
if (opprop && oplen >= na * sizeof(unsigned int)) {
oplen /= na * sizeof(unsigned int);
} else {
struct resource r;
- if (of_address_to_resource(np, 0, &r))
- return;
+ if (of_address_to_resource(np, 0, &r)) {
+ goto bail;
+ }
opaddr = r.start;
oplen = 0;
}
printk(KERN_INFO "OpenPIC at %lx\n", opaddr);
- irq_count = NR_IRQS - NUM_ISA_INTERRUPTS - 4; /* leave room for IPIs */
- prom_get_irq_senses(init_senses, NUM_ISA_INTERRUPTS, NR_IRQS - 4);
- /* i8259 cascade is always positive level */
- init_senses[0] = IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE;
-
- iranges = (unsigned int *) get_property(np, "interrupt-ranges", &len);
+ iranges = get_property(np, "interrupt-ranges", &len);
if (iranges == NULL)
len = 0; /* non-distributed mpic */
else
if (len > 1)
isu_size = iranges[3];
- chrp_mpic = mpic_alloc(opaddr, MPIC_PRIMARY,
- isu_size, NUM_ISA_INTERRUPTS, irq_count,
- NR_IRQS - 4, init_senses, irq_count,
- " MPIC ");
+ chrp_mpic = mpic_alloc(np, opaddr, MPIC_PRIMARY,
+ isu_size, 0, " MPIC ");
if (chrp_mpic == NULL) {
printk(KERN_ERR "Failed to allocate MPIC structure\n");
- return;
+ goto bail;
}
-
j = na - 1;
for (i = 1; i < len; ++i) {
iranges += 2;
}
mpic_init(chrp_mpic);
- mpic_setup_cascade(NUM_ISA_INTERRUPTS, i8259_irq_cascade, NULL);
+ ppc_md.get_irq = mpic_get_irq;
+ bail:
+ of_node_put(root);
+ of_node_put(np);
}
#if defined(CONFIG_VT) && defined(CONFIG_INPUT_ADBHID) && defined(XMON)
};
#endif
-void __init chrp_init_IRQ(void)
+static void __init chrp_find_8259(void)
{
- struct device_node *np;
+ struct device_node *np, *pic = NULL;
unsigned long chrp_int_ack = 0;
-#if defined(CONFIG_VT) && defined(CONFIG_INPUT_ADBHID) && defined(XMON)
- struct device_node *kbd;
-#endif
+ unsigned int cascade_irq;
+
+ /* Look for cascade */
+ for_each_node_by_type(np, "interrupt-controller")
+ if (device_is_compatible(np, "chrp,iic")) {
+ pic = np;
+ break;
+ }
+ /* Ok, 8259 wasn't found. We need to handle the case where
+ * we have a pegasos that claims to be chrp but doesn't have
+ * a proper interrupt tree
+ */
+ if (pic == NULL && chrp_mpic != NULL) {
+ printk(KERN_ERR "i8259: Not found in device-tree"
+ " assuming no legacy interrupts\n");
+ return;
+ }
+ /* Look for intack. In a perfect world, we would look for it on
+ * the ISA bus that holds the 8259 but heh... Works that way. If
+ * we ever see a problem, we can try to re-use the pSeries code here.
+ * Also, Pegasos-type platforms don't have a proper node to start
+ * from anyway
+ */
for (np = find_devices("pci"); np != NULL; np = np->next) {
- unsigned int *addrp = (unsigned int *)
- get_property(np, "8259-interrupt-acknowledge", NULL);
+ const unsigned int *addrp = get_property(np,
+ "8259-interrupt-acknowledge", NULL);
if (addrp == NULL)
continue;
break;
}
if (np == NULL)
- printk(KERN_ERR "Cannot find PCI interrupt acknowledge address\n");
+ printk(KERN_WARNING "Cannot find PCI interrupt acknowledge"
+ " address, polling\n");
+
+ i8259_init(pic, chrp_int_ack);
+ if (ppc_md.get_irq == NULL) {
+ ppc_md.get_irq = i8259_irq;
+ irq_set_default_host(i8259_get_host());
+ }
+ if (chrp_mpic != NULL) {
+ cascade_irq = irq_of_parse_and_map(pic, 0);
+ if (cascade_irq == NO_IRQ)
+ printk(KERN_ERR "i8259: failed to map cascade irq\n");
+ else
+ set_irq_chained_handler(cascade_irq,
+ chrp_8259_cascade);
+ }
+}
+void __init chrp_init_IRQ(void)
+{
+#if defined(CONFIG_VT) && defined(CONFIG_INPUT_ADBHID) && defined(XMON)
+ struct device_node *kbd;
+#endif
chrp_find_openpic();
+ chrp_find_8259();
- i8259_init(chrp_int_ack, 0);
+#ifdef CONFIG_SMP
+ /* Pegasos has no MPIC, those ops would make it crash. It might be an
+ * option to move setting them to after we probe the PIC though
+ */
+ if (chrp_mpic != NULL)
+ smp_ops = &chrp_smp_ops;
+#endif /* CONFIG_SMP */
if (_chrp_type == _CHRP_Pegasos)
ppc_md.get_irq = i8259_irq;
- else
- ppc_md.get_irq = mpic_get_irq;
#if defined(CONFIG_VT) && defined(CONFIG_INPUT_ADBHID) && defined(XMON)
/* see if there is a keyboard in the device tree
void __init
chrp_init2(void)
{
+ struct device_node *device;
+ const unsigned int *p = NULL;
+
#ifdef CONFIG_NVRAM
chrp_nvram_init();
#endif
request_region(0x80,0x10,"dma page reg");
request_region(0xc0,0x20,"dma2");
+ /* Get the event scan rate for the rtas so we know how
+ * often it expects a heartbeat. -- Cort
+ */
+ device = find_devices("rtas");
+ if (device)
+ p = get_property(device, "rtas-event-scan-rate", NULL);
+ if (p && *p) {
+ /*
+ * Arrange to call chrp_event_scan at least *p times
+ * per minute. We use 59 rather than 60 here so that
+ * the rate will be slightly higher than the minimum.
+ * This all assumes we don't do hotplug CPU on any
+ * machine that needs the event scans done.
+ */
+ unsigned long interval, offset;
+ int cpu, ncpus;
+ struct timer_list *timer;
+
+ interval = HZ * 59 / *p;
+ offset = HZ;
+ ncpus = num_online_cpus();
+ event_scan_interval = ncpus * interval;
+ for (cpu = 0; cpu < ncpus; ++cpu) {
+ timer = &per_cpu(heartbeat_timer, cpu);
+ setup_timer(timer, chrp_event_scan, 0);
+ timer->expires = jiffies + offset;
+ add_timer_on(timer, cpu);
+ offset += interval;
+ }
+ printk("RTAS Event Scan Rate: %u (%lu jiffies)\n",
+ *p, interval);
+ }
+
if (ppc_md.progress)
ppc_md.progress(" Have fun! ", 0x7777);
}
-void __init chrp_init(void)
+static int __init chrp_probe(void)
{
+ char *dtype = of_get_flat_dt_prop(of_get_flat_dt_root(),
+ "device_type", NULL);
+ if (dtype == NULL)
+ return 0;
+ if (strcmp(dtype, "chrp"))
+ return 0;
+
ISA_DMA_THRESHOLD = ~0L;
DMA_MODE_READ = 0x44;
DMA_MODE_WRITE = 0x48;
- isa_io_base = CHRP_ISA_IO_BASE; /* default value */
- ppc_do_canonicalize_irqs = 1;
-
- /* Assume we have an 8259... */
- __irq_offset_value = NUM_ISA_INTERRUPTS;
-
- ppc_md.setup_arch = chrp_setup_arch;
- ppc_md.show_cpuinfo = chrp_show_cpuinfo;
- ppc_md.init_IRQ = chrp_init_IRQ;
- ppc_md.init = chrp_init2;
-
- ppc_md.phys_mem_access_prot = pci_phys_mem_access_prot;
-
- ppc_md.restart = rtas_restart;
- ppc_md.power_off = rtas_power_off;
- ppc_md.halt = rtas_halt;
-
- ppc_md.time_init = chrp_time_init;
- ppc_md.calibrate_decr = generic_calibrate_decr;
-
- /* this may get overridden with rtas routines later... */
- ppc_md.set_rtc_time = chrp_set_rtc_time;
- ppc_md.get_rtc_time = chrp_get_rtc_time;
-
-#ifdef CONFIG_SMP
- smp_ops = &chrp_smp_ops;
-#endif /* CONFIG_SMP */
+ return 1;
}
+
+define_machine(chrp) {
+ .name = "CHRP",
+ .probe = chrp_probe,
+ .setup_arch = chrp_setup_arch,
+ .init = chrp_init2,
+ .show_cpuinfo = chrp_show_cpuinfo,
+ .init_IRQ = chrp_init_IRQ,
+ .restart = rtas_restart,
+ .power_off = rtas_power_off,
+ .halt = rtas_halt,
+ .time_init = chrp_time_init,
+ .set_rtc_time = chrp_set_rtc_time,
+ .get_rtc_time = chrp_get_rtc_time,
+ .calibrate_decr = generic_calibrate_decr,
+ .phys_mem_access_prot = pci_phys_mem_access_prot,
+};
git://git.onelab.eu / linux-2.6.git / blobdiff