#undef DEBUG
#undef DEBUG_LOW
-#include <linux/config.h>
#include <linux/types.h>
#include <linux/sched.h>
#include <linux/init.h>
return isr;
}
+static void kw_i2c_do_stop(struct pmac_i2c_host_kw *host, int result)
+{
+ kw_write_reg(reg_control, KW_I2C_CTL_STOP);
+ host->state = state_stop;
+ host->result = result;
+}
+
+
static void kw_i2c_handle_interrupt(struct pmac_i2c_host_kw *host, u8 isr)
{
u8 ack;
}
if (isr == 0) {
+ printk(KERN_WARNING "low_i2c: Timeout in i2c transfer"
+ " on keywest !\n");
if (host->state != state_stop) {
- DBG_LOW("KW: Timeout !\n");
- host->result = -EIO;
- goto stop;
- }
- if (host->state == state_stop) {
- ack = kw_read_reg(reg_status);
- if (ack & KW_I2C_STAT_BUSY)
- kw_write_reg(reg_status, 0);
- host->state = state_idle;
- kw_write_reg(reg_ier, 0x00);
- if (!host->polled)
- complete(&host->complete);
+ kw_i2c_do_stop(host, -EIO);
+ return;
}
+ ack = kw_read_reg(reg_status);
+ if (ack & KW_I2C_STAT_BUSY)
+ kw_write_reg(reg_status, 0);
+ host->state = state_idle;
+ kw_write_reg(reg_ier, 0x00);
+ if (!host->polled)
+ complete(&host->complete);
return;
}
if (isr & KW_I2C_IRQ_ADDR) {
ack = kw_read_reg(reg_status);
if (host->state != state_addr) {
- kw_write_reg(reg_isr, KW_I2C_IRQ_ADDR);
WRONG_STATE("KW_I2C_IRQ_ADDR");
- host->result = -EIO;
- goto stop;
+ kw_i2c_do_stop(host, -EIO);
}
if ((ack & KW_I2C_STAT_LAST_AAK) == 0) {
- host->result = -ENODEV;
- DBG_LOW("KW: NAK on address\n");
+ host->result = -ENXIO;
host->state = state_stop;
- return;
+ DBG_LOW("KW: NAK on address\n");
} else {
- if (host->len == 0) {
- kw_write_reg(reg_isr, KW_I2C_IRQ_ADDR);
- goto stop;
- }
- if (host->rw) {
+ if (host->len == 0)
+ kw_i2c_do_stop(host, 0);
+ else if (host->rw) {
host->state = state_read;
if (host->len > 1)
kw_write_reg(reg_control,
ack = kw_read_reg(reg_status);
if ((ack & KW_I2C_STAT_LAST_AAK) == 0) {
DBG_LOW("KW: nack on data write\n");
- host->result = -EIO;
- goto stop;
+ host->result = -EFBIG;
+ host->state = state_stop;
} else if (host->len) {
kw_write_reg(reg_data, *(host->data++));
host->len--;
- } else {
- kw_write_reg(reg_control, KW_I2C_CTL_STOP);
- host->state = state_stop;
- host->result = 0;
- }
- kw_write_reg(reg_isr, KW_I2C_IRQ_DATA);
+ } else
+ kw_i2c_do_stop(host, 0);
} else {
- kw_write_reg(reg_isr, KW_I2C_IRQ_DATA);
WRONG_STATE("KW_I2C_IRQ_DATA");
- if (host->state != state_stop) {
- host->result = -EIO;
- goto stop;
- }
+ if (host->state != state_stop)
+ kw_i2c_do_stop(host, -EIO);
}
+ kw_write_reg(reg_isr, KW_I2C_IRQ_DATA);
}
if (isr & KW_I2C_IRQ_STOP) {
complete(&host->complete);
}
+ /* Below should only happen in manual mode which we don't use ... */
if (isr & KW_I2C_IRQ_START)
kw_write_reg(reg_isr, KW_I2C_IRQ_START);
- return;
- stop:
- kw_write_reg(reg_control, KW_I2C_CTL_STOP);
- host->state = state_stop;
- return;
}
/* Interrupt handler */
-static irqreturn_t kw_i2c_irq(int irq, void *dev_id, struct pt_regs *regs)
+static irqreturn_t kw_i2c_irq(int irq, void *dev_id)
{
struct pmac_i2c_host_kw *host = dev_id;
unsigned long flags;
static struct pmac_i2c_host_kw *__init kw_i2c_host_init(struct device_node *np)
{
struct pmac_i2c_host_kw *host;
- u32 *psteps, *prate, *addrp, steps;
+ const u32 *psteps, *prate, *addrp;
+ u32 steps;
host = kzalloc(sizeof(struct pmac_i2c_host_kw), GFP_KERNEL);
if (host == NULL) {
* on all i2c keywest nodes so far ... we would have to fallback
* to macio parsing if that wasn't the case
*/
- addrp = (u32 *)get_property(np, "AAPL,address", NULL);
+ addrp = get_property(np, "AAPL,address", NULL);
if (addrp == NULL) {
printk(KERN_ERR "low_i2c: Can't find address for %s\n",
np->full_name);
host->timeout_timer.function = kw_i2c_timeout;
host->timeout_timer.data = (unsigned long)host;
- psteps = (u32 *)get_property(np, "AAPL,address-step", NULL);
+ psteps = get_property(np, "AAPL,address-step", NULL);
steps = psteps ? (*psteps) : 0x10;
for (host->bsteps = 0; (steps & 0x01) == 0; host->bsteps++)
steps >>= 1;
/* Select interface rate */
host->speed = KW_I2C_MODE_25KHZ;
- prate = (u32 *)get_property(np, "AAPL,i2c-rate", NULL);
+ prate = get_property(np, "AAPL,i2c-rate", NULL);
if (prate) switch(*prate) {
case 100:
host->speed = KW_I2C_MODE_100KHZ;
host->speed = KW_I2C_MODE_25KHZ;
break;
}
- if (np->n_intrs > 0)
- host->irq = np->intrs[0].line;
- else
- host->irq = NO_IRQ;
+ host->irq = irq_of_parse_and_map(np, 0);
+ if (host->irq == NO_IRQ)
+ printk(KERN_WARNING
+ "low_i2c: Failed to map interrupt for %s\n",
+ np->full_name);
host->base = ioremap((*addrp), 0x1000);
if (host->base == NULL) {
return NULL;
}
- /* Make sure IRA is disabled */
+ /* Make sure IRQ is disabled */
kw_write_reg(reg_ier, 0);
/* Request chip interrupt */
- if (request_irq(host->irq, kw_i2c_irq, SA_SHIRQ, "keywest i2c", host))
+ if (request_irq(host->irq, kw_i2c_irq, 0, "keywest i2c", host))
host->irq = NO_IRQ;
printk(KERN_INFO "KeyWest i2c @0x%08x irq %d %s\n",
} else {
for (child = NULL;
(child = of_get_next_child(np, child)) != NULL;) {
- u32 *reg =
- (u32 *)get_property(child, "reg", NULL);
+ const u32 *reg = get_property(child,
+ "reg", NULL);
if (reg == NULL)
continue;
kw_i2c_add(host, np, child, *reg);
{
struct device_node *controller, *busnode;
struct pmac_i2c_bus *bus;
- u32 *reg;
+ const u32 *reg;
int sz;
if (!smu_present())
if (strcmp(busnode->type, "i2c") &&
strcmp(busnode->type, "i2c-bus"))
continue;
- reg = (u32 *)get_property(busnode, "reg", NULL);
+ reg = get_property(busnode, "reg", NULL);
if (reg == NULL)
continue;
list_for_each_entry(bus, &pmac_i2c_busses, link) {
if (p == bus->busnode) {
if (prev && bus->flags & pmac_i2c_multibus) {
- u32 *reg;
- reg = (u32 *)get_property(prev, "reg",
- NULL);
+ const u32 *reg;
+ reg = get_property(prev, "reg", NULL);
if (!reg)
continue;
if (((*reg) >> 8) != bus->channel)
u8 pmac_i2c_get_dev_addr(struct device_node *device)
{
- u32 *reg = (u32 *)get_property(device, "reg", NULL);
+ const u32 *reg = get_property(device, "reg", NULL);
if (reg == NULL)
return 0;
/* some quirks for platform function decoding */
enum {
pmac_i2c_quirk_invmask = 0x00000001u,
+ pmac_i2c_quirk_skip = 0x00000002u,
};
static void pmac_i2c_devscan(void (*callback)(struct device_node *dev,
/* XXX Study device-tree's & apple drivers are get the quirks
* right !
*/
+ /* Workaround: It seems that running the clockspreading
+ * properties on the eMac will cause lockups during boot.
+ * The machine seems to work fine without that. So for now,
+ * let's make sure i2c-hwclock doesn't match about "imic"
+ * clocks and we'll figure out if we really need to do
+ * something special about those later.
+ */
+ { "i2c-hwclock", "imic5002", pmac_i2c_quirk_skip },
+ { "i2c-hwclock", "imic5003", pmac_i2c_quirk_skip },
{ "i2c-hwclock", NULL, pmac_i2c_quirk_invmask },
{ "i2c-cpu-voltage", NULL, 0},
{ "temp-monitor", NULL, 0 },
if (p->compatible &&
!device_is_compatible(np, p->compatible))
continue;
+ if (p->quirks & pmac_i2c_quirk_skip)
+ break;
callback(np, p->quirks);
break;
}
return 0;
i2c_inited = 1;
+ if (!machine_is(powermac))
+ return 0;
+
/* Probe keywest-i2c busses */
kw_i2c_probe();
git://git.onelab.eu / linux-2.6.git / blobdiff