/*
- * arch/ppc/kernel/except_8xx.S
- *
* PowerPC version
* Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
* Rewritten by Cort Dougan (cort@cs.nmt.edu) for PReP
#include <asm/cputable.h>
#include <asm/thread_info.h>
#include <asm/ppc_asm.h>
-#include <asm/offsets.h>
+#include <asm/asm-offsets.h>
/* Macro to make the code more readable. */
#ifdef CONFIG_8xx_CPU6
ret_from_except)
/* System reset */
- EXCEPTION(0x100, Reset, UnknownException, EXC_XFER_STD)
+ EXCEPTION(0x100, Reset, unknown_exception, EXC_XFER_STD)
/* Machine check */
. = 0x200
mfspr r5,SPRN_DSISR
stw r5,_DSISR(r11)
addi r3,r1,STACK_FRAME_OVERHEAD
- EXC_XFER_STD(0x200, MachineCheckException)
+ EXC_XFER_STD(0x200, machine_check_exception)
/* Data access exception.
* This is "never generated" by the MPC8xx. We jump to it for other
mfspr r5,SPRN_DSISR
stw r5,_DSISR(r11)
addi r3,r1,STACK_FRAME_OVERHEAD
- EXC_XFER_EE(0x600, AlignmentException)
+ EXC_XFER_EE(0x600, alignment_exception)
/* Program check exception */
- EXCEPTION(0x700, ProgramCheck, ProgramCheckException, EXC_XFER_STD)
+ EXCEPTION(0x700, ProgramCheck, program_check_exception, EXC_XFER_STD)
/* No FPU on MPC8xx. This exception is not supposed to happen.
*/
- EXCEPTION(0x800, FPUnavailable, UnknownException, EXC_XFER_STD)
+ EXCEPTION(0x800, FPUnavailable, unknown_exception, EXC_XFER_STD)
/* Decrementer */
EXCEPTION(0x900, Decrementer, timer_interrupt, EXC_XFER_LITE)
- EXCEPTION(0xa00, Trap_0a, UnknownException, EXC_XFER_EE)
- EXCEPTION(0xb00, Trap_0b, UnknownException, EXC_XFER_EE)
+ EXCEPTION(0xa00, Trap_0a, unknown_exception, EXC_XFER_EE)
+ EXCEPTION(0xb00, Trap_0b, unknown_exception, EXC_XFER_EE)
/* System call */
. = 0xc00
EXC_XFER_EE_LITE(0xc00, DoSyscall)
/* Single step - not used on 601 */
- EXCEPTION(0xd00, SingleStep, SingleStepException, EXC_XFER_STD)
- EXCEPTION(0xe00, Trap_0e, UnknownException, EXC_XFER_EE)
- EXCEPTION(0xf00, Trap_0f, UnknownException, EXC_XFER_EE)
+ EXCEPTION(0xd00, SingleStep, single_step_exception, EXC_XFER_STD)
+ EXCEPTION(0xe00, Trap_0e, unknown_exception, EXC_XFER_EE)
+ EXCEPTION(0xf00, Trap_0f, unknown_exception, EXC_XFER_EE)
/* On the MPC8xx, this is a software emulation interrupt. It occurs
* for all unimplemented and illegal instructions.
* For the MPC8xx, this is a software tablewalk to load the instruction
* TLB. It is modelled after the example in the Motorola manual. The task
* switch loads the M_TWB register with the pointer to the first level table.
- * If we discover there is no second level table (the value is zero), the
- * plan was to load that into the TLB, which causes another fault into the
- * TLB Error interrupt where we can handle such problems. However, that did
- * not work, so if we discover there is no second level table, we restore
- * registers and branch to the error exception. We have to use the MD_xxx
- * registers for the tablewalk because the equivalent MI_xxx registers
- * only perform the attribute functions.
+ * If we discover there is no second level table (value is zero) or if there
+ * is an invalid pte, we load that into the TLB, which causes another fault
+ * into the TLB Error interrupt where we can handle such problems.
+ * We have to use the MD_xxx registers for the tablewalk because the
+ * equivalent MI_xxx registers only perform the attribute functions.
*/
InstructionTLBMiss:
#ifdef CONFIG_8xx_CPU6
. = 0x1200
DataStoreTLBMiss:
-#ifdef CONFIG_8xx_CPU6
stw r3, 8(r0)
-#endif
DO_8xx_CPU6(0x3f80, r3)
mtspr SPRN_M_TW, r10 /* Save a couple of working registers */
mfcr r10
lis r11, swapper_pg_dir@h
ori r11, r11, swapper_pg_dir@l
rlwimi r10, r11, 0, 2, 19
+ stw r12, 16(r0)
+ b LoadLargeDTLB
3:
lwz r11, 0(r10) /* Get the level 1 entry */
rlwinm. r10, r11,0,0,19 /* Extract page descriptor page address */
lwz r11, 0(r0)
mtcr r11
lwz r11, 4(r0)
-#ifdef CONFIG_8xx_CPU6
lwz r3, 8(r0)
-#endif
rfi
/* This is an instruction TLB error on the MPC8xx. This could be due
InstructionTLBError:
b InstructionAccess
+LoadLargeDTLB:
+ li r12, 0
+ lwz r11, 0(r10) /* Get the level 1 entry */
+ rlwinm. r10, r11,0,0,19 /* Extract page descriptor page address */
+ beq 3f /* If zero, don't try to find a pte */
+
+ /* We have a pte table, so load fetch the pte from the table.
+ */
+ ori r11, r11, 1 /* Set valid bit in physical L2 page */
+ DO_8xx_CPU6(0x3b80, r3)
+ mtspr SPRN_MD_TWC, r11 /* Load pte table base address */
+ mfspr r10, SPRN_MD_TWC /* ....and get the pte address */
+ lwz r10, 0(r10) /* Get the pte */
+
+ /* Insert the Guarded flag into the TWC from the Linux PTE.
+ * It is bit 27 of both the Linux PTE and the TWC (at least
+ * I got that right :-). It will be better when we can put
+ * this into the Linux pgd/pmd and load it in the operation
+ * above.
+ */
+ rlwimi r11, r10, 0, 27, 27
+
+ rlwimi r12, r10, 0, 0, 9 /* extract phys. addr */
+ mfspr r3, SPRN_MD_EPN
+ rlwinm r3, r3, 0, 0, 9 /* extract virtual address */
+ tophys(r3, r3)
+ cmpw r3, r12 /* only use 8M page if it is a direct
+ kernel mapping */
+ bne 1f
+ ori r11, r11, MD_PS8MEG
+ li r12, 1
+ b 2f
+1:
+ li r12, 0 /* can't use 8MB TLB, so zero r12. */
+2:
+ DO_8xx_CPU6(0x3b80, r3)
+ mtspr SPRN_MD_TWC, r11
+
+ /* The Linux PTE won't go exactly into the MMU TLB.
+ * Software indicator bits 21, 22 and 28 must be clear.
+ * Software indicator bits 24, 25, 26, and 27 must be
+ * set. All other Linux PTE bits control the behavior
+ * of the MMU.
+ */
+3: li r11, 0x00f0
+ rlwimi r10, r11, 0, 24, 28 /* Set 24-27, clear 28 */
+ cmpwi r12, 1
+ bne 4f
+ ori r10, r10, 0x8
+
+ mfspr r12, SPRN_MD_EPN
+ lis r3, 0xff80 /* 10-19 must be clear for 8MB TLB */
+ ori r3, r3, 0x0fff
+ and r12, r3, r12
+ DO_8xx_CPU6(0x3780, r3)
+ mtspr SPRN_MD_EPN, r12
+
+ lis r3, 0xff80 /* 10-19 must be clear for 8MB TLB */
+ ori r3, r3, 0x0fff
+ and r10, r3, r10
+4:
+ DO_8xx_CPU6(0x3d80, r3)
+ mtspr SPRN_MD_RPN, r10 /* Update TLB entry */
+
+ mfspr r10, SPRN_M_TW /* Restore registers */
+ lwz r11, 0(r0)
+ mtcr r11
+ lwz r11, 4(r0)
+
+ lwz r12, 16(r0)
+#ifdef CONFIG_8xx_CPU6
+ lwz r3, 8(r0)
+#endif
+ rfi
+
/* This is the data TLB error on the MPC8xx. This could be due to
* many reasons, including a dirty update to a pte. We can catch that
* one here, but anything else is an error. First, we track down the
#endif
b DataAccess
- EXCEPTION(0x1500, Trap_15, UnknownException, EXC_XFER_EE)
- EXCEPTION(0x1600, Trap_16, UnknownException, EXC_XFER_EE)
- EXCEPTION(0x1700, Trap_17, UnknownException, EXC_XFER_EE)
- EXCEPTION(0x1800, Trap_18, UnknownException, EXC_XFER_EE)
- EXCEPTION(0x1900, Trap_19, UnknownException, EXC_XFER_EE)
- EXCEPTION(0x1a00, Trap_1a, UnknownException, EXC_XFER_EE)
- EXCEPTION(0x1b00, Trap_1b, UnknownException, EXC_XFER_EE)
+ EXCEPTION(0x1500, Trap_15, unknown_exception, EXC_XFER_EE)
+ EXCEPTION(0x1600, Trap_16, unknown_exception, EXC_XFER_EE)
+ EXCEPTION(0x1700, Trap_17, unknown_exception, EXC_XFER_EE)
+ EXCEPTION(0x1800, Trap_18, unknown_exception, EXC_XFER_EE)
+ EXCEPTION(0x1900, Trap_19, unknown_exception, EXC_XFER_EE)
+ EXCEPTION(0x1a00, Trap_1a, unknown_exception, EXC_XFER_EE)
+ EXCEPTION(0x1b00, Trap_1b, unknown_exception, EXC_XFER_EE)
/* On the MPC8xx, these next four traps are used for development
* support of breakpoints and such. Someday I will get around to
* using them.
*/
- EXCEPTION(0x1c00, Trap_1c, UnknownException, EXC_XFER_EE)
- EXCEPTION(0x1d00, Trap_1d, UnknownException, EXC_XFER_EE)
- EXCEPTION(0x1e00, Trap_1e, UnknownException, EXC_XFER_EE)
- EXCEPTION(0x1f00, Trap_1f, UnknownException, EXC_XFER_EE)
+ EXCEPTION(0x1c00, Trap_1c, unknown_exception, EXC_XFER_EE)
+ EXCEPTION(0x1d00, Trap_1d, unknown_exception, EXC_XFER_EE)
+ EXCEPTION(0x1e00, Trap_1e, unknown_exception, EXC_XFER_EE)
+ EXCEPTION(0x1f00, Trap_1f, unknown_exception, EXC_XFER_EE)
. = 0x2000
mtspr SPRN_MD_TWC, r9
li r11, MI_BOOTINIT /* Create RPN for address 0 */
addis r11, r11, 0x0080 /* Add 8M */
- mtspr SPRN_MD_RPN, r8
+ mtspr SPRN_MD_RPN, r11
+
+ addi r10, r10, 0x0100
+ mtspr SPRN_MD_CTR, r10
addis r8, r8, 0x0080 /* Add 8M */
mtspr SPRN_MD_EPN, r8
mtspr SPRN_MD_TWC, r9
addis r11, r11, 0x0080 /* Add 8M */
- mtspr SPRN_MD_RPN, r8
+ mtspr SPRN_MD_RPN, r11
#endif
/* Since the cache is enabled according to the information we
git://git.onelab.eu / linux-2.6.git / blobdiff