/*
+ * arch/ppc/platforms/cpci405.c
+ *
* Board setup routines for the esd CPCI-405 cPCI Board.
*
- * Copyright 2001-2006 esd electronic system design - hannover germany
+ * Author: Stefan Roese
+ * stefan.roese@esd-electronics.com
*
- * Authors: Matthias Fuchs
- * matthias.fuchs@esd-electronics.com
- * Stefan Roese
- * stefan.roese@esd-electronics.com
+ * Copyright 2001 esd electronic system design - hannover germany
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
*
*/
+#include <linux/config.h>
#include <linux/init.h>
#include <linux/pci.h>
#include <asm/system.h>
#include <asm/pci-bridge.h>
#include <asm/machdep.h>
#include <asm/todc.h>
-#include <linux/serial.h>
-#include <linux/serial_core.h>
#include <asm/ocp.h>
-#include <asm/ibm_ocp_pci.h>
-#include <platforms/4xx/ibm405gp.h>
-#ifdef CONFIG_GEN_RTC
void *cpci405_nvram;
-#endif
-
-extern bd_t __res;
/*
* Some IRQs unique to CPCI-405.
* A B C D
*/
{
- {28, 29, 30, 27}, /* IDSEL 15 - cPCI slot 8 */
- {29, 30, 27, 28}, /* IDSEL 16 - cPCI slot 7 */
- {30, 27, 28, 29}, /* IDSEL 17 - cPCI slot 6 */
- {27, 28, 29, 30}, /* IDSEL 18 - cPCI slot 5 */
- {28, 29, 30, 27}, /* IDSEL 19 - cPCI slot 4 */
- {29, 30, 27, 28}, /* IDSEL 20 - cPCI slot 3 */
- {30, 27, 28, 29}, /* IDSEL 21 - cPCI slot 2 */
+ {28, 28, 28, 28}, /* IDSEL 15 - cPCI slot 8 */
+ {29, 29, 29, 29}, /* IDSEL 16 - cPCI slot 7 */
+ {30, 30, 30, 30}, /* IDSEL 17 - cPCI slot 6 */
+ {27, 27, 27, 27}, /* IDSEL 18 - cPCI slot 5 */
+ {28, 28, 28, 28}, /* IDSEL 19 - cPCI slot 4 */
+ {29, 29, 29, 29}, /* IDSEL 20 - cPCI slot 3 */
+ {30, 30, 30, 30}, /* IDSEL 21 - cPCI slot 2 */
};
const long min_idsel = 15, max_idsel = 21, irqs_per_slot = 4;
return PCI_IRQ_TABLE_LOOKUP;
};
-/* The serial clock for the chip is an internal clock determined by
- * different clock speeds/dividers.
- * Calculate the proper input baud rate and setup the serial driver.
- */
-static void __init
-cpci405_early_serial_map(void)
-{
- u32 uart_div;
- int uart_clock;
- struct uart_port port;
-
- /* Calculate the serial clock input frequency
- *
- * The uart clock is the cpu frequency (provided in the board info
- * structure) divided by the external UART Divisor.
- */
- uart_div = ((mfdcr(DCRN_CHCR_BASE) & CHR0_UDIV) >> 1) + 1;
- uart_clock = __res.bi_procfreq / uart_div;
-
- /* Setup serial port access */
- memset(&port, 0, sizeof(port));
-#if defined(CONFIG_UART0_TTYS0)
- port.membase = (void*)UART0_IO_BASE;
- port.irq = UART0_INT;
-#else
- port.membase = (void*)UART1_IO_BASE;
- port.irq = UART1_INT;
-#endif
- port.uartclk = uart_clock;
- port.regshift = 0;
- port.iotype = UPIO_MEM;
- port.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST;
- port.line = 0;
-
- if (early_serial_setup(&port) != 0) {
- printk("Early serial init of port 0 failed\n");
- }
-#if defined(CONFIG_UART0_TTYS0)
- port.membase = (void*)UART1_IO_BASE;
- port.irq = UART1_INT;
-#else
- port.membase = (void*)UART0_IO_BASE;
- port.irq = UART0_INT;
-#endif
- port.line = 1;
-
- if (early_serial_setup(&port) != 0) {
- printk("Early serial init of port 1 failed\n");
- }
-}
-
void __init
cpci405_setup_arch(void)
{
ibm_ocp_set_emac(0, 0);
- cpci405_early_serial_map();
-
-#ifdef CONFIG_GEN_RTC
- TODC_INIT(TODC_TYPE_MK48T35,
- cpci405_nvram, cpci405_nvram, cpci405_nvram, 8);
-#endif
-}
-
-void __init
-bios_fixup(struct pci_controller *hose, struct pcil0_regs *pcip)
-{
- unsigned int bar_response, bar;
-
- /* Disable region first */
- out_le32((void *) &(pcip->pmm[0].ma), 0x00000000);
- /* PLB starting addr, PCI: 0x80000000 */
- out_le32((void *) &(pcip->pmm[0].la), 0x80000000);
- /* PCI start addr, 0x80000000 */
- out_le32((void *) &(pcip->pmm[0].pcila), PPC405_PCI_MEM_BASE);
- /* 512MB range of PLB to PCI */
- out_le32((void *) &(pcip->pmm[0].pciha), 0x00000000);
- /* Enable no pre-fetch, enable region */
- out_le32((void *) &(pcip->pmm[0].ma), ((0xffffffff -
- (PPC405_PCI_UPPER_MEM -
- PPC405_PCI_MEM_BASE)) | 0x01));
-
- /* Disable region one */
- out_le32((void *) &(pcip->pmm[1].ma), 0x00000000);
- out_le32((void *) &(pcip->pmm[1].la), 0x00000000);
- out_le32((void *) &(pcip->pmm[1].pcila), 0x00000000);
- out_le32((void *) &(pcip->pmm[1].pciha), 0x00000000);
- out_le32((void *) &(pcip->pmm[1].ma), 0x00000000);
- out_le32((void *) &(pcip->ptm1ms), 0x00000001);
-
- /* Disable region two */
- out_le32((void *) &(pcip->pmm[2].ma), 0x00000000);
- out_le32((void *) &(pcip->pmm[2].la), 0x00000000);
- out_le32((void *) &(pcip->pmm[2].pcila), 0x00000000);
- out_le32((void *) &(pcip->pmm[2].pciha), 0x00000000);
- out_le32((void *) &(pcip->pmm[2].ma), 0x00000000);
- out_le32((void *) &(pcip->ptm2ms), 0x00000000);
- out_le32((void *) &(pcip->ptm2la), 0x00000000);
-
- /* Zero config bars */
- for (bar = PCI_BASE_ADDRESS_1; bar <= PCI_BASE_ADDRESS_2; bar += 4) {
- early_write_config_dword(hose, hose->first_busno,
- PCI_FUNC(hose->first_busno), bar,
- 0x00000000);
- early_read_config_dword(hose, hose->first_busno,
- PCI_FUNC(hose->first_busno), bar,
- &bar_response);
- }
+ TODC_INIT(TODC_TYPE_MK48T35, cpci405_nvram, cpci405_nvram, cpci405_nvram, 8);
}
void __init
cpci405_map_io(void)
{
ppc4xx_map_io();
-
-#ifdef CONFIG_GEN_RTC
cpci405_nvram = ioremap(CPCI405_NVRAM_PADDR, CPCI405_NVRAM_SIZE);
-#endif
}
void __init
ppc_md.setup_arch = cpci405_setup_arch;
ppc_md.setup_io_mappings = cpci405_map_io;
-#ifdef CONFIG_GEN_RTC
ppc_md.time_init = todc_time_init;
ppc_md.set_rtc_time = todc_set_rtc_time;
ppc_md.get_rtc_time = todc_get_rtc_time;
ppc_md.nvram_read_val = todc_direct_read_val;
ppc_md.nvram_write_val = todc_direct_write_val;
-#endif
}
git://git.onelab.eu / linux-2.6.git / blobdiff