/*
- * arch/ppc/platform/85xx/mpc85xx_cds_common.c
- *
* MPC85xx CDS board specific routines
*
- * Maintainer: Kumar Gala <kumar.gala@freescale.com>
+ * Maintainer: Kumar Gala <galak@kernel.crashing.org>
*
* Copyright 2004 Freescale Semiconductor, Inc
*
#include <linux/major.h>
#include <linux/console.h>
#include <linux/delay.h>
-#include <linux/irq.h>
#include <linux/seq_file.h>
#include <linux/serial.h>
#include <linux/module.h>
#include <asm/todc.h>
#include <asm/io.h>
#include <asm/machdep.h>
-#include <asm/prom.h>
#include <asm/open_pic.h>
#include <asm/i8259.h>
#include <asm/bootinfo.h>
#include <asm/mpc85xx.h>
#include <asm/irq.h>
#include <asm/immap_85xx.h>
-#include <asm/immap_cpm2.h>
+#include <asm/cpm2.h>
#include <asm/ppc_sys.h>
#include <asm/kgdb.h>
static volatile u8 * cadmus;
/* Internal interrupts are all Level Sensitive, and Positive Polarity */
-
static u_char mpc85xx_cds_openpic_initsenses[] __initdata = {
- (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 0: L2 Cache */
- (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 1: ECM */
- (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 2: DDR DRAM */
- (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 3: LBIU */
- (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 4: DMA 0 */
- (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 5: DMA 1 */
- (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 6: DMA 2 */
- (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 7: DMA 3 */
- (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 8: PCI/PCI-X */
- (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 9: RIO Inbound Port Write Error */
- (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 10: RIO Doorbell Inbound */
- (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 11: RIO Outbound Message */
- (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 12: RIO Inbound Message */
- (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 13: TSEC 0 Transmit */
- (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 14: TSEC 0 Receive */
- (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 15: Unused */
- (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 16: Unused */
- (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 17: Unused */
- (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 18: TSEC 0 Receive/Transmit Error */
- (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 19: TSEC 1 Transmit */
- (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 20: TSEC 1 Receive */
- (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 21: Unused */
- (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 22: Unused */
- (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 23: Unused */
- (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 24: TSEC 1 Receive/Transmit Error */
- (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 25: Fast Ethernet */
- (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 26: DUART */
- (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 27: I2C */
- (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 28: Performance Monitor */
- (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 29: Unused */
- (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 30: CPM */
- (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 31: Unused */
+ MPC85XX_INTERNAL_IRQ_SENSES,
#if defined(CONFIG_PCI)
(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 0: PCI1 slot */
(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 1: PCI1 slot */
}
#ifdef CONFIG_CPM2
-static void cpm2_cascade(int irq, void *dev_id, struct pt_regs *regs)
+static irqreturn_t cpm2_cascade(int irq, void *dev_id, struct pt_regs *regs)
{
while((irq = cpm2_get_irq(regs)) >= 0)
__do_IRQ(irq, regs);
+ return IRQ_HANDLED;
}
static struct irqaction cpm2_irqaction = {
OpenPIC_NumInitSenses = sizeof (mpc85xx_cds_openpic_initsenses);
/* Skip reserved space and internal sources */
+#ifdef CONFIG_MPC8548
+ openpic_set_sources(0, 48, OpenPIC_Addr + 0x10200);
+#else
openpic_set_sources(0, 32, OpenPIC_Addr + 0x10200);
+#endif
/* Map PIC IRQs 0-11 */
- openpic_set_sources(32, 12, OpenPIC_Addr + 0x10000);
+ openpic_set_sources(48, 12, OpenPIC_Addr + 0x10000);
/* we let openpic interrupts starting from an offset, to
* leave space for cascading interrupts underneath.
#ifdef CONFIG_PCI
openpic_hookup_cascade(PIRQ0A, "82c59 cascade", i8259_irq);
- for (i = 0; i < NUM_8259_INTERRUPTS; i++)
- irq_desc[i].handler = &i8259_pic;
-
- i8259_init(0);
+ i8259_init(0, 0);
#endif
#ifdef CONFIG_CPM2
void __init
mpc85xx_cds_pcibios_fixup(void)
{
- struct pci_dev *dev = NULL;
+ struct pci_dev *dev;
u_char c;
- if ((dev = pci_find_device(PCI_VENDOR_ID_VIA,
+ if ((dev = pci_get_device(PCI_VENDOR_ID_VIA,
PCI_DEVICE_ID_VIA_82C586_1, NULL))) {
/*
* U-Boot does not set the enable bits
*/
dev->irq = 14;
pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq);
+ pci_dev_put(dev);
}
/*
* Force legacy USB interrupt routing
*/
- if ((dev = pci_find_device(PCI_VENDOR_ID_VIA,
+ if ((dev = pci_get_device(PCI_VENDOR_ID_VIA,
PCI_DEVICE_ID_VIA_82C586_2, NULL))) {
dev->irq = 10;
pci_write_config_byte(dev, PCI_INTERRUPT_LINE, 10);
+ pci_dev_put(dev);
}
- if ((dev = pci_find_device(PCI_VENDOR_ID_VIA,
+ if ((dev = pci_get_device(PCI_VENDOR_ID_VIA,
PCI_DEVICE_ID_VIA_82C586_2, dev))) {
dev->irq = 11;
pci_write_config_byte(dev, PCI_INTERRUPT_LINE, 11);
+ pci_dev_put(dev);
}
}
#endif /* CONFIG_PCI */
bd_t *binfo = (bd_t *) __res;
unsigned int freq;
struct gianfar_platform_data *pdata;
+ struct gianfar_mdio_data *mdata;
/* get the core frequency */
freq = binfo->bi_intfreq;
#ifdef CONFIG_SERIAL_TEXT_DEBUG
/* Invalidate the entry we stole earlier the serial ports
* should be properly mapped */
- invalidate_tlbcam_entry(NUM_TLBCAMS - 1);
+ invalidate_tlbcam_entry(num_tlbcam_entries - 1);
#endif
+ /* setup the board related info for the MDIO bus */
+ mdata = (struct gianfar_mdio_data *) ppc_sys_get_pdata(MPC85xx_MDIO);
+
+ mdata->irq[0] = MPC85xx_IRQ_EXT5;
+ mdata->irq[1] = MPC85xx_IRQ_EXT5;
+ mdata->irq[2] = -1;
+ mdata->irq[3] = -1;
+ mdata->irq[31] = -1;
+
/* setup the board related information for the enet controllers */
pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC85xx_TSEC1);
- pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR;
- pdata->interruptPHY = MPC85xx_IRQ_EXT5;
- pdata->phyid = 0;
- /* fixup phy address */
- pdata->phy_reg_addr += binfo->bi_immr_base;
- memcpy(pdata->mac_addr, binfo->bi_enetaddr, 6);
+ if (pdata) {
+ pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR;
+ pdata->bus_id = 0;
+ pdata->phy_id = 0;
+ memcpy(pdata->mac_addr, binfo->bi_enetaddr, 6);
+ }
pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC85xx_TSEC2);
- pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR;
- pdata->interruptPHY = MPC85xx_IRQ_EXT5;
- pdata->phyid = 1;
- /* fixup phy address */
- pdata->phy_reg_addr += binfo->bi_immr_base;
- memcpy(pdata->mac_addr, binfo->bi_enet1addr, 6);
+ if (pdata) {
+ pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR;
+ pdata->bus_id = 0;
+ pdata->phy_id = 1;
+ memcpy(pdata->mac_addr, binfo->bi_enet1addr, 6);
+ }
+
+ pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC85xx_eTSEC1);
+ if (pdata) {
+ pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR;
+ pdata->bus_id = 0;
+ pdata->phy_id = 0;
+ memcpy(pdata->mac_addr, binfo->bi_enetaddr, 6);
+ }
+
+ pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC85xx_eTSEC2);
+ if (pdata) {
+ pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR;
+ pdata->bus_id = 0;
+ pdata->phy_id = 1;
+ memcpy(pdata->mac_addr, binfo->bi_enet1addr, 6);
+ }
+ ppc_sys_device_remove(MPC85xx_eTSEC3);
+ ppc_sys_device_remove(MPC85xx_eTSEC4);
#ifdef CONFIG_BLK_DEV_INITRD
if (initrd_start)
struct uart_port p;
/* Use the last TLB entry to map CCSRBAR to allow access to DUART regs */
- settlbcam(NUM_TLBCAMS - 1, binfo->bi_immr_base,
+ settlbcam(num_tlbcam_entries - 1, binfo->bi_immr_base,
binfo->bi_immr_base, MPC85xx_CCSRBAR_SIZE, _PAGE_IO, 0);
memset(&p, 0, sizeof (p));
- p.iotype = SERIAL_IO_MEM;
+ p.iotype = UPIO_MEM;
p.membase = (void *) binfo->bi_immr_base + MPC85xx_UART0_OFFSET;
p.uartclk = binfo->bi_busfreq;
gen550_init(0, &p);
memset(&p, 0, sizeof (p));
- p.iotype = SERIAL_IO_MEM;
+ p.iotype = UPIO_MEM;
p.membase = (void *) binfo->bi_immr_base + MPC85xx_UART1_OFFSET;
p.uartclk = binfo->bi_busfreq;
git://git.onelab.eu / linux-2.6.git / blobdiff