#include <asm/page.h>
#include <asm/atomic.h>
#include <asm/time.h>
+#include <asm/todc.h>
#include <asm/io.h>
#include <asm/machdep.h>
#include <asm/prom.h>
#include <asm/open_pic.h>
+#include <asm/i8259.h>
#include <asm/bootinfo.h>
#include <asm/pci-bridge.h>
#include <asm/mpc85xx.h>
/* Internal interrupts are all Level Sensitive, and Positive Polarity */
static u_char mpc85xx_cds_openpic_initsenses[] __initdata = {
- (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 0: L2 Cache */
- (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 1: ECM */
- (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 2: DDR DRAM */
- (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 3: LBIU */
- (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 4: DMA 0 */
- (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 5: DMA 1 */
- (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 6: DMA 2 */
- (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 7: DMA 3 */
- (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 8: PCI/PCI-X */
- (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 9: RIO Inbound Port Write Error */
- (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 10: RIO Doorbell Inbound */
- (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 11: RIO Outbound Message */
- (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 12: RIO Inbound Message */
- (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 13: TSEC 0 Transmit */
- (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 14: TSEC 0 Receive */
- (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 15: Unused */
- (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 16: Unused */
- (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 17: Unused */
- (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 18: TSEC 0 Receive/Transmit Error */
- (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 19: TSEC 1 Transmit */
- (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 20: TSEC 1 Receive */
- (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 21: Unused */
- (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 22: Unused */
- (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 23: Unused */
- (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 24: TSEC 1 Receive/Transmit Error */
- (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 25: Fast Ethernet */
- (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 26: DUART */
- (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 27: I2C */
- (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 28: Performance Monitor */
- (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 29: Unused */
- (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 30: CPM */
- (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 31: Unused */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 0: L2 Cache */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 1: ECM */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 2: DDR DRAM */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 3: LBIU */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 4: DMA 0 */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 5: DMA 1 */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 6: DMA 2 */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 7: DMA 3 */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 8: PCI/PCI-X */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 9: RIO Inbound Port Write Error */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 10: RIO Doorbell Inbound */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 11: RIO Outbound Message */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 12: RIO Inbound Message */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 13: TSEC 0 Transmit */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 14: TSEC 0 Receive */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 15: Unused */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 16: Unused */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 17: Unused */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 18: TSEC 0 Receive/Transmit Error */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 19: TSEC 1 Transmit */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 20: TSEC 1 Receive */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 21: Unused */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 22: Unused */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 23: Unused */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 24: TSEC 1 Receive/Transmit Error */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 25: Fast Ethernet */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 26: DUART */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 27: I2C */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 28: Performance Monitor */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 29: Unused */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 30: CPM */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 31: Unused */
#if defined(CONFIG_PCI)
- (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 0: PCI1 slot */
- (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 1: PCI1 slot */
- (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 2: PCI1 slot */
- (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 3: PCI1 slot */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 0: PCI1 slot */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 1: PCI1 slot */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 2: PCI1 slot */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 3: PCI1 slot */
#else
- 0x0, /* External 0: */
- 0x0, /* External 1: */
- 0x0, /* External 2: */
- 0x0, /* External 3: */
+ 0x0, /* External 0: */
+ 0x0, /* External 1: */
+ 0x0, /* External 2: */
+ 0x0, /* External 3: */
#endif
- 0x0, /* External 4: */
- (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 5: PHY */
- 0x0, /* External 6: */
- 0x0, /* External 7: */
- 0x0, /* External 8: */
- 0x0, /* External 9: */
- 0x0, /* External 10: */
+ 0x0, /* External 4: */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 5: PHY */
+ 0x0, /* External 6: */
+ 0x0, /* External 7: */
+ 0x0, /* External 8: */
+ 0x0, /* External 9: */
+ 0x0, /* External 10: */
#if defined(CONFIG_85xx_PCI2) && defined(CONFIG_PCI)
- (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 11: PCI2 slot 0 */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 11: PCI2 slot 0 */
#else
- 0x0, /* External 11: */
+ 0x0, /* External 11: */
#endif
};
int
mpc85xx_cds_show_cpuinfo(struct seq_file *m)
{
- uint pvid, svid, phid1;
- uint memsize = total_memory;
- bd_t *binfo = (bd_t *) __res;
- unsigned int freq;
+ uint pvid, svid, phid1;
+ uint memsize = total_memory;
+ bd_t *binfo = (bd_t *) __res;
+ unsigned int freq;
- /* get the core frequency */
- freq = binfo->bi_intfreq;
+ /* get the core frequency */
+ freq = binfo->bi_intfreq;
- pvid = mfspr(PVR);
- svid = mfspr(SVR);
+ pvid = mfspr(SPRN_PVR);
+ svid = mfspr(SPRN_SVR);
- seq_printf(m, "Vendor\t\t: Freescale Semiconductor\n");
- seq_printf(m, "Machine\t\t: CDS (%x)\n", cadmus[CM_VER]);
+ seq_printf(m, "Vendor\t\t: Freescale Semiconductor\n");
+ seq_printf(m, "Machine\t\t: CDS - MPC%s (%x)\n", cur_ppc_sys_spec->ppc_sys_name, cadmus[CM_VER]);
seq_printf(m, "clock\t\t: %dMHz\n", freq / 1000000);
- seq_printf(m, "PVR\t\t: 0x%x\n", pvid);
- seq_printf(m, "SVR\t\t: 0x%x\n", svid);
+ seq_printf(m, "PVR\t\t: 0x%x\n", pvid);
+ seq_printf(m, "SVR\t\t: 0x%x\n", svid);
- /* Display cpu Pll setting */
- phid1 = mfspr(HID1);
- seq_printf(m, "PLL setting\t: 0x%x\n", ((phid1 >> 24) & 0x3f));
+ /* Display cpu Pll setting */
+ phid1 = mfspr(SPRN_HID1);
+ seq_printf(m, "PLL setting\t: 0x%x\n", ((phid1 >> 24) & 0x3f));
- /* Display the amount of memory */
- seq_printf(m, "Memory\t\t: %d MB\n", memsize / (1024 * 1024));
+ /* Display the amount of memory */
+ seq_printf(m, "Memory\t\t: %d MB\n", memsize / (1024 * 1024));
- return 0;
+ return 0;
}
#ifdef CONFIG_CPM2
mpc85xx_cds_init_IRQ(void)
{
bd_t *binfo = (bd_t *) __res;
-#ifdef CONFIG_CPM2
- volatile cpm2_map_t *immap = cpm2_immr;
int i;
-#endif
- /* Determine the Physical Address of the OpenPIC regs */
- phys_addr_t OpenPIC_PAddr = binfo->bi_immr_base + MPC85xx_OPENPIC_OFFSET;
- OpenPIC_Addr = ioremap(OpenPIC_PAddr, MPC85xx_OPENPIC_SIZE);
- OpenPIC_InitSenses = mpc85xx_cds_openpic_initsenses;
- OpenPIC_NumInitSenses = sizeof (mpc85xx_cds_openpic_initsenses);
+ /* Determine the Physical Address of the OpenPIC regs */
+ phys_addr_t OpenPIC_PAddr = binfo->bi_immr_base + MPC85xx_OPENPIC_OFFSET;
+ OpenPIC_Addr = ioremap(OpenPIC_PAddr, MPC85xx_OPENPIC_SIZE);
+ OpenPIC_InitSenses = mpc85xx_cds_openpic_initsenses;
+ OpenPIC_NumInitSenses = sizeof (mpc85xx_cds_openpic_initsenses);
- /* Skip reserved space and internal sources */
- openpic_set_sources(0, 32, OpenPIC_Addr + 0x10200);
- /* Map PIC IRQs 0-11 */
- openpic_set_sources(32, 12, OpenPIC_Addr + 0x10000);
+ /* Skip reserved space and internal sources */
+ openpic_set_sources(0, 32, OpenPIC_Addr + 0x10200);
+ /* Map PIC IRQs 0-11 */
+ openpic_set_sources(32, 12, OpenPIC_Addr + 0x10000);
- /* we let openpic interrupts starting from an offset, to
- * leave space for cascading interrupts underneath.
- */
- openpic_init(MPC85xx_OPENPIC_IRQ_OFFSET);
+ /* we let openpic interrupts starting from an offset, to
+ * leave space for cascading interrupts underneath.
+ */
+ openpic_init(MPC85xx_OPENPIC_IRQ_OFFSET);
-#ifdef CONFIG_CPM2
- /* disable all CPM interupts */
- immap->im_intctl.ic_simrh = 0x0;
- immap->im_intctl.ic_simrl = 0x0;
+#ifdef CONFIG_PCI
+ openpic_hookup_cascade(PIRQ0A, "82c59 cascade", i8259_irq);
- for (i = CPM_IRQ_OFFSET; i < (NR_CPM_INTS + CPM_IRQ_OFFSET); i++)
- irq_desc[i].handler = &cpm2_pic;
+ for (i = 0; i < NUM_8259_INTERRUPTS; i++)
+ irq_desc[i].handler = &i8259_pic;
- /* Initialize the default interrupt mapping priorities,
- * in case the boot rom changed something on us.
- */
- immap->im_intctl.ic_sicr = 0;
- immap->im_intctl.ic_scprrh = 0x05309770;
- immap->im_intctl.ic_scprrl = 0x05309770;
+ i8259_init(0);
+#endif
+
+#ifdef CONFIG_CPM2
+ /* Setup CPM2 PIC */
+ cpm2_init_IRQ();
setup_irq(MPC85xx_IRQ_CPM, &cpm2_irqaction);
#endif
- return;
+ return;
}
#ifdef CONFIG_PCI
* interrupt on slot */
{
{ 0, 1, 2, 3 }, /* 16 - PMC */
- { 3, 0, 0, 0 }, /* 17 P2P (Tsi320) */
+ { 0, 1, 2, 3 }, /* 17 P2P (Tsi320) */
{ 0, 1, 2, 3 }, /* 18 - Slot 1 */
{ 1, 2, 3, 0 }, /* 19 - Slot 2 */
{ 2, 3, 0, 1 }, /* 20 - Slot 3 */
}
}
-#define ARCADIA_HOST_BRIDGE_IDSEL 17
-#define ARCADIA_2ND_BRIDGE_IDSEL 3
+#define ARCADIA_HOST_BRIDGE_IDSEL 17
+#define ARCADIA_2ND_BRIDGE_IDSEL 3
extern int mpc85xx_pci1_last_busno;
if (bus == 0 && PCI_SLOT(devfn) == 0)
return PCIBIOS_DEVICE_NOT_FOUND;
#ifdef CONFIG_85xx_PCI2
- if (mpc85xx_pci1_last_busno)
+ if (mpc85xx_pci1_last_busno)
if (bus == (mpc85xx_pci1_last_busno + 1) && PCI_SLOT(devfn) == 0)
return PCIBIOS_DEVICE_NOT_FOUND;
#endif
/* We explicitly do not go past the Tundra 320 Bridge */
- if (bus == 1)
+ if ((bus == 1) && (PCI_SLOT(devfn) == ARCADIA_2ND_BRIDGE_IDSEL))
return PCIBIOS_DEVICE_NOT_FOUND;
if ((bus == 0) && (PCI_SLOT(devfn) == ARCADIA_2ND_BRIDGE_IDSEL))
return PCIBIOS_DEVICE_NOT_FOUND;
else
return PCIBIOS_SUCCESSFUL;
}
+
+void __init
+mpc85xx_cds_enable_via(struct pci_controller *hose)
+{
+ u32 pci_class;
+ u16 vid, did;
+
+ early_read_config_dword(hose, 0, 0x88, PCI_CLASS_REVISION, &pci_class);
+ if ((pci_class >> 16) != PCI_CLASS_BRIDGE_PCI)
+ return;
+
+ /* Configure P2P so that we can reach bus 1 */
+ early_write_config_byte(hose, 0, 0x88, PCI_PRIMARY_BUS, 0);
+ early_write_config_byte(hose, 0, 0x88, PCI_SECONDARY_BUS, 1);
+ early_write_config_byte(hose, 0, 0x88, PCI_SUBORDINATE_BUS, 0xff);
+
+ early_read_config_word(hose, 1, 0x10, PCI_VENDOR_ID, &vid);
+ early_read_config_word(hose, 1, 0x10, PCI_DEVICE_ID, &did);
+
+ if ((vid != PCI_VENDOR_ID_VIA) ||
+ (did != PCI_DEVICE_ID_VIA_82C686))
+ return;
+
+ /* Enable USB and IDE functions */
+ early_write_config_byte(hose, 1, 0x10, 0x48, 0x08);
+}
+
+void __init
+mpc85xx_cds_fixup_via(struct pci_controller *hose)
+{
+ u32 pci_class;
+ u16 vid, did;
+
+ early_read_config_dword(hose, 0, 0x88, PCI_CLASS_REVISION, &pci_class);
+ if ((pci_class >> 16) != PCI_CLASS_BRIDGE_PCI)
+ return;
+
+ /*
+ * Force the backplane P2P bridge to have a window
+ * open from 0x00000000-0x00001fff in PCI I/O space.
+ * This allows legacy I/O (i8259, etc) on the VIA
+ * southbridge to be accessed.
+ */
+ early_write_config_byte(hose, 0, 0x88, PCI_IO_BASE, 0x00);
+ early_write_config_word(hose, 0, 0x88, PCI_IO_BASE_UPPER16, 0x0000);
+ early_write_config_byte(hose, 0, 0x88, PCI_IO_LIMIT, 0x10);
+ early_write_config_word(hose, 0, 0x88, PCI_IO_LIMIT_UPPER16, 0x0000);
+
+ early_read_config_word(hose, 1, 0x10, PCI_VENDOR_ID, &vid);
+ early_read_config_word(hose, 1, 0x10, PCI_DEVICE_ID, &did);
+ if ((vid != PCI_VENDOR_ID_VIA) ||
+ (did != PCI_DEVICE_ID_VIA_82C686))
+ return;
+
+ /*
+ * Since the P2P window was forced to cover the fixed
+ * legacy I/O addresses, it is necessary to manually
+ * place the base addresses for the IDE and USB functions
+ * within this window.
+ */
+ /* Function 1, IDE */
+ early_write_config_dword(hose, 1, 0x11, PCI_BASE_ADDRESS_0, 0x1ff8);
+ early_write_config_dword(hose, 1, 0x11, PCI_BASE_ADDRESS_1, 0x1ff4);
+ early_write_config_dword(hose, 1, 0x11, PCI_BASE_ADDRESS_2, 0x1fe8);
+ early_write_config_dword(hose, 1, 0x11, PCI_BASE_ADDRESS_3, 0x1fe4);
+ early_write_config_dword(hose, 1, 0x11, PCI_BASE_ADDRESS_4, 0x1fd0);
+
+ /* Function 2, USB ports 0-1 */
+ early_write_config_dword(hose, 1, 0x12, PCI_BASE_ADDRESS_4, 0x1fa0);
+
+ /* Function 3, USB ports 2-3 */
+ early_write_config_dword(hose, 1, 0x13, PCI_BASE_ADDRESS_4, 0x1f80);
+
+ /* Function 5, Power Management */
+ early_write_config_dword(hose, 1, 0x15, PCI_BASE_ADDRESS_0, 0x1e00);
+ early_write_config_dword(hose, 1, 0x15, PCI_BASE_ADDRESS_1, 0x1dfc);
+ early_write_config_dword(hose, 1, 0x15, PCI_BASE_ADDRESS_2, 0x1df8);
+
+ /* Function 6, AC97 Interface */
+ early_write_config_dword(hose, 1, 0x16, PCI_BASE_ADDRESS_0, 0x1c00);
+}
+
+void __init
+mpc85xx_cds_pcibios_fixup(void)
+{
+ struct pci_dev *dev = NULL;
+ u_char c;
+
+ if ((dev = pci_find_device(PCI_VENDOR_ID_VIA,
+ PCI_DEVICE_ID_VIA_82C586_1, NULL))) {
+ /*
+ * U-Boot does not set the enable bits
+ * for the IDE device. Force them on here.
+ */
+ pci_read_config_byte(dev, 0x40, &c);
+ c |= 0x03; /* IDE: Chip Enable Bits */
+ pci_write_config_byte(dev, 0x40, c);
+
+ /*
+ * Since only primary interface works, force the
+ * IDE function to standard primary IDE interrupt
+ * w/ 8259 offset
+ */
+ dev->irq = 14;
+ pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq);
+ }
+
+ /*
+ * Force legacy USB interrupt routing
+ */
+ if ((dev = pci_find_device(PCI_VENDOR_ID_VIA,
+ PCI_DEVICE_ID_VIA_82C586_2, NULL))) {
+ dev->irq = 10;
+ pci_write_config_byte(dev, PCI_INTERRUPT_LINE, 10);
+ }
+
+ if ((dev = pci_find_device(PCI_VENDOR_ID_VIA,
+ PCI_DEVICE_ID_VIA_82C586_2, dev))) {
+ dev->irq = 11;
+ pci_write_config_byte(dev, PCI_INTERRUPT_LINE, 11);
+ }
+}
#endif /* CONFIG_PCI */
+TODC_ALLOC();
+
/* ************************************************************************
*
* Setup the architecture
static void __init
mpc85xx_cds_setup_arch(void)
{
- bd_t *binfo = (bd_t *) __res;
- unsigned int freq;
+ bd_t *binfo = (bd_t *) __res;
+ unsigned int freq;
struct gianfar_platform_data *pdata;
- /* get the core frequency */
- freq = binfo->bi_intfreq;
+ /* get the core frequency */
+ freq = binfo->bi_intfreq;
- printk("mpc85xx_cds_setup_arch\n");
+ printk("mpc85xx_cds_setup_arch\n");
#ifdef CONFIG_CPM2
cpm2_reset();
cds_pci_slot = ((cadmus[CM_CSR] >> 6) & 0x3) + 1;
printk("CDS Version = %x in PCI slot %d\n", cadmus[CM_VER], cds_pci_slot);
- /* Set loops_per_jiffy to a half-way reasonable value,
- for use until calibrate_delay gets called. */
- loops_per_jiffy = freq / HZ;
+ /* Setup TODC access */
+ TODC_INIT(TODC_TYPE_DS1743,
+ 0,
+ 0,
+ ioremap(CDS_RTC_ADDR, CDS_RTC_SIZE),
+ 8);
+
+ /* Set loops_per_jiffy to a half-way reasonable value,
+ for use until calibrate_delay gets called. */
+ loops_per_jiffy = freq / HZ;
#ifdef CONFIG_PCI
- /* setup PCI host bridges */
- mpc85xx_setup_hose();
+ /* VIA IDE configuration */
+ ppc_md.pcibios_fixup = mpc85xx_cds_pcibios_fixup;
+
+ /* setup PCI host bridges */
+ mpc85xx_setup_hose();
#endif
#ifdef CONFIG_SERIAL_8250
- mpc85xx_early_serial_map();
+ mpc85xx_early_serial_map();
#endif
#ifdef CONFIG_SERIAL_TEXT_DEBUG
#ifdef CONFIG_BLK_DEV_INITRD
- if (initrd_start)
- ROOT_DEV = Root_RAM0;
- else
+ if (initrd_start)
+ ROOT_DEV = Root_RAM0;
+ else
#endif
#ifdef CONFIG_ROOT_NFS
- ROOT_DEV = Root_NFS;
+ ROOT_DEV = Root_NFS;
#else
- ROOT_DEV = Root_HDA1;
+ ROOT_DEV = Root_HDA1;
#endif
}
platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
unsigned long r6, unsigned long r7)
{
- /* parse_bootinfo must always be called first */
- parse_bootinfo(find_bootinfo());
+ /* parse_bootinfo must always be called first */
+ parse_bootinfo(find_bootinfo());
- /*
- * If we were passed in a board information, copy it into the
- * residual data area.
- */
- if (r3) {
- memcpy((void *) __res, (void *) (r3 + KERNELBASE),
- sizeof (bd_t));
+ /*
+ * If we were passed in a board information, copy it into the
+ * residual data area.
+ */
+ if (r3) {
+ memcpy((void *) __res, (void *) (r3 + KERNELBASE),
+ sizeof (bd_t));
- }
+ }
#ifdef CONFIG_SERIAL_TEXT_DEBUG
{
bd_t *binfo = (bd_t *) __res;
/* Use the last TLB entry to map CCSRBAR to allow access to DUART regs */
settlbcam(NUM_TLBCAMS - 1, binfo->bi_immr_base,
- binfo->bi_immr_base, MPC85xx_CCSRBAR_SIZE, _PAGE_IO, 0);
+ binfo->bi_immr_base, MPC85xx_CCSRBAR_SIZE, _PAGE_IO, 0);
memset(&p, 0, sizeof (p));
p.iotype = SERIAL_IO_MEM;
#endif
#if defined(CONFIG_BLK_DEV_INITRD)
- /*
- * If the init RAM disk has been configured in, and there's a valid
- * starting address for it, set it up.
- */
- if (r4) {
- initrd_start = r4 + KERNELBASE;
- initrd_end = r5 + KERNELBASE;
- }
-#endif /* CONFIG_BLK_DEV_INITRD */
+ /*
+ * If the init RAM disk has been configured in, and there's a valid
+ * starting address for it, set it up.
+ */
+ if (r4) {
+ initrd_start = r4 + KERNELBASE;
+ initrd_end = r5 + KERNELBASE;
+ }
+#endif /* CONFIG_BLK_DEV_INITRD */
- /* Copy the kernel command line arguments to a safe place. */
+ /* Copy the kernel command line arguments to a safe place. */
- if (r6) {
- *(char *) (r7 + KERNELBASE) = 0;
- strcpy(cmd_line, (char *) (r6 + KERNELBASE));
- }
+ if (r6) {
+ *(char *) (r7 + KERNELBASE) = 0;
+ strcpy(cmd_line, (char *) (r6 + KERNELBASE));
+ }
+
+ identify_ppc_sys_by_id(mfspr(SPRN_SVR));
+
+ /* setup the PowerPC module struct */
+ ppc_md.setup_arch = mpc85xx_cds_setup_arch;
+ ppc_md.show_cpuinfo = mpc85xx_cds_show_cpuinfo;
- identify_ppc_sys_by_id(mfspr(SVR));
+ ppc_md.init_IRQ = mpc85xx_cds_init_IRQ;
+ ppc_md.get_irq = openpic_get_irq;
- /* setup the PowerPC module struct */
- ppc_md.setup_arch = mpc85xx_cds_setup_arch;
- ppc_md.show_cpuinfo = mpc85xx_cds_show_cpuinfo;
+ ppc_md.restart = mpc85xx_restart;
+ ppc_md.power_off = mpc85xx_power_off;
+ ppc_md.halt = mpc85xx_halt;
- ppc_md.init_IRQ = mpc85xx_cds_init_IRQ;
- ppc_md.get_irq = openpic_get_irq;
+ ppc_md.find_end_of_memory = mpc85xx_find_end_of_memory;
- ppc_md.restart = mpc85xx_restart;
- ppc_md.power_off = mpc85xx_power_off;
- ppc_md.halt = mpc85xx_halt;
+ ppc_md.calibrate_decr = mpc85xx_calibrate_decr;
- ppc_md.find_end_of_memory = mpc85xx_find_end_of_memory;
+ ppc_md.time_init = todc_time_init;
+ ppc_md.set_rtc_time = todc_set_rtc_time;
+ ppc_md.get_rtc_time = todc_get_rtc_time;
- ppc_md.time_init = NULL;
- ppc_md.set_rtc_time = NULL;
- ppc_md.get_rtc_time = NULL;
- ppc_md.calibrate_decr = mpc85xx_calibrate_decr;
+ ppc_md.nvram_read_val = todc_direct_read_val;
+ ppc_md.nvram_write_val = todc_direct_write_val;
#if defined(CONFIG_SERIAL_8250) && defined(CONFIG_SERIAL_TEXT_DEBUG)
- ppc_md.progress = gen550_progress;
+ ppc_md.progress = gen550_progress;
#endif /* CONFIG_SERIAL_8250 && CONFIG_SERIAL_TEXT_DEBUG */
+#if defined(CONFIG_SERIAL_8250) && defined(CONFIG_KGDB)
+ ppc_md.early_serial_map = mpc85xx_early_serial_map;
+#endif /* CONFIG_SERIAL_8250 && CONFIG_KGDB */
- if (ppc_md.progress)
- ppc_md.progress("mpc85xx_cds_init(): exit", 0);
+ if (ppc_md.progress)
+ ppc_md.progress("mpc85xx_cds_init(): exit", 0);
- return;
+ return;
}
git://git.onelab.eu / linux-2.6.git / blobdiff