/*
- * arch/ppc/platforms/85xx/sbc8560.c
- *
* Wind River SBC8560 board specific routines
*
- * Maintainer: Kumar Gala <kumar.gala@freescale.com>
+ * Maintainer: Kumar Gala
*
* Copyright 2004 Freescale Semiconductor Inc.
*
#include <linux/major.h>
#include <linux/console.h>
#include <linux/delay.h>
-#include <linux/irq.h>
#include <linux/seq_file.h>
#include <linux/root_dev.h>
#include <linux/serial.h>
#include <asm/time.h>
#include <asm/io.h>
#include <asm/machdep.h>
-#include <asm/prom.h>
#include <asm/open_pic.h>
#include <asm/bootinfo.h>
#include <asm/pci-bridge.h>
uart_req.irq = MPC85xx_IRQ_EXT9;
uart_req.flags = STD_COM_FLAGS;
uart_req.uartclk = BASE_BAUD * 16;
- uart_req.iotype = SERIAL_IO_MEM;
+ uart_req.iotype = UPIO_MEM;
uart_req.mapbase = UARTA_ADDR;
uart_req.membase = ioremap(uart_req.mapbase, MPC85xx_UART0_SIZE);
uart_req.type = PORT_16650;
bd_t *binfo = (bd_t *) __res;
unsigned int freq;
struct gianfar_platform_data *pdata;
+ struct gianfar_mdio_data *mdata;
/* get the core frequency */
freq = binfo->bi_intfreq;
#ifdef CONFIG_SERIAL_TEXT_DEBUG
/* Invalidate the entry we stole earlier the serial ports
* should be properly mapped */
- invalidate_tlbcam_entry(NUM_TLBCAMS - 1);
+ invalidate_tlbcam_entry(num_tlbcam_entries - 1);
#endif
+ /* setup the board related info for the MDIO bus */
+ mdata = (struct gianfar_mdio_data *) ppc_sys_get_pdata(MPC85xx_MDIO);
+
+ mdata->irq[25] = MPC85xx_IRQ_EXT6;
+ mdata->irq[26] = MPC85xx_IRQ_EXT7;
+ mdata->irq[31] = -1;
+
/* setup the board related information for the enet controllers */
pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC85xx_TSEC1);
- pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR;
- pdata->interruptPHY = MPC85xx_IRQ_EXT6;
- pdata->phyid = 25;
- /* fixup phy address */
- pdata->phy_reg_addr += binfo->bi_immr_base;
- memcpy(pdata->mac_addr, binfo->bi_enetaddr, 6);
+ if (pdata) {
+ pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR;
+ pdata->bus_id = 0;
+ pdata->phy_id = 25;
+ memcpy(pdata->mac_addr, binfo->bi_enetaddr, 6);
+ }
pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC85xx_TSEC2);
- pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR;
- pdata->interruptPHY = MPC85xx_IRQ_EXT7;
- pdata->phyid = 26;
- /* fixup phy address */
- pdata->phy_reg_addr += binfo->bi_immr_base;
- memcpy(pdata->mac_addr, binfo->bi_enet1addr, 6);
+ if (pdata) {
+ pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR;
+ pdata->bus_id = 0;
+ pdata->phy_id = 26;
+ memcpy(pdata->mac_addr, binfo->bi_enet1addr, 6);
+ }
#ifdef CONFIG_BLK_DEV_INITRD
if (initrd_start)
#ifdef CONFIG_SERIAL_TEXT_DEBUG
/* Use the last TLB entry to map CCSRBAR to allow access to DUART regs */
- settlbcam(NUM_TLBCAMS - 1, UARTA_ADDR,
+ settlbcam(num_tlbcam_entries - 1, UARTA_ADDR,
UARTA_ADDR, 0x1000, _PAGE_IO, 0);
#endif