#include <linux/serial_core.h>
#include <linux/initrd.h>
#include <linux/module.h>
+#include <linux/fsl_devices.h>
#include <asm/system.h>
#include <asm/pgtable.h>
#include <asm/irq.h>
#include <asm/immap_85xx.h>
#include <asm/kgdb.h>
-#include <asm/ocp.h>
+#include <asm/ppc_sys.h>
#include <mm/mmu_decl.h>
#include <syslib/ppc85xx_common.h>
#include <syslib/ppc85xx_setup.h>
-struct ocp_gfar_data mpc85xx_tsec1_def = {
- .interruptTransmit = MPC85xx_IRQ_TSEC1_TX,
- .interruptError = MPC85xx_IRQ_TSEC1_ERROR,
- .interruptReceive = MPC85xx_IRQ_TSEC1_RX,
- .interruptPHY = MPC85xx_IRQ_EXT6,
- .flags = (GFAR_HAS_GIGABIT | GFAR_HAS_MULTI_INTR | GFAR_HAS_PHY_INTR),
- .phyid = 25,
- .phyregidx = 0,
-};
-
-struct ocp_gfar_data mpc85xx_tsec2_def = {
- .interruptTransmit = MPC85xx_IRQ_TSEC2_TX,
- .interruptError = MPC85xx_IRQ_TSEC2_ERROR,
- .interruptReceive = MPC85xx_IRQ_TSEC2_RX,
- .interruptPHY = MPC85xx_IRQ_EXT7,
- .flags = (GFAR_HAS_GIGABIT | GFAR_HAS_MULTI_INTR | GFAR_HAS_PHY_INTR),
- .phyid = 26,
- .phyregidx = 0,
-};
-
-struct ocp_fs_i2c_data mpc85xx_i2c1_def = {
- .flags = FS_I2C_SEPARATE_DFSRR,
-};
-
-
#ifdef CONFIG_SERIAL_8250
static void __init
sbc8560_early_serial_map(void)
static void __init
sbc8560_setup_arch(void)
{
- struct ocp_def *def;
- struct ocp_gfar_data *einfo;
bd_t *binfo = (bd_t *) __res;
unsigned int freq;
+ struct gianfar_platform_data *pdata;
/* get the core frequency */
freq = binfo->bi_intfreq;
invalidate_tlbcam_entry(NUM_TLBCAMS - 1);
#endif
- /* Set up MAC addresses for the Ethernet devices */
- def = ocp_get_one_device(OCP_VENDOR_FREESCALE, OCP_FUNC_GFAR, 0);
- if (def) {
- einfo = (struct ocp_gfar_data *) def->additions;
- memcpy(einfo->mac_addr, binfo->bi_enetaddr, 6);
- }
-
- def = ocp_get_one_device(OCP_VENDOR_FREESCALE, OCP_FUNC_GFAR, 1);
- if (def) {
- einfo = (struct ocp_gfar_data *) def->additions;
- memcpy(einfo->mac_addr, binfo->bi_enet1addr, 6);
- }
+ /* setup the board related information for the enet controllers */
+ pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC85xx_TSEC1);
+ pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR;
+ pdata->interruptPHY = MPC85xx_IRQ_EXT6;
+ pdata->phyid = 25;
+ /* fixup phy address */
+ pdata->phy_reg_addr += binfo->bi_immr_base;
+ memcpy(pdata->mac_addr, binfo->bi_enetaddr, 6);
+
+ pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC85xx_TSEC2);
+ pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR;
+ pdata->interruptPHY = MPC85xx_IRQ_EXT7;
+ pdata->phyid = 26;
+ /* fixup phy address */
+ pdata->phy_reg_addr += binfo->bi_immr_base;
+ memcpy(pdata->mac_addr, binfo->bi_enet1addr, 6);
#ifdef CONFIG_BLK_DEV_INITRD
if (initrd_start)
#else
ROOT_DEV = Root_HDA1;
#endif
-
- ocp_for_each_device(mpc85xx_update_paddr_ocp, &(binfo->bi_immr_base));
}
/* ************************************************************************ */
strcpy(cmd_line, (char *) (r6 + KERNELBASE));
}
+ identify_ppc_sys_by_id(mfspr(SVR));
+
/* setup the PowerPC module struct */
ppc_md.setup_arch = sbc8560_setup_arch;
ppc_md.show_cpuinfo = sbc8560_show_cpuinfo;