/*
- * arch/ppc/kernel/setup.c
- *
* Copyright (C) 1995 Linus Torvalds
* Adapted from 'alpha' version by Gary Thomas
* Modified by Cort Dougan (cort@cs.nmt.edu)
#include <linux/seq_file.h>
#include <linux/root_dev.h>
+#if defined(CONFIG_MTD) && defined(CONFIG_MTD_PHYSMAP)
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/map.h>
+#endif
+
#include <asm/mmu.h>
#include <asm/reg.h>
#include <asm/residual.h>
#include <asm/bootinfo.h>
#include <asm/time.h>
#include <asm/xmon.h>
+#include <asm/ppc_sys.h>
#include "ppc8xx_pic.h"
+#ifdef CONFIG_MTD_PHYSMAP
+#define MPC8xxADS_BANK_WIDTH 4
+#endif
+
+#define MPC8xxADS_U_BOOT_SIZE 0x80000
+#define MPC8xxADS_FREE_AREA_OFFSET MPC8xxADS_U_BOOT_SIZE
+
+#if defined(CONFIG_MTD_PARTITIONS)
+ /*
+ NOTE: bank width and interleave relative to the installed flash
+ should have been chosen within MTD_CFI_GEOMETRY options.
+ */
+static struct mtd_partition mpc8xxads_partitions[] = {
+ {
+ .name = "bootloader",
+ .size = MPC8xxADS_U_BOOT_SIZE,
+ .offset = 0,
+ .mask_flags = MTD_WRITEABLE, /* force read-only */
+ }, {
+ .name = "User FS",
+ .offset = MPC8xxADS_FREE_AREA_OFFSET
+ }
+};
+
+#define mpc8xxads_part_num (sizeof (mpc8xxads_partitions) / sizeof (mpc8xxads_partitions[0]))
+
+#endif
+
static int m8xx_set_rtc_time(unsigned long time);
static unsigned long m8xx_get_rtc_time(void);
void m8xx_calibrate_decr(void);
extern void m8xx_ide_init(void);
extern unsigned long find_available_memory(void);
-extern void m8xx_cpm_reset(uint cpm_page);
+extern void m8xx_cpm_reset(void);
extern void m8xx_wdt_handler_install(bd_t *bp);
extern void rpxfb_alloc_pages(void);
extern void cpm_interrupt_init(void);
void __init
m8xx_setup_arch(void)
{
- int cpm_page;
-
- cpm_page = (int) alloc_bootmem_pages(PAGE_SIZE);
+#if defined(CONFIG_MTD) && defined(CONFIG_MTD_PHYSMAP)
+ bd_t *binfo = (bd_t *)__res;
+#endif
/* Reset the Communication Processor Module.
*/
- m8xx_cpm_reset(cpm_page);
+ m8xx_cpm_reset();
#ifdef CONFIG_FB_RPX
rpxfb_alloc_pages();
}
#endif
#endif
+
+#if defined (CONFIG_MPC86XADS) || defined (CONFIG_MPC885ADS)
+#if defined(CONFIG_MTD_PHYSMAP)
+ physmap_configure(binfo->bi_flashstart, binfo->bi_flashsize,
+ MPC8xxADS_BANK_WIDTH, NULL);
+#ifdef CONFIG_MTD_PARTITIONS
+ physmap_set_partitions(mpc8xxads_partitions, mpc8xxads_part_num);
+#endif /* CONFIG_MTD_PARTITIONS */
+#endif /* CONFIG_MTD_PHYSMAP */
+#endif
+
board_init();
}
.name = "tbint",
};
+/* per-board overridable init_internal_rtc() function. */
+void __init __attribute__ ((weak))
+init_internal_rtc(void)
+{
+ /* Disable the RTC one second and alarm interrupts. */
+ clrbits16(&((immap_t *)IMAP_ADDR)->im_sit.sit_rtcsc, (RTCSC_SIE | RTCSC_ALE));
+
+ /* Enable the RTC */
+ setbits16(&((immap_t *)IMAP_ADDR)->im_sit.sit_rtcsc, (RTCSC_RTF | RTCSC_RTE));
+
+}
+
/* The decrementer counts at the system (internal) clock frequency divided by
* sixteen, or external oscillator divided by four. We force the processor
* to use system clock divided by sixteen.
int freq, fp, divisor;
/* Unlock the SCCR. */
- ((volatile immap_t *)IMAP_ADDR)->im_clkrstk.cark_sccrk = ~KAPWR_KEY;
- ((volatile immap_t *)IMAP_ADDR)->im_clkrstk.cark_sccrk = KAPWR_KEY;
+ out_be32(&((immap_t *)IMAP_ADDR)->im_clkrstk.cark_sccrk, ~KAPWR_KEY);
+ out_be32(&((immap_t *)IMAP_ADDR)->im_clkrstk.cark_sccrk, KAPWR_KEY);
/* Force all 8xx processors to use divide by 16 processor clock. */
- ((volatile immap_t *)IMAP_ADDR)->im_clkrst.car_sccr |= 0x02000000;
-
+ setbits32(&((immap_t *)IMAP_ADDR)->im_clkrst.car_sccr, 0x02000000);
/* Processor frequency is MHz.
* The value 'fp' is the number of decrementer ticks per second.
*/
* we guarantee the registers are locked, then we unlock them
* for our use.
*/
- ((volatile immap_t *)IMAP_ADDR)->im_sitk.sitk_tbscrk = ~KAPWR_KEY;
- ((volatile immap_t *)IMAP_ADDR)->im_sitk.sitk_rtcsck = ~KAPWR_KEY;
- ((volatile immap_t *)IMAP_ADDR)->im_sitk.sitk_tbk = ~KAPWR_KEY;
- ((volatile immap_t *)IMAP_ADDR)->im_sitk.sitk_tbscrk = KAPWR_KEY;
- ((volatile immap_t *)IMAP_ADDR)->im_sitk.sitk_rtcsck = KAPWR_KEY;
- ((volatile immap_t *)IMAP_ADDR)->im_sitk.sitk_tbk = KAPWR_KEY;
+ out_be32(&((immap_t *)IMAP_ADDR)->im_sitk.sitk_tbscrk, ~KAPWR_KEY);
+ out_be32(&((immap_t *)IMAP_ADDR)->im_sitk.sitk_rtcsck, ~KAPWR_KEY);
+ out_be32(&((immap_t *)IMAP_ADDR)->im_sitk.sitk_tbk, ~KAPWR_KEY);
+ out_be32(&((immap_t *)IMAP_ADDR)->im_sitk.sitk_tbscrk, KAPWR_KEY);
+ out_be32(&((immap_t *)IMAP_ADDR)->im_sitk.sitk_rtcsck, KAPWR_KEY);
+ out_be32(&((immap_t *)IMAP_ADDR)->im_sitk.sitk_tbk, KAPWR_KEY);
- /* Disable the RTC one second and alarm interrupts. */
- ((volatile immap_t *)IMAP_ADDR)->im_sit.sit_rtcsc &=
- ~(RTCSC_SIE | RTCSC_ALE);
- /* Enable the RTC */
- ((volatile immap_t *)IMAP_ADDR)->im_sit.sit_rtcsc |=
- (RTCSC_RTF | RTCSC_RTE);
+ init_internal_rtc();
/* Enabling the decrementer also enables the timebase interrupts
* (or from the other point of view, to get decrementer interrupts
* we have to enable the timebase). The decrementer interrupt
* is wired into the vector table, nothing to do here for that.
*/
- ((volatile immap_t *)IMAP_ADDR)->im_sit.sit_tbscr =
- ((mk_int_int_mask(DEC_INTERRUPT) << 8) |
- (TBSCR_TBF | TBSCR_TBE));
+ out_be16(&((immap_t *)IMAP_ADDR)->im_sit.sit_tbscr, (mk_int_int_mask(DEC_INTERRUPT) << 8) | (TBSCR_TBF | TBSCR_TBE));
if (setup_irq(DEC_INTERRUPT, &tbint_irqaction))
panic("Could not allocate timer IRQ!");
static int
m8xx_set_rtc_time(unsigned long time)
{
- ((volatile immap_t *)IMAP_ADDR)->im_sitk.sitk_rtck = KAPWR_KEY;
- ((volatile immap_t *)IMAP_ADDR)->im_sit.sit_rtc = time;
- ((volatile immap_t *)IMAP_ADDR)->im_sitk.sitk_rtck = ~KAPWR_KEY;
+ out_be32(&((immap_t *)IMAP_ADDR)->im_sitk.sitk_rtck, KAPWR_KEY);
+ out_be32(&((immap_t *)IMAP_ADDR)->im_sit.sit_rtc, time);
+ out_be32(&((immap_t *)IMAP_ADDR)->im_sitk.sitk_rtck, ~KAPWR_KEY);
return(0);
}
m8xx_get_rtc_time(void)
{
/* Get time from the RTC. */
- return((unsigned long)(((immap_t *)IMAP_ADDR)->im_sit.sit_rtc));
+ return (unsigned long) in_be32(&((immap_t *)IMAP_ADDR)->im_sit.sit_rtc);
}
static void
__volatile__ unsigned char dummy;
local_irq_disable();
- ((immap_t *)IMAP_ADDR)->im_clkrst.car_plprcr |= 0x00000080;
+ setbits32(&((immap_t *)IMAP_ADDR)->im_clkrst.car_plprcr, 0x00000080);
/* Clear the ME bit in MSR to cause checkstop on machine check
*/
mtmsr(mfmsr() & ~0x1000);
- dummy = ((immap_t *)IMAP_ADDR)->im_clkrst.res[0];
+ dummy = in_8(&((immap_t *)IMAP_ADDR)->im_clkrst.res[0]);
printk("Restart failed\n");
while(1);
}
bp = (bd_t *)__res;
- seq_printf(m, "clock\t\t: %ldMHz\n"
- "bus clock\t: %ldMHz\n",
+ seq_printf(m, "clock\t\t: %uMHz\n"
+ "bus clock\t: %uMHz\n",
bp->bi_intfreq / 1000000,
bp->bi_busfreq / 1000000);
i8259_init(0);
/* The i8259 cascade interrupt must be level sensitive. */
- ((immap_t *)IMAP_ADDR)->im_siu_conf.sc_siel &=
- ~(0x80000000 >> ISA_BRIDGE_INT);
+ clrbits32(&((immap_t *)IMAP_ADDR)->im_siu_conf.sc_siel, (0x80000000 >> ISA_BRIDGE_INT));
if (setup_irq(ISA_BRIDGE_INT, &mbx_i8259_irqaction))
enable_irq(ISA_BRIDGE_INT);
#endif /* CONFIG_PCI */
strcpy(cmd_line, (char *)(r6+KERNELBASE));
}
+ identify_ppc_sys_by_name(BOARD_CHIP_NAME);
+
ppc_md.setup_arch = m8xx_setup_arch;
ppc_md.show_percpuinfo = m8xx_show_percpuinfo;
- ppc_md.irq_canonicalize = NULL;
ppc_md.init_IRQ = m8xx_init_IRQ;
ppc_md.get_irq = m8xx_get_irq;
ppc_md.init = NULL;
ppc_md.find_end_of_memory = m8xx_find_end_of_memory;
ppc_md.setup_io_mappings = m8xx_map_io;
-#if defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_IDE_MODULE)
+#if defined(CONFIG_BLK_DEV_MPC8xx_IDE)
m8xx_ide_init();
#endif
}
git://git.onelab.eu / linux-2.6.git / blobdiff