config RWSEM_XCHGADD_ALGORITHM
bool
+config GENERIC_CALIBRATE_DELAY
+ bool
+ default y
+
source "init/Kconfig"
menu "System type"
bool "SolutionEngine"
help
Select SolutionEngine if configuring for a Hitachi SH7709
- or SH7750 evalutation board.
+ or SH7750 evaluation board.
config SH_7751_SOLUTION_ENGINE
bool "SolutionEngine7751"
help
Select 7751 SolutionEngine if configuring for a Hitachi SH7751
- evalutation board.
+ evaluation board.
config SH_7300_SOLUTION_ENGINE
bool "SolutionEngine7300"
help
Select 7300 SolutionEngine if configuring for a Hitachi SH7300(SH-Mobile V)
- evalutation board.
+ evaluation board.
+
+config SH_73180_SOLUTION_ENGINE
+ bool "SolutionEngine73180"
+ help
+ Select 73180 SolutionEngine if configuring for a Hitachi SH73180(SH-Mobile 3)
+ evaluation board.
config SH_7751_SYSTEMH
bool "SystemH7751R"
config SH_MPC1211
bool "MPC1211"
+config SH_SH03
+ bool "SH03"
+ help
+ CTP/PCI-SH03 is a CPU module computer that produced
+ by Interface Corporation.
+ It is compact and excellent in durability.
+ It will play an active part in your factory or laboratory
+ as a FA computer.
+ More information at <http://www.interface.co.jp>
+
config SH_SECUREEDGE5410
bool "SecureEdge5410"
help
Select RTS7751R2D if configuring for a Renesas Technology
Sales SH-Graphics board.
+config SH_EDOSK7705
+ bool "EDOSK7705"
+
+config SH_SH4202_MICRODEV
+ bool "SH4-202 MicroDev"
+ help
+ Select SH4-202 MicroDev if configuring for a SuperH MicroDev board
+ with an SH4-202 CPU.
+
config SH_UNKNOWN
bool "BareCPU"
help
bool "SH7760"
depends on CPU_SH4
+config CPU_SUBTYPE_SH73180
+ bool "SH73180"
+ depends on CPU_SH4
+
config CPU_SUBTYPE_ST40STB1
bool "ST40STB1 / ST40RA"
depends on CPU_SH4
help
Select ST40GX1 if you have a ST40GX1 CPU.
+config CPU_SUBTYPE_SH4_202
+ bool "SH4-202"
+ depends on CPU_SH4
+
endchoice
+config SH7705_CACHE_32KB
+ bool "Enable 32KB cache size for SH7705"
+ depends on CPU_SUBTYPE_SH7705
+ default y
+
config MMU
bool "Support for memory management hardware"
depends on !CPU_SH2
# Platform-specific memory start and size definitions
config MEMORY_START
hex "Physical memory start address" if !MEMORY_SET || MEMORY_OVERRIDE
- default "0x08000000" if !MEMORY_SET || MEMORY_OVERRIDE || !MEMORY_OVERRIDE && SH_ADX || SH_MPC1211 || SH_SECUREEDGE5410
- default "0x0c000000" if !MEMORY_OVERRIDE && (SH_DREAMCAST || SH_HP600 || SH_BIGSUR || SH_SH2000 || SH_7751_SOLUTION_ENGINE || SH_SOLUTION_ENGINE || SH_HS7751RVOIP || SH_RTS7751R2D)
+ default "0x08000000" if !MEMORY_SET || MEMORY_OVERRIDE || !MEMORY_OVERRIDE && SH_ADX || SH_MPC1211 || SH_SH03 || SH_SECUREEDGE5410 || SH_SH4202_MICRODEV
+ default "0x0c000000" if !MEMORY_OVERRIDE && (SH_DREAMCAST || SH_HP600 || SH_BIGSUR || SH_SH2000 || SH_73180_SOLUTION_ENGINE || SH_7300_SOLUTION_ENGINE || SH_7751_SOLUTION_ENGINE || SH_SOLUTION_ENGINE || SH_HS7751RVOIP || SH_RTS7751R2D || SH_EDOSK7705)
---help---
Computers built with Hitachi SuperH processors always
map the ROM starting at address zero. But the processor
config MEMORY_SIZE
hex "Physical memory size" if !MEMORY_SET || MEMORY_OVERRIDE
default "0x00400000" if !MEMORY_SET || MEMORY_OVERRIDE || !MEMORY_OVERRIDE && SH_ADX || !MEMORY_OVERRIDE && (SH_HP600 || SH_BIGSUR || SH_SH2000)
- default "0x01000000" if !MEMORY_OVERRIDE && SH_DREAMCAST || SH_SECUREEDGE5410
- default "0x04000000" if !MEMORY_OVERRIDE && (SH_7751_SOLUTION_ENGINE || SH_HS7751RVOIP || SH_RTS7751R2D)
- default "0x02000000" if !MEMORY_OVERRIDE && SH_SOLUTION_ENGINE
- default "0x08000000" if SH_MPC1211
+ default "0x01000000" if !MEMORY_OVERRIDE && SH_DREAMCAST || SH_SECUREEDGE5410 || SH_EDOSK7705
+ default "0x02000000" if !MEMORY_OVERRIDE && (SH_73180_SOLUTION_ENGINE || SH_SOLUTION_ENGINE)
+ default "0x04000000" if !MEMORY_OVERRIDE && (SH_7300_SOLUTION_ENGINE || SH_7751_SOLUTION_ENGINE || SH_HS7751RVOIP || SH_RTS7751R2D || SH_SH4202_MICRODEV)
+ default "0x08000000" if SH_MPC1211 || SH_SH03
help
This sets the default memory size assumed by your SH kernel. It can
be overridden as normal by the 'mem=' argument on the kernel command
config MEMORY_SET
bool
- depends on !MEMORY_OVERRIDE && (SH_MPC1211 || SH_ADX || SH_DREAMCAST || SH_HP600 || SH_BIGSUR || SH_SH2000 || SH_7751_SOLUTION_ENGINE || SH_SOLUTION_ENGINE || SH_SECUREEDGE5410 || SH_HS7751RVOIP || SH_RTS7751R2D)
+ depends on !MEMORY_OVERRIDE && (SH_MPC1211 || SH_SH03 || SH_ADX || SH_DREAMCAST || SH_HP600 || SH_BIGSUR || SH_SH2000 || SH_7751_SOLUTION_ENGINE || SH_SOLUTION_ENGINE || SH_SECUREEDGE5410 || SH_HS7751RVOIP || SH_RTS7751R2D || SH_SH4202_MICRODEV || SH_EDOSK7705)
default y
help
This is an option about which you will never be asked a question.
# XXX: break these out into the board-specific configs below
config CF_ENABLER
bool "Compact Flash Enabler support"
- depends on SH_ADX || SH_SOLUTION_ENGINE || SH_UNKNOWN || SH_CAT68701
+ depends on SH_ADX || SH_SOLUTION_ENGINE || SH_UNKNOWN || SH_CAT68701 || SH_SH03
---help---
Compact Flash is a small, removable mass storage device introduced
in 1994 originally as a PCMCIA device. If you say `Y' here, you
# The SH7750 RTC module is disabled in the Dreamcast
config SH_RTC
bool
- depends on !SH_DREAMCAST && !SH_SATURN && !SH_7300_SOLUTION_ENGINE
+ depends on !SH_DREAMCAST && !SH_SATURN && !SH_7300_SOLUTION_ENGINE && !SH_73180_SOLUTION_ENGINE
default y
help
Selecting this option will allow the Linux kernel to emulate
If unsure, say N.
+config SH_FPU
+ bool "FPU support"
+ depends on !CPU_SH3
+ default y
+ help
+ Selecting this option will enable support for SH processors that
+ have FPU units (ie, SH77xx).
+
+ This option must be set in order to enable the FPU.
+
config SH_DSP
bool "DSP support"
depends on !CPU_SH4
config ZERO_PAGE_OFFSET
hex "Zero page offset"
- default "0x00001000" if !SH_MPC1211
- default "0x00004000" if SH_MPC1211
+ default "0x00001000" if !(SH_MPC1211 || SH_SH03)
+ default "0x00004000" if SH_MPC1211 || SH_SH03
help
This sets the default offset of zero page.
config SH_PCLK_CALC
bool
- default n if CPU_SUBTYPE_SH7300
+ default n if CPU_SUBTYPE_SH7300 || CPU_SUBTYPE_SH73180
default y
help
This option will cause the PCLK value to be probed at run-time. It
config SH_PCLK_FREQ
int "Peripheral clock frequency (in Hz)"
- default "49876504" if CPU_SUBTYPE_SH7750
- default "60013568" if CPU_SUBTYPE_SH7751
+ default "50000000" if CPU_SUBTYPE_SH7750
+ default "60000000" if CPU_SUBTYPE_SH7751
default "33333333" if CPU_SUBTYPE_SH7300
+ default "27000000" if CPU_SUBTYPE_SH73180
+ default "66000000" if CPU_SUBTYPE_SH4_202
default "1193182"
help
This option is used to specify the peripheral clock frequency. This
menu "CPU Frequency scaling"
-config CPU_FREQ
- bool "CPU Frequency scaling"
- help
- CPU clock scaling allows you to change the clock speed of the
- running CPU on the fly.
-
- For details, take a look at <file:Documentation/cpu-freq>.
-
- If unsure, say N.
-
source "drivers/cpufreq/Kconfig"
config CPU_FREQ_TABLE
config HEARTBEAT
bool "Heartbeat LED"
- depends on SH_MPC1211 || SH_CAT68701 || SH_STB1_HARP || SH_STB1_OVERDRIVE || SH_BIGSUR || SH_7751_SOLUTION_ENGINE || SH_7300_SOLUTION_ENGINE || SH_SOLUTION_ENGINE || SH_RTS7751R2D
+ depends on SH_MPC1211 || SH_SH03 || SH_CAT68701 || SH_STB1_HARP || SH_STB1_OVERDRIVE || SH_BIGSUR || SH_7751_SOLUTION_ENGINE || SH_7300_SOLUTION_ENGINE || SH_73180_SOLUTION_ENGINE || SH_SOLUTION_ENGINE || SH_RTS7751R2D || SH_SH4202_MICRODEV
help
Use the power-on LED on your machine as a load meter. The exact
behavior is platform-dependent, but normally the flash frequency is
# PCMCIA outright. -- PFM.
config ISA
bool
- default y if PCMCIA
+ default y if PCMCIA || SMC91X
help
Find out whether you have ISA slots on your motherboard. ISA is the
name of a bus system, i.e. the way the CPU talks to the other stuff
endmenu
+
menu "Executable file formats"
source "fs/Kconfig.binfmt"
default "ramdisk.gz"
help
This is the filename of the ramdisk image to be built into the
- kernel. Relative pathnames are relative to arch/mips/ramdisk/.
+ kernel. Relative pathnames are relative to arch/sh/ramdisk/.
The ramdisk image is not part of the kernel distribution; you must
provide one yourself.
git://git.onelab.eu / linux-2.6.git / blobdiff