#include <linux/linkage.h>
#include <linux/threads.h>
+#include <linux/init.h>
#include <asm/desc.h>
#include <asm/segment.h>
#include <asm/page.h>
*/
.text
+ .section .bootstrap.text
.code32
.globl startup_32
/* %bx: 1 if coming from smp trampoline on secondary cpu */
movl %eax, %cr4
/* Setup early boot stage 4 level pagetables */
- movl $(init_level4_pgt - __START_KERNEL_map), %eax
+ movl $(boot_level4_pgt - __START_KERNEL_map), %eax
movl %eax, %cr3
/* Setup EFER (Extended Feature Enable Register) */
movq %rax, %cr4
/* Setup early boot stage 4 level pagetables. */
- movq $(init_level4_pgt - __START_KERNEL_map), %rax
+ movq $(boot_level4_pgt - __START_KERNEL_map), %rax
movq %rax, %cr3
/* Check if nx is implemented */
wrmsr
/* Setup cr0 */
- xorq %rax, %rax
- btsq $31, %rax /* Enable paging */
- btsq $0, %rax /* Enable protected mode */
- btsq $1, %rax /* Enable MP */
- btsq $4, %rax /* Enable ET */
- btsq $5, %rax /* Enable NE */
- btsq $16, %rax /* Enable WP */
- btsq $18, %rax /* Enable AM */
+#define CR0_PM 1 /* protected mode */
+#define CR0_MP (1<<1)
+#define CR0_ET (1<<4)
+#define CR0_NE (1<<5)
+#define CR0_WP (1<<16)
+#define CR0_AM (1<<18)
+#define CR0_PAGING (1<<31)
+ movl $CR0_PM|CR0_MP|CR0_ET|CR0_NE|CR0_WP|CR0_AM|CR0_PAGING,%eax
/* Make changes effective */
movq %rax, %cr0
movq initial_code(%rip),%rax
jmp *%rax
- /* SMP bootup changes these two */
+ /* SMP bootup changes these two */
+ .align 8
.globl initial_code
initial_code:
.quad x86_64_start_kernel
cmpl $2,early_recursion_flag(%rip)
jz 1f
call dump_stack
+#ifdef CONFIG_KALLSYMS
+ leaq early_idt_ripmsg(%rip),%rdi
+ movq 8(%rsp),%rsi # get rip again
+ call __print_symbol
+#endif
1: hlt
jmp 1b
early_recursion_flag:
early_idt_msg:
.asciz "PANIC: early exception rip %lx error %lx cr2 %lx\n"
+early_idt_ripmsg:
+ .asciz "RIP %s\n"
.code32
ENTRY(no_long_mode)
.org 0xf00
.globl pGDT32
pGDT32:
- .word gdt_end-cpu_gdt_table
+ .word gdt_end-cpu_gdt_table-1
.long cpu_gdt_table-__START_KERNEL_map
.org 0xf10
ENTRY(stext)
ENTRY(_stext)
- /*
- * This default setting generates an ident mapping at address 0x100000
- * and a mapping for the kernel that precisely maps virtual address
- * 0xffffffff80000000 to physical address 0x000000. (always using
- * 2Mbyte large pages provided by PAE mode)
- */
-.org 0x1000
-ENTRY(init_level4_pgt)
- .quad 0x0000000000102007 /* -> level3_ident_pgt */
- .fill 255,8,0
- .quad 0x000000000010a007
- .fill 254,8,0
- /* (2^48-(2*1024*1024*1024))/(2^39) = 511 */
- .quad 0x0000000000103007 /* -> level3_kernel_pgt */
+ $page = 0
+#define NEXT_PAGE(name) \
+ $page = $page + 1; \
+ .org $page * 0x1000; \
+ phys_/**/name = $page * 0x1000 + __PHYSICAL_START; \
+ENTRY(name)
-.org 0x2000
-ENTRY(level3_ident_pgt)
- .quad 0x0000000000104007
+NEXT_PAGE(init_level4_pgt)
+ /* This gets initialized in x86_64_start_kernel */
+ .fill 512,8,0
+
+NEXT_PAGE(level3_ident_pgt)
+ .quad phys_level2_ident_pgt | 0x007
.fill 511,8,0
-.org 0x3000
-ENTRY(level3_kernel_pgt)
+NEXT_PAGE(level3_kernel_pgt)
.fill 510,8,0
/* (2^48-(2*1024*1024*1024)-((2^39)*511))/(2^30) = 510 */
- .quad 0x0000000000105007 /* -> level2_kernel_pgt */
+ .quad phys_level2_kernel_pgt | 0x007
.fill 1,8,0
-.org 0x4000
-ENTRY(level2_ident_pgt)
+NEXT_PAGE(level2_ident_pgt)
/* 40MB for bootup. */
- .quad 0x0000000000000283
- .quad 0x0000000000200183
- .quad 0x0000000000400183
- .quad 0x0000000000600183
- .quad 0x0000000000800183
- .quad 0x0000000000A00183
- .quad 0x0000000000C00183
- .quad 0x0000000000E00183
- .quad 0x0000000001000183
- .quad 0x0000000001200183
- .quad 0x0000000001400183
- .quad 0x0000000001600183
- .quad 0x0000000001800183
- .quad 0x0000000001A00183
- .quad 0x0000000001C00183
- .quad 0x0000000001E00183
- .quad 0x0000000002000183
- .quad 0x0000000002200183
- .quad 0x0000000002400183
- .quad 0x0000000002600183
+ i = 0
+ .rept 20
+ .quad i << 21 | 0x083
+ i = i + 1
+ .endr
/* Temporary mappings for the super early allocator in arch/x86_64/mm/init.c */
.globl temp_boot_pmds
temp_boot_pmds:
.fill 492,8,0
-.org 0x5000
-ENTRY(level2_kernel_pgt)
+NEXT_PAGE(level2_kernel_pgt)
/* 40MB kernel mapping. The kernel code cannot be bigger than that.
When you change this change KERNEL_TEXT_SIZE in page.h too. */
/* (2^48-(2*1024*1024*1024)-((2^39)*511)-((2^30)*510)) = 0 */
- .quad 0x0000000000000183
- .quad 0x0000000000200183
- .quad 0x0000000000400183
- .quad 0x0000000000600183
- .quad 0x0000000000800183
- .quad 0x0000000000A00183
- .quad 0x0000000000C00183
- .quad 0x0000000000E00183
- .quad 0x0000000001000183
- .quad 0x0000000001200183
- .quad 0x0000000001400183
- .quad 0x0000000001600183
- .quad 0x0000000001800183
- .quad 0x0000000001A00183
- .quad 0x0000000001C00183
- .quad 0x0000000001E00183
- .quad 0x0000000002000183
- .quad 0x0000000002200183
- .quad 0x0000000002400183
- .quad 0x0000000002600183
+ i = 0
+ .rept 20
+ .quad i << 21 | 0x183
+ i = i + 1
+ .endr
/* Module mapping starts here */
.fill 492,8,0
-.org 0x6000
-ENTRY(empty_zero_page)
-
-.org 0x7000
-ENTRY(empty_bad_page)
-
-.org 0x8000
-ENTRY(empty_bad_pte_table)
+NEXT_PAGE(level3_physmem_pgt)
+ .quad phys_level2_kernel_pgt | 0x007 /* so that __va works even before pagetable_init */
+ .fill 511,8,0
-.org 0x9000
-ENTRY(empty_bad_pmd_table)
+#undef NEXT_PAGE
-.org 0xa000
-ENTRY(level3_physmem_pgt)
- .quad 0x0000000000105007 /* -> level2_kernel_pgt (so that __va works even before pagetable_init) */
+ .data
- .org 0xb000
#ifdef CONFIG_ACPI_SLEEP
+ .align PAGE_SIZE
ENTRY(wakeup_level4_pgt)
- .quad 0x0000000000102007 /* -> level3_ident_pgt */
+ .quad phys_level3_ident_pgt | 0x007
.fill 255,8,0
- .quad 0x000000000010a007
+ .quad phys_level3_physmem_pgt | 0x007
.fill 254,8,0
/* (2^48-(2*1024*1024*1024))/(2^39) = 511 */
- .quad 0x0000000000103007 /* -> level3_kernel_pgt */
+ .quad phys_level3_kernel_pgt | 0x007
#endif
+#ifndef CONFIG_HOTPLUG_CPU
+ __INITDATA
+#endif
+ /*
+ * This default setting generates an ident mapping at address 0x100000
+ * and a mapping for the kernel that precisely maps virtual address
+ * 0xffffffff80000000 to physical address 0x000000. (always using
+ * 2Mbyte large pages provided by PAE mode)
+ */
+ .align PAGE_SIZE
+ENTRY(boot_level4_pgt)
+ .quad phys_level3_ident_pgt | 0x007
+ .fill 255,8,0
+ .quad phys_level3_physmem_pgt | 0x007
+ .fill 254,8,0
+ /* (2^48-(2*1024*1024*1024))/(2^39) = 511 */
+ .quad phys_level3_kernel_pgt | 0x007
+
.data
.align 16
.globl cpu_gdt_descr
cpu_gdt_descr:
- .word gdt_end-cpu_gdt_table
+ .word gdt_end-cpu_gdt_table-1
gdt:
.quad cpu_gdt_table
#ifdef CONFIG_SMP
* Also sysret mandates a special GDT layout
*/
-.align L1_CACHE_BYTES
+ .section .data.page_aligned, "aw"
+ .align PAGE_SIZE
/* The TLS descriptors are currently at a different place compared to i386.
Hopefully nobody expects them at a fixed place (Wine?) */
ENTRY(cpu_gdt_table)
.quad 0x0000000000000000 /* NULL descriptor */
- .quad 0x008f9a000000ffff /* __KERNEL_COMPAT32_CS */
+ .quad 0x0 /* unused */
.quad 0x00af9a000000ffff /* __KERNEL_CS */
.quad 0x00cf92000000ffff /* __KERNEL_DS */
.quad 0x00cffa000000ffff /* __USER32_CS */
.quad 0,0 /* TSS */
.quad 0,0 /* LDT */
.quad 0,0,0 /* three TLS descriptors */
- .quad 0x00009a000000ffff /* __KERNEL16_CS - 16bit PM for S3 wakeup. */
- /* base must be patched for real base address. */
+ .quad 0 /* unused */
gdt_end:
/* asm/segment.h:GDT_ENTRIES must match this */
/* This should be a multiple of the cache line size */
- /* GDTs of other CPUs: */
- .fill (GDT_SIZE * NR_CPUS) - (gdt_end - cpu_gdt_table)
-
- .align L1_CACHE_BYTES
-ENTRY(idt_table)
- .rept 256
- .quad 0
- .quad 0
- .endr
+ /* GDTs of other CPUs are now dynamically allocated */
+
+ /* zero the remaining page */
+ .fill PAGE_SIZE / 8 - GDT_ENTRIES,8,0
+ .section .bss, "aw", @nobits
+ .align L1_CACHE_BYTES
+ENTRY(idt_table)
+ .skip 256 * 16
+
+ .section .bss.page_aligned, "aw", @nobits
+ .align PAGE_SIZE
+ENTRY(empty_zero_page)
+ .skip PAGE_SIZE