*/
#include <linux/mm.h>
-#include <linux/irq.h>
#include <linux/interrupt.h>
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/mc146818rtc.h>
#include <linux/acpi.h>
#include <linux/sysdev.h>
+#ifdef CONFIG_ACPI
+#include <acpi/acpi_bus.h>
+#endif
#include <asm/io.h>
#include <asm/smp.h>
#include <asm/proto.h>
#include <asm/mach_apic.h>
#include <asm/acpi.h>
+#include <asm/dma.h>
#define __apicdebuginit __init
static int no_timer_check;
+int disable_timer_pin_1 __initdata;
+
+int timer_over_8254 __initdata = 0;
+
+/* Where if anywhere is the i8259 connect in external int mode */
+static struct { int pin, apic; } ioapic_i8259 = { -1, -1 };
+
static DEFINE_SPINLOCK(ioapic_lock);
/*
* Rough estimation of how many shared IRQs there are, can
* be changed anytime.
*/
-#define MAX_PLUS_SHARED_IRQS NR_IRQS
+#define MAX_PLUS_SHARED_IRQS NR_IRQ_VECTORS
#define PIN_MAP_SIZE (MAX_PLUS_SHARED_IRQS + NR_IRQS)
/*
short apic, pin, next;
} irq_2_pin[PIN_MAP_SIZE];
-int vector_irq[NR_VECTORS] = { [0 ... NR_VECTORS - 1] = -1};
+int vector_irq[NR_VECTORS] __read_mostly = { [0 ... NR_VECTORS - 1] = -1};
#ifdef CONFIG_PCI_MSI
#define vector_to_irq(vector) \
(platform_legacy_irq(vector) ? vector : vector_irq[vector])
#define vector_to_irq(vector) (vector)
#endif
+#define __DO_ACTION(R, ACTION, FINAL) \
+ \
+{ \
+ int pin; \
+ struct irq_pin_list *entry = irq_2_pin + irq; \
+ \
+ BUG_ON(irq >= NR_IRQS); \
+ for (;;) { \
+ unsigned int reg; \
+ pin = entry->pin; \
+ if (pin == -1) \
+ break; \
+ reg = io_apic_read(entry->apic, 0x10 + R + pin*2); \
+ reg ACTION; \
+ io_apic_modify(entry->apic, reg); \
+ if (!entry->next) \
+ break; \
+ entry = irq_2_pin + entry->next; \
+ } \
+ FINAL; \
+}
+
+#ifdef CONFIG_SMP
+static void set_ioapic_affinity_irq(unsigned int irq, cpumask_t mask)
+{
+ unsigned long flags;
+ unsigned int dest;
+ cpumask_t tmp;
+
+ cpus_and(tmp, mask, cpu_online_map);
+ if (cpus_empty(tmp))
+ tmp = TARGET_CPUS;
+
+ cpus_and(mask, tmp, CPU_MASK_ALL);
+
+ dest = cpu_mask_to_apicid(mask);
+
+ /*
+ * Only the high 8 bits are valid.
+ */
+ dest = SET_APIC_LOGICAL_ID(dest);
+
+ spin_lock_irqsave(&ioapic_lock, flags);
+ __DO_ACTION(1, = dest, )
+ set_irq_info(irq, mask);
+ spin_unlock_irqrestore(&ioapic_lock, flags);
+}
+#endif
+
+static u8 gsi_2_irq[NR_IRQ_VECTORS] = { [0 ... NR_IRQ_VECTORS-1] = 0xFF };
+
/*
* The common case is 1:1 IRQ<->pin mappings. Sometimes there are
* shared ISA-space IRQs, so we have to support them. We are super
static int first_free_entry = NR_IRQS;
struct irq_pin_list *entry = irq_2_pin + irq;
+ BUG_ON(irq >= NR_IRQS);
while (entry->next)
entry = irq_2_pin + entry->next;
entry->next = first_free_entry;
entry = irq_2_pin + entry->next;
if (++first_free_entry >= PIN_MAP_SIZE)
- panic("io_apic.c: whoops");
+ panic("io_apic.c: ran out of irq_2_pin entries!");
}
entry->apic = apic;
entry->pin = pin;
}
-#define __DO_ACTION(R, ACTION, FINAL) \
- \
-{ \
- int pin; \
- struct irq_pin_list *entry = irq_2_pin + irq; \
- \
- for (;;) { \
- unsigned int reg; \
- pin = entry->pin; \
- if (pin == -1) \
- break; \
- reg = io_apic_read(entry->apic, 0x10 + R + pin*2); \
- reg ACTION; \
- io_apic_modify(entry->apic, reg); \
- if (!entry->next) \
- break; \
- entry = irq_2_pin + entry->next; \
- } \
- FINAL; \
-}
#define DO_ACTION(name,R,ACTION, FINAL) \
\
__setup("noapic", disable_ioapic_setup);
__setup("apic", enable_ioapic_setup);
+static int __init setup_disable_8254_timer(char *s)
+{
+ timer_over_8254 = -1;
+ return 1;
+}
+static int __init setup_enable_8254_timer(char *s)
+{
+ timer_over_8254 = 2;
+ return 1;
+}
+
+__setup("disable_8254_timer", setup_disable_8254_timer);
+__setup("enable_8254_timer", setup_enable_8254_timer);
+
#include <asm/pci-direct.h>
#include <linux/pci_ids.h>
#include <linux/pci.h>
+
+#ifdef CONFIG_ACPI
+
+static int nvidia_hpet_detected __initdata;
+
+static int __init nvidia_hpet_check(unsigned long phys, unsigned long size)
+{
+ nvidia_hpet_detected = 1;
+ return 0;
+}
+#endif
+
/* Temporary Hack. Nvidia and VIA boards currently only work with IO-APIC
off. Check for an Nvidia or VIA PCI bridge and turn it off.
Use pci direct infrastructure because this runs before the PCI subsystem.
And another hack to disable the IOMMU on VIA chipsets.
+ ... and others. Really should move this somewhere else.
+
Kludge-O-Rama. */
void __init check_ioapic(void)
{
int num,slot,func;
- if (ioapic_force)
- return;
-
/* Poor man's PCI discovery */
for (num = 0; num < 32; num++) {
for (slot = 0; slot < 32; slot++) {
switch (vendor) {
case PCI_VENDOR_ID_VIA:
#ifdef CONFIG_GART_IOMMU
- if ((end_pfn >= (0xffffffff>>PAGE_SHIFT) ||
+ if ((end_pfn > MAX_DMA32_PFN ||
force_iommu) &&
!iommu_aperture_allowed) {
printk(KERN_INFO
- "Looks like a VIA chipset. Disabling IOMMU. Overwrite with \"iommu=allowed\"\n");
+ "Looks like a VIA chipset. Disabling IOMMU. Override with \"iommu=allowed\"\n");
iommu_aperture_disabled = 1;
}
#endif
return;
case PCI_VENDOR_ID_NVIDIA:
#ifdef CONFIG_ACPI
- /* All timer overrides on Nvidia
- seem to be wrong. Skip them. */
- acpi_skip_timer_override = 1;
- printk(KERN_INFO
- "Nvidia board detected. Ignoring ACPI timer override.\n");
+ /*
+ * All timer overrides on Nvidia are
+ * wrong unless HPET is enabled.
+ */
+ nvidia_hpet_detected = 0;
+ acpi_table_parse(ACPI_HPET,
+ nvidia_hpet_check);
+ if (nvidia_hpet_detected == 0) {
+ acpi_skip_timer_override = 1;
+ printk(KERN_INFO "Nvidia board "
+ "detected. Ignoring ACPI "
+ "timer override.\n");
+ }
#endif
/* RED-PEN skip them on mptables too? */
return;
+
+ /* This should be actually default, but
+ for 2.6.16 let's do it for ATI only where
+ it's really needed. */
+ case PCI_VENDOR_ID_ATI:
+ if (timer_over_8254 == 1) {
+ timer_over_8254 = 0;
+ printk(KERN_INFO
+ "ATI board detected. Disabling timer routing over 8254.\n");
+ }
+ return;
}
+
/* No multi-function device? */
type = read_pci_config_byte(num,slot,func,
PCI_HEADER_TYPE);
return -1;
}
+static int __init find_isa_irq_apic(int irq, int type)
+{
+ int i;
+
+ for (i = 0; i < mp_irq_entries; i++) {
+ int lbus = mp_irqs[i].mpc_srcbus;
+
+ if ((mp_bus_id_to_type[lbus] == MP_BUS_ISA ||
+ mp_bus_id_to_type[lbus] == MP_BUS_EISA ||
+ mp_bus_id_to_type[lbus] == MP_BUS_MCA) &&
+ (mp_irqs[i].mpc_irqtype == type) &&
+ (mp_irqs[i].mpc_srcbusirq == irq))
+ break;
+ }
+ if (i < mp_irq_entries) {
+ int apic;
+ for(apic = 0; apic < nr_ioapics; apic++) {
+ if (mp_ioapics[apic].mpc_apicid == mp_irqs[i].mpc_dstapic)
+ return apic;
+ }
+ }
+
+ return -1;
+}
+
/*
* Find a specific PCI IRQ entry.
* Not an __init, possibly needed by modules
best_guess = irq;
}
}
+ BUG_ON(best_guess >= NR_IRQS);
return best_guess;
}
return MPBIOS_trigger(idx);
}
+static int next_irq = 16;
+
+/*
+ * gsi_irq_sharing -- Name overload! "irq" can be either a legacy IRQ
+ * in the range 0-15, a linux IRQ in the range 0-223, or a GSI number
+ * from ACPI, which can reach 800 in large boxen.
+ *
+ * Compact the sparse GSI space into a sequential IRQ series and reuse
+ * vectors if possible.
+ */
+int gsi_irq_sharing(int gsi)
+{
+ int i, tries, vector;
+
+ BUG_ON(gsi >= NR_IRQ_VECTORS);
+
+ if (platform_legacy_irq(gsi))
+ return gsi;
+
+ if (gsi_2_irq[gsi] != 0xFF)
+ return (int)gsi_2_irq[gsi];
+
+ tries = NR_IRQS;
+ try_again:
+ vector = assign_irq_vector(gsi);
+
+ /*
+ * Sharing vectors means sharing IRQs, so scan irq_vectors for previous
+ * use of vector and if found, return that IRQ. However, we never want
+ * to share legacy IRQs, which usually have a different trigger mode
+ * than PCI.
+ */
+ for (i = 0; i < NR_IRQS; i++)
+ if (IO_APIC_VECTOR(i) == vector)
+ break;
+ if (platform_legacy_irq(i)) {
+ if (--tries >= 0) {
+ IO_APIC_VECTOR(i) = 0;
+ goto try_again;
+ }
+ panic("gsi_irq_sharing: didn't find an IRQ using vector 0x%02X for GSI %d", vector, gsi);
+ }
+ if (i < NR_IRQS) {
+ gsi_2_irq[gsi] = i;
+ printk(KERN_INFO "GSI %d sharing vector 0x%02X and IRQ %d\n",
+ gsi, vector, i);
+ return i;
+ }
+
+ i = next_irq++;
+ BUG_ON(i >= NR_IRQS);
+ gsi_2_irq[gsi] = i;
+ IO_APIC_VECTOR(i) = vector;
+ printk(KERN_INFO "GSI %d assigned vector 0x%02X and IRQ %d\n",
+ gsi, vector, i);
+ return i;
+}
+
static int pin_2_irq(int idx, int apic, int pin)
{
int irq, i;
while (i < apic)
irq += nr_ioapic_registers[i++];
irq += pin;
+ irq = gsi_irq_sharing(irq);
break;
}
default:
break;
}
}
+ BUG_ON(irq >= NR_IRQS);
/*
* PCI IRQ command line redirection. Yes, limits are hardcoded.
}
}
}
+ BUG_ON(irq >= NR_IRQS);
return irq;
}
}
/* irq_vectors is indexed by the sum of all RTEs in all I/O APICs. */
-u8 irq_vector[NR_IRQ_VECTORS] = { FIRST_DEVICE_VECTOR , 0 };
+u8 irq_vector[NR_IRQ_VECTORS] __read_mostly = { FIRST_DEVICE_VECTOR , 0 };
int assign_irq_vector(int irq)
{
static int current_vector = FIRST_DEVICE_VECTOR, offset = 0;
- BUG_ON(irq >= NR_IRQ_VECTORS);
- if (IO_APIC_VECTOR(irq) > 0)
+ BUG_ON(irq != AUTO_ASSIGN && (unsigned)irq >= NR_IRQ_VECTORS);
+ if (irq != AUTO_ASSIGN && IO_APIC_VECTOR(irq) > 0)
return IO_APIC_VECTOR(irq);
next:
current_vector += 8;
goto next;
if (current_vector >= FIRST_SYSTEM_VECTOR) {
- offset++;
- if (!(offset%8))
- return -ENOSPC;
+ /* If we run out of vectors on large boxen, must share them. */
+ offset = (offset + 1) % 8;
current_vector = FIRST_DEVICE_VECTOR + offset;
}
spin_lock_irqsave(&ioapic_lock, flags);
io_apic_write(apic, 0x11+2*pin, *(((int *)&entry)+1));
io_apic_write(apic, 0x10+2*pin, *(((int *)&entry)+0));
+ set_native_irq_info(irq, TARGET_CPUS);
spin_unlock_irqrestore(&ioapic_lock, flags);
}
}
* Set up the 8259A-master output pin as broadcast to all
* CPUs.
*/
-static void __init setup_ExtINT_IRQ0_pin(unsigned int pin, int vector)
+static void __init setup_ExtINT_IRQ0_pin(unsigned int apic, unsigned int pin, int vector)
{
struct IO_APIC_route_entry entry;
unsigned long flags;
disable_8259A_irq(0);
/* mask LVT0 */
- apic_write_around(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_EXTINT);
+ apic_write(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_EXTINT);
/*
* We use logical delivery to get the timer IRQ
* Add it to the IO-APIC irq-routing table:
*/
spin_lock_irqsave(&ioapic_lock, flags);
- io_apic_write(0, 0x11+2*pin, *(((int *)&entry)+1));
- io_apic_write(0, 0x10+2*pin, *(((int *)&entry)+0));
+ io_apic_write(apic, 0x11+2*pin, *(((int *)&entry)+1));
+ io_apic_write(apic, 0x10+2*pin, *(((int *)&entry)+0));
spin_unlock_irqrestore(&ioapic_lock, flags);
enable_8259A_irq(0);
v = apic_read(APIC_TASKPRI);
printk(KERN_DEBUG "... APIC TASKPRI: %08x (%02x)\n", v, v & APIC_TPRI_MASK);
- if (APIC_INTEGRATED(ver)) { /* !82489DX */
- v = apic_read(APIC_ARBPRI);
- printk(KERN_DEBUG "... APIC ARBPRI: %08x (%02x)\n", v,
- v & APIC_ARBPRI_MASK);
- v = apic_read(APIC_PROCPRI);
- printk(KERN_DEBUG "... APIC PROCPRI: %08x\n", v);
- }
+ v = apic_read(APIC_ARBPRI);
+ printk(KERN_DEBUG "... APIC ARBPRI: %08x (%02x)\n", v,
+ v & APIC_ARBPRI_MASK);
+ v = apic_read(APIC_PROCPRI);
+ printk(KERN_DEBUG "... APIC PROCPRI: %08x\n", v);
v = apic_read(APIC_EOI);
printk(KERN_DEBUG "... APIC EOI: %08x\n", v);
printk(KERN_DEBUG "... APIC IRR field:\n");
print_APIC_bitfield(APIC_IRR);
- if (APIC_INTEGRATED(ver)) { /* !82489DX */
- if (maxlvt > 3) /* Due to the Pentium erratum 3AP. */
- apic_write(APIC_ESR, 0);
- v = apic_read(APIC_ESR);
- printk(KERN_DEBUG "... APIC ESR: %08x\n", v);
- }
+ v = apic_read(APIC_ESR);
+ printk(KERN_DEBUG "... APIC ESR: %08x\n", v);
v = apic_read(APIC_ICR);
printk(KERN_DEBUG "... APIC ICR: %08x\n", v);
void __apicdebuginit print_PIC(void)
{
- extern spinlock_t i8259A_lock;
unsigned int v;
unsigned long flags;
static void __init enable_IO_APIC(void)
{
union IO_APIC_reg_01 reg_01;
- int i;
+ int i8259_apic, i8259_pin;
+ int i, apic;
unsigned long flags;
for (i = 0; i < PIN_MAP_SIZE; i++) {
/*
* The number of IO-APIC IRQ registers (== #pins):
*/
- for (i = 0; i < nr_ioapics; i++) {
+ for (apic = 0; apic < nr_ioapics; apic++) {
spin_lock_irqsave(&ioapic_lock, flags);
- reg_01.raw = io_apic_read(i, 1);
+ reg_01.raw = io_apic_read(apic, 1);
spin_unlock_irqrestore(&ioapic_lock, flags);
- nr_ioapic_registers[i] = reg_01.bits.entries+1;
+ nr_ioapic_registers[apic] = reg_01.bits.entries+1;
+ }
+ for(apic = 0; apic < nr_ioapics; apic++) {
+ int pin;
+ /* See if any of the pins is in ExtINT mode */
+ for (pin = 0; pin < nr_ioapic_registers[apic]; pin++) {
+ struct IO_APIC_route_entry entry;
+ spin_lock_irqsave(&ioapic_lock, flags);
+ *(((int *)&entry) + 0) = io_apic_read(apic, 0x10 + 2 * pin);
+ *(((int *)&entry) + 1) = io_apic_read(apic, 0x11 + 2 * pin);
+ spin_unlock_irqrestore(&ioapic_lock, flags);
+
+
+ /* If the interrupt line is enabled and in ExtInt mode
+ * I have found the pin where the i8259 is connected.
+ */
+ if ((entry.mask == 0) && (entry.delivery_mode == dest_ExtINT)) {
+ ioapic_i8259.apic = apic;
+ ioapic_i8259.pin = pin;
+ goto found_i8259;
+ }
+ }
+ }
+ found_i8259:
+ /* Look to see what if the MP table has reported the ExtINT */
+ i8259_pin = find_isa_irq_pin(0, mp_ExtINT);
+ i8259_apic = find_isa_irq_apic(0, mp_ExtINT);
+ /* Trust the MP table if nothing is setup in the hardware */
+ if ((ioapic_i8259.pin == -1) && (i8259_pin >= 0)) {
+ printk(KERN_WARNING "ExtINT not setup in hardware but reported by MP table\n");
+ ioapic_i8259.pin = i8259_pin;
+ ioapic_i8259.apic = i8259_apic;
+ }
+ /* Complain if the MP table and the hardware disagree */
+ if (((ioapic_i8259.apic != i8259_apic) || (ioapic_i8259.pin != i8259_pin)) &&
+ (i8259_pin >= 0) && (ioapic_i8259.pin >= 0))
+ {
+ printk(KERN_WARNING "ExtINT in hardware and MP table differ\n");
}
/*
*/
clear_IO_APIC();
- disconnect_bsp_APIC();
+ /*
+ * If the i8259 is routed through an IOAPIC
+ * Put that IOAPIC in virtual wire mode
+ * so legacy interrupts can be delivered.
+ */
+ if (ioapic_i8259.pin != -1) {
+ struct IO_APIC_route_entry entry;
+ unsigned long flags;
+
+ memset(&entry, 0, sizeof(entry));
+ entry.mask = 0; /* Enabled */
+ entry.trigger = 0; /* Edge */
+ entry.irr = 0;
+ entry.polarity = 0; /* High */
+ entry.delivery_status = 0;
+ entry.dest_mode = 0; /* Physical */
+ entry.delivery_mode = dest_ExtINT; /* ExtInt */
+ entry.vector = 0;
+ entry.dest.physical.physical_dest =
+ GET_APIC_ID(apic_read(APIC_ID));
+
+ /*
+ * Add it to the IO-APIC irq-routing table:
+ */
+ spin_lock_irqsave(&ioapic_lock, flags);
+ io_apic_write(ioapic_i8259.apic, 0x11+2*ioapic_i8259.pin,
+ *(((int *)&entry)+1));
+ io_apic_write(ioapic_i8259.apic, 0x10+2*ioapic_i8259.pin,
+ *(((int *)&entry)+0));
+ spin_unlock_irqrestore(&ioapic_lock, flags);
+ }
+
+ disconnect_bsp_APIC(ioapic_i8259.pin != -1);
}
/*
*/
static void ack_edge_ioapic_irq(unsigned int irq)
{
+ move_irq(irq);
if ((irq_desc[irq].status & (IRQ_PENDING | IRQ_DISABLED))
== (IRQ_PENDING | IRQ_DISABLED))
mask_IO_APIC_irq(irq);
static void end_level_ioapic_irq (unsigned int irq)
{
+ move_irq(irq);
ack_APIC_irq();
}
-static void set_ioapic_affinity_irq(unsigned int irq, cpumask_t mask)
-{
- unsigned long flags;
- unsigned int dest;
-
- dest = cpu_mask_to_apicid(mask);
-
- /*
- * Only the high 8 bits are valid.
- */
- dest = SET_APIC_LOGICAL_ID(dest);
-
- spin_lock_irqsave(&ioapic_lock, flags);
- __DO_ACTION(1, = dest, )
- spin_unlock_irqrestore(&ioapic_lock, flags);
-}
-
#ifdef CONFIG_PCI_MSI
static unsigned int startup_edge_ioapic_vector(unsigned int vector)
{
{
int irq = vector_to_irq(vector);
+ move_native_irq(vector);
ack_edge_ioapic_irq(irq);
}
{
int irq = vector_to_irq(vector);
+ move_native_irq(vector);
end_level_ioapic_irq(irq);
}
unmask_IO_APIC_irq(irq);
}
+#ifdef CONFIG_SMP
static void set_ioapic_affinity_vector (unsigned int vector,
cpumask_t cpu_mask)
{
int irq = vector_to_irq(vector);
+ set_native_irq_info(vector, cpu_mask);
set_ioapic_affinity_irq(irq, cpu_mask);
}
-#endif
+#endif // CONFIG_SMP
+#endif // CONFIG_PCI_MSI
/*
* Level and edge triggered IO-APIC interrupts need different handling,
* races.
*/
-static struct hw_interrupt_type ioapic_edge_type = {
+static struct hw_interrupt_type ioapic_edge_type __read_mostly = {
.typename = "IO-APIC-edge",
.startup = startup_edge_ioapic,
.shutdown = shutdown_edge_ioapic,
.disable = disable_edge_ioapic,
.ack = ack_edge_ioapic,
.end = end_edge_ioapic,
+#ifdef CONFIG_SMP
.set_affinity = set_ioapic_affinity,
+#endif
};
-static struct hw_interrupt_type ioapic_level_type = {
+static struct hw_interrupt_type ioapic_level_type __read_mostly = {
.typename = "IO-APIC-level",
.startup = startup_level_ioapic,
.shutdown = shutdown_level_ioapic,
.disable = disable_level_ioapic,
.ack = mask_and_ack_level_ioapic,
.end = end_level_ioapic,
+#ifdef CONFIG_SMP
.set_affinity = set_ioapic_affinity,
+#endif
};
static inline void init_IO_APIC_traps(void)
unsigned long v;
v = apic_read(APIC_LVT0);
- apic_write_around(APIC_LVT0, v & ~APIC_LVT_MASKED);
+ apic_write(APIC_LVT0, v & ~APIC_LVT_MASKED);
}
static void disable_lapic_irq (unsigned int irq)
unsigned long v;
v = apic_read(APIC_LVT0);
- apic_write_around(APIC_LVT0, v | APIC_LVT_MASKED);
+ apic_write(APIC_LVT0, v | APIC_LVT_MASKED);
}
static void ack_lapic_irq (unsigned int irq)
static void end_lapic_irq (unsigned int i) { /* nothing */ }
-static struct hw_interrupt_type lapic_irq_type = {
+static struct hw_interrupt_type lapic_irq_type __read_mostly = {
.typename = "local-APIC-edge",
.startup = NULL, /* startup_irq() not used for IRQ0 */
.shutdown = NULL, /* shutdown_irq() not used for IRQ0 */
*/
static inline void unlock_ExtINT_logic(void)
{
- int pin, i;
+ int apic, pin, i;
struct IO_APIC_route_entry entry0, entry1;
unsigned char save_control, save_freq_select;
unsigned long flags;
- pin = find_isa_irq_pin(8, mp_INT);
+ pin = find_isa_irq_pin(8, mp_INT);
+ apic = find_isa_irq_apic(8, mp_INT);
if (pin == -1)
return;
spin_lock_irqsave(&ioapic_lock, flags);
- *(((int *)&entry0) + 1) = io_apic_read(0, 0x11 + 2 * pin);
- *(((int *)&entry0) + 0) = io_apic_read(0, 0x10 + 2 * pin);
+ *(((int *)&entry0) + 1) = io_apic_read(apic, 0x11 + 2 * pin);
+ *(((int *)&entry0) + 0) = io_apic_read(apic, 0x10 + 2 * pin);
spin_unlock_irqrestore(&ioapic_lock, flags);
- clear_IO_APIC_pin(0, pin);
+ clear_IO_APIC_pin(apic, pin);
memset(&entry1, 0, sizeof(entry1));
entry1.vector = 0;
spin_lock_irqsave(&ioapic_lock, flags);
- io_apic_write(0, 0x11 + 2 * pin, *(((int *)&entry1) + 1));
- io_apic_write(0, 0x10 + 2 * pin, *(((int *)&entry1) + 0));
+ io_apic_write(apic, 0x11 + 2 * pin, *(((int *)&entry1) + 1));
+ io_apic_write(apic, 0x10 + 2 * pin, *(((int *)&entry1) + 0));
spin_unlock_irqrestore(&ioapic_lock, flags);
save_control = CMOS_READ(RTC_CONTROL);
CMOS_WRITE(save_control, RTC_CONTROL);
CMOS_WRITE(save_freq_select, RTC_FREQ_SELECT);
- clear_IO_APIC_pin(0, pin);
+ clear_IO_APIC_pin(apic, pin);
spin_lock_irqsave(&ioapic_lock, flags);
- io_apic_write(0, 0x11 + 2 * pin, *(((int *)&entry0) + 1));
- io_apic_write(0, 0x10 + 2 * pin, *(((int *)&entry0) + 0));
+ io_apic_write(apic, 0x11 + 2 * pin, *(((int *)&entry0) + 1));
+ io_apic_write(apic, 0x10 + 2 * pin, *(((int *)&entry0) + 0));
spin_unlock_irqrestore(&ioapic_lock, flags);
}
+int timer_uses_ioapic_pin_0;
+
/*
* This code may look a bit paranoid, but it's supposed to cooperate with
* a wide range of boards and BIOS bugs. Fortunately only the timer IRQ
* is so screwy. Thanks to Brian Perkins for testing/hacking this beast
* fanatically on his truly buggy board.
+ *
+ * FIXME: really need to revamp this for modern platforms only.
*/
static inline void check_timer(void)
{
- int pin1, pin2;
+ int apic1, pin1, apic2, pin2;
int vector;
/*
* the 8259A which implies the virtual wire has to be
* disabled in the local APIC.
*/
- apic_write_around(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_EXTINT);
+ apic_write(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_EXTINT);
init_8259A(1);
- enable_8259A_irq(0);
+ if (timer_over_8254 > 0)
+ enable_8259A_irq(0);
- pin1 = find_isa_irq_pin(0, mp_INT);
- pin2 = find_isa_irq_pin(0, mp_ExtINT);
+ pin1 = find_isa_irq_pin(0, mp_INT);
+ apic1 = find_isa_irq_apic(0, mp_INT);
+ pin2 = ioapic_i8259.pin;
+ apic2 = ioapic_i8259.apic;
- apic_printk(APIC_VERBOSE,KERN_INFO "..TIMER: vector=0x%02X pin1=%d pin2=%d\n", vector, pin1, pin2);
+ if (pin1 == 0)
+ timer_uses_ioapic_pin_0 = 1;
+
+ apic_printk(APIC_VERBOSE,KERN_INFO "..TIMER: vector=0x%02X apic1=%d pin1=%d apic2=%d pin2=%d\n",
+ vector, apic1, pin1, apic2, pin2);
if (pin1 != -1) {
/*
setup_nmi();
enable_8259A_irq(0);
}
+ if (disable_timer_pin_1 > 0)
+ clear_IO_APIC_pin(0, pin1);
return;
}
- clear_IO_APIC_pin(0, pin1);
- apic_printk(APIC_QUIET,KERN_ERR "..MP-BIOS bug: 8254 timer not connected to IO-APIC\n");
+ clear_IO_APIC_pin(apic1, pin1);
+ apic_printk(APIC_QUIET,KERN_ERR "..MP-BIOS bug: 8254 timer not "
+ "connected to IO-APIC\n");
}
- apic_printk(APIC_VERBOSE,KERN_INFO "...trying to set up timer (IRQ0) through the 8259A ... ");
+ apic_printk(APIC_VERBOSE,KERN_INFO "...trying to set up timer (IRQ0) "
+ "through the 8259A ... ");
if (pin2 != -1) {
- apic_printk(APIC_VERBOSE,"\n..... (found pin %d) ...", pin2);
+ apic_printk(APIC_VERBOSE,"\n..... (found apic %d pin %d) ...",
+ apic2, pin2);
/*
* legacy devices should be connected to IO APIC #0
*/
- setup_ExtINT_IRQ0_pin(pin2, vector);
+ setup_ExtINT_IRQ0_pin(apic2, pin2, vector);
if (timer_irq_works()) {
- printk("works.\n");
+ apic_printk(APIC_VERBOSE," works.\n");
nmi_watchdog_default();
if (nmi_watchdog == NMI_IO_APIC) {
setup_nmi();
/*
* Cleanup, just in case ...
*/
- clear_IO_APIC_pin(0, pin2);
+ clear_IO_APIC_pin(apic2, pin2);
}
- printk(" failed.\n");
+ apic_printk(APIC_VERBOSE," failed.\n");
- if (nmi_watchdog) {
+ if (nmi_watchdog == NMI_IO_APIC) {
printk(KERN_WARNING "timer doesn't work through the IO-APIC - disabling NMI Watchdog!\n");
nmi_watchdog = 0;
}
disable_8259A_irq(0);
irq_desc[0].handler = &lapic_irq_type;
- apic_write_around(APIC_LVT0, APIC_DM_FIXED | vector); /* Fixed mode */
+ apic_write(APIC_LVT0, APIC_DM_FIXED | vector); /* Fixed mode */
enable_8259A_irq(0);
if (timer_irq_works()) {
- apic_printk(APIC_QUIET, " works.\n");
+ apic_printk(APIC_VERBOSE," works.\n");
return;
}
- apic_write_around(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_FIXED | vector);
+ apic_write(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_FIXED | vector);
apic_printk(APIC_VERBOSE," failed.\n");
apic_printk(APIC_VERBOSE, KERN_INFO "...trying to set up timer as ExtINT IRQ...");
init_8259A(0);
make_8259A_irq(0);
- apic_write_around(APIC_LVT0, APIC_DM_EXTINT);
+ apic_write(APIC_LVT0, APIC_DM_EXTINT);
unlock_ExtINT_logic();
ACPI-based IOAPIC Configuration
-------------------------------------------------------------------------- */
-#ifdef CONFIG_ACPI_BOOT
+#ifdef CONFIG_ACPI
#define IO_APIC_MAX_ID 0xFE
}
-int io_apic_set_pci_routing (int ioapic, int pin, int irq, int edge_level, int active_high_low)
+int io_apic_set_pci_routing (int ioapic, int pin, int irq, int triggering, int polarity)
{
struct IO_APIC_route_entry entry;
unsigned long flags;
entry.delivery_mode = INT_DELIVERY_MODE;
entry.dest_mode = INT_DEST_MODE;
entry.dest.logical.logical_dest = cpu_mask_to_apicid(TARGET_CPUS);
- entry.trigger = edge_level;
- entry.polarity = active_high_low;
+ entry.trigger = triggering;
+ entry.polarity = polarity;
entry.mask = 1; /* Disabled (masked) */
+ irq = gsi_irq_sharing(irq);
/*
* IRQs < 16 are already in the irq_2_pin[] map
*/
apic_printk(APIC_VERBOSE,KERN_DEBUG "IOAPIC[%d]: Set PCI routing entry (%d-%d -> 0x%x -> "
"IRQ %d Mode:%i Active:%i)\n", ioapic,
mp_ioapics[ioapic].mpc_apicid, pin, entry.vector, irq,
- edge_level, active_high_low);
+ triggering, polarity);
- ioapic_register_intr(irq, entry.vector, edge_level);
+ ioapic_register_intr(irq, entry.vector, triggering);
if (!ioapic && (irq < 16))
disable_8259A_irq(irq);
spin_lock_irqsave(&ioapic_lock, flags);
io_apic_write(ioapic, 0x11+2*pin, *(((int *)&entry)+1));
io_apic_write(ioapic, 0x10+2*pin, *(((int *)&entry)+0));
+ set_native_irq_info(use_pci_vector() ? entry.vector : irq, TARGET_CPUS);
spin_unlock_irqrestore(&ioapic_lock, flags);
return 0;
}
-#endif /*CONFIG_ACPI_BOOT*/
+#endif /* CONFIG_ACPI */
/*
* we need to reprogram the ioredtbls to cater for the cpus which have come online
* so mask in all cases should simply be TARGET_CPUS
*/
+#ifdef CONFIG_SMP
void __init setup_ioapic_dest(void)
{
int pin, ioapic, irq, irq_entry;
}
}
+#endif
git://git.onelab.eu / linux-2.6.git / blobdiff