#include <linux/interrupt.h>
#include <linux/init.h>
#include <linux/mc146818rtc.h>
-#include <linux/irq.h>
#include <linux/time.h>
#include <linux/ioport.h>
#include <linux/module.h>
#include <asm/apic.h>
#endif
-u64 jiffies_64 = INITIAL_JIFFIES;
-
-EXPORT_SYMBOL(jiffies_64);
-
#ifdef CONFIG_CPU_FREQ
static void cpufreq_delayed_get(void);
#endif
extern void i8254_timer_resume(void);
extern int using_apic_timer;
+static char *time_init_gtod(void);
+
DEFINE_SPINLOCK(rtc_lock);
DEFINE_SPINLOCK(i8253_lock);
-static int nohpet __initdata = 0;
+int nohpet __initdata = 0;
static int notsc __initdata = 0;
#undef HPET_HACK_ENABLE_DANGEROUS
unsigned int cpu_khz; /* TSC clocks / usec, not used here */
static unsigned long hpet_period; /* fsecs / HPET clock */
unsigned long hpet_tick; /* HPET clocks / interrupt */
+int hpet_use_timer; /* Use counter of hpet for time keeping, otherwise PIT */
unsigned long vxtime_hz = PIT_TICK_RATE;
int report_lost_ticks; /* command line option */
unsigned long long monotonic_base;
struct timespec __xtime __section_xtime;
struct timezone __sys_tz __section_sys_tz;
-static inline void rdtscll_sync(unsigned long *tsc)
-{
-#ifdef CONFIG_SMP
- sync_core();
-#endif
- rdtscll(*tsc);
-}
-
/*
* do_gettimeoffset() returns microseconds since last timer interrupt was
* triggered by hardware. A memory read of HPET is slower than a register read
{
unsigned long t;
unsigned long x;
- rdtscll_sync(&t);
- if (t < vxtime.last_tsc) t = vxtime.last_tsc; /* hack */
+ t = get_cycles_sync();
+ if (t < vxtime.last_tsc)
+ t = vxtime.last_tsc; /* hack */
x = ((t - vxtime.last_tsc) * vxtime.tsc_quot) >> 32;
return x;
}
static inline unsigned int do_gettimeoffset_hpet(void)
{
- return ((hpet_readl(HPET_COUNTER) - vxtime.last) * vxtime.quot) >> 32;
+ /* cap counter read to one tick to avoid inconsistencies */
+ unsigned long counter = hpet_readl(HPET_COUNTER) - vxtime.last;
+ return (min(counter,hpet_tick) * vxtime.quot) >> 32;
}
unsigned int (*do_gettimeoffset)(void) = do_gettimeoffset_tsc;
set_normalized_timespec(&xtime, sec, nsec);
set_normalized_timespec(&wall_to_monotonic, wtm_sec, wtm_nsec);
- time_adjust = 0; /* stop active adjtime() */
- time_status |= STA_UNSYNC;
- time_maxerror = NTP_PHASE_LIMIT;
- time_esterror = NTP_PHASE_LIMIT;
+ ntp_clear();
write_sequnlock_irq(&xtime_lock);
clock_was_set();
{
unsigned long pc = instruction_pointer(regs);
- /* Assume the lock function has either no stack frame or only a single word.
- This checks if the address on the stack looks like a kernel text address.
+ /* Assume the lock function has either no stack frame or only a single
+ word. This checks if the address on the stack looks like a kernel
+ text address.
There is a small window for false hits, but in that case the tick
is just accounted to the spinlock function.
Better would be to write these functions in assembler again
real_minutes += 30; /* correct for half hour time zone */
real_minutes %= 60;
-#if 0
- /* AMD 8111 is a really bad time keeper and hits this regularly.
- It probably was an attempt to avoid screwing up DST, but ignore
- that for now. */
if (abs(real_minutes - cmos_minutes) >= 30) {
printk(KERN_WARNING "time.c: can't update CMOS clock "
"from %d to %d\n", cmos_minutes, real_minutes);
- } else
-#endif
-
- {
- BIN_TO_BCD(real_seconds);
- BIN_TO_BCD(real_minutes);
+ } else {
+ BIN_TO_BCD(real_seconds);
+ BIN_TO_BCD(real_minutes);
CMOS_WRITE(real_seconds, RTC_SECONDS);
CMOS_WRITE(real_minutes, RTC_MINUTES);
}
last_offset = vxtime.last;
base = monotonic_base;
- this_offset = hpet_readl(HPET_T0_CMP) - hpet_tick;
-
+ this_offset = hpet_readl(HPET_COUNTER);
} while (read_seqretry(&xtime_lock, seq));
offset = (this_offset - last_offset);
- offset *=(NSEC_PER_SEC/HZ)/hpet_tick;
- return base + offset;
- }else{
+ offset *= (NSEC_PER_SEC/HZ) / hpet_tick;
+ } else {
do {
seq = read_seqbegin(&xtime_lock);
last_offset = vxtime.last_tsc;
base = monotonic_base;
} while (read_seqretry(&xtime_lock, seq));
- sync_core();
- rdtscll(this_offset);
- offset = (this_offset - last_offset)*1000/cpu_khz;
- return base + offset;
+ this_offset = get_cycles_sync();
+ offset = (this_offset - last_offset)*1000 / cpu_khz;
}
-
-
+ return base + offset;
}
EXPORT_SYMBOL(monotonic_clock);
static noinline void handle_lost_ticks(int lost, struct pt_regs *regs)
{
- static long lost_count;
- static int warned;
-
- if (report_lost_ticks) {
- printk(KERN_WARNING "time.c: Lost %d timer "
- "tick(s)! ", lost);
- print_symbol("rip %s)\n", regs->rip);
- }
-
- if (lost_count == 1000 && !warned) {
- printk(KERN_WARNING
- "warning: many lost ticks.\n"
- KERN_WARNING "Your time source seems to be instable or "
+ static long lost_count;
+ static int warned;
+ if (report_lost_ticks) {
+ printk(KERN_WARNING "time.c: Lost %d timer tick(s)! ", lost);
+ print_symbol("rip %s)\n", regs->rip);
+ }
+
+ if (lost_count == 1000 && !warned) {
+ printk(KERN_WARNING "warning: many lost ticks.\n"
+ KERN_WARNING "Your time source seems to be instable or "
"some driver is hogging interupts\n");
- print_symbol("rip %s\n", regs->rip);
- if (vxtime.mode == VXTIME_TSC && vxtime.hpet_address) {
- printk(KERN_WARNING "Falling back to HPET\n");
- vxtime.last = hpet_readl(HPET_T0_CMP) - hpet_tick;
- vxtime.mode = VXTIME_HPET;
- do_gettimeoffset = do_gettimeoffset_hpet;
- }
- /* else should fall back to PIT, but code missing. */
- warned = 1;
- } else
- lost_count++;
+ print_symbol("rip %s\n", regs->rip);
+ if (vxtime.mode == VXTIME_TSC && vxtime.hpet_address) {
+ printk(KERN_WARNING "Falling back to HPET\n");
+ if (hpet_use_timer)
+ vxtime.last = hpet_readl(HPET_T0_CMP) -
+ hpet_tick;
+ else
+ vxtime.last = hpet_readl(HPET_COUNTER);
+ vxtime.mode = VXTIME_HPET;
+ do_gettimeoffset = do_gettimeoffset_hpet;
+ }
+ /* else should fall back to PIT, but code missing. */
+ warned = 1;
+ } else
+ lost_count++;
#ifdef CONFIG_CPU_FREQ
- /* In some cases the CPU can change frequency without us noticing
- (like going into thermal throttle)
- Give cpufreq a change to catch up. */
- if ((lost_count+1) % 25 == 0) {
- cpufreq_delayed_get();
- }
+ /* In some cases the CPU can change frequency without us noticing
+ Give cpufreq a change to catch up. */
+ if ((lost_count+1) % 25 == 0)
+ cpufreq_delayed_get();
#endif
}
-static irqreturn_t timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+void main_timer_handler(struct pt_regs *regs)
{
static unsigned long rtc_update = 0;
unsigned long tsc;
- int delay, offset = 0, lost = 0;
+ int delay = 0, offset = 0, lost = 0;
/*
* Here we are in the timer irq handler. We have irqs locally disabled (so we
write_seqlock(&xtime_lock);
- if (vxtime.hpet_address) {
+ if (vxtime.hpet_address)
+ offset = hpet_readl(HPET_COUNTER);
+
+ if (hpet_use_timer) {
+ /* if we're using the hpet timer functionality,
+ * we can more accurately know the counter value
+ * when the timer interrupt occured.
+ */
offset = hpet_readl(HPET_T0_CMP) - hpet_tick;
delay = hpet_readl(HPET_COUNTER) - offset;
- } else {
+ } else if (!pmtmr_ioport) {
spin_lock(&i8253_lock);
outb_p(0x00, 0x43);
delay = inb_p(0x40);
delay = LATCH - 1 - delay;
}
- rdtscll_sync(&tsc);
+ tsc = get_cycles_sync();
if (vxtime.mode == VXTIME_HPET) {
if (offset - vxtime.last > hpet_tick) {
* off) isn't likely to go away much sooner anyway.
*/
- if ((~time_status & STA_UNSYNC) && xtime.tv_sec > rtc_update &&
+ if (ntp_synced() && xtime.tv_sec > rtc_update &&
abs(xtime.tv_nsec - 500000000) <= tick_nsec / 2) {
set_rtc_mmss(xtime.tv_sec);
rtc_update = xtime.tv_sec + 660;
}
write_sequnlock(&xtime_lock);
+}
+static irqreturn_t timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+{
+ if (apic_runs_main_timer > 1)
+ return IRQ_HANDLED;
+ main_timer_handler(regs);
+#ifdef CONFIG_X86_LOCAL_APIC
+ if (using_apic_timer)
+ smp_send_timer_broadcast_ipi();
+#endif
return IRQ_HANDLED;
}
-static unsigned int cyc2ns_scale;
+static unsigned int cyc2ns_scale __read_mostly;
#define CYC2NS_SCALE_FACTOR 10 /* 2^10, carefully chosen */
-static inline void set_cyc2ns_scale(unsigned long cpu_mhz)
+static inline void set_cyc2ns_scale(unsigned long cpu_khz)
{
- cyc2ns_scale = (1000 << CYC2NS_SCALE_FACTOR)/cpu_mhz;
+ cyc2ns_scale = (1000000 << CYC2NS_SCALE_FACTOR)/cpu_khz;
}
static inline unsigned long long cycles_2_ns(unsigned long long cyc)
return cycles_2_ns(a);
}
-unsigned long get_cmos_time(void)
+static unsigned long get_cmos_time(void)
{
- unsigned int timeout, year, mon, day, hour, min, sec;
- unsigned char last, this;
+ unsigned int year, mon, day, hour, min, sec;
unsigned long flags;
-
-/*
- * The Linux interpretation of the CMOS clock register contents: When the
- * Update-In-Progress (UIP) flag goes from 1 to 0, the RTC registers show the
- * second which has precisely just started. Waiting for this can take up to 1
- * second, we timeout approximately after 2.4 seconds on a machine with
- * standard 8.3 MHz ISA bus.
- */
+ unsigned extyear = 0;
spin_lock_irqsave(&rtc_lock, flags);
- timeout = 1000000;
- last = this = 0;
-
- while (timeout && last && !this) {
- last = this;
- this = CMOS_READ(RTC_FREQ_SELECT) & RTC_UIP;
- timeout--;
- }
-
-/*
- * Here we are safe to assume the registers won't change for a whole second, so
- * we just go ahead and read them.
- */
-
+ do {
sec = CMOS_READ(RTC_SECONDS);
min = CMOS_READ(RTC_MINUTES);
hour = CMOS_READ(RTC_HOURS);
day = CMOS_READ(RTC_DAY_OF_MONTH);
mon = CMOS_READ(RTC_MONTH);
year = CMOS_READ(RTC_YEAR);
+#ifdef CONFIG_ACPI
+ if (acpi_fadt.revision >= FADT2_REVISION_ID &&
+ acpi_fadt.century)
+ extyear = CMOS_READ(acpi_fadt.century);
+#endif
+ } while (sec != CMOS_READ(RTC_SECONDS));
spin_unlock_irqrestore(&rtc_lock, flags);
-/*
- * We know that x86-64 always uses BCD format, no need to check the config
- * register.
- */
-
- BCD_TO_BIN(sec);
- BCD_TO_BIN(min);
- BCD_TO_BIN(hour);
- BCD_TO_BIN(day);
- BCD_TO_BIN(mon);
- BCD_TO_BIN(year);
-
-/*
- * x86-64 systems only exists since 2002.
- * This will work up to Dec 31, 2100
- */
- year += 2000;
+ /*
+ * We know that x86-64 always uses BCD format, no need to check the
+ * config register.
+ */
+
+ BCD_TO_BIN(sec);
+ BCD_TO_BIN(min);
+ BCD_TO_BIN(hour);
+ BCD_TO_BIN(day);
+ BCD_TO_BIN(mon);
+ BCD_TO_BIN(year);
+
+ if (extyear) {
+ BCD_TO_BIN(extyear);
+ year += extyear;
+ printk(KERN_INFO "Extended CMOS year: %d\n", extyear);
+ } else {
+ /*
+ * x86-64 systems only exists since 2002.
+ * This will work up to Dec 31, 2100
+ */
+ year += 2000;
+ }
return mktime(year, mon, day, hour, min, sec);
}
cpufreq_delayed_issched = 1;
if (!warned) {
warned = 1;
- printk(KERN_DEBUG "Losing some ticks... checking if CPU frequency changed.\n");
+ printk(KERN_DEBUG
+ "Losing some ticks... checking if CPU frequency changed.\n");
}
schedule_work(&cpufreq_delayed_get_work);
}
lpj = &dummy;
if (!(freq->flags & CPUFREQ_CONST_LOOPS))
#ifdef CONFIG_SMP
- lpj = &cpu_data[freq->cpu].loops_per_jiffy;
+ lpj = &cpu_data[freq->cpu].loops_per_jiffy;
#else
- lpj = &boot_cpu_data.loops_per_jiffy;
+ lpj = &boot_cpu_data.loops_per_jiffy;
#endif
if (!ref_freq) {
vxtime.tsc_quot = (1000L << 32) / cpu_khz;
}
- set_cyc2ns_scale(cpu_khz_ref / 1000);
+ set_cyc2ns_scale(cpu_khz_ref);
return 0;
}
do {
local_irq_disable();
hpet_now = hpet_readl(HPET_COUNTER);
- sync_core();
- rdtscl(tsc_now);
+ tsc_now = get_cycles_sync();
local_irq_restore(flags);
} while ((tsc_now - tsc_start) < TICK_COUNT &&
(hpet_now - hpet_start) < TICK_COUNT);
outb(0xb0, 0x43);
outb((PIT_TICK_RATE / (1000 / 50)) & 0xff, 0x42);
outb((PIT_TICK_RATE / (1000 / 50)) >> 8, 0x42);
- rdtscll(start);
- sync_core();
+ start = get_cycles_sync();
while ((inb(0x61) & 0x20) == 0);
- sync_core();
- rdtscll(end);
+ end = get_cycles_sync();
spin_unlock_irqrestore(&i8253_lock, flags);
unsigned int ntimer;
if (!vxtime.hpet_address)
- return -1;
+ return 0;
memset(&hd, 0, sizeof (hd));
* Timer0 and Timer1 is used by platform.
*/
hd.hd_phys_address = vxtime.hpet_address;
- hd.hd_address = (void *)fix_to_virt(FIX_HPET_BASE);
+ hd.hd_address = (void __iomem *)fix_to_virt(FIX_HPET_BASE);
hd.hd_nirqs = ntimer;
hd.hd_flags = HPET_DATA_PLATFORM;
hpet_reserve_timer(&hd, 0);
int i;
hpet = (struct hpet *) fix_to_virt(FIX_HPET_BASE);
-
- for (i = 2, timer = &hpet->hpet_timers[2]; i < ntimer;
- timer++, i++)
+ timer = &hpet->hpet_timers[2];
+ for (i = 2; i < ntimer; timer++, i++)
hd.hd_irq[i] = (timer->hpet_config &
Tn_INT_ROUTE_CNF_MASK) >>
Tn_INT_ROUTE_CNF_SHIFT;
* Set up timer 0, as periodic with first interrupt to happen at hpet_tick,
* and period also hpet_tick.
*/
-
- hpet_writel(HPET_TN_ENABLE | HPET_TN_PERIODIC | HPET_TN_SETVAL |
+ if (hpet_use_timer) {
+ hpet_writel(HPET_TN_ENABLE | HPET_TN_PERIODIC | HPET_TN_SETVAL |
HPET_TN_32BIT, HPET_T0_CFG);
- hpet_writel(hpet_tick, HPET_T0_CMP);
- hpet_writel(hpet_tick, HPET_T0_CMP); /* AK: why twice? */
-
+ hpet_writel(hpet_tick, HPET_T0_CMP);
+ hpet_writel(hpet_tick, HPET_T0_CMP); /* AK: why twice? */
+ cfg |= HPET_CFG_LEGACY;
+ }
/*
* Go!
*/
- cfg |= HPET_CFG_ENABLE | HPET_CFG_LEGACY;
+ cfg |= HPET_CFG_ENABLE;
hpet_writel(cfg, HPET_CFG);
return 0;
id = hpet_readl(HPET_ID);
- if (!(id & HPET_ID_VENDOR) || !(id & HPET_ID_NUMBER) ||
- !(id & HPET_ID_LEGSUP))
+ if (!(id & HPET_ID_VENDOR) || !(id & HPET_ID_NUMBER))
return -1;
hpet_period = hpet_readl(HPET_PERIOD);
hpet_tick = (1000000000L * (USEC_PER_SEC / HZ) + hpet_period / 2) /
hpet_period;
+ hpet_use_timer = (id & HPET_ID_LEGSUP);
+
return hpet_timer_stop_set_go(hpet_tick);
}
return hpet_timer_stop_set_go(hpet_tick);
}
-void __init pit_init(void)
+#define PIT_MODE 0x43
+#define PIT_CH0 0x40
+
+static void __init __pit_init(int val, u8 mode)
{
unsigned long flags;
spin_lock_irqsave(&i8253_lock, flags);
- outb_p(0x34, 0x43); /* binary, mode 2, LSB/MSB, ch 0 */
- outb_p(LATCH & 0xff, 0x40); /* LSB */
- outb_p(LATCH >> 8, 0x40); /* MSB */
+ outb_p(mode, PIT_MODE);
+ outb_p(val & 0xff, PIT_CH0); /* LSB */
+ outb_p(val >> 8, PIT_CH0); /* MSB */
spin_unlock_irqrestore(&i8253_lock, flags);
}
+void __init pit_init(void)
+{
+ __pit_init(LATCH, 0x34); /* binary, mode 2, LSB/MSB, ch 0 */
+}
+
+void __init pit_stop_interrupt(void)
+{
+ __pit_init(0, 0x30); /* mode 0 */
+}
+
+void __init stop_timer_interrupt(void)
+{
+ char *name;
+ if (vxtime.hpet_address) {
+ name = "HPET";
+ hpet_timer_stop_set_go(0);
+ } else {
+ name = "PIT";
+ pit_stop_interrupt();
+ }
+ printk(KERN_INFO "timer: %s interrupt stopped.\n", name);
+}
+
int __init time_setup(char *str)
{
report_lost_ticks = 1;
timer_interrupt, SA_INTERRUPT, CPU_MASK_NONE, "timer", NULL, NULL
};
-extern void __init config_acpi_tables(void);
-
void __init time_init(void)
{
char *timename;
+ char *gtod;
#ifdef HPET_HACK_ENABLE_DANGEROUS
if (!vxtime.hpet_address) {
set_normalized_timespec(&wall_to_monotonic,
-xtime.tv_sec, -xtime.tv_nsec);
- if (!hpet_init()) {
- vxtime_hz = (1000000000000000L + hpet_period / 2) /
- hpet_period;
+ if (!hpet_init())
+ vxtime_hz = (1000000000000000L + hpet_period / 2) / hpet_period;
+ else
+ vxtime.hpet_address = 0;
+
+ if (hpet_use_timer) {
+ /* set tick_nsec to use the proper rate for HPET */
+ tick_nsec = TICK_NSEC_HPET;
cpu_khz = hpet_calibrate_tsc();
timename = "HPET";
#ifdef CONFIG_X86_PM_TIMER
- } else if (pmtmr_ioport) {
+ } else if (pmtmr_ioport && !vxtime.hpet_address) {
vxtime_hz = PM_TIMER_FREQUENCY;
timename = "PM";
pit_init();
timename = "PIT";
}
- printk(KERN_INFO "time.c: Using %ld.%06ld MHz %s timer.\n",
- vxtime_hz / 1000000, vxtime_hz % 1000000, timename);
+ vxtime.mode = VXTIME_TSC;
+ gtod = time_init_gtod();
+
+ printk(KERN_INFO "time.c: Using %ld.%06ld MHz WALL %s GTOD %s timer.\n",
+ vxtime_hz / 1000000, vxtime_hz % 1000000, timename, gtod);
printk(KERN_INFO "time.c: Detected %d.%03d MHz processor.\n",
cpu_khz / 1000, cpu_khz % 1000);
- vxtime.mode = VXTIME_TSC;
vxtime.quot = (1000000L << 32) / vxtime_hz;
vxtime.tsc_quot = (1000L << 32) / cpu_khz;
- vxtime.hz = vxtime_hz;
- rdtscll_sync(&vxtime.last_tsc);
+ vxtime.last_tsc = get_cycles_sync();
setup_irq(0, &irq0);
- set_cyc2ns_scale(cpu_khz / 1000);
-
-#ifndef CONFIG_SMP
- time_init_gtod();
-#endif
+ set_cyc2ns_scale(cpu_khz);
}
/*
* Make an educated guess if the TSC is trustworthy and synchronized
* over all CPUs.
*/
-static __init int unsynchronized_tsc(void)
+__cpuinit int unsynchronized_tsc(void)
{
#ifdef CONFIG_SMP
if (oem_force_hpet_timer())
are handled in the OEM check above. */
if (boot_cpu_data.x86_vendor == X86_VENDOR_INTEL)
return 0;
- /* All in a single socket - should be synchronized */
- if (cpus_weight(cpu_core_map[0]) == num_online_cpus())
- return 0;
#endif
/* Assume multi socket systems are not synchronized */
- return num_online_cpus() > 1;
+ return num_present_cpus() > 1;
}
/*
- * Decide after all CPUs are booted what mode gettimeofday should use.
+ * Decide what mode gettimeofday should use.
*/
-void __init time_init_gtod(void)
+__init static char *time_init_gtod(void)
{
char *timetype;
if (unsynchronized_tsc())
notsc = 1;
if (vxtime.hpet_address && notsc) {
- timetype = "HPET";
- vxtime.last = hpet_readl(HPET_T0_CMP) - hpet_tick;
+ timetype = hpet_use_timer ? "HPET" : "PIT/HPET";
+ if (hpet_use_timer)
+ vxtime.last = hpet_readl(HPET_T0_CMP) - hpet_tick;
+ else
+ vxtime.last = hpet_readl(HPET_COUNTER);
vxtime.mode = VXTIME_HPET;
do_gettimeoffset = do_gettimeoffset_hpet;
#ifdef CONFIG_X86_PM_TIMER
printk(KERN_INFO "Disabling vsyscall due to use of PM timer\n");
#endif
} else {
- timetype = vxtime.hpet_address ? "HPET/TSC" : "PIT/TSC";
+ timetype = hpet_use_timer ? "HPET/TSC" : "PIT/TSC";
vxtime.mode = VXTIME_TSC;
}
-
- printk(KERN_INFO "time.c: Using %s based timekeeping.\n", timetype);
+ return timetype;
}
__setup("report_lost_ticks", time_setup);
static long clock_cmos_diff;
static unsigned long sleep_start;
+/*
+ * sysfs support for the timer.
+ */
+
static int timer_suspend(struct sys_device *dev, pm_message_t state)
{
/*
write_seqlock_irqsave(&xtime_lock,flags);
xtime.tv_sec = sec;
xtime.tv_nsec = 0;
+ if (vxtime.mode == VXTIME_HPET) {
+ if (hpet_use_timer)
+ vxtime.last = hpet_readl(HPET_T0_CMP) - hpet_tick;
+ else
+ vxtime.last = hpet_readl(HPET_COUNTER);
+#ifdef CONFIG_X86_PM_TIMER
+ } else if (vxtime.mode == VXTIME_PMTMR) {
+ pmtimer_resume();
+#endif
+ } else
+ vxtime.last_tsc = get_cycles_sync();
write_sequnlock_irqrestore(&xtime_lock,flags);
jiffies += sleep_length;
wall_jiffies += sleep_length;
+ monotonic_base += sleep_length * (NSEC_PER_SEC/HZ);
+ touch_softlockup_watchdog();
return 0;
}
set_kset_name("timer"),
};
-
/* XXX this driverfs stuff should probably go elsewhere later -john */
static struct sys_device device_timer = {
.id = 0,
*/
#include <linux/rtc.h>
-extern irqreturn_t rtc_interrupt(int irq, void *dev_id, struct pt_regs *regs);
-
#define DEFAULT_RTC_INT_FREQ 64
#define RTC_NUM_INTS 1
static unsigned long PIE_count;
static unsigned long hpet_rtc_int_freq; /* RTC interrupt frequency */
+static unsigned int hpet_t1_cmp; /* cached comparator register */
int is_hpet_enabled(void)
{
cnt = hpet_readl(HPET_COUNTER);
cnt += ((hpet_tick*HZ)/hpet_rtc_int_freq);
hpet_writel(cnt, HPET_T1_CMP);
+ hpet_t1_cmp = cnt;
local_irq_restore(flags);
cfg = hpet_readl(HPET_T1_CFG);
- cfg |= HPET_TN_ENABLE | HPET_TN_SETVAL | HPET_TN_32BIT;
+ cfg &= ~HPET_TN_PERIODIC;
+ cfg |= HPET_TN_ENABLE | HPET_TN_32BIT;
hpet_writel(cfg, HPET_T1_CFG);
return 1;
{
unsigned int cfg, cnt;
- if (!(PIE_on | AIE_on | UIE_on))
+ if (unlikely(!(PIE_on | AIE_on | UIE_on))) {
+ cfg = hpet_readl(HPET_T1_CFG);
+ cfg &= ~HPET_TN_ENABLE;
+ hpet_writel(cfg, HPET_T1_CFG);
return;
+ }
if (PIE_on && (PIE_freq > DEFAULT_RTC_INT_FREQ))
hpet_rtc_int_freq = PIE_freq;
hpet_rtc_int_freq = DEFAULT_RTC_INT_FREQ;
/* It is more accurate to use the comparator value than current count.*/
- cnt = hpet_readl(HPET_T1_CMP);
+ cnt = hpet_t1_cmp;
cnt += hpet_tick*HZ/hpet_rtc_int_freq;
hpet_writel(cnt, HPET_T1_CMP);
-
- cfg = hpet_readl(HPET_T1_CFG);
- cfg |= HPET_TN_ENABLE | HPET_TN_SETVAL | HPET_TN_32BIT;
- hpet_writel(cfg, HPET_T1_CFG);
-
- return;
+ hpet_t1_cmp = cnt;
}
/*
}
#endif
-
-
static int __init nohpet_setup(char *s)
{
nohpet = 1;
- return 0;
+ return 1;
}
__setup("nohpet", nohpet_setup);
-
-static int __init notsc_setup(char *s)
+int __init notsc_setup(char *s)
{
notsc = 1;
- return 0;
+ return 1;
}
__setup("notsc", notsc_setup);
-
-
git://git.onelab.eu / linux-2.6.git / blobdiff