* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
- * Questions/Comments/Bugfixes to arrays@compaq.com
+ * Questions/Comments/Bugfixes to iss_storagedev@hp.com
*
* Author: Stephen M. Cameron
*/
through the array controller. Note in particular, neither
physical nor logical disks are presented through the scsi layer. */
-#include "../scsi/scsi.h"
+#include <scsi/scsi.h>
+#include <scsi/scsi_cmnd.h>
+#include <scsi/scsi_device.h>
#include <scsi/scsi_host.h>
#include <asm/atomic.h>
#include <linux/timer.h>
int length, /* length of data in buffer */
int func); /* 0 == read, 1 == write */
-int cciss_scsi_queue_command (Scsi_Cmnd *cmd, void (* done)(Scsi_Cmnd *));
-#if 0
-int cciss_scsi_abort(Scsi_Cmnd *cmd);
-#if defined SCSI_RESET_SYNCHRONOUS && defined SCSI_RESET_ASYNCHRONOUS
-int cciss_scsi_reset(Scsi_Cmnd *cmd, unsigned int reset_flags);
-#else
-int cciss_scsi_reset(Scsi_Cmnd *cmd);
-#endif
-#endif
+int cciss_scsi_queue_command (struct scsi_cmnd *cmd,
+ void (* done)(struct scsi_cmnd *));
static struct cciss_scsi_hba_t ccissscsi[MAX_CTLR] = {
{ .name = "cciss0", .ndevices = 0 },
{ .name = "cciss7", .ndevices = 0 },
};
-static Scsi_Host_Template cciss_driver_template = {
+static struct scsi_host_template cciss_driver_template = {
.module = THIS_MODULE,
.name = "cciss",
.proc_name = "cciss",
if (shba == NULL)
return;
shba->scsi_host = NULL;
- shba->lock = SPIN_LOCK_UNLOCKED;
+ spin_lock_init(&shba->lock);
shba->registered = 0;
if (scsi_cmd_stack_setup(cntl_num, shba) != 0) {
kfree(shba);
static void
complete_scsi_command( CommandList_struct *cp, int timeout, __u32 tag)
{
- Scsi_Cmnd *cmd;
+ struct scsi_cmnd *cmd;
ctlr_info_t *ctlr;
u64bit addr64;
ErrorInfo_struct *ei;
return;
}
- cmd = (Scsi_Cmnd *) cp->scsi_cmd;
+ cmd = (struct scsi_cmnd *) cp->scsi_cmd;
ctlr = hba[cp->ctlr];
/* undo the DMA mappings */
if (cmd->use_sg) {
pci_unmap_sg(ctlr->pdev,
cmd->buffer, cmd->use_sg,
- scsi_to_pci_dma_dir(cmd->sc_data_direction));
+ cmd->sc_data_direction);
}
else if (cmd->request_bufflen) {
addr64.val32.lower = cp->SG[0].Addr.lower;
addr64.val32.upper = cp->SG[0].Addr.upper;
pci_unmap_single(ctlr->pdev, (dma_addr_t) addr64.val,
cmd->request_bufflen,
- scsi_to_pci_dma_dir(cmd->sc_data_direction));
+ cmd->sc_data_direction);
}
cmd->result = (DID_OK << 16); /* host byte */
cciss_scsi_detect(int ctlr)
{
struct Scsi_Host *sh;
+ int error;
sh = scsi_host_alloc(&cciss_driver_template, sizeof(struct ctlr_info *));
if (sh == NULL)
- return 0;
-
+ goto fail;
sh->io_port = 0; // good enough? FIXME,
sh->n_io_port = 0; // I don't think we use these two...
-
sh->this_id = SELF_SCSI_ID;
((struct cciss_scsi_adapter_data_t *)
sh->hostdata[0] = (unsigned long) hba[ctlr];
sh->irq = hba[ctlr]->intr;
sh->unique_id = sh->irq;
- scsi_add_host(sh, &hba[ctlr]->pdev->dev); /* XXX handle failure */
+ error = scsi_add_host(sh, &hba[ctlr]->pdev->dev);
+ if (error)
+ goto fail_host_put;
scsi_scan_host(sh);
-
return 1;
+
+ fail_host_put:
+ scsi_host_put(sh);
+ fail:
+ return 0;
}
static void __exit cleanup_cciss_module(void);
cp->Request.Type.Direction = direction;
/* Fill in the SG list and do dma mapping */
- cciss_map_one(c->pdev, cp,
- (unsigned char *) buf, bufsize,
- scsi_to_pci_dma_dir(SCSI_DATA_READ));
+ cciss_map_one(c->pdev, cp, (unsigned char *) buf,
+ bufsize, DMA_FROM_DEVICE);
cp->waiting = &wait;
wait_for_completion(&wait);
/* undo the dma mapping */
- cciss_unmap_one(c->pdev, cp, bufsize,
- scsi_to_pci_dma_dir(SCSI_DATA_READ));
-
+ cciss_unmap_one(c->pdev, cp, bufsize, DMA_FROM_DEVICE);
return(0);
}
}
-/* cciss_scatter_gather takes a Scsi_Cmnd, (cmd), and does the pci
+/* cciss_scatter_gather takes a struct scsi_cmnd, (cmd), and does the pci
dma mapping and fills in the scatter gather entries of the
cciss command, cp. */
static void
cciss_scatter_gather(struct pci_dev *pdev,
CommandList_struct *cp,
- Scsi_Cmnd *cmd)
+ struct scsi_cmnd *cmd)
{
unsigned int use_sg, nsegs=0, len;
struct scatterlist *scatter = (struct scatterlist *) cmd->buffer;
addr64 = (__u64) pci_map_single(pdev,
cmd->request_buffer,
cmd->request_bufflen,
- scsi_to_pci_dma_dir(cmd->sc_data_direction));
+ cmd->sc_data_direction);
cp->SG[0].Addr.lower =
(__u32) (addr64 & (__u64) 0x00000000FFFFFFFF);
else if (cmd->use_sg <= MAXSGENTRIES) { /* not too many addrs? */
use_sg = pci_map_sg(pdev, cmd->buffer, cmd->use_sg,
- scsi_to_pci_dma_dir(cmd->sc_data_direction));
+ cmd->sc_data_direction);
for (nsegs=0; nsegs < use_sg; nsegs++) {
addr64 = (__u64) sg_dma_address(&scatter[nsegs]);
int
-cciss_scsi_queue_command (Scsi_Cmnd *cmd, void (* done)(Scsi_Cmnd *))
+cciss_scsi_queue_command (struct scsi_cmnd *cmd, void (* done)(struct scsi_cmnd *))
{
ctlr_info_t **c;
int ctlr, rc;
cp->Request.Type.Attribute = ATTR_SIMPLE;
switch(cmd->sc_data_direction)
{
- case SCSI_DATA_WRITE: cp->Request.Type.Direction = XFER_WRITE; break;
- case SCSI_DATA_READ: cp->Request.Type.Direction = XFER_READ; break;
- case SCSI_DATA_NONE: cp->Request.Type.Direction = XFER_NONE; break;
-
- case SCSI_DATA_UNKNOWN:
+ case DMA_TO_DEVICE: cp->Request.Type.Direction = XFER_WRITE; break;
+ case DMA_FROM_DEVICE: cp->Request.Type.Direction = XFER_READ; break;
+ case DMA_NONE: cp->Request.Type.Direction = XFER_NONE; break;
+ case DMA_BIDIRECTIONAL:
// This can happen if a buggy application does a scsi passthru
// and sets both inlen and outlen to non-zero. ( see
// ../scsi/scsi_ioctl.c:scsi_ioctl_send_command() )
git://git.onelab.eu / linux-2.6.git / blobdiff