* handle GCR disks
*/
-#include <linux/config.h>
#include <linux/stddef.h>
#include <linux/kernel.h>
#include <linux/sched.h>
#include <linux/fd.h>
#include <linux/ioctl.h>
#include <linux/blkdev.h>
-#include <linux/devfs_fs_kernel.h>
#include <linux/interrupt.h>
#include <linux/module.h>
#include <linux/spinlock.h>
static void seek_timeout(unsigned long data);
static void settle_timeout(unsigned long data);
static void xfer_timeout(unsigned long data);
-static irqreturn_t swim3_interrupt(int irq, void *dev_id, struct pt_regs *regs);
-/*static void fd_dma_interrupt(int irq, void *dev_id, struct pt_regs *regs);*/
+static irqreturn_t swim3_interrupt(int irq, void *dev_id);
+/*static void fd_dma_interrupt(int irq, void *dev_id);*/
static int grab_drive(struct floppy_state *fs, enum swim_state state,
int interruptible);
static void release_drive(struct floppy_state *fs);
static int floppy_release(struct inode *inode, struct file *filp);
static int floppy_check_change(struct gendisk *disk);
static int floppy_revalidate(struct gendisk *disk);
-static int swim3_add_device(struct device_node *swims);
-int swim3_init(void);
#ifndef CONFIG_PMAC_MEDIABAY
#define check_media_bay(which, what) 1
printk("do_fd_req: dev=%s cmd=%d sec=%ld nr_sec=%ld buf=%p\n",
req->rq_disk->disk_name, req->cmd,
(long)req->sector, req->nr_sectors, req->buffer);
- printk(" rq_status=%d errors=%d current_nr_sectors=%ld\n",
- req->rq_status, req->errors, req->current_nr_sectors);
+ printk(" errors=%d current_nr_sectors=%ld\n",
+ req->errors, req->current_nr_sectors);
#endif
if (req->sector < 0 || req->sector >= fs->total_secs) {
start_request(fs);
}
-static irqreturn_t swim3_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+static irqreturn_t swim3_interrupt(int irq, void *dev_id)
{
struct floppy_state *fs = (struct floppy_state *) dev_id;
struct swim3 __iomem *sw = fs->swim3;
intr = in_8(&sw->intr);
err = (intr & ERROR_INTR)? in_8(&sw->error): 0;
if ((intr & ERROR_INTR) && fs->state != do_transfer)
- printk(KERN_ERR "swim3_interrupt, state=%d, dir=%lx, intr=%x, err=%x\n",
+ printk(KERN_ERR "swim3_interrupt, state=%d, dir=%x, intr=%x, err=%x\n",
fs->state, rq_data_dir(fd_req), intr, err);
switch (fs->state) {
case locating:
if ((stat & ACTIVE) == 0 || resid != 0) {
/* musta been an error */
printk(KERN_ERR "swim3: fd dma: stat=%x resid=%d\n", stat, resid);
- printk(KERN_ERR " state=%d, dir=%lx, intr=%x, err=%x\n",
+ printk(KERN_ERR " state=%d, dir=%x, intr=%x, err=%x\n",
fs->state, rq_data_dir(fd_req), intr, err);
end_request(fd_req, 0);
fs->state = idle;
}
/*
-static void fd_dma_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+static void fd_dma_interrupt(int irq, void *dev_id)
{
}
*/
.revalidate_disk= floppy_revalidate,
};
-int swim3_init(void)
-{
- struct device_node *swim;
- int err = -ENOMEM;
- int i;
-
- devfs_mk_dir("floppy");
-
- swim = find_devices("floppy");
- while (swim && (floppy_count < MAX_FLOPPIES))
- {
- swim3_add_device(swim);
- swim = swim->next;
- }
-
- swim = find_devices("swim3");
- while (swim && (floppy_count < MAX_FLOPPIES))
- {
- swim3_add_device(swim);
- swim = swim->next;
- }
-
- if (!floppy_count)
- return -ENODEV;
-
- for (i = 0; i < floppy_count; i++) {
- disks[i] = alloc_disk(1);
- if (!disks[i])
- goto out;
- }
-
- if (register_blkdev(FLOPPY_MAJOR, "fd")) {
- err = -EBUSY;
- goto out;
- }
-
- swim3_queue = blk_init_queue(do_fd_request, &swim3_lock);
- if (!swim3_queue) {
- err = -ENOMEM;
- goto out_queue;
- }
-
- for (i = 0; i < floppy_count; i++) {
- struct gendisk *disk = disks[i];
- disk->major = FLOPPY_MAJOR;
- disk->first_minor = i;
- disk->fops = &floppy_fops;
- disk->private_data = &floppy_states[i];
- disk->queue = swim3_queue;
- disk->flags |= GENHD_FL_REMOVABLE;
- sprintf(disk->disk_name, "fd%d", i);
- sprintf(disk->devfs_name, "floppy/%d", i);
- set_capacity(disk, 2880);
- add_disk(disk);
- }
- return 0;
-
-out_queue:
- unregister_blkdev(FLOPPY_MAJOR, "fd");
-out:
- while (i--)
- put_disk(disks[i]);
- /* shouldn't we do something with results of swim_add_device()? */
- return err;
-}
-
-static int swim3_add_device(struct device_node *swim)
+static int swim3_add_device(struct macio_dev *mdev, int index)
{
+ struct device_node *swim = mdev->ofdev.node;
struct device_node *mediabay;
- struct floppy_state *fs = &floppy_states[floppy_count];
- struct resource res_reg, res_dma;
+ struct floppy_state *fs = &floppy_states[index];
+ int rc = -EBUSY;
- if (of_address_to_resource(swim, 0, &res_reg) ||
- of_address_to_resource(swim, 1, &res_dma)) {
- printk(KERN_ERR "swim3: Can't get addresses\n");
- return -EINVAL;
+ /* Check & Request resources */
+ if (macio_resource_count(mdev) < 2) {
+ printk(KERN_WARNING "ifd%d: no address for %s\n",
+ index, swim->full_name);
+ return -ENXIO;
}
- if (request_mem_region(res_reg.start, res_reg.end - res_reg.start + 1,
- " (reg)") == NULL) {
- printk(KERN_ERR "swim3: Can't request register space\n");
- return -EINVAL;
+ if (macio_irq_count(mdev) < 2) {
+ printk(KERN_WARNING "fd%d: no intrs for device %s\n",
+ index, swim->full_name);
}
- if (request_mem_region(res_dma.start, res_dma.end - res_dma.start + 1,
- " (dma)") == NULL) {
- release_mem_region(res_reg.start,
- res_reg.end - res_reg.start + 1);
- printk(KERN_ERR "swim3: Can't request DMA space\n");
- return -EINVAL;
+ if (macio_request_resource(mdev, 0, "swim3 (mmio)")) {
+ printk(KERN_ERR "fd%d: can't request mmio resource for %s\n",
+ index, swim->full_name);
+ return -EBUSY;
}
-
- if (swim->n_intrs < 2) {
- printk(KERN_INFO "swim3: expecting 2 intrs (n_intrs:%d)\n",
- swim->n_intrs);
- release_mem_region(res_reg.start,
- res_reg.end - res_reg.start + 1);
- release_mem_region(res_dma.start,
- res_dma.end - res_dma.start + 1);
- return -EINVAL;
+ if (macio_request_resource(mdev, 1, "swim3 (dma)")) {
+ printk(KERN_ERR "fd%d: can't request dma resource for %s\n",
+ index, swim->full_name);
+ macio_release_resource(mdev, 0);
+ return -EBUSY;
}
+ dev_set_drvdata(&mdev->ofdev.dev, fs);
- mediabay = (strcasecmp(swim->parent->type, "media-bay") == 0) ? swim->parent : NULL;
+ mediabay = (strcasecmp(swim->parent->type, "media-bay") == 0) ?
+ swim->parent : NULL;
if (mediabay == NULL)
pmac_call_feature(PMAC_FTR_SWIM3_ENABLE, swim, 0, 1);
memset(fs, 0, sizeof(*fs));
spin_lock_init(&fs->lock);
fs->state = idle;
- fs->swim3 = (struct swim3 __iomem *)ioremap(res_reg.start, 0x200);
- fs->dma = (struct dbdma_regs __iomem *)ioremap(res_dma.start, 0x200);
- fs->swim3_intr = swim->intrs[0].line;
- fs->dma_intr = swim->intrs[1].line;
+ fs->swim3 = (struct swim3 __iomem *)
+ ioremap(macio_resource_start(mdev, 0), 0x200);
+ if (fs->swim3 == NULL) {
+ printk("fd%d: couldn't map registers for %s\n",
+ index, swim->full_name);
+ rc = -ENOMEM;
+ goto out_release;
+ }
+ fs->dma = (struct dbdma_regs __iomem *)
+ ioremap(macio_resource_start(mdev, 1), 0x200);
+ if (fs->dma == NULL) {
+ printk("fd%d: couldn't map DMA for %s\n",
+ index, swim->full_name);
+ iounmap(fs->swim3);
+ rc = -ENOMEM;
+ goto out_release;
+ }
+ fs->swim3_intr = macio_irq(mdev, 0);
+ fs->dma_intr = macio_irq(mdev, 1);;
fs->cur_cyl = -1;
fs->cur_sector = -1;
fs->secpercyl = 36;
st_le16(&fs->dma_cmd[1].command, DBDMA_STOP);
if (request_irq(fs->swim3_intr, swim3_interrupt, 0, "SWIM3", fs)) {
- printk(KERN_ERR "Couldn't get irq %d for SWIM3\n", fs->swim3_intr);
+ printk(KERN_ERR "fd%d: couldn't request irq %d for %s\n",
+ index, fs->swim3_intr, swim->full_name);
pmac_call_feature(PMAC_FTR_SWIM3_ENABLE, swim, 0, 0);
+ goto out_unmap;
return -EBUSY;
}
/*
if (request_irq(fs->dma_intr, fd_dma_interrupt, 0, "SWIM3-dma", fs)) {
printk(KERN_ERR "Couldn't get irq %d for SWIM3 DMA",
fs->dma_intr);
- pmac_call_feature(PMAC_FTR_SWIM3_ENABLE, swim, 0, 0);
return -EBUSY;
}
*/
printk(KERN_INFO "fd%d: SWIM3 floppy controller %s\n", floppy_count,
mediabay ? "in media bay" : "");
- floppy_count++;
-
+ return 0;
+
+ out_unmap:
+ iounmap(fs->dma);
+ iounmap(fs->swim3);
+
+ out_release:
+ macio_release_resource(mdev, 0);
+ macio_release_resource(mdev, 1);
+
+ return rc;
+}
+
+static int __devinit swim3_attach(struct macio_dev *mdev, const struct of_device_id *match)
+{
+ int i, rc;
+ struct gendisk *disk;
+
+ /* Add the drive */
+ rc = swim3_add_device(mdev, floppy_count);
+ if (rc)
+ return rc;
+
+ /* Now create the queue if not there yet */
+ if (swim3_queue == NULL) {
+ /* If we failed, there isn't much we can do as the driver is still
+ * too dumb to remove the device, just bail out
+ */
+ if (register_blkdev(FLOPPY_MAJOR, "fd"))
+ return 0;
+ swim3_queue = blk_init_queue(do_fd_request, &swim3_lock);
+ if (swim3_queue == NULL) {
+ unregister_blkdev(FLOPPY_MAJOR, "fd");
+ return 0;
+ }
+ }
+
+ /* Now register that disk. Same comment about failure handling */
+ i = floppy_count++;
+ disk = disks[i] = alloc_disk(1);
+ if (disk == NULL)
+ return 0;
+
+ disk->major = FLOPPY_MAJOR;
+ disk->first_minor = i;
+ disk->fops = &floppy_fops;
+ disk->private_data = &floppy_states[i];
+ disk->queue = swim3_queue;
+ disk->flags |= GENHD_FL_REMOVABLE;
+ sprintf(disk->disk_name, "fd%d", i);
+ set_capacity(disk, 2880);
+ add_disk(disk);
+
+ return 0;
+}
+
+static struct of_device_id swim3_match[] =
+{
+ {
+ .name = "swim3",
+ },
+ {
+ .compatible = "ohare-swim3"
+ },
+ {
+ .compatible = "swim3"
+ },
+};
+
+static struct macio_driver swim3_driver =
+{
+ .name = "swim3",
+ .match_table = swim3_match,
+ .probe = swim3_attach,
+#if 0
+ .suspend = swim3_suspend,
+ .resume = swim3_resume,
+#endif
+};
+
+
+int swim3_init(void)
+{
+ macio_register_driver(&swim3_driver);
return 0;
}
git://git.onelab.eu / linux-2.6.git / blobdiff