depends on VT && !S390 && !UML
default y
+config VT_HW_CONSOLE_BINDING
+ bool "Support for binding and unbinding console drivers"
+ depends on HW_CONSOLE
+ default n
+ ---help---
+ The virtual terminal is the device that interacts with the physical
+ terminal through console drivers. On these systems, at least one
+ console driver is loaded. In other configurations, additional console
+ drivers may be enabled, such as the framebuffer console. If more than
+ 1 console driver is enabled, setting this to 'y' will allow you to
+ select the console driver that will serve as the backend for the
+ virtual terminals.
+
+ See <file:Documentation/console/console.txt> for more
+ information. For framebuffer console users, please refer to
+ <file:Documentation/fb/fbcon.txt>.
+
config SERIAL_NONSTANDARD
bool "Non-standard serial port support"
---help---
config COMPUTONE
tristate "Computone IntelliPort Plus serial support"
- depends on SERIAL_NONSTANDARD
+ depends on SERIAL_NONSTANDARD && (ISA || EISA || PCI)
---help---
This driver supports the entire family of Intelliport II/Plus
controllers with the exception of the MicroChannel controllers and
The module will be called mxser. If you want to do that, say M
here.
+config MOXA_SMARTIO_NEW
+ tristate "Moxa SmartIO support v. 2.0 (EXPERIMENTAL)"
+ depends on SERIAL_NONSTANDARD && (PCI || EISA || ISA)
+ help
+ Say Y here if you have a Moxa SmartIO multiport serial card and/or
+ want to help develop a new version of this driver.
+
+ This is upgraded (1.9.1) driver from original Moxa drivers with
+ changes finally resulting in PCI probing.
+
+ Use at your own risk.
+
+ This driver can also be built as a module. The module will be called
+ mxser_new. If you want to do that, say M here.
+
config ISI
tristate "Multi-Tech multiport card support (EXPERIMENTAL)"
- depends on SERIAL_NONSTANDARD
+ depends on SERIAL_NONSTANDARD && PCI
select FW_LOADER
help
This is a driver for the Multi-Tech cards which provide several
config SX
tristate "Specialix SX (and SI) card support"
- depends on SERIAL_NONSTANDARD
+ depends on SERIAL_NONSTANDARD && (PCI || EISA || ISA)
help
This is a driver for the SX and SI multiport serial cards.
Please read the file <file:Documentation/sx.txt> for details.
config RIO
tristate "Specialix RIO system support"
- depends on SERIAL_NONSTANDARD && BROKEN_ON_SMP && !64BIT
+ depends on SERIAL_NONSTANDARD
help
This is a driver for the Specialix RIO, a smart serial card which
drives an outboard box that can support up to 128 ports. Product
If you have an Alchemy AU1000 processor (MIPS based) and you want
to use a console on a serial port, say Y. Otherwise, say N.
-config QTRONIX_KEYBOARD
- bool "Enable Qtronix 990P Keyboard Support"
- depends on IT8712
- help
- Images of Qtronix keyboards are at
- <http://www.qtronix.com/keyboard.html>.
-
-config IT8172_CIR
- bool
- depends on QTRONIX_KEYBOARD
- default y
-
-config IT8172_SCR0
- bool "Enable Smart Card Reader 0 Support "
- depends on IT8712
- help
- Say Y here to support smart-card reader 0 (SCR0) on the Integrated
- Technology Express, Inc. ITE8172 SBC. Vendor page at
- <http://www.ite.com.tw/ia/brief_it8172bsp.htm>; picture of the
- board at <http://www.mvista.com/partners/semiconductor/ite.html>.
-
-config IT8172_SCR1
- bool "Enable Smart Card Reader 1 Support "
- depends on IT8712
- help
- Say Y here to support smart-card reader 1 (SCR1) on the Integrated
- Technology Express, Inc. ITE8172 SBC. Vendor page at
- <http://www.ite.com.tw/ia/brief_it8172bsp.htm>; picture of the
- board at <http://www.mvista.com/partners/semiconductor/ite.html>.
-
config A2232
tristate "Commodore A2232 serial support (EXPERIMENTAL)"
depends on EXPERIMENTAL && ZORRO && BROKEN_ON_SMP
security. This option enables these legacy devices; on most
systems, it is safe to say N.
+config CRASH
+ tristate "Crash Utility memory driver"
config LEGACY_PTY_COUNT
int "Maximum number of legacy PTY in use"
When not in use, each legacy PTY occupies 12 bytes on 32-bit
architectures and 24 bytes on 64-bit architectures.
+config BRIQ_PANEL
+ tristate 'Total Impact briQ front panel driver'
+ depends on PPC_CHRP
+ ---help---
+ The briQ is a small footprint CHRP computer with a frontpanel VFD, a
+ tristate led and two switches. It is the size of a CDROM drive.
+
+ If you have such one and want anything showing on the VFD then you
+ must answer Y here.
+
+ To compile this driver as a module, choose M here: the
+ module will be called briq_panel.
+
+ It's safe to say N here.
+
config PRINTER
tristate "Parallel printer support"
depends on PARPORT
If unsure, say N.
+config HVC_DRIVER
+ bool
+ help
+ Users of pSeries machines that want to utilize the hvc console front-end
+ module for their backend console driver should select this option.
+ It will automatically be selected if one of the back-end console drivers
+ is selected.
+
+
config HVC_CONSOLE
bool "pSeries Hypervisor Virtual Console support"
depends on PPC_PSERIES
+ select HVC_DRIVER
help
pSeries machines when partitioned support a hypervisor virtual
console. This driver allows each pSeries partition to have a console
which is accessed via the HMC.
+config HVC_ISERIES
+ bool "iSeries Hypervisor Virtual Console support"
+ depends on PPC_ISERIES && !VIOCONS
+ select HVC_DRIVER
+ help
+ iSeries machines support a hypervisor virtual console.
+
+config HVC_RTAS
+ bool "IBM RTAS Console support"
+ depends on PPC_RTAS
+ select HVC_DRIVER
+ help
+ IBM Console device driver which makes use of RTAS
+
config HVCS
tristate "IBM Hypervisor Virtual Console Server support"
depends on PPC_PSERIES
If you're not sure, say N.
-config HW_RANDOM
- tristate "Intel/AMD/VIA HW Random Number Generator support"
- depends on (X86 || IA64) && PCI
- ---help---
- This driver provides kernel-side support for the Random Number
- Generator hardware found on Intel i8xx-based motherboards,
- AMD 76x-based motherboards, and Via Nehemiah CPUs.
-
- Provides a character driver, used to read() entropy data.
-
- To compile this driver as a module, choose M here: the
- module will be called hw_random.
-
- If unsure, say N.
+source "drivers/char/hw_random/Kconfig"
config NVRAM
tristate "/dev/nvram support"
config RTC
tristate "Enhanced Real Time Clock Support"
- depends on !PPC32 && !PARISC && !IA64 && !M68K && (!SPARC || PCI) && !FRV
+ depends on !PPC && !PARISC && !IA64 && !M68K && (!SPARC || PCI) && !FRV && !ARM && !SUPERH
---help---
If you say Y here and create a character special file /dev/rtc with
major number 10 and minor number 135 using mknod ("man mknod"), you
will get access to the real time clock (or hardware clock) built
into your computer.
-config S3C2410_RTC
- bool "S3C2410 RTC Driver"
- depends on ARCH_S3C2410
- help
- RTC (Realtime Clock) driver for the clock inbuilt into the
- Samsung S3C2410. This can provide periodic interrupt rates
- from 1Hz to 64Hz for user programs, and wakeup from Alarm.
-
-config RTC_VR41XX
- tristate "NEC VR4100 series Real Time Clock Support"
- depends on CPU_VR41XX
-
config COBALT_LCD
bool "Support for Cobalt LCD"
depends on MIPS_COBALT
config TANBAC_TB0219
tristate "TANBAC TB0219 base board support"
- depends TANBAC_TB022X
-
-menu "Ftape, the floppy tape device driver"
-
-config FTAPE
- tristate "Ftape (QIC-80/Travan) support"
- depends on BROKEN_ON_SMP && (ALPHA || X86)
- ---help---
- If you have a tape drive that is connected to your floppy
- controller, say Y here.
-
- Some tape drives (like the Seagate "Tape Store 3200" or the Iomega
- "Ditto 3200" or the Exabyte "Eagle TR-3") come with a "high speed"
- controller of their own. These drives (and their companion
- controllers) are also supported if you say Y here.
-
- If you have a special controller (such as the CMS FC-10, FC-20,
- Mountain Mach-II, or any controller that is based on the Intel 82078
- FDC like the high speed controllers by Seagate and Exabyte and
- Iomega's "Ditto Dash") you must configure it by selecting the
- appropriate entries from the "Floppy tape controllers" sub-menu
- below and possibly modify the default values for the IRQ and DMA
- channel and the IO base in ftape's configuration menu.
-
- If you want to use your floppy tape drive on a PCI-bus based system,
- please read the file <file:drivers/char/ftape/README.PCI>.
-
- The ftape kernel driver is also available as a runtime loadable
- module. To compile this driver as a module, choose M here: the
- module will be called ftape.
-
-source "drivers/char/ftape/Kconfig"
-
-endmenu
+ depends on TANBAC_TB022X
+ select GPIO_VR41XX
source "drivers/char/agp/Kconfig"
config SCx200_GPIO
tristate "NatSemi SCx200 GPIO Support"
depends on SCx200
+ select NSC_GPIO
help
Give userspace access to the GPIO pins on the National
Semiconductor SCx200 processors.
If compiled as a module, it will be called scx200_gpio.
+config PC8736x_GPIO
+ tristate "NatSemi PC8736x GPIO Support"
+ depends on X86
+ default SCx200_GPIO # mostly N
+ select NSC_GPIO # needed for support routines
+ help
+ Give userspace access to the GPIO pins on the National
+ Semiconductor PC-8736x (x=[03456]) SuperIO chip. The chip
+ has multiple functional units, inc several managed by
+ hwmon/pc87360 driver. Tested with PC-87366
+
+ If compiled as a module, it will be called pc8736x_gpio.
+
+config NSC_GPIO
+ tristate "NatSemi Base GPIO Support"
+ depends on X86_32
+ # selected by SCx200_GPIO and PC8736x_GPIO
+ # what about 2 selectors differing: m != y
+ help
+ Common support used (and needed) by scx200_gpio and
+ pc8736x_gpio drivers. If those drivers are built as
+ modules, this one will be too, named nsc_gpio
+
config CS5535_GPIO
tristate "AMD CS5535/CS5536 GPIO (Geode Companion Device)"
depends on X86_32
config RAW_DRIVER
tristate "RAW driver (/dev/raw/rawN) (OBSOLETE)"
+ depends on BLOCK
help
The raw driver permits block devices to be bound to /dev/raw/rawN.
Once bound, I/O against /dev/raw/rawN uses efficient zero-copy I/O.
help
If you say Y here, you will have a miscdevice named "/dev/hpet/". Each
open selects one of the timers supported by the HPET. The timers are
- non-periodioc and/or periodic.
+ non-periodic and/or periodic.
config HPET_RTC_IRQ
bool "HPET Control RTC IRQ" if !HPET_EMULATE_RTC
config TELCLOCK
tristate "Telecom clock driver for MPBL0010 ATCA SBC"
- depends on EXPERIMENTAL
+ depends on EXPERIMENTAL && X86
default n
help
The telecom clock device is specific to the MPBL0010 ATCA computer and
git://git.onelab.eu / linux-2.6.git / blobdiff