/* Sanity checks */
-#define SERIAL_INLINE
-
#if defined(MODULE) && defined(SERIAL_DEBUG_MCOUNT)
#define DBG_CNT(s) printk("(%s): [%x] refc=%d, serc=%d, ttyc=%d -> %s\n", \
tty->name, (info->flags), serial_driver->refcount,info->count,tty->count,s)
#include <asm/amigahw.h>
#include <asm/amigaints.h>
-#ifdef SERIAL_INLINE
-#define _INLINE_ inline
-#endif
-
+#define custom amiga_custom
static char *serial_name = "Amiga-builtin serial driver";
static struct tty_driver *serial_driver;
static struct serial_state rs_table[1];
-#define NR_PORTS (sizeof(rs_table)/sizeof(struct serial_state))
+#define NR_PORTS ARRAY_SIZE(rs_table)
/*
* tmp_buf is used as a temporary buffer by serial_write. We need to
* memory if large numbers of serial ports are open.
*/
static unsigned char *tmp_buf;
-static DECLARE_MUTEX(tmp_buf_sem);
#include <asm/uaccess.h>
* This routine is used by the interrupt handler to schedule
* processing in the software interrupt portion of the driver.
*/
-static _INLINE_ void rs_sched_event(struct async_struct *info,
- int event)
+static void rs_sched_event(struct async_struct *info,
+ int event)
{
info->event |= 1 << event;
tasklet_schedule(&info->tlet);
}
-static _INLINE_ void receive_chars(struct async_struct *info)
+static void receive_chars(struct async_struct *info)
{
int status;
int serdatr;
struct tty_struct *tty = info->tty;
- unsigned char ch;
+ unsigned char ch, flag;
struct async_icount *icount;
+ int oe = 0;
icount = &info->state->icount;
status |= UART_LSR_OE;
ch = serdatr & 0xff;
- if (tty->flip.count >= TTY_FLIPBUF_SIZE)
- goto ignore_char;
- *tty->flip.char_buf_ptr = ch;
icount->rx++;
#ifdef SERIAL_DEBUG_INTR
printk("DR%02x:%02x...", ch, status);
#endif
- *tty->flip.flag_buf_ptr = 0;
+ flag = TTY_NORMAL;
/*
* We don't handle parity or frame errors - but I have left
* should be ignored.
*/
if (status & info->ignore_status_mask)
- goto ignore_char;
+ goto out;
status &= info->read_status_mask;
#ifdef SERIAL_DEBUG_INTR
printk("handling break....");
#endif
- *tty->flip.flag_buf_ptr = TTY_BREAK;
+ flag = TTY_BREAK;
if (info->flags & ASYNC_SAK)
do_SAK(tty);
} else if (status & UART_LSR_PE)
- *tty->flip.flag_buf_ptr = TTY_PARITY;
+ flag = TTY_PARITY;
else if (status & UART_LSR_FE)
- *tty->flip.flag_buf_ptr = TTY_FRAME;
+ flag = TTY_FRAME;
if (status & UART_LSR_OE) {
/*
* Overrun is special, since it's
* reported immediately, and doesn't
* affect the current character
*/
- if (tty->flip.count < TTY_FLIPBUF_SIZE) {
- tty->flip.count++;
- tty->flip.flag_buf_ptr++;
- tty->flip.char_buf_ptr++;
- *tty->flip.flag_buf_ptr = TTY_OVERRUN;
- }
+ oe = 1;
}
}
- tty->flip.flag_buf_ptr++;
- tty->flip.char_buf_ptr++;
- tty->flip.count++;
- ignore_char:
-
+ tty_insert_flip_char(tty, ch, flag);
+ if (oe == 1)
+ tty_insert_flip_char(tty, 0, TTY_OVERRUN);
tty_flip_buffer_push(tty);
+out:
+ return;
}
-static _INLINE_ void transmit_chars(struct async_struct *info)
+static void transmit_chars(struct async_struct *info)
{
custom.intreq = IF_TBE;
mb();
}
}
-static _INLINE_ void check_modem_status(struct async_struct *info)
+static void check_modem_status(struct async_struct *info)
{
unsigned char status = ciab.pra & (SER_DCD | SER_CTS | SER_DSR);
unsigned char dstatus;
static void rs_put_char(struct tty_struct *tty, unsigned char ch)
{
- struct async_struct *info = (struct async_struct *)tty->driver_data;
+ struct async_struct *info;
unsigned long flags;
+ if (!tty)
+ return;
+
+ info = tty->driver_data;
+
if (serial_paranoia_check(info, tty->name, "rs_put_char"))
return;
- if (!tty || !info->xmit.buf)
+ if (!info->xmit.buf)
return;
local_irq_save(flags);
static int rs_write(struct tty_struct * tty, const unsigned char *buf, int count)
{
int c, ret = 0;
- struct async_struct *info = (struct async_struct *)tty->driver_data;
+ struct async_struct *info;
unsigned long flags;
+ if (!tty)
+ return 0;
+
+ info = tty->driver_data;
+
if (serial_paranoia_check(info, tty->name, "rs_write"))
return 0;
- if (!tty || !info->xmit.buf || !tmp_buf)
+ if (!info->xmit.buf || !tmp_buf)
return 0;
local_save_flags(flags);
*/
static int get_serial_info(struct async_struct * info,
- struct serial_struct * retinfo)
+ struct serial_struct __user * retinfo)
{
struct serial_struct tmp;
struct serial_state *state = info->state;
}
static int set_serial_info(struct async_struct * info,
- struct serial_struct * new_info)
+ struct serial_struct __user * new_info)
{
struct serial_struct new_serial;
struct serial_state old_state, *state;
* transmit holding register is empty. This functionality
* allows an RS485 driver to be written in user space.
*/
-static int get_lsr_info(struct async_struct * info, unsigned int *value)
+static int get_lsr_info(struct async_struct * info, unsigned int __user *value)
{
unsigned char status;
unsigned int result;
struct async_struct * info = (struct async_struct *)tty->driver_data;
struct async_icount cprev, cnow; /* kernel counter temps */
struct serial_icounter_struct icount;
+ void __user *argp = (void __user *)arg;
unsigned long flags;
if (serial_paranoia_check(info, tty->name, "rs_ioctl"))
switch (cmd) {
case TIOCGSERIAL:
- return get_serial_info(info,
- (struct serial_struct *) arg);
+ return get_serial_info(info, argp);
case TIOCSSERIAL:
- return set_serial_info(info,
- (struct serial_struct *) arg);
+ return set_serial_info(info, argp);
case TIOCSERCONFIG:
return 0;
case TIOCSERGETLSR: /* Get line status register */
- return get_lsr_info(info, (unsigned int *) arg);
+ return get_lsr_info(info, argp);
case TIOCSERGSTRUCT:
- if (copy_to_user((struct async_struct *) arg,
+ if (copy_to_user(argp,
info, sizeof(struct async_struct)))
return -EFAULT;
return 0;
icount.brk = cnow.brk;
icount.buf_overrun = cnow.buf_overrun;
- if (copy_to_user((void *)arg, &icount, sizeof(icount)))
+ if (copy_to_user(argp, &icount, sizeof(icount)))
return -EFAULT;
return 0;
case TIOCSERGWILD:
* number, and identifies which options were configured into this
* driver.
*/
-static _INLINE_ void show_serial_version(void)
+static void show_serial_version(void)
{
printk(KERN_INFO "%s version %s\n", serial_name, serial_version);
}
-int register_serial(struct serial_struct *req);
-void unregister_serial(int line);
-
-
static struct tty_operations serial_ops = {
.open = rs_open,
.close = rs_close,
state->icount.rx = state->icount.tx = 0;
state->icount.frame = state->icount.parity = 0;
state->icount.overrun = state->icount.brk = 0;
- /*
- if(state->port && check_region(state->port,REGION_LENGTH(state)))
- continue;
- */
printk(KERN_INFO "ttyS%d is the amiga builtin serial port\n",
state->line);
git://git.onelab.eu / linux-2.6.git / blobdiff