-/*****************************************************************************/
/*
- * mxser.c -- MOXA Smartio family multiport serial driver.
+ * mxser.c -- MOXA Smartio/Industio family multiport serial driver.
*
- * Copyright (C) 1999-2000 Moxa Technologies (support@moxa.com.tw).
+ * Copyright (C) 1999-2001 Moxa Technologies (support@moxa.com.tw).
*
* This code is loosely based on the Linux serial driver, written by
* Linus Torvalds, Theodore T'so and others.
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
+* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-/*
- * MOXA Smartio Family Serial Driver
*
- * Copyright (C) 1999,2000 Moxa Technologies Co., LTD.
+ * Original release 10/26/00
*
- * for : LINUX 2.0.X, 2.2.X, 2.4.X
- * date : 2001/05/01
- * version : 1.2
- *
- * Fixes for C104H/PCI by Tim Hockin <thockin@sun.com>
- * Added support for: C102, CI-132, CI-134, CP-132, CP-114, CT-114 cards
- * by Damian Wrobel <dwrobel@ertel.com.pl>
+ * 02/06/01 Support MOXA Industio family boards.
+ * 02/06/01 Support TIOCGICOUNT.
+ * 02/06/01 Fix the problem for connecting to serial mouse.
+ * 02/06/01 Fix the problem for H/W flow control.
+ * 02/06/01 Fix the compling warning when CONFIG_PCI
+ * don't be defined.
*
- * Added support for serial card CP104
- * by James Nelson Provident Solutions <linux-info@provident-solutions.com>
+ * Fed through a cleanup, indent and remove of non 2.6 code by Alan Cox
+ * <alan@redhat.com>. The original 1.8 code is available on www.moxa.com.
+ * - Fixed x86_64 cleanness
+ * - Fixed sleep with spinlock held in mxser_send_break
*/
+
#include <linux/config.h>
#include <linux/module.h>
+#include <linux/version.h>
+#include <linux/autoconf.h>
#include <linux/errno.h>
#include <linux/signal.h>
#include <linux/sched.h>
#include <linux/string.h>
#include <linux/fcntl.h>
#include <linux/ptrace.h>
+#include <linux/gfp.h>
#include <linux/ioport.h>
#include <linux/mm.h>
#include <linux/smp_lock.h>
+#include <linux/delay.h>
#include <linux/pci.h>
-#include <linux/init.h>
#include <asm/system.h>
#include <asm/io.h>
#include <asm/irq.h>
+#include <asm/segment.h>
#include <asm/bitops.h>
#include <asm/uaccess.h>
-#define MXSER_VERSION "1.2.1"
-
-#define MXSERMAJOR 174
-#define MXSERCUMAJOR 175
+#include "mxser.h"
+#define MXSER_VERSION "1.8"
+#define MXSERMAJOR 174
+#define MXSERCUMAJOR 175
#define MXSER_EVENT_TXLOW 1
#define MXSER_EVENT_HANGUP 2
+#define MXSER_BOARDS 4 /* Max. boards */
+#define MXSER_PORTS 32 /* Max. ports */
+#define MXSER_PORTS_PER_BOARD 8 /* Max. ports per board */
+#define MXSER_ISR_PASS_LIMIT 256
-#define SERIAL_DO_RESTART
-
-#define MXSER_BOARDS 4 /* Max. boards */
-#define MXSER_PORTS 32 /* Max. ports */
-#define MXSER_PORTS_PER_BOARD 8 /* Max. ports per board */
-#define MXSER_ISR_PASS_LIMIT 256
-
-#define MXSER_ERR_IOADDR -1
-#define MXSER_ERR_IRQ -2
-#define MXSER_ERR_IRQ_CONFLIT -3
-#define MXSER_ERR_VECTOR -4
-
-#define SERIAL_TYPE_NORMAL 1
+#define MXSER_ERR_IOADDR -1
+#define MXSER_ERR_IRQ -2
+#define MXSER_ERR_IRQ_CONFLIT -3
+#define MXSER_ERR_VECTOR -4
-#define WAKEUP_CHARS 256
+#define SERIAL_TYPE_NORMAL 1
+#define SERIAL_TYPE_CALLOUT 2
-#define UART_MCR_AFE 0x20
-#define UART_LSR_SPECIAL 0x1E
+#define WAKEUP_CHARS 256
-#define PORTNO(x) ((x)->index)
+#define UART_MCR_AFE 0x20
+#define UART_LSR_SPECIAL 0x1E
-#define RELEVANT_IFLAG(iflag) (iflag & (IGNBRK|BRKINT|IGNPAR|PARMRK|INPCK))
+#define RELEVANT_IFLAG(iflag) (iflag & (IGNBRK|BRKINT|IGNPAR|PARMRK|INPCK|IXON|IXOFF))
#define IRQ_T(info) ((info->flags & ASYNC_SHARE_IRQ) ? SA_SHIRQ : SA_INTERRUPT)
-/*
- * Define the Moxa PCI vendor and device IDs.
- */
-
-#ifndef PCI_VENDOR_ID_MOXA
-#define PCI_VENDOR_ID_MOXA 0x1393
-#endif
-#ifndef PCI_DEVICE_ID_C168
-#define PCI_DEVICE_ID_C168 0x1680
-#endif
-#ifndef PCI_DEVICE_ID_C104
-#define PCI_DEVICE_ID_C104 0x1040
-#endif
-#ifndef PCI_DEVICE_ID_CP104
-#define PCI_DEVICE_ID_CP104 0x1041
-#endif
-#ifndef PCI_DEVICE_ID_CP132
-#define PCI_DEVICE_ID_CP132 0x1320
-#endif
-#ifndef PCI_DEVICE_ID_CP114
-#define PCI_DEVICE_ID_CP114 0x1141
-#endif
-#ifndef PCI_DEVICE_ID_CT114
-#define PCI_DEVICE_ID_CT114 0x1140
-#endif
-
#define C168_ASIC_ID 1
#define C104_ASIC_ID 2
-#define CI134_ASIC_ID 3
-#define CI132_ASIC_ID 4
-#define CI104J_ASIC_ID 5
#define C102_ASIC_ID 0xB
+#define CI132_ASIC_ID 4
+#define CI134_ASIC_ID 3
+#define CI104J_ASIC_ID 5
enum {
- MXSER_BOARD_C168_ISA = 0,
+ MXSER_BOARD_C168_ISA = 1,
MXSER_BOARD_C104_ISA,
MXSER_BOARD_CI104J,
MXSER_BOARD_C168_PCI,
MXSER_BOARD_C104_PCI,
- MXSER_BOARD_CP104_PCI,
MXSER_BOARD_C102_ISA,
MXSER_BOARD_CI132,
MXSER_BOARD_CI134,
- MXSER_BOARD_CP132_PCI,
- MXSER_BOARD_CP114_PCI,
- MXSER_BOARD_CT114_PCI
+ MXSER_BOARD_CP132,
+ MXSER_BOARD_CP114,
+ MXSER_BOARD_CT114,
+ MXSER_BOARD_CP102,
+ MXSER_BOARD_CP104U,
+ MXSER_BOARD_CP168U,
+ MXSER_BOARD_CP132U,
+ MXSER_BOARD_CP134U,
+ MXSER_BOARD_CP104JU,
+ MXSER_BOARD_RC7000,
+ MXSER_BOARD_CP118U,
+ MXSER_BOARD_CP102UL,
+ MXSER_BOARD_CP102U,
};
-static char *mxser_brdname[] =
-{
+static char *mxser_brdname[] = {
"C168 series",
"C104 series",
"CI-104J series",
"C168H/PCI series",
"C104H/PCI series",
- "CP104/PCI series",
"C102 series",
"CI-132 series",
"CI-134 series",
"CP-132 series",
"CP-114 series",
- "CT-114 series"
+ "CT-114 series",
+ "CP-102 series",
+ "CP-104U series",
+ "CP-168U series",
+ "CP-132U series",
+ "CP-134U series",
+ "CP-104JU series",
+ "Moxa UC7000 Serial",
+ "CP-118U series",
+ "CP-102UL series",
+ "CP-102U series",
};
-static int mxser_numports[] =
-{
- 8,
- 4,
- 4,
- 8,
- 4,
- 4,
- 2,
- 2,
- 4,
- 2,
- 4,
- 4
+static int mxser_numports[] = {
+ 8, // C168-ISA
+ 4, // C104-ISA
+ 4, // CI104J
+ 8, // C168-PCI
+ 4, // C104-PCI
+ 2, // C102-ISA
+ 2, // CI132
+ 4, // CI134
+ 2, // CP132
+ 4, // CP114
+ 4, // CT114
+ 2, // CP102
+ 4, // CP104U
+ 8, // CP168U
+ 2, // CP132U
+ 4, // CP134U
+ 4, // CP104JU
+ 8, // RC7000
+ 8, // CP118U
+ 2, // CP102UL
+ 2, // CP102U
+};
+
+#define UART_TYPE_NUM 2
+
+unsigned int Gmoxa_uart_id[UART_TYPE_NUM] = {
+ MOXA_MUST_MU150_HWID,
+ MOXA_MUST_MU860_HWID
+};
+
+// This is only for PCI
+#define UART_INFO_NUM 3
+struct mxpciuart_info {
+ int type;
+ int tx_fifo;
+ int rx_fifo;
+ int xmit_fifo_size;
+ int rx_high_water;
+ int rx_trigger;
+ int rx_low_water;
+ long max_baud;
+};
+
+struct mxpciuart_info Gpci_uart_info[UART_INFO_NUM] = {
+ {MOXA_OTHER_UART, 16, 16, 16, 14, 14, 1, 921600L},
+ {MOXA_MUST_MU150_HWID, 64, 64, 64, 48, 48, 16, 230400L},
+ {MOXA_MUST_MU860_HWID, 128, 128, 128, 96, 96, 32, 921600L}
};
-/*
- * MOXA ioctls
- */
-#define MOXA 0x400
-#define MOXA_GETDATACOUNT (MOXA + 23)
-#define MOXA_GET_CONF (MOXA + 35)
-#define MOXA_DIAGNOSE (MOXA + 50)
-#define MOXA_CHKPORTENABLE (MOXA + 60)
-#define MOXA_HighSpeedOn (MOXA + 61)
-#define MOXA_GET_MAJOR (MOXA + 63)
-#define MOXA_GET_CUMAJOR (MOXA + 64)
-#define MOXA_GETMSTATUS (MOXA + 65)
#ifdef CONFIG_PCI
+
static struct pci_device_id mxser_pcibrds[] = {
- { PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_C168, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- MXSER_BOARD_C168_PCI },
- { PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_C104, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- MXSER_BOARD_C104_PCI },
- { PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_CP104, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- MXSER_BOARD_CP104_PCI },
- { PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_CP132, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- MXSER_BOARD_CP132_PCI },
- { PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_CP114, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- MXSER_BOARD_CP114_PCI },
- { PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_CT114, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- MXSER_BOARD_CT114_PCI },
- { 0 }
+ {PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_C168, PCI_ANY_ID, PCI_ANY_ID, 0, 0, MXSER_BOARD_C168_PCI},
+ {PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_C104, PCI_ANY_ID, PCI_ANY_ID, 0, 0, MXSER_BOARD_C104_PCI},
+ {PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_CP132, PCI_ANY_ID, PCI_ANY_ID, 0, 0, MXSER_BOARD_CP132},
+ {PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_CP114, PCI_ANY_ID, PCI_ANY_ID, 0, 0, MXSER_BOARD_CP114},
+ {PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_CT114, PCI_ANY_ID, PCI_ANY_ID, 0, 0, MXSER_BOARD_CT114},
+ {PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_CP102, PCI_ANY_ID, PCI_ANY_ID, 0, 0, MXSER_BOARD_CP102},
+ {PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_CP104U, PCI_ANY_ID, PCI_ANY_ID, 0, 0, MXSER_BOARD_CP104U},
+ {PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_CP168U, PCI_ANY_ID, PCI_ANY_ID, 0, 0, MXSER_BOARD_CP168U},
+ {PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_CP132U, PCI_ANY_ID, PCI_ANY_ID, 0, 0, MXSER_BOARD_CP132U},
+ {PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_CP134U, PCI_ANY_ID, PCI_ANY_ID, 0, 0, MXSER_BOARD_CP134U},
+ {PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_CP104JU, PCI_ANY_ID, PCI_ANY_ID, 0, 0, MXSER_BOARD_CP104JU},
+ {PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_RC7000, PCI_ANY_ID, PCI_ANY_ID, 0, 0, MXSER_BOARD_RC7000},
+ {PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_CP118U, PCI_ANY_ID, PCI_ANY_ID, 0, 0, MXSER_BOARD_CP118U},
+ {PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_CP102UL, PCI_ANY_ID, PCI_ANY_ID, 0, 0, MXSER_BOARD_CP102UL},
+ {PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_CP102U, PCI_ANY_ID, PCI_ANY_ID, 0, 0, MXSER_BOARD_CP102U},
+ {0}
};
+
MODULE_DEVICE_TABLE(pci, mxser_pcibrds);
-#endif /* CONFIG_PCI */
-static int ioaddr[MXSER_BOARDS];
+
+#endif
+
+typedef struct _moxa_pci_info {
+ unsigned short busNum;
+ unsigned short devNum;
+ struct pci_dev *pdev; // add by Victor Yu. 06-23-2003
+} moxa_pci_info;
+
+static int ioaddr[MXSER_BOARDS] = { 0, 0, 0, 0 };
static int ttymajor = MXSERMAJOR;
-static int verbose;
+static int calloutmajor = MXSERCUMAJOR;
+static int verbose = 0;
/* Variables for insmod */
-MODULE_AUTHOR("William Chen");
-MODULE_DESCRIPTION("MOXA Smartio Family Multiport Board Device Driver");
-MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Casper Yang");
+MODULE_DESCRIPTION("MOXA Smartio/Industio Family Multiport Board Device Driver");
MODULE_PARM(ioaddr, "1-4i");
MODULE_PARM(ttymajor, "i");
+MODULE_PARM(calloutmajor, "i");
MODULE_PARM(verbose, "i");
+MODULE_LICENSE("GPL");
+
+struct mxser_log {
+ int tick;
+ unsigned long rxcnt[MXSER_PORTS];
+ unsigned long txcnt[MXSER_PORTS];
+};
+
+
+struct mxser_mon {
+ unsigned long rxcnt;
+ unsigned long txcnt;
+ unsigned long up_rxcnt;
+ unsigned long up_txcnt;
+ int modem_status;
+ unsigned char hold_reason;
+};
+struct mxser_mon_ext {
+ unsigned long rx_cnt[32];
+ unsigned long tx_cnt[32];
+ unsigned long up_rxcnt[32];
+ unsigned long up_txcnt[32];
+ int modem_status[32];
+
+ long baudrate[32];
+ int databits[32];
+ int stopbits[32];
+ int parity[32];
+ int flowctrl[32];
+ int fifo[32];
+ int iftype[32];
+};
struct mxser_hwconf {
int board_type;
int ports;
int uart_type;
int ioaddr[MXSER_PORTS_PER_BOARD];
int baud_base[MXSER_PORTS_PER_BOARD];
- struct pci_dev *pdev;
+ moxa_pci_info pciInfo;
+ int IsMoxaMustChipFlag; // add by Victor Yu. 08-30-2002
+ int MaxCanSetBaudRate[MXSER_PORTS_PER_BOARD]; // add by Victor Yu. 09-04-2002
+ int opmode_ioaddr[MXSER_PORTS_PER_BOARD]; // add by Victor Yu. 01-05-2004
};
struct mxser_struct {
int irq; /* port using irq no. */
int vector; /* port irq vector */
int vectormask; /* port vector mask */
+ int rx_high_water;
int rx_trigger; /* Rx fifo trigger level */
+ int rx_low_water;
int baud_base; /* max. speed */
int flags; /* defined in tty.h */
int type; /* UART type */
unsigned long event;
int count; /* # of fd on device */
int blocked_open; /* # of blocked opens */
+ long session; /* Session of opening process */
+ long pgrp; /* pgrp of opening process */
unsigned char *xmit_buf;
int xmit_head;
int xmit_tail;
int xmit_cnt;
struct work_struct tqueue;
- int cflag;
+ struct termios normal_termios;
+ struct termios callout_termios;
wait_queue_head_t open_wait;
wait_queue_head_t close_wait;
wait_queue_head_t delta_msr_wait;
struct async_icount icount; /* kernel counters for the 4 input interrupts */
+ int timeout;
+ int IsMoxaMustChipFlag; // add by Victor Yu. 08-30-2002
+ int MaxCanSetBaudRate; // add by Victor Yu. 09-04-2002
+ int opmode_ioaddr; // add by Victor Yu. 01-05-2004
+ unsigned char stop_rx;
+ unsigned char ldisc_stop_rx;
+ long realbaud;
+ struct mxser_mon mon_data;
+ unsigned char err_shadow;
+ spinlock_t slock;
};
-struct mxser_log {
- int tick;
- int rxcnt[MXSER_PORTS];
- int txcnt[MXSER_PORTS];
-};
struct mxser_mstatus {
tcflag_t cflag;
static struct mxser_mstatus GMStatus[MXSER_PORTS];
-static int mxserBoardCAP[MXSER_BOARDS] =
-{
+static int mxserBoardCAP[MXSER_BOARDS] = {
0, 0, 0, 0
- /* 0x180, 0x280, 0x200, 0x320 */
+ /* 0x180, 0x280, 0x200, 0x320 */
};
-
static struct tty_driver *mxvar_sdriver;
static struct mxser_struct mxvar_table[MXSER_PORTS];
+static struct tty_struct *mxvar_tty[MXSER_PORTS + 1];
+static struct termios *mxvar_termios[MXSER_PORTS + 1];
+static struct termios *mxvar_termios_locked[MXSER_PORTS + 1];
static struct mxser_log mxvar_log;
static int mxvar_diagflag;
-/*
- * mxvar_tmp_buf is used as a temporary buffer by serial_write. We need
- * to lock it in case the memcpy_fromfs blocks while swapping in a page,
- * and some other program tries to do a serial write at the same time.
- * Since the lock will only come under contention when the system is
- * swapping and available memory is low, it makes sense to share one
- * buffer across all the serial ports, since it significantly saves
- * memory if large numbers of serial ports are open.
- */
-static unsigned char *mxvar_tmp_buf;
-static struct semaphore mxvar_tmp_buf_sem;
+static unsigned char mxser_msr[MXSER_PORTS + 1];
+static struct mxser_mon_ext mon_data_ext;
+static int mxser_set_baud_method[MXSER_PORTS + 1];
+static spinlock_t gm_lock;
/*
* This is used to figure out the divisor speeds and the timeouts
*/
-static int mxvar_baud_table[] =
-{
- 0, 50, 75, 110, 134, 150, 200, 300, 600, 1200, 1800, 2400, 4800,
- 9600, 19200, 38400, 57600, 115200, 230400, 460800, 921600, 0};
-struct mxser_hwconf mxsercfg[MXSER_BOARDS];
+static struct mxser_hwconf mxsercfg[MXSER_BOARDS];
/*
* static functions:
*/
static void mxser_getcfg(int board, struct mxser_hwconf *hwconf);
+static int mxser_init(void);
+
+//static void mxser_poll(unsigned long);
static int mxser_get_ISA_conf(int, struct mxser_hwconf *);
+static int mxser_get_PCI_conf(int, int, int, struct mxser_hwconf *);
static void mxser_do_softint(void *);
static int mxser_open(struct tty_struct *, struct file *);
static void mxser_close(struct tty_struct *, struct file *);
-static int mxser_write(struct tty_struct *, int, const unsigned char *, int);
+static int mxser_write(struct tty_struct *, const unsigned char *, int);
static int mxser_write_room(struct tty_struct *);
static void mxser_flush_buffer(struct tty_struct *);
static int mxser_chars_in_buffer(struct tty_struct *);
static void mxser_flush_chars(struct tty_struct *);
static void mxser_put_char(struct tty_struct *, unsigned char);
static int mxser_ioctl(struct tty_struct *, struct file *, uint, ulong);
-static int mxser_ioctl_special(unsigned int, unsigned long);
+static int mxser_ioctl_special(unsigned int, void __user *);
static void mxser_throttle(struct tty_struct *);
static void mxser_unthrottle(struct tty_struct *);
static void mxser_set_termios(struct tty_struct *, struct termios *);
static void mxser_stop(struct tty_struct *);
static void mxser_start(struct tty_struct *);
static void mxser_hangup(struct tty_struct *);
-static inline void mxser_receive_chars(struct mxser_struct *, int *);
-static inline void mxser_transmit_chars(struct mxser_struct *);
-static inline void mxser_check_modem_status(struct mxser_struct *, int);
+static void mxser_rs_break(struct tty_struct *, int);
static irqreturn_t mxser_interrupt(int, void *, struct pt_regs *);
+static void mxser_receive_chars(struct mxser_struct *, int *);
+static void mxser_transmit_chars(struct mxser_struct *);
+static void mxser_check_modem_status(struct mxser_struct *, int);
static int mxser_block_til_ready(struct tty_struct *, struct file *, struct mxser_struct *);
static int mxser_startup(struct mxser_struct *);
static void mxser_shutdown(struct mxser_struct *);
static void mxser_send_break(struct mxser_struct *, int);
static int mxser_tiocmget(struct tty_struct *, struct file *);
static int mxser_tiocmset(struct tty_struct *, struct file *, unsigned int, unsigned int);
+static int mxser_set_baud(struct mxser_struct *info, long newspd);
+static void mxser_wait_until_sent(struct tty_struct *tty, int timeout);
+
+static void mxser_startrx(struct tty_struct *tty);
+static void mxser_stoprx(struct tty_struct *tty);
+
+
+static int CheckIsMoxaMust(int io)
+{
+ u8 oldmcr, hwid;
+ int i;
+
+ outb(0, io + UART_LCR);
+ DISABLE_MOXA_MUST_ENCHANCE_MODE(io);
+ oldmcr = inb(io + UART_MCR);
+ outb(0, io + UART_MCR);
+ SET_MOXA_MUST_XON1_VALUE(io, 0x11);
+ if ((hwid = inb(io + UART_MCR)) != 0) {
+ outb(oldmcr, io + UART_MCR);
+ return (MOXA_OTHER_UART);
+ }
+
+ GET_MOXA_MUST_HARDWARE_ID(io, &hwid);
+ for (i = 0; i < UART_TYPE_NUM; i++) {
+ if (hwid == Gmoxa_uart_id[i])
+ return (int) hwid;
+ }
+ return MOXA_OTHER_UART;
+}
+
+// above is modified by Victor Yu. 08-15-2002
+
+static struct tty_operations mxser_ops = {
+ .open = mxser_open,
+ .close = mxser_close,
+ .write = mxser_write,
+ .put_char = mxser_put_char,
+ .flush_chars = mxser_flush_chars,
+ .write_room = mxser_write_room,
+ .chars_in_buffer = mxser_chars_in_buffer,
+ .flush_buffer = mxser_flush_buffer,
+ .ioctl = mxser_ioctl,
+ .throttle = mxser_throttle,
+ .unthrottle = mxser_unthrottle,
+ .set_termios = mxser_set_termios,
+ .stop = mxser_stop,
+ .start = mxser_start,
+ .hangup = mxser_hangup,
+ .tiocmget = mxser_tiocmget,
+ .tiocmset = mxser_tiocmset,
+};
/*
- * The MOXA C168/C104 serial driver boot-time initialization code!
+ * The MOXA Smartio/Industio serial driver boot-time initialization code!
*/
+static int __init mxser_module_init(void)
+{
+ int ret;
+
+ if (verbose)
+ printk(KERN_DEBUG "Loading module mxser ...\n");
+ ret = mxser_init();
+ if (verbose)
+ printk(KERN_DEBUG "Done.\n");
+ return ret;
+}
+
static void __exit mxser_module_exit(void)
{
int i, err = 0;
-
if (verbose)
- printk("Unloading module mxser ...\n");
+ printk(KERN_DEBUG "Unloading module mxser ...\n");
+
if ((err |= tty_unregister_driver(mxvar_sdriver)))
- printk("Couldn't unregister MOXA Smartio family serial driver\n");
- put_tty_driver(mxvar_sdriver);
+ printk(KERN_ERR "Couldn't unregister MOXA Smartio/Industio family serial driver\n");
for (i = 0; i < MXSER_BOARDS; i++) {
+ struct pci_dev *pdev;
+
if (mxsercfg[i].board_type == -1)
continue;
else {
+ pdev = mxsercfg[i].pciInfo.pdev;
free_irq(mxsercfg[i].irq, &mxvar_table[i * MXSER_PORTS_PER_BOARD]);
+ if (pdev != NULL) { //PCI
+ release_region(pci_resource_start(pdev, 2), pci_resource_len(pdev, 2));
+ release_region(pci_resource_start(pdev, 3), pci_resource_len(pdev, 3));
+ } else {
+ release_region(mxsercfg[i].ioaddr[0], 8 * mxsercfg[i].ports);
+ release_region(mxsercfg[i].vector, 1);
+ }
}
}
-
if (verbose)
- printk("Done.\n");
+ printk(KERN_DEBUG "Done.\n");
}
-int mxser_initbrd(int board, struct mxser_hwconf *hwconf)
+static void process_txrx_fifo(struct mxser_struct *info)
+{
+ int i;
+
+ if ((info->type == PORT_16450) || (info->type == PORT_8250)) {
+ info->rx_trigger = 1;
+ info->rx_high_water = 1;
+ info->rx_low_water = 1;
+ info->xmit_fifo_size = 1;
+ } else {
+ for (i = 0; i < UART_INFO_NUM; i++) {
+ if (info->IsMoxaMustChipFlag == Gpci_uart_info[i].type) {
+ info->rx_trigger = Gpci_uart_info[i].rx_trigger;
+ info->rx_low_water = Gpci_uart_info[i].rx_low_water;
+ info->rx_high_water = Gpci_uart_info[i].rx_high_water;
+ info->xmit_fifo_size = Gpci_uart_info[i].xmit_fifo_size;
+ break;
+ }
+ }
+ }
+}
+
+static int mxser_initbrd(int board, struct mxser_hwconf *hwconf)
{
struct mxser_struct *info;
unsigned long flags;
int retval;
int i, n;
- init_MUTEX(&mxvar_tmp_buf_sem);
-
n = board * MXSER_PORTS_PER_BOARD;
info = &mxvar_table[n];
+ /*if (verbose) */ {
+ printk(KERN_DEBUG " ttyM%d - ttyM%d ", n, n + hwconf->ports - 1);
+ printk(" max. baud rate = %d bps.\n", hwconf->MaxCanSetBaudRate[0]);
+ }
+
for (i = 0; i < hwconf->ports; i++, n++, info++) {
- if (verbose) {
- printk(" ttyM%d/cum%d at 0x%04x ", n, n, hwconf->ioaddr[i]);
- if (hwconf->baud_base[i] == 115200)
- printk(" max. baud rate up to 115200 bps.\n");
- else
- printk(" max. baud rate up to 921600 bps.\n");
- }
info->port = n;
info->base = hwconf->ioaddr[i];
info->irq = hwconf->irq;
info->vector = hwconf->vector;
info->vectormask = hwconf->vector_mask;
- info->rx_trigger = 14;
- info->baud_base = hwconf->baud_base[i];
+ info->opmode_ioaddr = hwconf->opmode_ioaddr[i]; // add by Victor Yu. 01-05-2004
+ info->stop_rx = 0;
+ info->ldisc_stop_rx = 0;
+
+ info->IsMoxaMustChipFlag = hwconf->IsMoxaMustChipFlag;
+ //Enhance mode enabled here
+ if (info->IsMoxaMustChipFlag != MOXA_OTHER_UART) {
+ ENABLE_MOXA_MUST_ENCHANCE_MODE(info->base);
+ }
+
info->flags = ASYNC_SHARE_IRQ;
info->type = hwconf->uart_type;
- if ((info->type == PORT_16450) || (info->type == PORT_8250))
- info->xmit_fifo_size = 1;
- else
- info->xmit_fifo_size = 16;
+ info->baud_base = hwconf->baud_base[i];
+
+ info->MaxCanSetBaudRate = hwconf->MaxCanSetBaudRate[i];
+
+ process_txrx_fifo(info);
+
+
info->custom_divisor = hwconf->baud_base[i] * 16;
info->close_delay = 5 * HZ / 10;
info->closing_wait = 30 * HZ;
INIT_WORK(&info->tqueue, mxser_do_softint, info);
- info->cflag = B9600 | CS8 | CREAD | HUPCL | CLOCAL;
+ info->normal_termios = mxvar_sdriver->init_termios;
init_waitqueue_head(&info->open_wait);
init_waitqueue_head(&info->close_wait);
init_waitqueue_head(&info->delta_msr_wait);
+ memset(&info->mon_data, 0, sizeof(struct mxser_mon));
+ info->err_shadow = 0;
+ spin_lock_init(&info->slock);
}
-
/*
* Allocate the IRQ if necessary
*/
- save_flags(flags);
+
+
+ /* before set INT ISR, disable all int */
+ for (i = 0; i < hwconf->ports; i++) {
+ outb(inb(hwconf->ioaddr[i] + UART_IER) & 0xf0, hwconf->ioaddr[i] + UART_IER);
+ }
n = board * MXSER_PORTS_PER_BOARD;
info = &mxvar_table[n];
- cli();
- retval = request_irq(hwconf->irq, mxser_interrupt, IRQ_T(info),
- "mxser", info);
+ retval = request_irq(hwconf->irq, mxser_interrupt, IRQ_T(info), "mxser", info);
if (retval) {
- restore_flags(flags);
- printk("Board %d: %s", board, mxser_brdname[hwconf->board_type]);
+ printk(KERN_ERR "Board %d: %s", board, mxser_brdname[hwconf->board_type - 1]);
printk(" Request irq fail,IRQ (%d) may be conflit with another device.\n", info->irq);
- return (retval);
+ return retval;
}
- restore_flags(flags);
-
return 0;
}
}
#ifdef CONFIG_PCI
-static int mxser_get_PCI_conf(struct pci_dev *pdev, int board_type, struct mxser_hwconf *hwconf)
+static int mxser_get_PCI_conf(int busnum, int devnum, int board_type, struct mxser_hwconf *hwconf)
{
- int i;
+ int i, j;
+// unsigned int val;
unsigned int ioaddress;
+ struct pci_dev *pdev = hwconf->pciInfo.pdev;
+ //io address
hwconf->board_type = board_type;
- hwconf->ports = mxser_numports[board_type];
- ioaddress = pci_resource_start (pdev, 2);
- for (i = 0; i < hwconf->ports; i++)
+ hwconf->ports = mxser_numports[board_type - 1];
+ ioaddress = pci_resource_start(pdev, 2);
+ request_region(pci_resource_start(pdev, 2), pci_resource_len(pdev, 2), "mxser(IO)");
+
+ for (i = 0; i < hwconf->ports; i++) {
hwconf->ioaddr[i] = ioaddress + 8 * i;
+ }
- ioaddress = pci_resource_start (pdev, 3);
+ //vector
+ ioaddress = pci_resource_start(pdev, 3);
+ request_region(pci_resource_start(pdev, 3), pci_resource_len(pdev, 3), "mxser(vector)");
hwconf->vector = ioaddress;
- hwconf->irq = pdev->irq;
+ //irq
+ hwconf->irq = hwconf->pciInfo.pdev->irq;
+ hwconf->IsMoxaMustChipFlag = CheckIsMoxaMust(hwconf->ioaddr[0]);
hwconf->uart_type = PORT_16550A;
hwconf->vector_mask = 0;
+
+
+ for (i = 0; i < hwconf->ports; i++) {
+ for (j = 0; j < UART_INFO_NUM; j++) {
+ if (Gpci_uart_info[j].type == hwconf->IsMoxaMustChipFlag) {
+ hwconf->MaxCanSetBaudRate[i] = Gpci_uart_info[j].max_baud;
+
+ //exception....CP-102
+ if (board_type == MXSER_BOARD_CP102)
+ hwconf->MaxCanSetBaudRate[i] = 921600;
+ break;
+ }
+ }
+ }
+
+ if (hwconf->IsMoxaMustChipFlag == MOXA_MUST_MU860_HWID) {
+ for (i = 0; i < hwconf->ports; i++) {
+ if (i < 4)
+ hwconf->opmode_ioaddr[i] = ioaddress + 4;
+ else
+ hwconf->opmode_ioaddr[i] = ioaddress + 0x0c;
+ }
+ outb(0, ioaddress + 4); // default set to RS232 mode
+ outb(0, ioaddress + 0x0c); //default set to RS232 mode
+ }
+
for (i = 0; i < hwconf->ports; i++) {
hwconf->vector_mask |= (1 << i);
hwconf->baud_base[i] = 921600;
}
return (0);
}
-#endif /* CONFIG_PCI */
-
-static struct tty_operations mxser_ops = {
- .open = mxser_open,
- .close = mxser_close,
- .write = mxser_write,
- .put_char = mxser_put_char,
- .flush_chars = mxser_flush_chars,
- .write_room = mxser_write_room,
- .chars_in_buffer = mxser_chars_in_buffer,
- .flush_buffer = mxser_flush_buffer,
- .ioctl = mxser_ioctl,
- .throttle = mxser_throttle,
- .unthrottle = mxser_unthrottle,
- .set_termios = mxser_set_termios,
- .stop = mxser_stop,
- .start = mxser_start,
- .hangup = mxser_hangup,
- .tiocmget = mxser_tiocmget,
- .tiocmset = mxser_tiocmset,
-};
+#endif
-static int __init mxser_module_init(void)
+static int mxser_init(void)
{
- int i, m, retval, b;
+ int i, m, retval, b, n;
+ int ret1;
+ struct pci_dev *pdev = NULL;
+ int index;
+ unsigned char busnum, devnum;
struct mxser_hwconf hwconf;
mxvar_sdriver = alloc_tty_driver(MXSER_PORTS + 1);
if (!mxvar_sdriver)
return -ENOMEM;
+ spin_lock_init(&gm_lock);
+
+ for (i = 0; i < MXSER_BOARDS; i++) {
+ mxsercfg[i].board_type = -1;
+ }
- printk("MOXA Smartio family driver version %s\n", MXSER_VERSION);
+ printk(KERN_INFO "MOXA Smartio/Industio family driver version %s\n", MXSER_VERSION);
/* Initialize the tty_driver structure */
-
- mxvar_sdriver->owner = THIS_MODULE;
+ memset(mxvar_sdriver, 0, sizeof(struct tty_driver));
+ mxvar_sdriver->magic = TTY_DRIVER_MAGIC;
mxvar_sdriver->name = "ttyM";
- mxvar_sdriver->devfs_name = "tts/M";
mxvar_sdriver->major = ttymajor;
mxvar_sdriver->minor_start = 0;
+ mxvar_sdriver->num = MXSER_PORTS + 1;
mxvar_sdriver->type = TTY_DRIVER_TYPE_SERIAL;
mxvar_sdriver->subtype = SERIAL_TYPE_NORMAL;
mxvar_sdriver->init_termios = tty_std_termios;
mxvar_sdriver->init_termios.c_cflag = B9600 | CS8 | CREAD | HUPCL | CLOCAL;
mxvar_sdriver->flags = TTY_DRIVER_REAL_RAW;
tty_set_operations(mxvar_sdriver, &mxser_ops);
- printk("Tty devices major number = %d\n", ttymajor);
+ mxvar_sdriver->ttys = mxvar_tty;
+ mxvar_sdriver->termios = mxvar_termios;
+ mxvar_sdriver->termios_locked = mxvar_termios_locked;
+
+ mxvar_sdriver->open = mxser_open;
+ mxvar_sdriver->close = mxser_close;
+ mxvar_sdriver->write = mxser_write;
+ mxvar_sdriver->put_char = mxser_put_char;
+ mxvar_sdriver->flush_chars = mxser_flush_chars;
+ mxvar_sdriver->write_room = mxser_write_room;
+ mxvar_sdriver->chars_in_buffer = mxser_chars_in_buffer;
+ mxvar_sdriver->flush_buffer = mxser_flush_buffer;
+ mxvar_sdriver->ioctl = mxser_ioctl;
+ mxvar_sdriver->throttle = mxser_throttle;
+ mxvar_sdriver->unthrottle = mxser_unthrottle;
+ mxvar_sdriver->set_termios = mxser_set_termios;
+ mxvar_sdriver->stop = mxser_stop;
+ mxvar_sdriver->start = mxser_start;
+ mxvar_sdriver->hangup = mxser_hangup;
+ mxvar_sdriver->break_ctl = mxser_rs_break;
+ mxvar_sdriver->wait_until_sent = mxser_wait_until_sent;
mxvar_diagflag = 0;
memset(mxvar_table, 0, MXSER_PORTS * sizeof(struct mxser_struct));
memset(&mxvar_log, 0, sizeof(struct mxser_log));
+ memset(&mxser_msr, 0, sizeof(unsigned char) * (MXSER_PORTS + 1));
+ memset(&mon_data_ext, 0, sizeof(struct mxser_mon_ext));
+ memset(&mxser_set_baud_method, 0, sizeof(int) * (MXSER_PORTS + 1));
+ memset(&hwconf, 0, sizeof(struct mxser_hwconf));
m = 0;
/* Start finding ISA boards here */
retval = mxser_get_ISA_conf(cap, &hwconf);
if (retval != 0)
- printk("Found MOXA %s board (CAP=0x%x)\n",
- mxser_brdname[hwconf.board_type],
- ioaddr[b]);
+ printk(KERN_INFO "Found MOXA %s board (CAP=0x%x)\n", mxser_brdname[hwconf.board_type - 1], ioaddr[b]);
if (retval <= 0) {
if (retval == MXSER_ERR_IRQ)
- printk("Invalid interrupt number,board not configured\n");
+ printk(KERN_ERR "Invalid interrupt number,board not configured\n");
else if (retval == MXSER_ERR_IRQ_CONFLIT)
- printk("Invalid interrupt number,board not configured\n");
+ printk(KERN_ERR "Invalid interrupt number,board not configured\n");
else if (retval == MXSER_ERR_VECTOR)
- printk("Invalid interrupt vector,board not configured\n");
+ printk(KERN_ERR "Invalid interrupt vector,board not configured\n");
else if (retval == MXSER_ERR_IOADDR)
- printk("Invalid I/O address,board not configured\n");
+ printk(KERN_ERR "Invalid I/O address,board not configured\n");
continue;
}
- hwconf.pdev = NULL;
+ hwconf.pciInfo.busNum = 0;
+ hwconf.pciInfo.devNum = 0;
+ hwconf.pciInfo.pdev = NULL;
+
+ mxser_getcfg(m, &hwconf);
+ //init mxsercfg first, or mxsercfg data is not correct on ISR.
+ //mxser_initbrd will hook ISR.
if (mxser_initbrd(m, &hwconf) < 0)
continue;
- mxser_getcfg(m, &hwconf);
m++;
}
retval = mxser_get_ISA_conf(cap, &hwconf);
if (retval != 0)
- printk("Found MOXA %s board (CAP=0x%x)\n",
- mxser_brdname[hwconf.board_type],
- ioaddr[b]);
+ printk(KERN_INFO "Found MOXA %s board (CAP=0x%x)\n", mxser_brdname[hwconf.board_type - 1], ioaddr[b]);
if (retval <= 0) {
if (retval == MXSER_ERR_IRQ)
- printk("Invalid interrupt number,board not configured\n");
+ printk(KERN_ERR "Invalid interrupt number,board not configured\n");
else if (retval == MXSER_ERR_IRQ_CONFLIT)
- printk("Invalid interrupt number,board not configured\n");
+ printk(KERN_ERR "Invalid interrupt number,board not configured\n");
else if (retval == MXSER_ERR_VECTOR)
- printk("Invalid interrupt vector,board not configured\n");
+ printk(KERN_ERR "Invalid interrupt vector,board not configured\n");
else if (retval == MXSER_ERR_IOADDR)
- printk("Invalid I/O address,board not configured\n");
+ printk(KERN_ERR "Invalid I/O address,board not configured\n");
continue;
}
- hwconf.pdev = NULL;
- if (mxser_initbrd(m, &hwconf) < 0)
- continue;
+ hwconf.pciInfo.busNum = 0;
+ hwconf.pciInfo.devNum = 0;
+ hwconf.pciInfo.pdev = NULL;
mxser_getcfg(m, &hwconf);
+ //init mxsercfg first, or mxsercfg data is not correct on ISR.
+ //mxser_initbrd will hook ISR.
+ if (mxser_initbrd(m, &hwconf) < 0)
+ continue;
m++;
}
/* start finding PCI board here */
-
#ifdef CONFIG_PCI
- {
- struct pci_dev *pdev = NULL;
- int n = (sizeof(mxser_pcibrds) / sizeof(mxser_pcibrds[0])) - 1;
- for (b = 0; b < n; b++) {
- while ((pdev = pci_find_device(mxser_pcibrds[b].vendor, mxser_pcibrds[b].device, pdev)))
- {
- if (pci_enable_device(pdev))
- continue;
- hwconf.pdev = pdev;
- printk("Found MOXA %s board(BusNo=%d,DevNo=%d)\n",
- mxser_brdname[mxser_pcibrds[b].driver_data],
- pdev->bus->number, PCI_SLOT(pdev->devfn));
- if (m >= MXSER_BOARDS) {
- printk("Too many Smartio family boards found (maximum %d),board not configured\n", MXSER_BOARDS);
- } else {
- retval = mxser_get_PCI_conf(pdev, mxser_pcibrds[b].driver_data, &hwconf);
- if (retval < 0) {
- if (retval == MXSER_ERR_IRQ)
- printk("Invalid interrupt number,board not configured\n");
- else if (retval == MXSER_ERR_IRQ_CONFLIT)
- printk("Invalid interrupt number,board not configured\n");
- else if (retval == MXSER_ERR_VECTOR)
- printk("Invalid interrupt vector,board not configured\n");
- else if (retval == MXSER_ERR_IOADDR)
- printk("Invalid I/O address,board not configured\n");
- continue;
- }
- if (mxser_initbrd(m, &hwconf) < 0)
- continue;
- mxser_getcfg(m, &hwconf);
- m++;
- }
+ n = (sizeof(mxser_pcibrds) / sizeof(mxser_pcibrds[0])) - 1;
+ index = 0;
+ b = 0;
+ while (b < n) {
+ pdev = pci_find_device(mxser_pcibrds[b].vendor, mxser_pcibrds[b].device, pdev);
+ if (pdev == NULL) {
+ b++;
+ continue;
+ }
+ hwconf.pciInfo.busNum = busnum = pdev->bus->number;
+ hwconf.pciInfo.devNum = devnum = PCI_SLOT(pdev->devfn) << 3;
+ hwconf.pciInfo.pdev = pdev;
+ printk(KERN_INFO "Found MOXA %s board(BusNo=%d,DevNo=%d)\n", mxser_brdname[(int) (mxser_pcibrds[b].driver_data) - 1], busnum, devnum >> 3);
+ index++;
+ if (m >= MXSER_BOARDS) {
+ printk(KERN_ERR "Too many Smartio/Industio family boards find (maximum %d),board not configured\n", MXSER_BOARDS);
+ } else {
+ if (pci_enable_device(pdev)) {
+ printk(KERN_ERR "Moxa SmartI/O PCI enable fail !\n");
+ continue;
}
+ retval = mxser_get_PCI_conf(busnum, devnum, (int) mxser_pcibrds[b].driver_data, &hwconf);
+ if (retval < 0) {
+ if (retval == MXSER_ERR_IRQ)
+ printk(KERN_ERR "Invalid interrupt number,board not configured\n");
+ else if (retval == MXSER_ERR_IRQ_CONFLIT)
+ printk(KERN_ERR "Invalid interrupt number,board not configured\n");
+ else if (retval == MXSER_ERR_VECTOR)
+ printk(KERN_ERR "Invalid interrupt vector,board not configured\n");
+ else if (retval == MXSER_ERR_IOADDR)
+ printk(KERN_ERR "Invalid I/O address,board not configured\n");
+ continue;
+ }
+ mxser_getcfg(m, &hwconf);
+ //init mxsercfg first, or mxsercfg data is not correct on ISR.
+ //mxser_initbrd will hook ISR.
+ if (mxser_initbrd(m, &hwconf) < 0)
+ continue;
+ m++;
}
}
#endif
- for (i = m; i < MXSER_BOARDS; i++) {
- mxsercfg[i].board_type = -1;
- }
-
-
- if (!tty_register_driver(mxvar_sdriver))
+ ret1 = 0;
+ if (!(ret1 = tty_register_driver(mxvar_sdriver))) {
return 0;
+ } else
+ printk(KERN_ERR "Couldn't install MOXA Smartio/Industio family driver !\n");
- put_tty_driver(mxvar_sdriver);
- printk("Couldn't install MOXA Smartio family driver !\n");
- for (i = 0; i < MXSER_BOARDS; i++) {
- if (mxsercfg[i].board_type == -1)
- continue;
- free_irq(mxsercfg[i].irq, &mxvar_table[i * MXSER_PORTS_PER_BOARD]);
+ if (ret1) {
+ for (i = 0; i < MXSER_BOARDS; i++) {
+ if (mxsercfg[i].board_type == -1)
+ continue;
+ else {
+ free_irq(mxsercfg[i].irq, &mxvar_table[i * MXSER_PORTS_PER_BOARD]);
+ //todo: release io, vector
+ }
+ }
+ return -1;
}
- return -1;
+
+ return (0);
}
static void mxser_do_softint(void *private_)
struct tty_struct *tty;
tty = info->tty;
+
if (tty) {
- if (test_and_clear_bit(MXSER_EVENT_TXLOW, &info->event)) {
+ if (test_and_clear_bit(MXSER_EVENT_TXLOW, &info->event))
tty_wakeup(tty);
- wake_up_interruptible(&tty->write_wait);
- }
- if (test_and_clear_bit(MXSER_EVENT_HANGUP, &info->event)) {
- tty_hangup(tty); /* FIXME: module removal race here - AKPM */
- }
+ if (test_and_clear_bit(MXSER_EVENT_HANGUP, &info->event))
+ tty_hangup(tty);
}
}
+static unsigned char mxser_get_msr(int baseaddr, int mode, int port, struct mxser_struct *info)
+{
+ unsigned char status = 0;
+
+ status = inb(baseaddr + UART_MSR);
+
+ mxser_msr[port] &= 0x0F;
+ mxser_msr[port] |= status;
+ status = mxser_msr[port];
+ if (mode)
+ mxser_msr[port] = 0;
+
+ return status;
+}
+
/*
* This routine is called whenever a serial port is opened. It
* enables interrupts for a serial port, linking in its async structure into
* the IRQ chain. It also performs the serial-specific
* initialization for the tty structure.
*/
-
static int mxser_open(struct tty_struct *tty, struct file *filp)
{
struct mxser_struct *info;
int retval, line;
- unsigned long page;
- line = PORTNO(tty);
+ line = tty->index;
if (line == MXSER_PORTS)
- return (0);
- if ((line < 0) || (line > MXSER_PORTS))
- return (-ENODEV);
+ return 0;
+ if (line < 0 || line > MXSER_PORTS)
+ return -ENODEV;
info = mxvar_table + line;
if (!info->base)
return (-ENODEV);
- info->count++;
tty->driver_data = info;
info->tty = tty;
-
- if (!mxvar_tmp_buf) {
- page = get_zeroed_page(GFP_KERNEL);
- if (!page)
- return (-ENOMEM);
- if (mxvar_tmp_buf)
- free_page(page);
- else
- mxvar_tmp_buf = (unsigned char *) page;
- }
/*
* Start up serial port
*/
if (retval)
return (retval);
- return mxser_block_til_ready(tty, filp, info);
+ retval = mxser_block_til_ready(tty, filp, info);
+ if (retval)
+ return (retval);
+
+ info->count++;
+
+ if ((info->count == 1) && (info->flags & ASYNC_SPLIT_TERMIOS)) {
+ if (tty->driver->subtype == SERIAL_TYPE_NORMAL)
+ *tty->termios = info->normal_termios;
+ else
+ *tty->termios = info->callout_termios;
+ mxser_change_speed(info, NULL);
+ }
+
+ info->session = current->signal->session;
+ info->pgrp = process_group(current);
+ clear_bit(TTY_DONT_FLIP, &tty->flags);
+
+ //status = mxser_get_msr(info->base, 0, info->port);
+ //mxser_check_modem_status(info, status);
+
+/* unmark here for very high baud rate (ex. 921600 bps) used
+*/
+ tty->low_latency = 1;
+ return 0;
}
/*
* async structure from the interrupt chain if necessary, and we free
* that IRQ if nothing is left in the chain.
*/
-
static void mxser_close(struct tty_struct *tty, struct file *filp)
{
struct mxser_struct *info = (struct mxser_struct *) tty->driver_data;
- unsigned long flags;
+
unsigned long timeout;
+ unsigned long flags;
+ struct tty_ldisc *ld;
- if (PORTNO(tty) == MXSER_PORTS)
+ if (tty->index == MXSER_PORTS)
return;
if (!info)
- return;
+ BUG();
- save_flags(flags);
- cli();
+ spin_lock_irqsave(&info->slock, flags);
if (tty_hung_up_p(filp)) {
- restore_flags(flags);
+ spin_unlock_irqrestore(&info->slock, flags);
return;
}
if ((tty->count == 1) && (info->count != 1)) {
/*
- * Uh, oh. tty->count is 1, which means that the tty
+ * Uh, oh. tty->count is 1, which means that the tty
* structure will be freed. Info->count should always
* be one in these conditions. If it's greater than
* one, we've got real problems, since it means the
* serial port won't be shutdown.
*/
- printk("mxser_close: bad serial port count; tty->count is 1, "
- "info->count is %d\n", info->count);
+ printk(KERN_ERR "mxser_close: bad serial port count; tty->count is 1, " "info->count is %d\n", info->count);
info->count = 1;
}
if (--info->count < 0) {
- printk("mxser_close: bad serial port count for ttys%d: %d\n",
- info->port, info->count);
+ printk(KERN_ERR "mxser_close: bad serial port count for ttys%d: %d\n", info->port, info->count);
info->count = 0;
}
if (info->count) {
- restore_flags(flags);
+ spin_unlock_irqrestore(&info->slock, flags);
return;
}
info->flags |= ASYNC_CLOSING;
- info->cflag = tty->termios->c_cflag;
+ spin_unlock_irqrestore(&info->slock, flags);
+ /*
+ * Save the termios structure, since this port may have
+ * separate termios for callout and dialin.
+ */
+ if (info->flags & ASYNC_NORMAL_ACTIVE)
+ info->normal_termios = *tty->termios;
/*
* Now we wait for the transmit buffer to clear; and we notify
* the line discipline to only process XON/XOFF characters.
* line status register.
*/
info->IER &= ~UART_IER_RLSI;
- /* by William
- info->read_status_mask &= ~UART_LSR_DR;
- */
+ if (info->IsMoxaMustChipFlag)
+ info->IER &= ~MOXA_MUST_RECV_ISR;
+/* by William
+ info->read_status_mask &= ~UART_LSR_DR;
+*/
if (info->flags & ASYNC_INITIALIZED) {
outb(info->IER, info->base + UART_IER);
/*
}
}
mxser_shutdown(info);
+
if (tty->driver->flush_buffer)
tty->driver->flush_buffer(tty);
- tty_ldisc_flush(tty);
-
+
+ ld = tty_ldisc_ref(tty);
+ if (ld) {
+ if(ld->flush_buffer)
+ ld->flush_buffer(tty);
+ tty_ldisc_deref(ld);
+ }
+
tty->closing = 0;
info->event = 0;
info->tty = NULL;
}
wake_up_interruptible(&info->open_wait);
}
+
info->flags &= ~(ASYNC_NORMAL_ACTIVE | ASYNC_CLOSING);
wake_up_interruptible(&info->close_wait);
- restore_flags(flags);
}
-static int mxser_write(struct tty_struct *tty, int from_user,
- const unsigned char *buf, int count)
+static int mxser_write(struct tty_struct *tty, const unsigned char *buf, int count)
{
int c, total = 0;
struct mxser_struct *info = (struct mxser_struct *) tty->driver_data;
unsigned long flags;
- if (!tty || !info->xmit_buf || !mxvar_tmp_buf)
+ if (!tty || !info->xmit_buf)
return (0);
- save_flags(flags);
- if (from_user) {
- down(&mxvar_tmp_buf_sem);
- while (1) {
- c = min_t(int, count, min(SERIAL_XMIT_SIZE - info->xmit_cnt - 1,
- SERIAL_XMIT_SIZE - info->xmit_head));
- if (c <= 0)
- break;
-
- c -= copy_from_user(mxvar_tmp_buf, buf, c);
- if (!c) {
- if (!total)
- total = -EFAULT;
- break;
- }
+ while (1) {
+ c = min_t(int, count, min(SERIAL_XMIT_SIZE - info->xmit_cnt - 1, SERIAL_XMIT_SIZE - info->xmit_head));
+ if (c <= 0)
+ break;
- cli();
- c = min_t(int, c, min(SERIAL_XMIT_SIZE - info->xmit_cnt - 1,
- SERIAL_XMIT_SIZE - info->xmit_head));
- memcpy(info->xmit_buf + info->xmit_head, mxvar_tmp_buf, c);
- info->xmit_head = (info->xmit_head + c) & (SERIAL_XMIT_SIZE - 1);
- info->xmit_cnt += c;
- restore_flags(flags);
-
- buf += c;
- count -= c;
- total += c;
- }
- up(&mxvar_tmp_buf_sem);
- } else {
- while (1) {
- cli();
- c = min_t(int, count, min(SERIAL_XMIT_SIZE - info->xmit_cnt - 1,
- SERIAL_XMIT_SIZE - info->xmit_head));
- if (c <= 0) {
- restore_flags(flags);
- break;
- }
+ memcpy(info->xmit_buf + info->xmit_head, buf, c);
+ spin_lock_irqsave(&info->slock, flags);
+ info->xmit_head = (info->xmit_head + c) & (SERIAL_XMIT_SIZE - 1);
+ info->xmit_cnt += c;
+ spin_unlock_irqrestore(&info->slock, flags);
- memcpy(info->xmit_buf + info->xmit_head, buf, c);
- info->xmit_head = (info->xmit_head + c) & (SERIAL_XMIT_SIZE - 1);
- info->xmit_cnt += c;
- restore_flags(flags);
+ buf += c;
+ count -= c;
+ total += c;
- buf += c;
- count -= c;
- total += c;
- }
}
- cli();
- if (info->xmit_cnt && !tty->stopped && !tty->hw_stopped &&
- !(info->IER & UART_IER_THRI)) {
- info->IER |= UART_IER_THRI;
- outb(info->IER, info->base + UART_IER);
+ if (info->xmit_cnt && !tty->stopped && !(info->IER & UART_IER_THRI)) {
+ if (!tty->hw_stopped || (info->type == PORT_16550A) || (info->IsMoxaMustChipFlag)) {
+ spin_lock_irqsave(&info->slock, flags);
+ info->IER |= UART_IER_THRI;
+ outb(info->IER, info->base + UART_IER);
+ spin_unlock_irqrestore(&info->slock, flags);
+ }
}
- restore_flags(flags);
- return (total);
+ return total;
}
static void mxser_put_char(struct tty_struct *tty, unsigned char ch)
if (!tty || !info->xmit_buf)
return;
- save_flags(flags);
- cli();
- if (info->xmit_cnt >= SERIAL_XMIT_SIZE - 1) {
- restore_flags(flags);
+ if (info->xmit_cnt >= SERIAL_XMIT_SIZE - 1)
return;
- }
+
+ spin_lock_irqsave(&info->slock, flags);
info->xmit_buf[info->xmit_head++] = ch;
info->xmit_head &= SERIAL_XMIT_SIZE - 1;
info->xmit_cnt++;
- /********************************************** why ??? ***********
- if ( !tty->stopped && !tty->hw_stopped &&
- !(info->IER & UART_IER_THRI) ) {
- info->IER |= UART_IER_THRI;
- outb(info->IER, info->base + UART_IER);
- }
- *****************************************************************/
- restore_flags(flags);
+ spin_unlock_irqrestore(&info->slock, flags);
+ if (!tty->stopped && !(info->IER & UART_IER_THRI)) {
+ if (!tty->hw_stopped || (info->type == PORT_16550A) || info->IsMoxaMustChipFlag) {
+ spin_lock_irqsave(&info->slock, flags);
+ info->IER |= UART_IER_THRI;
+ outb(info->IER, info->base + UART_IER);
+ spin_unlock_irqrestore(&info->slock, flags);
+ }
+ }
}
+
static void mxser_flush_chars(struct tty_struct *tty)
{
struct mxser_struct *info = (struct mxser_struct *) tty->driver_data;
unsigned long flags;
- if (info->xmit_cnt <= 0 || tty->stopped || tty->hw_stopped ||
- !info->xmit_buf)
+ if (info->xmit_cnt <= 0 || tty->stopped || !info->xmit_buf || (tty->hw_stopped && (info->type != PORT_16550A) && (!info->IsMoxaMustChipFlag)))
return;
- save_flags(flags);
- cli();
+ spin_lock_irqsave(&info->slock, flags);
+
info->IER |= UART_IER_THRI;
outb(info->IER, info->base + UART_IER);
- restore_flags(flags);
+
+ spin_unlock_irqrestore(&info->slock, flags);
}
static int mxser_write_room(struct tty_struct *tty)
static int mxser_chars_in_buffer(struct tty_struct *tty)
{
struct mxser_struct *info = (struct mxser_struct *) tty->driver_data;
-
- return (info->xmit_cnt);
+ return info->xmit_cnt;
}
static void mxser_flush_buffer(struct tty_struct *tty)
{
struct mxser_struct *info = (struct mxser_struct *) tty->driver_data;
+ char fcr;
unsigned long flags;
- save_flags(flags);
- cli();
+
+ spin_lock_irqsave(&info->slock, flags);
info->xmit_cnt = info->xmit_head = info->xmit_tail = 0;
- restore_flags(flags);
+
+ /* below added by shinhay */
+ fcr = inb(info->base + UART_FCR);
+ outb((fcr | UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT), info->base + UART_FCR);
+ outb(fcr, info->base + UART_FCR);
+
+ spin_unlock_irqrestore(&info->slock, flags);
+ /* above added by shinhay */
+
wake_up_interruptible(&tty->write_wait);
- tty_wakeup(tty);
+ if ((tty->flags & (1 << TTY_DO_WRITE_WAKEUP)) && tty->ldisc.write_wakeup)
+ (tty->ldisc.write_wakeup) (tty);
}
-static int mxser_ioctl(struct tty_struct *tty, struct file *file,
- unsigned int cmd, unsigned long arg)
+static int mxser_ioctl(struct tty_struct *tty, struct file *file, unsigned int cmd, unsigned long arg)
{
- unsigned long flags;
struct mxser_struct *info = (struct mxser_struct *) tty->driver_data;
int retval;
struct async_icount cprev, cnow; /* kernel counter temps */
struct serial_icounter_struct __user *p_cuser;
unsigned long templ;
+ unsigned long flags;
void __user *argp = (void __user *)arg;
- if (PORTNO(tty) == MXSER_PORTS)
- return (mxser_ioctl_special(cmd, arg));
- if ((cmd != TIOCGSERIAL) && (cmd != TIOCMIWAIT) &&
- (cmd != TIOCGICOUNT)) {
+ if (tty->index == MXSER_PORTS)
+ return (mxser_ioctl_special(cmd, argp));
+
+ // following add by Victor Yu. 01-05-2004
+ if (cmd == MOXA_SET_OP_MODE || cmd == MOXA_GET_OP_MODE) {
+ int opmode, p;
+ static unsigned char ModeMask[] = { 0xfc, 0xf3, 0xcf, 0x3f };
+ int shiftbit;
+ unsigned char val, mask;
+
+ p = info->port % 4;
+ if (cmd == MOXA_SET_OP_MODE) {
+ if (get_user(opmode, (int __user *) argp))
+ return -EFAULT;
+ if (opmode != RS232_MODE && opmode != RS485_2WIRE_MODE && opmode != RS422_MODE && opmode != RS485_4WIRE_MODE)
+ return -EFAULT;
+ mask = ModeMask[p];
+ shiftbit = p * 2;
+ val = inb(info->opmode_ioaddr);
+ val &= mask;
+ val |= (opmode << shiftbit);
+ outb(val, info->opmode_ioaddr);
+ } else {
+ shiftbit = p * 2;
+ opmode = inb(info->opmode_ioaddr) >> shiftbit;
+ opmode &= OP_MODE_MASK;
+ if (copy_to_user(argp, &opmode, sizeof(int)))
+ return -EFAULT;
+ }
+ return 0;
+ }
+ // above add by Victor Yu. 01-05-2004
+
+ if ((cmd != TIOCGSERIAL) && (cmd != TIOCMIWAIT) && (cmd != TIOCGICOUNT)) {
if (tty->flags & (1 << TTY_IO_ERROR))
return (-EIO);
}
return (retval);
tty_wait_until_sent(tty, 0);
if (!arg)
- mxser_send_break(info, HZ / 4); /* 1/4 second */
+ mxser_send_break(info, HZ / 4); /* 1/4 second */
return (0);
case TCSBRKP: /* support for POSIX tcsendbreak() */
retval = tty_check_change(tty);
mxser_send_break(info, arg ? arg * (HZ / 10) : HZ / 4);
return (0);
case TIOCGSOFTCAR:
- return put_user(C_CLOCAL(tty) ? 1 : 0, (unsigned long __user *)argp);
+ return put_user(C_CLOCAL(tty) ? 1 : 0, (unsigned long __user *) argp);
case TIOCSSOFTCAR:
- if(get_user(templ, (unsigned long __user *) arg))
+ if (get_user(templ, (unsigned long __user *) argp))
return -EFAULT;
arg = templ;
- tty->termios->c_cflag = ((tty->termios->c_cflag & ~CLOCAL) |
- (arg ? CLOCAL : 0));
+ tty->termios->c_cflag = ((tty->termios->c_cflag & ~CLOCAL) | (arg ? CLOCAL : 0));
return (0);
case TIOCGSERIAL:
return mxser_get_serial_info(info, argp);
* (use |'ed TIOCM_RNG/DSR/CD/CTS for masking)
* Caller should use TIOCGICOUNT to see which one it was
*/
- case TIOCMIWAIT:
- save_flags(flags);
- cli();
- cprev = info->icount; /* note the counters on entry */
- restore_flags(flags);
- while (1) {
- interruptible_sleep_on(&info->delta_msr_wait);
- /* see if a signal did it */
- if (signal_pending(current))
- return (-ERESTARTSYS);
- save_flags(flags);
- cli();
- cnow = info->icount; /* atomic copy */
- restore_flags(flags);
- if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr &&
- cnow.dcd == cprev.dcd && cnow.cts == cprev.cts)
- return (-EIO); /* no change => error */
- if (((arg & TIOCM_RNG) && (cnow.rng != cprev.rng)) ||
- ((arg & TIOCM_DSR) && (cnow.dsr != cprev.dsr)) ||
- ((arg & TIOCM_CD) && (cnow.dcd != cprev.dcd)) ||
- ((arg & TIOCM_CTS) && (cnow.cts != cprev.cts))) {
- return (0);
+ case TIOCMIWAIT:{
+ DECLARE_WAITQUEUE(wait, current);
+ int ret;
+ spin_lock_irqsave(&info->slock, flags);
+ cprev = info->icount; /* note the counters on entry */
+ spin_unlock_irqrestore(&info->slock, flags);
+
+ add_wait_queue(&info->delta_msr_wait, &wait);
+ while (1) {
+ spin_lock_irqsave(&info->slock, flags);
+ cnow = info->icount; /* atomic copy */
+ spin_unlock_irqrestore(&info->slock, flags);
+
+ set_current_state(TASK_INTERRUPTIBLE);
+ if (((arg & TIOCM_RNG) && (cnow.rng != cprev.rng)) || ((arg & TIOCM_DSR) && (cnow.dsr != cprev.dsr)) || ((arg & TIOCM_CD) && (cnow.dcd != cprev.dcd)) || ((arg & TIOCM_CTS) && (cnow.cts != cprev.cts))) {
+ ret = 0;
+ break;
+ }
+ /* see if a signal did it */
+ if (signal_pending(current)) {
+ ret = -ERESTARTSYS;
+ break;
+ }
+ cprev = cnow;
}
- cprev = cnow;
+ current->state = TASK_RUNNING;
+ remove_wait_queue(&info->delta_msr_wait, &wait);
+ break;
}
/* NOTREACHED */
/*
* RI where only 0->1 is counted.
*/
case TIOCGICOUNT:
- save_flags(flags);
- cli();
+ spin_lock_irqsave(&info->slock, flags);
cnow = info->icount;
- restore_flags(flags);
+ spin_unlock_irqrestore(&info->slock, flags);
p_cuser = argp;
- if(put_user(cnow.cts, &p_cuser->cts))
+ /* modified by casper 1/11/2000 */
+ if (put_user(cnow.frame, &p_cuser->frame))
+ return -EFAULT;
+ if (put_user(cnow.brk, &p_cuser->brk))
+ return -EFAULT;
+ if (put_user(cnow.overrun, &p_cuser->overrun))
+ return -EFAULT;
+ if (put_user(cnow.buf_overrun, &p_cuser->buf_overrun))
return -EFAULT;
- if(put_user(cnow.dsr, &p_cuser->dsr))
+ if (put_user(cnow.parity, &p_cuser->parity))
return -EFAULT;
- if(put_user(cnow.rng, &p_cuser->rng))
+ if (put_user(cnow.rx, &p_cuser->rx))
return -EFAULT;
- return put_user(cnow.dcd, &p_cuser->dcd);
+ if (put_user(cnow.tx, &p_cuser->tx))
+ return -EFAULT;
+ put_user(cnow.cts, &p_cuser->cts);
+ put_user(cnow.dsr, &p_cuser->dsr);
+ put_user(cnow.rng, &p_cuser->rng);
+ put_user(cnow.dcd, &p_cuser->dcd);
+
+/* */
+ return 0;
case MOXA_HighSpeedOn:
- return put_user(info->baud_base != 115200 ? 1 : 0, (int __user *)argp);
+ return put_user(info->baud_base != 115200 ? 1 : 0, (int __user *) argp);
+
+ case MOXA_SDS_RSTICOUNTER:{
+ info->mon_data.rxcnt = 0;
+ info->mon_data.txcnt = 0;
+ return 0;
+ }
+// (above) added by James.
+ case MOXA_ASPP_SETBAUD:{
+ long baud;
+ if (get_user(baud, (long __user *) argp))
+ return -EFAULT;
+ mxser_set_baud(info, baud);
+ return 0;
+ }
+ case MOXA_ASPP_GETBAUD:
+ if (copy_to_user(argp, &info->realbaud, sizeof(long)))
+ return -EFAULT;
+
+ return 0;
+
+ case MOXA_ASPP_OQUEUE:{
+ int len, lsr;
+
+ len = mxser_chars_in_buffer(tty);
+
+ lsr = inb(info->base + UART_LSR) & UART_LSR_TEMT;
+
+ len += (lsr ? 0 : 1);
+
+ if (copy_to_user(argp, &len, sizeof(int)))
+ return -EFAULT;
+
+ return 0;
+ }
+ case MOXA_ASPP_MON:{
+ int mcr, status;
+// info->mon_data.ser_param = tty->termios->c_cflag;
+
+ status = mxser_get_msr(info->base, 1, info->port, info);
+ mxser_check_modem_status(info, status);
+
+ mcr = inb(info->base + UART_MCR);
+ if (mcr & MOXA_MUST_MCR_XON_FLAG)
+ info->mon_data.hold_reason &= ~NPPI_NOTIFY_XOFFHOLD;
+ else
+ info->mon_data.hold_reason |= NPPI_NOTIFY_XOFFHOLD;
+
+ if (mcr & MOXA_MUST_MCR_TX_XON)
+ info->mon_data.hold_reason &= ~NPPI_NOTIFY_XOFFXENT;
+ else
+ info->mon_data.hold_reason |= NPPI_NOTIFY_XOFFXENT;
+
+ if (info->tty->hw_stopped)
+ info->mon_data.hold_reason |= NPPI_NOTIFY_CTSHOLD;
+ else
+ info->mon_data.hold_reason &= ~NPPI_NOTIFY_CTSHOLD;
+
+
+ if (copy_to_user(argp, &info->mon_data, sizeof(struct mxser_mon)))
+ return -EFAULT;
+
+ return 0;
+
+ }
+
+ case MOXA_ASPP_LSTATUS:{
+ if (copy_to_user(argp, &info->err_shadow, sizeof(unsigned char)))
+ return -EFAULT;
+
+ info->err_shadow = 0;
+ return 0;
+
+ }
+ case MOXA_SET_BAUD_METHOD:{
+ int method;
+ if (get_user(method, (int __user *) argp))
+ return -EFAULT;
+ mxser_set_baud_method[info->port] = method;
+ if (copy_to_user(argp, &method, sizeof(int)))
+ return -EFAULT;
+
+ return 0;
+ }
default:
- return (-ENOIOCTLCMD);
+ return -ENOIOCTLCMD;
}
- return (0);
+ return 0;
}
-static int mxser_ioctl_special(unsigned int cmd, unsigned long arg)
+#ifndef CMSPAR
+#define CMSPAR 010000000000
+#endif
+
+static int mxser_ioctl_special(unsigned int cmd, void __user *argp)
{
int i, result, status;
- void __user *argp = (void __user *)arg;
switch (cmd) {
case MOXA_GET_CONF:
- if(copy_to_user(argp, mxsercfg,
- sizeof(struct mxser_hwconf) * 4))
- return -EFAULT;
+ if (copy_to_user(argp, mxsercfg, sizeof(struct mxser_hwconf) * 4))
+ return -EFAULT;
return 0;
case MOXA_GET_MAJOR:
- if(copy_to_user(argp, &ttymajor, sizeof(int)))
+ if (copy_to_user(argp, &ttymajor, sizeof(int)))
return -EFAULT;
return 0;
case MOXA_GET_CUMAJOR:
- result = 0;
- if(copy_to_user(argp, &result, sizeof(int)))
+ if (copy_to_user(argp, &calloutmajor, sizeof(int)))
return -EFAULT;
return 0;
GMStatus[i].cts = 0;
continue;
}
+
if (!mxvar_table[i].tty || !mxvar_table[i].tty->termios)
- GMStatus[i].cflag = mxvar_table[i].cflag;
+ GMStatus[i].cflag = mxvar_table[i].normal_termios.c_cflag;
else
GMStatus[i].cflag = mxvar_table[i].tty->termios->c_cflag;
else
GMStatus[i].cts = 0;
}
- if(copy_to_user(argp, GMStatus,
- sizeof(struct mxser_mstatus) * MXSER_PORTS))
+ if (copy_to_user(argp, GMStatus, sizeof(struct mxser_mstatus) * MXSER_PORTS))
return -EFAULT;
return 0;
+ case MOXA_ASPP_MON_EXT:{
+ int status;
+ int opmode, p;
+ int shiftbit;
+ unsigned cflag, iflag;
+
+ for (i = 0; i < MXSER_PORTS; i++) {
+
+ if (!mxvar_table[i].base)
+ continue;
+
+ status = mxser_get_msr(mxvar_table[i].base, 0, i, &(mxvar_table[i]));
+// mxser_check_modem_status(&mxvar_table[i], status);
+ if (status & UART_MSR_TERI)
+ mxvar_table[i].icount.rng++;
+ if (status & UART_MSR_DDSR)
+ mxvar_table[i].icount.dsr++;
+ if (status & UART_MSR_DDCD)
+ mxvar_table[i].icount.dcd++;
+ if (status & UART_MSR_DCTS)
+ mxvar_table[i].icount.cts++;
+
+ mxvar_table[i].mon_data.modem_status = status;
+ mon_data_ext.rx_cnt[i] = mxvar_table[i].mon_data.rxcnt;
+ mon_data_ext.tx_cnt[i] = mxvar_table[i].mon_data.txcnt;
+ mon_data_ext.up_rxcnt[i] = mxvar_table[i].mon_data.up_rxcnt;
+ mon_data_ext.up_txcnt[i] = mxvar_table[i].mon_data.up_txcnt;
+ mon_data_ext.modem_status[i] = mxvar_table[i].mon_data.modem_status;
+ mon_data_ext.baudrate[i] = mxvar_table[i].realbaud;
+
+ if (!mxvar_table[i].tty || !mxvar_table[i].tty->termios) {
+ cflag = mxvar_table[i].normal_termios.c_cflag;
+ iflag = mxvar_table[i].normal_termios.c_iflag;
+ } else {
+ cflag = mxvar_table[i].tty->termios->c_cflag;
+ iflag = mxvar_table[i].tty->termios->c_iflag;
+ }
+
+ mon_data_ext.databits[i] = cflag & CSIZE;
+
+ mon_data_ext.stopbits[i] = cflag & CSTOPB;
+
+ mon_data_ext.parity[i] = cflag & (PARENB | PARODD | CMSPAR);
+
+ mon_data_ext.flowctrl[i] = 0x00;
+
+ if (cflag & CRTSCTS)
+ mon_data_ext.flowctrl[i] |= 0x03;
+
+ if (iflag & (IXON | IXOFF))
+ mon_data_ext.flowctrl[i] |= 0x0C;
+
+ if (mxvar_table[i].type == PORT_16550A)
+ mon_data_ext.fifo[i] = 1;
+ else
+ mon_data_ext.fifo[i] = 0;
+
+ p = i % 4;
+ shiftbit = p * 2;
+ opmode = inb(mxvar_table[i].opmode_ioaddr) >> shiftbit;
+ opmode &= OP_MODE_MASK;
+
+ mon_data_ext.iftype[i] = opmode;
+
+ }
+ if (copy_to_user(argp, &mon_data_ext, sizeof(struct mxser_mon_ext)))
+ return -EFAULT;
+
+ return 0;
+
+ }
default:
- return (-ENOIOCTLCMD);
+ return -ENOIOCTLCMD;
}
- return (0);
+ return 0;
}
-/*
- * This routine is called by the upper-layer tty layer to signal that
- * incoming characters should be throttled.
- */
-static void mxser_throttle(struct tty_struct *tty)
+
+static void mxser_stoprx(struct tty_struct *tty)
{
struct mxser_struct *info = (struct mxser_struct *) tty->driver_data;
- unsigned long flags;
+ //unsigned long flags;
+
+ info->ldisc_stop_rx = 1;
if (I_IXOFF(tty)) {
- info->x_char = STOP_CHAR(tty);
- save_flags(flags);
- cli();
- outb(info->IER, 0);
- info->IER |= UART_IER_THRI;
- outb(info->IER, info->base + UART_IER); /* force Tx interrupt */
- restore_flags(flags);
+
+ //MX_LOCK(&info->slock);
+ // following add by Victor Yu. 09-02-2002
+ if (info->IsMoxaMustChipFlag) {
+ info->IER &= ~MOXA_MUST_RECV_ISR;
+ outb(info->IER, info->base + UART_IER);
+ } else {
+ // above add by Victor Yu. 09-02-2002
+
+ info->x_char = STOP_CHAR(tty);
+ // outb(info->IER, 0); // mask by Victor Yu. 09-02-2002
+ outb(0, info->base + UART_IER);
+ info->IER |= UART_IER_THRI;
+ outb(info->IER, info->base + UART_IER); /* force Tx interrupt */
+ } // add by Victor Yu. 09-02-2002
+ //MX_UNLOCK(&info->slock);
}
+
if (info->tty->termios->c_cflag & CRTSCTS) {
+ //MX_LOCK(&info->slock);
info->MCR &= ~UART_MCR_RTS;
- save_flags(flags);
- cli();
outb(info->MCR, info->base + UART_MCR);
- restore_flags(flags);
+ //MX_UNLOCK(&info->slock);
}
}
-static void mxser_unthrottle(struct tty_struct *tty)
+static void mxser_startrx(struct tty_struct *tty)
{
struct mxser_struct *info = (struct mxser_struct *) tty->driver_data;
- unsigned long flags;
+ //unsigned long flags;
+ info->ldisc_stop_rx = 0;
if (I_IXOFF(tty)) {
if (info->x_char)
info->x_char = 0;
else {
- info->x_char = START_CHAR(tty);
- save_flags(flags);
- cli();
- outb(info->IER, 0);
- info->IER |= UART_IER_THRI; /* force Tx interrupt */
- outb(info->IER, info->base + UART_IER);
- restore_flags(flags);
+ //MX_LOCK(&info->slock);
+
+ // following add by Victor Yu. 09-02-2002
+ if (info->IsMoxaMustChipFlag) {
+ info->IER |= MOXA_MUST_RECV_ISR;
+ outb(info->IER, info->base + UART_IER);
+ } else {
+ // above add by Victor Yu. 09-02-2002
+
+ info->x_char = START_CHAR(tty);
+ // outb(info->IER, 0); // mask by Victor Yu. 09-02-2002
+ outb(0, info->base + UART_IER); // add by Victor Yu. 09-02-2002
+ info->IER |= UART_IER_THRI; /* force Tx interrupt */
+ outb(info->IER, info->base + UART_IER);
+ } // add by Victor Yu. 09-02-2002
+ //MX_UNLOCK(&info->slock);
}
}
+
if (info->tty->termios->c_cflag & CRTSCTS) {
+ //MX_LOCK(&info->slock);
info->MCR |= UART_MCR_RTS;
- save_flags(flags);
- cli();
outb(info->MCR, info->base + UART_MCR);
- restore_flags(flags);
+ //MX_UNLOCK(&info->slock);
}
}
-static void mxser_set_termios(struct tty_struct *tty,
- struct termios *old_termios)
+/*
+ * This routine is called by the upper-layer tty layer to signal that
+ * incoming characters should be throttled.
+ */
+static void mxser_throttle(struct tty_struct *tty)
+{
+ //struct mxser_struct *info = (struct mxser_struct *)tty->driver_data;
+ //unsigned long flags;
+ //MX_LOCK(&info->slock);
+ mxser_stoprx(tty);
+ //MX_UNLOCK(&info->slock);
+}
+
+static void mxser_unthrottle(struct tty_struct *tty)
+{
+ //struct mxser_struct *info = (struct mxser_struct *)tty->driver_data;
+ //unsigned long flags;
+ //MX_LOCK(&info->slock);
+ mxser_startrx(tty);
+ //MX_UNLOCK(&info->slock);
+}
+
+static void mxser_set_termios(struct tty_struct *tty, struct termios *old_termios)
{
struct mxser_struct *info = (struct mxser_struct *) tty->driver_data;
+ unsigned long flags;
-/* 8-2-99 by William
- if ( (tty->termios->c_cflag == old_termios->c_cflag) &&
- (RELEVANT_IFLAG(tty->termios->c_iflag) ==
- RELEVANT_IFLAG(old_termios->c_iflag)) )
- return;
-
- mxser_change_speed(info, old_termios);
-
- if ( (old_termios->c_cflag & CRTSCTS) &&
- !(tty->termios->c_cflag & CRTSCTS) ) {
- tty->hw_stopped = 0;
- mxser_start(tty);
- }
- */
- if ((tty->termios->c_cflag != old_termios->c_cflag) ||
- (RELEVANT_IFLAG(tty->termios->c_iflag) !=
- RELEVANT_IFLAG(old_termios->c_iflag))) {
+ if ((tty->termios->c_cflag != old_termios->c_cflag) || (RELEVANT_IFLAG(tty->termios->c_iflag) != RELEVANT_IFLAG(old_termios->c_iflag))) {
mxser_change_speed(info, old_termios);
- if ((old_termios->c_cflag & CRTSCTS) &&
- !(tty->termios->c_cflag & CRTSCTS)) {
+ if ((old_termios->c_cflag & CRTSCTS) && !(tty->termios->c_cflag & CRTSCTS)) {
tty->hw_stopped = 0;
mxser_start(tty);
}
}
+
/* Handle sw stopped */
- if ((old_termios->c_iflag & IXON) &&
- !(tty->termios->c_iflag & IXON)) {
+ if ((old_termios->c_iflag & IXON) && !(tty->termios->c_iflag & IXON)) {
tty->stopped = 0;
+
+ // following add by Victor Yu. 09-02-2002
+ if (info->IsMoxaMustChipFlag) {
+ spin_lock_irqsave(&info->slock, flags);
+ DISABLE_MOXA_MUST_RX_SOFTWARE_FLOW_CONTROL(info->base);
+ spin_unlock_irqrestore(&info->slock, flags);
+ }
+ // above add by Victor Yu. 09-02-2002
+
mxser_start(tty);
}
}
struct mxser_struct *info = (struct mxser_struct *) tty->driver_data;
unsigned long flags;
- save_flags(flags);
- cli();
+ spin_lock_irqsave(&info->slock, flags);
if (info->IER & UART_IER_THRI) {
info->IER &= ~UART_IER_THRI;
outb(info->IER, info->base + UART_IER);
}
- restore_flags(flags);
+ spin_unlock_irqrestore(&info->slock, flags);
}
static void mxser_start(struct tty_struct *tty)
struct mxser_struct *info = (struct mxser_struct *) tty->driver_data;
unsigned long flags;
- save_flags(flags);
- cli();
- if (info->xmit_cnt && info->xmit_buf &&
- !(info->IER & UART_IER_THRI)) {
+ spin_lock_irqsave(&info->slock, flags);
+ if (info->xmit_cnt && info->xmit_buf && !(info->IER & UART_IER_THRI)) {
info->IER |= UART_IER_THRI;
outb(info->IER, info->base + UART_IER);
}
- restore_flags(flags);
+ spin_unlock_irqrestore(&info->slock, flags);
+}
+
+/*
+ * mxser_wait_until_sent() --- wait until the transmitter is empty
+ */
+static void mxser_wait_until_sent(struct tty_struct *tty, int timeout)
+{
+ struct mxser_struct *info = (struct mxser_struct *) tty->driver_data;
+ unsigned long orig_jiffies, char_time;
+ int lsr;
+
+ if (info->type == PORT_UNKNOWN)
+ return;
+
+ if (info->xmit_fifo_size == 0)
+ return; /* Just in case.... */
+
+ orig_jiffies = jiffies;
+ /*
+ * Set the check interval to be 1/5 of the estimated time to
+ * send a single character, and make it at least 1. The check
+ * interval should also be less than the timeout.
+ *
+ * Note: we have to use pretty tight timings here to satisfy
+ * the NIST-PCTS.
+ */
+ char_time = (info->timeout - HZ / 50) / info->xmit_fifo_size;
+ char_time = char_time / 5;
+ if (char_time == 0)
+ char_time = 1;
+ if (timeout && timeout < char_time)
+ char_time = timeout;
+ /*
+ * If the transmitter hasn't cleared in twice the approximate
+ * amount of time to send the entire FIFO, it probably won't
+ * ever clear. This assumes the UART isn't doing flow
+ * control, which is currently the case. Hence, if it ever
+ * takes longer than info->timeout, this is probably due to a
+ * UART bug of some kind. So, we clamp the timeout parameter at
+ * 2*info->timeout.
+ */
+ if (!timeout || timeout > 2 * info->timeout)
+ timeout = 2 * info->timeout;
+#ifdef SERIAL_DEBUG_RS_WAIT_UNTIL_SENT
+ printk(KERN_DEBUG "In rs_wait_until_sent(%d) check=%lu...", timeout, char_time);
+ printk("jiff=%lu...", jiffies);
+#endif
+ while (!((lsr = inb(info->base + UART_LSR)) & UART_LSR_TEMT)) {
+#ifdef SERIAL_DEBUG_RS_WAIT_UNTIL_SENT
+ printk("lsr = %d (jiff=%lu)...", lsr, jiffies);
+#endif
+ set_current_state(TASK_INTERRUPTIBLE);
+ schedule_timeout(char_time);
+ if (signal_pending(current))
+ break;
+ if (timeout && time_after(jiffies, orig_jiffies + timeout))
+ break;
+ }
+ set_current_state(TASK_RUNNING);
+
+#ifdef SERIAL_DEBUG_RS_WAIT_UNTIL_SENT
+ printk("lsr = %d (jiff=%lu)...done\n", lsr, jiffies);
+#endif
}
+
/*
* This routine is called by tty_hangup() when a hangup is signaled.
*/
wake_up_interruptible(&info->open_wait);
}
-static inline void mxser_receive_chars(struct mxser_struct *info,
- int *status)
+
+// added by James 03-12-2004.
+/*
+ * mxser_rs_break() --- routine which turns the break handling on or off
+ */
+static void mxser_rs_break(struct tty_struct *tty, int break_state)
+{
+ struct mxser_struct *info = (struct mxser_struct *) tty->driver_data;
+ unsigned long flags;
+
+ spin_lock_irqsave(&info->slock, flags);
+ if (break_state == -1)
+ outb(inb(info->base + UART_LCR) | UART_LCR_SBC, info->base + UART_LCR);
+ else
+ outb(inb(info->base + UART_LCR) & ~UART_LCR_SBC, info->base + UART_LCR);
+ spin_unlock_irqrestore(&info->slock, flags);
+}
+
+// (above) added by James.
+
+
+/*
+ * This is the serial driver's generic interrupt routine
+ */
+static irqreturn_t mxser_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+{
+ int status, iir, i;
+ struct mxser_struct *info;
+ struct mxser_struct *port;
+ int max, irqbits, bits, msr;
+ int pass_counter = 0;
+ int handled = IRQ_NONE;
+
+ port = NULL;
+ //spin_lock(&gm_lock);
+
+ for (i = 0; i < MXSER_BOARDS; i++) {
+ if (dev_id == &(mxvar_table[i * MXSER_PORTS_PER_BOARD])) {
+ port = dev_id;
+ break;
+ }
+ }
+
+ if (i == MXSER_BOARDS) {
+ goto irq_stop;
+ }
+ if (port == 0) {
+ goto irq_stop;
+ }
+ max = mxser_numports[mxsercfg[i].board_type - 1];
+ while (1) {
+ irqbits = inb(port->vector) & port->vectormask;
+ if (irqbits == port->vectormask) {
+ break;
+ }
+
+ handled = IRQ_HANDLED;
+ for (i = 0, bits = 1; i < max; i++, irqbits |= bits, bits <<= 1) {
+ if (irqbits == port->vectormask) {
+ break;
+ }
+ if (bits & irqbits)
+ continue;
+ info = port + i;
+
+ // following add by Victor Yu. 09-13-2002
+ iir = inb(info->base + UART_IIR);
+ if (iir & UART_IIR_NO_INT)
+ continue;
+ iir &= MOXA_MUST_IIR_MASK;
+ if (!info->tty) {
+ status = inb(info->base + UART_LSR);
+ outb(0x27, info->base + UART_FCR);
+ inb(info->base + UART_MSR);
+ continue;
+ }
+ // above add by Victor Yu. 09-13-2002
+ /*
+ if ( info->tty->flip.count < TTY_FLIPBUF_SIZE/4 ){
+ info->IER |= MOXA_MUST_RECV_ISR;
+ outb(info->IER, info->base + UART_IER);
+ }
+ */
+
+
+ /* mask by Victor Yu. 09-13-2002
+ if ( !info->tty ||
+ (inb(info->base + UART_IIR) & UART_IIR_NO_INT) )
+ continue;
+ */
+ /* mask by Victor Yu. 09-02-2002
+ status = inb(info->base + UART_LSR) & info->read_status_mask;
+ */
+
+ // following add by Victor Yu. 09-02-2002
+ status = inb(info->base + UART_LSR);
+
+ if (status & UART_LSR_PE) {
+ info->err_shadow |= NPPI_NOTIFY_PARITY;
+ }
+ if (status & UART_LSR_FE) {
+ info->err_shadow |= NPPI_NOTIFY_FRAMING;
+ }
+ if (status & UART_LSR_OE) {
+ info->err_shadow |= NPPI_NOTIFY_HW_OVERRUN;
+ }
+ if (status & UART_LSR_BI)
+ info->err_shadow |= NPPI_NOTIFY_BREAK;
+
+ if (info->IsMoxaMustChipFlag) {
+ /*
+ if ( (status & 0x02) && !(status & 0x01) ) {
+ outb(info->base+UART_FCR, 0x23);
+ continue;
+ }
+ */
+ if (iir == MOXA_MUST_IIR_GDA || iir == MOXA_MUST_IIR_RDA || iir == MOXA_MUST_IIR_RTO || iir == MOXA_MUST_IIR_LSR)
+ mxser_receive_chars(info, &status);
+
+ } else {
+ // above add by Victor Yu. 09-02-2002
+
+ status &= info->read_status_mask;
+ if (status & UART_LSR_DR)
+ mxser_receive_chars(info, &status);
+ }
+ msr = inb(info->base + UART_MSR);
+ if (msr & UART_MSR_ANY_DELTA) {
+ mxser_check_modem_status(info, msr);
+ }
+ // following add by Victor Yu. 09-13-2002
+ if (info->IsMoxaMustChipFlag) {
+ if ((iir == 0x02) && (status & UART_LSR_THRE)) {
+ mxser_transmit_chars(info);
+ }
+ } else {
+ // above add by Victor Yu. 09-13-2002
+
+ if (status & UART_LSR_THRE) {
+/* 8-2-99 by William
+ if ( info->x_char || (info->xmit_cnt > 0) )
+*/
+ mxser_transmit_chars(info);
+ }
+ }
+ }
+ if (pass_counter++ > MXSER_ISR_PASS_LIMIT) {
+ break; /* Prevent infinite loops */
+ }
+ }
+
+ irq_stop:
+ //spin_unlock(&gm_lock);
+ return handled;
+}
+
+static void mxser_receive_chars(struct mxser_struct *info, int *status)
{
struct tty_struct *tty = info->tty;
- unsigned char ch;
+ unsigned char ch, gdl;
int ignored = 0;
int cnt = 0;
+ unsigned char *cp;
+ char *fp;
+ int count;
+ int recv_room;
+ int max = 256;
+ unsigned long flags;
+
+ spin_lock_irqsave(&info->slock, flags);
+
+ recv_room = tty->ldisc.receive_room(tty);
+ if ((recv_room == 0) && (!info->ldisc_stop_rx)) {
+ //mxser_throttle(tty);
+ mxser_stoprx(tty);
+ //return;
+ }
+
+ cp = tty->flip.char_buf;
+ fp = tty->flip.flag_buf;
+ count = 0;
+
+ // following add by Victor Yu. 09-02-2002
+ if (info->IsMoxaMustChipFlag != MOXA_OTHER_UART) {
+
+ if (*status & UART_LSR_SPECIAL) {
+ goto intr_old;
+ }
+ // following add by Victor Yu. 02-11-2004
+ if (info->IsMoxaMustChipFlag == MOXA_MUST_MU860_HWID && (*status & MOXA_MUST_LSR_RERR))
+ goto intr_old;
+ // above add by Victor Yu. 02-14-2004
+ if (*status & MOXA_MUST_LSR_RERR)
+ goto intr_old;
+
+ gdl = inb(info->base + MOXA_MUST_GDL_REGISTER);
+
+ if (info->IsMoxaMustChipFlag == MOXA_MUST_MU150_HWID) // add by Victor Yu. 02-11-2004
+ gdl &= MOXA_MUST_GDL_MASK;
+ if (gdl >= recv_room) {
+ if (!info->ldisc_stop_rx) {
+ //mxser_throttle(tty);
+ mxser_stoprx(tty);
+ }
+ //return;
+ }
+ while (gdl--) {
+ ch = inb(info->base + UART_RX);
+ count++;
+ *cp++ = ch;
+ *fp++ = 0;
+ cnt++;
+ /*
+ if((count>=HI_WATER) && (info->stop_rx==0)){
+ mxser_stoprx(tty);
+ info->stop_rx=1;
+ break;
+ } */
+ }
+ goto end_intr;
+ }
+intr_old:
+ // above add by Victor Yu. 09-02-2002
do {
+ if (max-- < 0)
+ break;
+ /*
+ if((count>=HI_WATER) && (info->stop_rx==0)){
+ mxser_stoprx(tty);
+ info->stop_rx=1;
+ break;
+ }
+ */
+
ch = inb(info->base + UART_RX);
+ // following add by Victor Yu. 09-02-2002
+ if (info->IsMoxaMustChipFlag && (*status & UART_LSR_OE) /*&& !(*status&UART_LSR_DR) */ )
+ outb(0x23, info->base + UART_FCR);
+ *status &= info->read_status_mask;
+ // above add by Victor Yu. 09-02-2002
if (*status & info->ignore_status_mask) {
if (++ignored > 100)
break;
} else {
- if (tty->flip.count >= TTY_FLIPBUF_SIZE)
- break;
- tty->flip.count++;
+ count++;
if (*status & UART_LSR_SPECIAL) {
if (*status & UART_LSR_BI) {
- *tty->flip.flag_buf_ptr++ = TTY_BREAK;
+ *fp++ = TTY_BREAK;
+/* added by casper 1/11/2000 */
+ info->icount.brk++;
+
+/* */
if (info->flags & ASYNC_SAK)
do_SAK(tty);
} else if (*status & UART_LSR_PE) {
- *tty->flip.flag_buf_ptr++ = TTY_PARITY;
+ *fp++ = TTY_PARITY;
+/* added by casper 1/11/2000 */
+ info->icount.parity++;
+/* */
} else if (*status & UART_LSR_FE) {
- *tty->flip.flag_buf_ptr++ = TTY_FRAME;
+ *fp++ = TTY_FRAME;
+/* added by casper 1/11/2000 */
+ info->icount.frame++;
+/* */
} else if (*status & UART_LSR_OE) {
- *tty->flip.flag_buf_ptr++ = TTY_OVERRUN;
+ *fp++ = TTY_OVERRUN;
+/* added by casper 1/11/2000 */
+ info->icount.overrun++;
+/* */
} else
- *tty->flip.flag_buf_ptr++ = 0;
+ *fp++ = 0;
} else
- *tty->flip.flag_buf_ptr++ = 0;
- *tty->flip.char_buf_ptr++ = ch;
+ *fp++ = 0;
+ *cp++ = ch;
cnt++;
+ if (cnt >= recv_room) {
+ if (!info->ldisc_stop_rx) {
+ //mxser_throttle(tty);
+ mxser_stoprx(tty);
+ }
+ break;
+ }
+
}
- *status = inb(info->base + UART_LSR) & info->read_status_mask;
+
+ // following add by Victor Yu. 09-02-2002
+ if (info->IsMoxaMustChipFlag)
+ break;
+ // above add by Victor Yu. 09-02-2002
+
+ /* mask by Victor Yu. 09-02-2002
+ *status = inb(info->base + UART_LSR) & info->read_status_mask;
+ */
+ // following add by Victor Yu. 09-02-2002
+ *status = inb(info->base + UART_LSR);
+ // above add by Victor Yu. 09-02-2002
} while (*status & UART_LSR_DR);
- mxvar_log.rxcnt[info->port] += cnt;
- schedule_delayed_work(&tty->flip.work, 1);
+ end_intr: // add by Victor Yu. 09-02-2002
+
+ mxvar_log.rxcnt[info->port] += cnt;
+ info->mon_data.rxcnt += cnt;
+ info->mon_data.up_rxcnt += cnt;
+ spin_unlock_irqrestore(&info->slock, flags);
+
+ tty_flip_buffer_push(tty);
}
-static inline void mxser_transmit_chars(struct mxser_struct *info)
+static void mxser_transmit_chars(struct mxser_struct *info)
{
int count, cnt;
+ unsigned long flags;
+
+ spin_lock_irqsave(&info->slock, flags);
if (info->x_char) {
outb(info->x_char, info->base + UART_TX);
info->x_char = 0;
mxvar_log.txcnt[info->port]++;
+ info->mon_data.txcnt++;
+ info->mon_data.up_txcnt++;
+
+/* added by casper 1/11/2000 */
+ info->icount.tx++;
+/* */
+ spin_unlock_irqrestore(&info->slock, flags);
return;
}
- if ((info->xmit_cnt <= 0) || info->tty->stopped ||
- info->tty->hw_stopped) {
+
+ if (info->xmit_buf == 0) {
+ spin_unlock_irqrestore(&info->slock, flags);
+ return;
+ }
+
+ if ((info->xmit_cnt <= 0) || info->tty->stopped || (info->tty->hw_stopped && (info->type != PORT_16550A) && (!info->IsMoxaMustChipFlag))) {
info->IER &= ~UART_IER_THRI;
outb(info->IER, info->base + UART_IER);
+ spin_unlock_irqrestore(&info->slock, flags);
return;
}
+
cnt = info->xmit_cnt;
count = info->xmit_fifo_size;
do {
} while (--count > 0);
mxvar_log.txcnt[info->port] += (cnt - info->xmit_cnt);
+// added by James 03-12-2004.
+ info->mon_data.txcnt += (cnt - info->xmit_cnt);
+ info->mon_data.up_txcnt += (cnt - info->xmit_cnt);
+// (above) added by James.
+
+/* added by casper 1/11/2000 */
+ info->icount.tx += (cnt - info->xmit_cnt);
+/* */
+
if (info->xmit_cnt < WAKEUP_CHARS) {
set_bit(MXSER_EVENT_TXLOW, &info->event);
schedule_work(&info->tqueue);
info->IER &= ~UART_IER_THRI;
outb(info->IER, info->base + UART_IER);
}
+ spin_unlock_irqrestore(&info->slock, flags);
}
-static inline void mxser_check_modem_status(struct mxser_struct *info,
- int status)
+static void mxser_check_modem_status(struct mxser_struct *info, int status)
{
-
/* update input line counters */
if (status & UART_MSR_TERI)
info->icount.rng++;
info->icount.dcd++;
if (status & UART_MSR_DCTS)
info->icount.cts++;
+ info->mon_data.modem_status = status;
wake_up_interruptible(&info->delta_msr_wait);
+
if ((info->flags & ASYNC_CHECK_CD) && (status & UART_MSR_DDCD)) {
if (status & UART_MSR_DCD)
wake_up_interruptible(&info->open_wait);
- else
- set_bit(MXSER_EVENT_HANGUP, &info->event);
schedule_work(&info->tqueue);
}
+
if (info->flags & ASYNC_CTS_FLOW) {
if (info->tty->hw_stopped) {
if (status & UART_MSR_CTS) {
info->tty->hw_stopped = 0;
- info->IER |= UART_IER_THRI;
- outb(info->IER, info->base + UART_IER);
-
- set_bit(MXSER_EVENT_TXLOW, &info->event);
- schedule_work(&info->tqueue);
- }
- } else {
- if (!(status & UART_MSR_CTS)) {
- info->tty->hw_stopped = 1;
- info->IER &= ~UART_IER_THRI;
- outb(info->IER, info->base + UART_IER);
- }
- }
- }
-}
-
-/*
- * This is the serial driver's generic interrupt routine
- */
-static irqreturn_t mxser_interrupt(int irq, void *dev_id, struct pt_regs *regs)
-{
- int status, i;
- struct mxser_struct *info;
- struct mxser_struct *port;
- int max, irqbits, bits, msr;
- int pass_counter = 0;
- int handled = 0;
-
- port = NULL;
- for (i = 0; i < MXSER_BOARDS; i++) {
- if (dev_id == &(mxvar_table[i * MXSER_PORTS_PER_BOARD])) {
- port = dev_id;
- break;
- }
- }
-
- if (i == MXSER_BOARDS)
- return IRQ_NONE;
- if (port == 0)
- return IRQ_NONE;
- max = mxser_numports[mxsercfg[i].board_type];
-
- while (1) {
- irqbits = inb(port->vector) & port->vectormask;
- if (irqbits == port->vectormask)
- break;
- handled = 1;
- for (i = 0, bits = 1; i < max; i++, irqbits |= bits, bits <<= 1) {
- if (irqbits == port->vectormask)
- break;
- if (bits & irqbits)
- continue;
- info = port + i;
- if (!info->tty ||
- (inb(info->base + UART_IIR) & UART_IIR_NO_INT))
- continue;
- status = inb(info->base + UART_LSR) & info->read_status_mask;
- if (status & UART_LSR_DR)
- mxser_receive_chars(info, &status);
- msr = inb(info->base + UART_MSR);
- if (msr & UART_MSR_ANY_DELTA)
- mxser_check_modem_status(info, msr);
- if (status & UART_LSR_THRE) {
-/* 8-2-99 by William
- if ( info->x_char || (info->xmit_cnt > 0) )
- */
- mxser_transmit_chars(info);
+
+ if ((info->type != PORT_16550A) && (!info->IsMoxaMustChipFlag)) {
+ info->IER |= UART_IER_THRI;
+ outb(info->IER, info->base + UART_IER);
+ }
+ set_bit(MXSER_EVENT_TXLOW, &info->event);
+ schedule_work(&info->tqueue); }
+ } else {
+ if (!(status & UART_MSR_CTS)) {
+ info->tty->hw_stopped = 1;
+ if ((info->type != PORT_16550A) && (!info->IsMoxaMustChipFlag)) {
+ info->IER &= ~UART_IER_THRI;
+ outb(info->IER, info->base + UART_IER);
+ }
}
}
- if (pass_counter++ > MXSER_ISR_PASS_LIMIT) {
-#if 0
- printk("MOXA Smartio/Indusrtio family driver interrupt loop break\n");
-#endif
- break; /* Prevent infinite loops */
- }
}
- return IRQ_RETVAL(handled);
}
-static int mxser_block_til_ready(struct tty_struct *tty, struct file *filp,
- struct mxser_struct *info)
+static int mxser_block_til_ready(struct tty_struct *tty, struct file *filp, struct mxser_struct *info)
{
DECLARE_WAITQUEUE(wait, current);
- unsigned long flags;
int retval;
int do_clocal = 0;
+ unsigned long flags;
- /*
- * If the device is in the middle of being closed, then block
- * until it's done, and then try again.
- */
- if (tty_hung_up_p(filp) || (info->flags & ASYNC_CLOSING)) {
- if (info->flags & ASYNC_CLOSING)
- interruptible_sleep_on(&info->close_wait);
-#ifdef SERIAL_DO_RESTART
- if (info->flags & ASYNC_HUP_NOTIFY)
- return (-EAGAIN);
- else
- return (-ERESTARTSYS);
-#else
- return (-EAGAIN);
-#endif
- }
/*
* If non-blocking mode is set, or the port is not enabled,
* then make the check up front and then exit.
*/
- if ((filp->f_flags & O_NONBLOCK) ||
- (tty->flags & (1 << TTY_IO_ERROR))) {
+ if ((filp->f_flags & O_NONBLOCK) || (tty->flags & (1 << TTY_IO_ERROR))) {
info->flags |= ASYNC_NORMAL_ACTIVE;
return (0);
}
+
if (tty->termios->c_cflag & CLOCAL)
do_clocal = 1;
*/
retval = 0;
add_wait_queue(&info->open_wait, &wait);
- save_flags(flags);
- cli();
+
+ spin_lock_irqsave(&info->slock, flags);
if (!tty_hung_up_p(filp))
info->count--;
- restore_flags(flags);
+ spin_unlock_irqrestore(&info->slock, flags);
info->blocked_open++;
while (1) {
- save_flags(flags);
- cli();
- outb(inb(info->base + UART_MCR) | UART_MCR_DTR | UART_MCR_RTS,
- info->base + UART_MCR);
- restore_flags(flags);
+ spin_lock_irqsave(&info->slock, flags);
+ outb(inb(info->base + UART_MCR) | UART_MCR_DTR | UART_MCR_RTS, info->base + UART_MCR);
+ spin_unlock_irqrestore(&info->slock, flags);
set_current_state(TASK_INTERRUPTIBLE);
if (tty_hung_up_p(filp) || !(info->flags & ASYNC_INITIALIZED)) {
-#ifdef SERIAL_DO_RESTART
if (info->flags & ASYNC_HUP_NOTIFY)
retval = -EAGAIN;
else
retval = -ERESTARTSYS;
-#else
- retval = -EAGAIN;
-#endif
break;
}
- if (!(info->flags & ASYNC_CLOSING) &&
- (do_clocal || (inb(info->base + UART_MSR) & UART_MSR_DCD)))
+ if (!(info->flags & ASYNC_CLOSING) && (do_clocal || (inb(info->base + UART_MSR) & UART_MSR_DCD)))
break;
if (signal_pending(current)) {
retval = -ERESTARTSYS;
static int mxser_startup(struct mxser_struct *info)
{
- unsigned long flags;
+
unsigned long page;
+ unsigned long flags;
- page = get_zeroed_page(GFP_KERNEL);
+ page = __get_free_page(GFP_KERNEL);
if (!page)
return (-ENOMEM);
- save_flags(flags);
- cli();
+ spin_lock_irqsave(&info->slock, flags);
if (info->flags & ASYNC_INITIALIZED) {
free_page(page);
- restore_flags(flags);
+ spin_unlock_irqrestore(&info->slock, flags);
return (0);
}
+
if (!info->base || !info->type) {
if (info->tty)
set_bit(TTY_IO_ERROR, &info->tty->flags);
free_page(page);
- restore_flags(flags);
+ spin_unlock_irqrestore(&info->slock, flags);
return (0);
}
if (info->xmit_buf)
* Clear the FIFO buffers and disable them
* (they will be reenabled in mxser_change_speed())
*/
- if (info->xmit_fifo_size == 16)
- outb((UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT),
- info->base + UART_FCR);
+ if (info->IsMoxaMustChipFlag)
+ outb((UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT | MOXA_MUST_FCR_GDA_MODE_ENABLE), info->base + UART_FCR);
+ else
+ outb((UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT), info->base + UART_FCR);
/*
* At this point there's no way the LSR could still be 0xFF;
* here.
*/
if (inb(info->base + UART_LSR) == 0xff) {
- restore_flags(flags);
+ spin_unlock_irqrestore(&info->slock, flags);
if (capable(CAP_SYS_ADMIN)) {
if (info->tty)
set_bit(TTY_IO_ERROR, &info->tty->flags);
} else
return (-ENODEV);
}
+
/*
* Clear the interrupt registers.
*/
* Finally, enable interrupts
*/
info->IER = UART_IER_MSI | UART_IER_RLSI | UART_IER_RDI;
- outb(info->IER, info->base + UART_IER); /* enable interrupts */
+// info->IER = UART_IER_RLSI | UART_IER_RDI;
+
+ // following add by Victor Yu. 08-30-2002
+ if (info->IsMoxaMustChipFlag)
+ info->IER |= MOXA_MUST_IER_EGDAI;
+ // above add by Victor Yu. 08-30-2002
+ outb(info->IER, info->base + UART_IER); /* enable interrupts */
/*
* And clear the interrupt registers again for luck.
(void) inb(info->base + UART_MSR);
if (info->tty)
- test_and_clear_bit(TTY_IO_ERROR, &info->tty->flags);
-
+ clear_bit(TTY_IO_ERROR, &info->tty->flags);
info->xmit_cnt = info->xmit_head = info->xmit_tail = 0;
/*
* and set the speed of the serial port
*/
+ spin_unlock_irqrestore(&info->slock, flags);
mxser_change_speed(info, NULL);
info->flags |= ASYNC_INITIALIZED;
- restore_flags(flags);
return (0);
}
if (!(info->flags & ASYNC_INITIALIZED))
return;
- save_flags(flags);
- cli(); /* Disable interrupts */
+ spin_lock_irqsave(&info->slock, flags);
/*
* clear delta_msr_wait queue to avoid mem leaks: we may free the irq
free_page((unsigned long) info->xmit_buf);
info->xmit_buf = NULL;
}
+
info->IER = 0;
- outb(0x00, info->base + UART_IER); /* disable all intrs */
+ outb(0x00, info->base + UART_IER);
if (!info->tty || (info->tty->termios->c_cflag & HUPCL))
info->MCR &= ~(UART_MCR_DTR | UART_MCR_RTS);
outb(info->MCR, info->base + UART_MCR);
/* clear Rx/Tx FIFO's */
- outb((UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT), info->base + UART_FCR);
+ // following add by Victor Yu. 08-30-2002
+ if (info->IsMoxaMustChipFlag)
+ outb((UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT | MOXA_MUST_FCR_GDA_MODE_ENABLE), info->base + UART_FCR);
+ else
+ // above add by Victor Yu. 08-30-2002
+ outb((UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT), info->base + UART_FCR);
+
/* read data port to reset things */
(void) inb(info->base + UART_RX);
set_bit(TTY_IO_ERROR, &info->tty->flags);
info->flags &= ~ASYNC_INITIALIZED;
- restore_flags(flags);
+
+ // following add by Victor Yu. 09-23-2002
+ if (info->IsMoxaMustChipFlag) {
+ SET_MOXA_MUST_NO_SOFTWARE_FLOW_CONTROL(info->base);
+ }
+ // above add by Victor Yu. 09-23-2002
+
+ spin_unlock_irqrestore(&info->slock, flags);
}
/*
* This routine is called to set the UART divisor registers to match
* the specified baud rate for a serial port.
*/
-static int mxser_change_speed(struct mxser_struct *info,
- struct termios *old_termios)
+static int mxser_change_speed(struct mxser_struct *info, struct termios *old_termios)
{
- int quot = 0;
unsigned cflag, cval, fcr;
- int i;
int ret = 0;
+ unsigned char status;
+ long baud;
unsigned long flags;
+
if (!info->tty || !info->tty->termios)
return ret;
cflag = info->tty->termios->c_cflag;
if (!(info->base))
return ret;
+
#ifndef B921600
#define B921600 (B460800 +1)
#endif
- switch (cflag & (CBAUD | CBAUDEX)) {
- case B921600:
- i = 20;
- break;
- case B460800:
- i = 19;
- break;
- case B230400:
- i = 18;
- break;
- case B115200:
- i = 17;
- break;
- case B57600:
- i = 16;
- break;
- case B38400:
- i = 15;
- break;
- case B19200:
- i = 14;
- break;
- case B9600:
- i = 13;
- break;
- case B4800:
- i = 12;
- break;
- case B2400:
- i = 11;
- break;
- case B1800:
- i = 10;
- break;
- case B1200:
- i = 9;
- break;
- case B600:
- i = 8;
- break;
- case B300:
- i = 7;
- break;
- case B200:
- i = 6;
- break;
- case B150:
- i = 5;
- break;
- case B134:
- i = 4;
- break;
- case B110:
- i = 3;
- break;
- case B75:
- i = 2;
- break;
- case B50:
- i = 1;
- break;
- default:
- i = 0;
- break;
- }
-
- if (i == 15) {
- if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI)
- i = 16; /* 57600 bps */
- if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI)
- i = 17; /* 115200 bps */
-
-#ifdef ASYNC_SPD_SHI
- if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI)
- i = 18;
-#endif
-
-#ifdef ASYNC_SPD_WARP
- if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP)
- i = 19;
-#endif
- }
- if (mxvar_baud_table[i] == 134) {
- quot = (2 * info->baud_base / 269);
- } else if (mxvar_baud_table[i]) {
- quot = info->baud_base / mxvar_baud_table[i];
- if (!quot && old_termios) {
- /* re-calculate */
- info->tty->termios->c_cflag &= ~CBAUD;
- info->tty->termios->c_cflag |= (old_termios->c_cflag & CBAUD);
- switch (info->tty->termios->c_cflag & (CBAUD | CBAUDEX)) {
- case B921600:
- i = 20;
- break;
- case B460800:
- i = 19;
- break;
- case B230400:
- i = 18;
- break;
- case B115200:
- i = 17;
- break;
- case B57600:
- i = 16;
- break;
- case B38400:
- i = 15;
- break;
- case B19200:
- i = 14;
- break;
- case B9600:
- i = 13;
- break;
- case B4800:
- i = 12;
- break;
- case B2400:
- i = 11;
- break;
- case B1800:
- i = 10;
- break;
- case B1200:
- i = 9;
- break;
- case B600:
- i = 8;
- break;
- case B300:
- i = 7;
- break;
- case B200:
- i = 6;
- break;
- case B150:
- i = 5;
- break;
- case B134:
- i = 4;
- break;
- case B110:
- i = 3;
- break;
- case B75:
- i = 2;
- break;
- case B50:
- i = 1;
- break;
- default:
- i = 0;
- break;
- }
- if (i == 15) {
- if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI)
- i = 16; /* 57600 bps */
- if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI)
- i = 17; /* 115200 bps */
-#ifdef ASYNC_SPD_SHI
- if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI)
- i = 18;
-#endif
-#ifdef ASYNC_SPD_WARP
- if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP)
- i = 19;
-#endif
- }
- if (mxvar_baud_table[i] == 134) {
- quot = (2 * info->baud_base / 269);
- } else if (mxvar_baud_table[i]) {
- quot = info->baud_base / mxvar_baud_table[i];
- if (quot == 0)
- quot = 1;
- } else {
- quot = 0;
- }
- } else if (quot == 0)
- quot = 1;
- } else {
- quot = 0;
+ if (mxser_set_baud_method[info->port] == 0) {
+ switch (cflag & (CBAUD | CBAUDEX)) {
+ case B921600:
+ baud = 921600;
+ break;
+ case B460800:
+ baud = 460800;
+ break;
+ case B230400:
+ baud = 230400;
+ break;
+ case B115200:
+ baud = 115200;
+ break;
+ case B57600:
+ baud = 57600;
+ break;
+ case B38400:
+ baud = 38400;
+ break;
+ case B19200:
+ baud = 19200;
+ break;
+ case B9600:
+ baud = 9600;
+ break;
+ case B4800:
+ baud = 4800;
+ break;
+ case B2400:
+ baud = 2400;
+ break;
+ case B1800:
+ baud = 1800;
+ break;
+ case B1200:
+ baud = 1200;
+ break;
+ case B600:
+ baud = 600;
+ break;
+ case B300:
+ baud = 300;
+ break;
+ case B200:
+ baud = 200;
+ break;
+ case B150:
+ baud = 150;
+ break;
+ case B134:
+ baud = 134;
+ break;
+ case B110:
+ baud = 110;
+ break;
+ case B75:
+ baud = 75;
+ break;
+ case B50:
+ baud = 50;
+ break;
+ default:
+ baud = 0;
+ break;
+ }
+ mxser_set_baud(info, baud);
}
- if (quot) {
- info->MCR |= UART_MCR_DTR;
- save_flags(flags);
- cli();
- outb(info->MCR, info->base + UART_MCR);
- restore_flags(flags);
- } else {
- info->MCR &= ~UART_MCR_DTR;
- save_flags(flags);
- cli();
- outb(info->MCR, info->base + UART_MCR);
- restore_flags(flags);
- return ret;
- }
/* byte size and parity */
switch (cflag & CSIZE) {
case CS5:
cval |= 0x04;
if (cflag & PARENB)
cval |= UART_LCR_PARITY;
- if (!(cflag & PARODD))
+ if (!(cflag & PARODD)) {
cval |= UART_LCR_EPAR;
+ }
+ if (cflag & CMSPAR)
+ cval |= UART_LCR_SPAR;
+
if ((info->type == PORT_8250) || (info->type == PORT_16450)) {
- fcr = 0;
+ if (info->IsMoxaMustChipFlag) {
+ fcr = UART_FCR_ENABLE_FIFO;
+ fcr |= MOXA_MUST_FCR_GDA_MODE_ENABLE;
+ SET_MOXA_MUST_FIFO_VALUE(info);
+ } else
+ fcr = 0;
} else {
fcr = UART_FCR_ENABLE_FIFO;
- switch (info->rx_trigger) {
- case 1:
- fcr |= UART_FCR_TRIGGER_1;
- break;
- case 4:
- fcr |= UART_FCR_TRIGGER_4;
- break;
- case 8:
- fcr |= UART_FCR_TRIGGER_8;
- break;
- default:
- fcr |= UART_FCR_TRIGGER_14;
+ // following add by Victor Yu. 08-30-2002
+ if (info->IsMoxaMustChipFlag) {
+ fcr |= MOXA_MUST_FCR_GDA_MODE_ENABLE;
+ SET_MOXA_MUST_FIFO_VALUE(info);
+ } else {
+ // above add by Victor Yu. 08-30-2002
+
+ switch (info->rx_trigger) {
+ case 1:
+ fcr |= UART_FCR_TRIGGER_1;
+ break;
+ case 4:
+ fcr |= UART_FCR_TRIGGER_4;
+ break;
+ case 8:
+ fcr |= UART_FCR_TRIGGER_8;
+ break;
+ default:
+ fcr |= UART_FCR_TRIGGER_14;
+ break;
+ }
}
}
if (cflag & CRTSCTS) {
info->flags |= ASYNC_CTS_FLOW;
info->IER |= UART_IER_MSI;
- if (info->type == PORT_16550A)
+ if ((info->type == PORT_16550A) || (info->IsMoxaMustChipFlag)) {
info->MCR |= UART_MCR_AFE;
+ //status = mxser_get_msr(info->base, 0, info->port);
+/* save_flags(flags);
+ cli();
+ status = inb(baseaddr + UART_MSR);
+ restore_flags(flags);*/
+ //mxser_check_modem_status(info, status);
+ } else {
+ //status = mxser_get_msr(info->base, 0, info->port);
+
+ //MX_LOCK(&info->slock);
+ status = inb(info->base + UART_MSR);
+ //MX_UNLOCK(&info->slock);
+ if (info->tty->hw_stopped) {
+ if (status & UART_MSR_CTS) {
+ info->tty->hw_stopped = 0;
+ if ((info->type != PORT_16550A) && (!info->IsMoxaMustChipFlag)) {
+ info->IER |= UART_IER_THRI;
+ outb(info->IER, info->base + UART_IER);
+ }
+ set_bit(MXSER_EVENT_TXLOW, &info->event);
+ schedule_work(&info->tqueue); }
+ } else {
+ if (!(status & UART_MSR_CTS)) {
+ info->tty->hw_stopped = 1;
+ if ((info->type != PORT_16550A) && (!info->IsMoxaMustChipFlag)) {
+ info->IER &= ~UART_IER_THRI;
+ outb(info->IER, info->base + UART_IER);
+ }
+ }
+ }
+ }
} else {
info->flags &= ~ASYNC_CTS_FLOW;
}
outb(info->MCR, info->base + UART_MCR);
- if (cflag & CLOCAL)
+ if (cflag & CLOCAL) {
info->flags &= ~ASYNC_CHECK_CD;
- else {
+ } else {
info->flags |= ASYNC_CHECK_CD;
info->IER |= UART_IER_MSI;
}
info->read_status_mask |= UART_LSR_BI;
info->ignore_status_mask = 0;
-#if 0
- /* This should be safe, but for some broken bits of hardware... */
- if (I_IGNPAR(info->tty)) {
- info->ignore_status_mask |= UART_LSR_PE | UART_LSR_FE;
- info->read_status_mask |= UART_LSR_PE | UART_LSR_FE;
- }
-#endif
+
if (I_IGNBRK(info->tty)) {
info->ignore_status_mask |= UART_LSR_BI;
info->read_status_mask |= UART_LSR_BI;
info->read_status_mask |= UART_LSR_OE | UART_LSR_PE | UART_LSR_FE;
}
}
- save_flags(flags);
- cli();
+ // following add by Victor Yu. 09-02-2002
+ if (info->IsMoxaMustChipFlag) {
+ spin_lock_irqsave(&info->slock, flags);
+ SET_MOXA_MUST_XON1_VALUE(info->base, START_CHAR(info->tty));
+ SET_MOXA_MUST_XOFF1_VALUE(info->base, STOP_CHAR(info->tty));
+ if (I_IXON(info->tty)) {
+ ENABLE_MOXA_MUST_RX_SOFTWARE_FLOW_CONTROL(info->base);
+ } else {
+ DISABLE_MOXA_MUST_RX_SOFTWARE_FLOW_CONTROL(info->base);
+ }
+ if (I_IXOFF(info->tty)) {
+ ENABLE_MOXA_MUST_TX_SOFTWARE_FLOW_CONTROL(info->base);
+ } else {
+ DISABLE_MOXA_MUST_TX_SOFTWARE_FLOW_CONTROL(info->base);
+ }
+ /*
+ if ( I_IXANY(info->tty) ) {
+ info->MCR |= MOXA_MUST_MCR_XON_ANY;
+ ENABLE_MOXA_MUST_XON_ANY_FLOW_CONTROL(info->base);
+ } else {
+ info->MCR &= ~MOXA_MUST_MCR_XON_ANY;
+ DISABLE_MOXA_MUST_XON_ANY_FLOW_CONTROL(info->base);
+ }
+ */
+ spin_unlock_irqrestore(&info->slock, flags);
+ }
+ // above add by Victor Yu. 09-02-2002
+
+
+ outb(fcr, info->base + UART_FCR); /* set fcr */
+ outb(cval, info->base + UART_LCR);
+
+ return ret;
+}
+
+
+static int mxser_set_baud(struct mxser_struct *info, long newspd)
+{
+ int quot = 0;
+ unsigned char cval;
+ int ret = 0;
+ unsigned long flags;
+
+ if (!info->tty || !info->tty->termios)
+ return ret;
+
+ if (!(info->base))
+ return ret;
+
+ if (newspd > info->MaxCanSetBaudRate)
+ return 0;
+
+ info->realbaud = newspd;
+ if (newspd == 134) {
+ quot = (2 * info->baud_base / 269);
+ } else if (newspd) {
+ quot = info->baud_base / newspd;
+
+ if (quot == 0)
+ quot = 1;
+
+ } else {
+ quot = 0;
+ }
+
+ info->timeout = ((info->xmit_fifo_size * HZ * 10 * quot) / info->baud_base);
+ info->timeout += HZ / 50; /* Add .02 seconds of slop */
+
+ if (quot) {
+ spin_lock_irqsave(&info->slock, flags);
+ info->MCR |= UART_MCR_DTR;
+ outb(info->MCR, info->base + UART_MCR);
+ spin_unlock_irqrestore(&info->slock, flags);
+ } else {
+ spin_lock_irqsave(&info->slock, flags);
+ info->MCR &= ~UART_MCR_DTR;
+ outb(info->MCR, info->base + UART_MCR);
+ spin_unlock_irqrestore(&info->slock, flags);
+ return ret;
+ }
+
+ cval = inb(info->base + UART_LCR);
+
outb(cval | UART_LCR_DLAB, info->base + UART_LCR); /* set DLAB */
+
outb(quot & 0xff, info->base + UART_DLL); /* LS of divisor */
- outb(quot >> 8, info->base + UART_DLM); /* MS of divisor */
+ outb(quot >> 8, info->base + UART_DLM); /* MS of divisor */
outb(cval, info->base + UART_LCR); /* reset DLAB */
- outb(fcr, info->base + UART_FCR); /* set fcr */
- restore_flags(flags);
+
return ret;
}
+
+
/*
* ------------------------------------------------------------
* friends of mxser_ioctl()
* ------------------------------------------------------------
*/
-static int mxser_get_serial_info(struct mxser_struct *info,
- struct serial_struct __user *retinfo)
+static int mxser_get_serial_info(struct mxser_struct *info, struct serial_struct __user *retinfo)
{
struct serial_struct tmp;
tmp.closing_wait = info->closing_wait;
tmp.custom_divisor = info->custom_divisor;
tmp.hub6 = 0;
- return copy_to_user(retinfo, &tmp, sizeof(*retinfo)) ? -EFAULT : 0;
+ if (copy_to_user(retinfo, &tmp, sizeof(*retinfo)))
+ return -EFAULT;
+ return (0);
}
-static int mxser_set_serial_info(struct mxser_struct *info,
- struct serial_struct __user *new_info)
+static int mxser_set_serial_info(struct mxser_struct *info, struct serial_struct __user *new_info)
{
struct serial_struct new_serial;
unsigned int flags;
if (copy_from_user(&new_serial, new_info, sizeof(new_serial)))
return -EFAULT;
- if ((new_serial.irq != info->irq) ||
- (new_serial.port != info->base) ||
- (new_serial.type != info->type) ||
- (new_serial.custom_divisor != info->custom_divisor) ||
- (new_serial.baud_base != info->baud_base))
+ if ((new_serial.irq != info->irq) || (new_serial.port != info->base) || (new_serial.custom_divisor != info->custom_divisor) || (new_serial.baud_base != info->baud_base))
return (-EPERM);
flags = info->flags & ASYNC_SPD_MASK;
if (!capable(CAP_SYS_ADMIN)) {
- if ((new_serial.baud_base != info->baud_base) ||
- (new_serial.close_delay != info->close_delay) ||
- ((new_serial.flags & ~ASYNC_USR_MASK) !=
- (info->flags & ~ASYNC_USR_MASK)))
+ if ((new_serial.baud_base != info->baud_base) || (new_serial.close_delay != info->close_delay) || ((new_serial.flags & ~ASYNC_USR_MASK) != (info->flags & ~ASYNC_USR_MASK)))
return (-EPERM);
- info->flags = ((info->flags & ~ASYNC_USR_MASK) |
- (new_serial.flags & ASYNC_USR_MASK));
+ info->flags = ((info->flags & ~ASYNC_USR_MASK) | (new_serial.flags & ASYNC_USR_MASK));
} else {
/*
* OK, past this point, all the error checking has been done.
* At this point, we start making changes.....
*/
- info->flags = ((info->flags & ~ASYNC_FLAGS) |
- (new_serial.flags & ASYNC_FLAGS));
+ info->flags = ((info->flags & ~ASYNC_FLAGS) | (new_serial.flags & ASYNC_FLAGS));
info->close_delay = new_serial.close_delay * HZ / 100;
info->closing_wait = new_serial.closing_wait * HZ / 100;
+ info->tty->low_latency = (info->flags & ASYNC_LOW_LATENCY) ? 1 : 0;
+ info->tty->low_latency = 0; //(info->flags & ASYNC_LOW_LATENCY) ? 1 : 0;
}
+ /* added by casper, 3/17/2000, for mouse */
+ info->type = new_serial.type;
+
+ process_txrx_fifo(info);
+
+ /* */
if (info->flags & ASYNC_INITIALIZED) {
if (flags != (info->flags & ASYNC_SPD_MASK)) {
mxser_change_speed(info, NULL);
}
- } else
+ } else {
retval = mxser_startup(info);
+ }
return (retval);
}
* mxser_get_lsr_info - get line status register info
*
* Purpose: Let user call ioctl() to get info when the UART physically
- * is emptied. On bus types like RS485, the transmitter must
- * release the bus after transmitting. This must be done when
- * the transmit shift register is empty, not be done when the
- * transmit holding register is empty. This functionality
- * allows an RS485 driver to be written in user space.
+ * is emptied. On bus types like RS485, the transmitter must
+ * release the bus after transmitting. This must be done when
+ * the transmit shift register is empty, not be done when the
+ * transmit holding register is empty. This functionality
+ * allows an RS485 driver to be written in user space.
*/
static int mxser_get_lsr_info(struct mxser_struct *info, unsigned int __user *value)
{
unsigned int result;
unsigned long flags;
- save_flags(flags);
- cli();
+ spin_lock_irqsave(&info->slock, flags);
status = inb(info->base + UART_LSR);
- restore_flags(flags);
+ spin_unlock_irqrestore(&info->slock, flags);
result = ((status & UART_LSR_TEMT) ? TIOCSER_TEMT : 0);
return put_user(result, value);
}
static void mxser_send_break(struct mxser_struct *info, int duration)
{
unsigned long flags;
+
if (!info->base)
return;
set_current_state(TASK_INTERRUPTIBLE);
- save_flags(flags);
- cli();
+ spin_lock_irqsave(&info->slock, flags);
outb(inb(info->base + UART_LCR) | UART_LCR_SBC, info->base + UART_LCR);
+ spin_unlock_irqrestore(&info->slock, flags);
schedule_timeout(duration);
+ spin_lock_irqsave(&info->slock, flags);
outb(inb(info->base + UART_LCR) & ~UART_LCR_SBC, info->base + UART_LCR);
- restore_flags(flags);
+ spin_unlock_irqrestore(&info->slock, flags);
}
static int mxser_tiocmget(struct tty_struct *tty, struct file *file)
unsigned char control, status;
unsigned long flags;
- if (PORTNO(tty) == MXSER_PORTS)
+
+ if (tty->index == MXSER_PORTS)
return (-ENOIOCTLCMD);
if (tty->flags & (1 << TTY_IO_ERROR))
return (-EIO);
control = info->MCR;
- save_flags(flags);
- cli();
+
+ spin_lock_irqsave(&info->slock, flags);
status = inb(info->base + UART_MSR);
if (status & UART_MSR_ANY_DELTA)
mxser_check_modem_status(info, status);
- restore_flags(flags);
+ spin_unlock_irqrestore(&info->slock, flags);
return ((control & UART_MCR_RTS) ? TIOCM_RTS : 0) |
- ((control & UART_MCR_DTR) ? TIOCM_DTR : 0) |
- ((status & UART_MSR_DCD) ? TIOCM_CAR : 0) |
- ((status & UART_MSR_RI) ? TIOCM_RNG : 0) |
- ((status & UART_MSR_DSR) ? TIOCM_DSR : 0) |
- ((status & UART_MSR_CTS) ? TIOCM_CTS : 0);
+ ((control & UART_MCR_DTR) ? TIOCM_DTR : 0) | ((status & UART_MSR_DCD) ? TIOCM_CAR : 0) | ((status & UART_MSR_RI) ? TIOCM_RNG : 0) | ((status & UART_MSR_DSR) ? TIOCM_DSR : 0) | ((status & UART_MSR_CTS) ? TIOCM_CTS : 0);
}
-static int mxser_tiocmset(struct tty_struct *tty, struct file *file,
- unsigned int set, unsigned int clear)
+static int mxser_tiocmset(struct tty_struct *tty, struct file *file, unsigned int set, unsigned int clear)
{
struct mxser_struct *info = (struct mxser_struct *) tty->driver_data;
unsigned long flags;
- if (PORTNO(tty) == MXSER_PORTS)
- return (-ENOIOCTLCMD);
+
+ if (tty->index == MXSER_PORTS)
+ return -ENOIOCTLCMD;
if (tty->flags & (1 << TTY_IO_ERROR))
- return (-EIO);
+ return -EIO;
+
+ spin_lock_irqsave(&info->slock, flags);
- save_flags(flags);
- cli();
if (set & TIOCM_RTS)
info->MCR |= UART_MCR_RTS;
if (set & TIOCM_DTR)
info->MCR &= ~UART_MCR_DTR;
outb(info->MCR, info->base + UART_MCR);
- restore_flags(flags);
- return (0);
+ spin_unlock_irqrestore(&info->slock, flags);
+ return 0;
}
+
static int mxser_read_register(int, unsigned short *);
static int mxser_program_mode(int);
static void mxser_normal_mode(int);
unsigned short regs[16], irq;
unsigned char scratch, scratch2;
+ hwconf->IsMoxaMustChipFlag = MOXA_OTHER_UART;
+
id = mxser_read_register(cap, regs);
- if (id == C168_ASIC_ID)
+ if (id == C168_ASIC_ID) {
hwconf->board_type = MXSER_BOARD_C168_ISA;
- else if (id == C104_ASIC_ID)
+ hwconf->ports = 8;
+ } else if (id == C104_ASIC_ID) {
hwconf->board_type = MXSER_BOARD_C104_ISA;
- else if (id == C102_ASIC_ID)
+ hwconf->ports = 4;
+ } else if (id == C102_ASIC_ID) {
hwconf->board_type = MXSER_BOARD_C102_ISA;
- else if (id == CI132_ASIC_ID)
+ hwconf->ports = 2;
+ } else if (id == CI132_ASIC_ID) {
hwconf->board_type = MXSER_BOARD_CI132;
- else if (id == CI134_ASIC_ID)
+ hwconf->ports = 2;
+ } else if (id == CI134_ASIC_ID) {
hwconf->board_type = MXSER_BOARD_CI134;
- else if (id == CI104J_ASIC_ID)
+ hwconf->ports = 4;
+ } else if (id == CI104J_ASIC_ID) {
hwconf->board_type = MXSER_BOARD_CI104J;
- else
+ hwconf->ports = 4;
+ } else
return (0);
- irq = regs[9] & 0x0F;
- irq = irq | (irq << 4);
- irq = irq | (irq << 8);
- if ((irq != regs[9]) || ((id == 1) && (irq != regs[10]))) {
- return (MXSER_ERR_IRQ_CONFLIT);
+
+ irq = 0;
+ if (hwconf->ports == 2) {
+ irq = regs[9] & 0xF000;
+ irq = irq | (irq >> 4);
+ if (irq != (regs[9] & 0xFF00))
+ return (MXSER_ERR_IRQ_CONFLIT);
+ } else if (hwconf->ports == 4) {
+ irq = regs[9] & 0xF000;
+ irq = irq | (irq >> 4);
+ irq = irq | (irq >> 8);
+ if (irq != regs[9])
+ return (MXSER_ERR_IRQ_CONFLIT);
+ } else if (hwconf->ports == 8) {
+ irq = regs[9] & 0xF000;
+ irq = irq | (irq >> 4);
+ irq = irq | (irq >> 8);
+ if ((irq != regs[9]) || (irq != regs[10]))
+ return (MXSER_ERR_IRQ_CONFLIT);
}
+
if (!irq) {
return (MXSER_ERR_IRQ);
}
+ hwconf->irq = ((int) (irq & 0xF000) >> 12);
for (i = 0; i < 8; i++)
hwconf->ioaddr[i] = (int) regs[i + 1] & 0xFFF8;
- hwconf->irq = (int) (irq & 0x0F);
if ((regs[12] & 0x80) == 0) {
return (MXSER_ERR_VECTOR);
}
else
hwconf->vector_mask = 0x000F;
for (i = 7, bits = 0x0100; i >= 0; i--, bits <<= 1) {
- if (regs[12] & bits)
+ if (regs[12] & bits) {
hwconf->baud_base[i] = 921600;
- else
+ hwconf->MaxCanSetBaudRate[i] = 921600; // add by Victor Yu. 09-04-2002
+ } else {
hwconf->baud_base[i] = 115200;
+ hwconf->MaxCanSetBaudRate[i] = 115200; // add by Victor Yu. 09-04-2002
+ }
}
scratch2 = inb(cap + UART_LCR) & (~UART_LCR_DLAB);
outb(scratch2 | UART_LCR_DLAB, cap + UART_LCR);
outb(scratch2, cap + UART_LCR);
outb(UART_FCR_ENABLE_FIFO, cap + UART_FCR);
scratch = inb(cap + UART_IIR);
+
if (scratch & 0xC0)
hwconf->uart_type = PORT_16550A;
else
hwconf->ports = 8;
else
hwconf->ports = 4;
+ request_region(hwconf->ioaddr[0], 8 * hwconf->ports, "mxser(IO)");
+ request_region(hwconf->vector, 1, "mxser(vector)");
return (hwconf->ports);
}
static int mxser_program_mode(int port)
{
int id, i, j, n;
- unsigned long flags;
+ //unsigned long flags;
- save_flags(flags);
- cli();
+ spin_lock(&gm_lock);
outb(0, port);
outb(0, port);
outb(0, port);
(void) inb(port);
outb(0, port);
(void) inb(port);
- restore_flags(flags);
+ //restore_flags(flags);
+ spin_unlock(&gm_lock);
+
id = inb(port + 1) & 0x1F;
- if ((id != C168_ASIC_ID) && (id != C104_ASIC_ID) && (id != CI104J_ASIC_ID) &&
- (id != C102_ASIC_ID) && (id != CI132_ASIC_ID) && (id != CI134_ASIC_ID))
+ if ((id != C168_ASIC_ID) && (id != C104_ASIC_ID) && (id != C102_ASIC_ID) && (id != CI132_ASIC_ID) && (id != CI134_ASIC_ID) && (id != CI104J_ASIC_ID))
return (-1);
for (i = 0, j = 0; i < 4; i++) {
n = inb(port + 2);
outb(0x00, port + 4);
}
+// added by James 03-05-2004.
+// for secure device server:
+// stat = 1, the port8 DTR is set to ON.
+// stat = 0, the port8 DTR is set to OFF.
+void SDS_PORT8_DTR(int stat)
+{
+ int _sds_oldmcr;
+ _sds_oldmcr = inb(mxvar_table[7].base + UART_MCR); // get old MCR
+ if (stat == 1) {
+ outb(_sds_oldmcr | 0x01, mxvar_table[7].base + UART_MCR); // set DTR ON
+ }
+ if (stat == 0) {
+ outb(_sds_oldmcr & 0xfe, mxvar_table[7].base + UART_MCR); // set DTR OFF
+ }
+ return;
+}
+
module_init(mxser_module_init);
module_exit(mxser_module_exit);
git://git.onelab.eu / linux-2.6.git / blobdiff