#include <linux/pci.h>
#include <asm/uaccess.h>
#include <asm/atomic.h>
-#include <asm/bitops.h>
+#include <linux/bitops.h>
#include <linux/spinlock.h>
#include <asm/semaphore.h>
#include <linux/init.h>
static unsigned long board3;
static unsigned long board4;
static unsigned long controller;
-static unsigned long support_low_speed;
+static int support_low_speed;
static unsigned long modem1;
static unsigned long modem2;
static unsigned long modem3;
#ifdef MODULE
MODULE_AUTHOR("Theodore Ts'o");
MODULE_DESCRIPTION("Comtrol RocketPort driver");
-MODULE_PARM(board1, "i");
+module_param(board1, ulong, 0);
MODULE_PARM_DESC(board1, "I/O port for (ISA) board #1");
-MODULE_PARM(board2, "i");
+module_param(board2, ulong, 0);
MODULE_PARM_DESC(board2, "I/O port for (ISA) board #2");
-MODULE_PARM(board3, "i");
+module_param(board3, ulong, 0);
MODULE_PARM_DESC(board3, "I/O port for (ISA) board #3");
-MODULE_PARM(board4, "i");
+module_param(board4, ulong, 0);
MODULE_PARM_DESC(board4, "I/O port for (ISA) board #4");
-MODULE_PARM(controller, "i");
+module_param(controller, ulong, 0);
MODULE_PARM_DESC(controller, "I/O port for (ISA) rocketport controller");
-MODULE_PARM(support_low_speed, "i");
+module_param(support_low_speed, bool, 0);
MODULE_PARM_DESC(support_low_speed, "1 means support 50 baud, 0 means support 460400 baud");
-MODULE_PARM(modem1, "i");
+module_param(modem1, ulong, 0);
MODULE_PARM_DESC(modem1, "1 means (ISA) board #1 is a RocketModem");
-MODULE_PARM(modem2, "i");
+module_param(modem2, ulong, 0);
MODULE_PARM_DESC(modem2, "1 means (ISA) board #2 is a RocketModem");
-MODULE_PARM(modem3, "i");
+module_param(modem3, ulong, 0);
MODULE_PARM_DESC(modem3, "1 means (ISA) board #3 is a RocketModem");
-MODULE_PARM(modem4, "i");
+module_param(modem4, ulong, 0);
MODULE_PARM_DESC(modem4, "1 means (ISA) board #4 is a RocketModem");
-MODULE_PARM(pc104_1, "1-8i");
+module_param_array(pc104_1, ulong, NULL, 0);
MODULE_PARM_DESC(pc104_1, "set interface types for ISA(PC104) board #1 (e.g. pc104_1=232,232,485,485,...");
-MODULE_PARM(pc104_2, "1-8i");
+module_param_array(pc104_2, ulong, NULL, 0);
MODULE_PARM_DESC(pc104_2, "set interface types for ISA(PC104) board #2 (e.g. pc104_2=232,232,485,485,...");
-MODULE_PARM(pc104_3, "1-8i");
+module_param_array(pc104_3, ulong, NULL, 0);
MODULE_PARM_DESC(pc104_3, "set interface types for ISA(PC104) board #3 (e.g. pc104_3=232,232,485,485,...");
-MODULE_PARM(pc104_4, "1-8i");
+module_param_array(pc104_4, ulong, NULL, 0);
MODULE_PARM_DESC(pc104_4, "set interface types for ISA(PC104) board #4 (e.g. pc104_4=232,232,485,485,...");
int rp_init(void);
if (info->blocked_open) {
if (info->close_delay) {
- current->state = TASK_INTERRUPTIBLE;
- schedule_timeout(info->close_delay);
+ msleep_interruptible(jiffies_to_msecs(info->close_delay));
}
wake_up_interruptible(&info->open_wait);
} else {
#ifdef ROCKET_DEBUG_WAIT_UNTIL_SENT
printk(KERN_INFO "txcnt = %d (jiff=%lu,check=%d)...", txcnt, jiffies, check_time);
#endif
- current->state = TASK_INTERRUPTIBLE;
- schedule_timeout(check_time);
+ msleep_interruptible(jiffies_to_msecs(check_time));
if (signal_pending(current))
break;
}
* or get control of the CPU if the copy_from_user() blocks due to a page fault (swapped out).
* Spinlocks protect the info xmit members.
*/
-static int rp_write(struct tty_struct *tty, int from_user,
+static int rp_write(struct tty_struct *tty,
const unsigned char *buf, int count)
{
struct r_port *info = (struct r_port *) tty->driver_data;
if (!tty->stopped && !tty->hw_stopped && info->xmit_cnt == 0 && info->xmit_fifo_room > 0) {
c = min(count, info->xmit_fifo_room);
b = buf;
- if (from_user) {
- if (copy_from_user(info->xmit_buf, buf, c)) {
- retval = -EFAULT;
- goto end;
- }
- if (info->tty == 0)
- goto end;
- b = info->xmit_buf;
- c = min(c, info->xmit_fifo_room);
- }
/* Push data into FIFO, 2 bytes at a time */
sOutStrW(sGetTxRxDataIO(cp), (unsigned short *) b, c / 2);
break;
b = buf;
- if (from_user) {
- if (copy_from_user(info->xmit_buf + info->xmit_head, b, c)) {
- retval = -EFAULT;
- goto end_intr;
- } else {
- memcpy(info->xmit_buf + info->xmit_head, b, c);
- }
- }
+ memcpy(info->xmit_buf + info->xmit_head, b, c);
spin_lock_irqsave(&info->slock, flags);
info->xmit_head =
retval += c;
}
-end_intr:
if ((retval > 0) && !tty->stopped && !tty->hw_stopped)
set_bit((info->aiop * 8) + info->chan, (void *) &xmit_flags[info->board]);
}
#endif
-/***********************************************************************
- Copyright 1994 Comtrol Corporation.
- All Rights Reserved.
-
-The following source code is subject to Comtrol Corporation's
-Developer's License Agreement.
-
-This source code is protected by United States copyright law and
-international copyright treaties.
-
-This source code may only be used to develop software products that
-will operate with Comtrol brand hardware.
-
-You may not reproduce nor distribute this source code in its original
-form but must produce a derivative work which includes portions of
-this source code only.
-
-The portions of this source code which you use in your derivative
-work must bear Comtrol's copyright notice:
-
- Copyright 1994 Comtrol Corporation.
-
-***********************************************************************/
-
#ifndef TRUE
#define TRUE 1
#endif
git://git.onelab.eu / linux-2.6.git / blobdiff