* - replace bottom half handler with task queue handler
*/
-#include <linux/config.h>
#include <linux/errno.h>
#include <linux/signal.h>
#include <linux/sched.h>
#include <linux/console.h>
#include <linux/module.h>
#include <linux/bitops.h>
+#include <linux/tty_flip.h>
#include <asm/system.h>
#include <asm/io.h>
};
#define NR_PORTS ARRAY_SIZE(cy_port)
-/*
- * tmp_buf is used as a temporary buffer by serial_write. We need to
- * lock it in case the copy_from_user blocks while swapping in a page,
- * and some other program tries to do a serial write at the same time.
- * Since the lock will only come under contention when the system is
- * swapping and available memory is low, it makes sense to share one
- * buffer across all the serial ports, since it significantly saves
- * memory if large numbers of serial ports are open.
- */
-static unsigned char *tmp_buf = 0;
-
/*
* This is used to look up the divisor speeds and the timeouts
* We're normally limited to 15 distinct baud rates. The extra
received, out buffer empty, modem change, etc.
*/
static irqreturn_t
-cd2401_rxerr_interrupt(int irq, void *dev_id, struct pt_regs *fp)
+cd2401_rxerr_interrupt(int irq, void *dev_id)
{
struct tty_struct *tty;
struct cyclades_port *info;
overflowing, we still loose
the next incoming character.
*/
- tty_insert_flip_char(tty, data, TTY_NORMAL);
- }
+ if (tty_buffer_request_room(tty, 1) != 0){
+ tty_insert_flip_char(tty, data, TTY_FRAME);
+ }
/* These two conditions may imply */
/* a normal read should be done. */
/* else if(data & CyTIMEOUT) */
tty_insert_flip_char(tty, 0, TTY_NORMAL);
}
}else{
- tty_insert_flip_char(tty, data, TTY_NORMAL);
+ tty_insert_flip_char(tty, data, TTY_NORMAL);
}
}else{
/* there was a software buffer overrun
and nothing could be done about it!!! */
}
}
- schedule_delayed_work(&tty->flip.work, 1);
+ tty_schedule_flip(tty);
/* end of service */
base_addr[CyREOIR] = rfoc ? 0 : CyNOTRANS;
return IRQ_HANDLED;
} /* cy_rxerr_interrupt */
static irqreturn_t
-cd2401_modem_interrupt(int irq, void *dev_id, struct pt_regs *fp)
+cd2401_modem_interrupt(int irq, void *dev_id)
{
struct cyclades_port *info;
volatile unsigned char *base_addr = (unsigned char *)BASE_ADDR;
} /* cy_modem_interrupt */
static irqreturn_t
-cd2401_tx_interrupt(int irq, void *dev_id, struct pt_regs *fp)
+cd2401_tx_interrupt(int irq, void *dev_id)
{
struct cyclades_port *info;
volatile unsigned char *base_addr = (unsigned char *)BASE_ADDR;
} /* cy_tx_interrupt */
static irqreturn_t
-cd2401_rx_interrupt(int irq, void *dev_id, struct pt_regs *fp)
+cd2401_rx_interrupt(int irq, void *dev_id)
{
struct tty_struct *tty;
struct cyclades_port *info;
char data;
int char_count;
int save_cnt;
+ int len;
/* determine the channel and change to that context */
channel = (u_short ) (base_addr[CyLICR] >> 2);
info->mon.char_max = char_count;
info->mon.char_last = char_count;
#endif
- while(char_count--){
+ len = tty_buffer_request_room(tty, char_count);
+ while(len--){
data = base_addr[CyRDR];
tty_insert_flip_char(tty, data, TTY_NORMAL);
#ifdef CYCLOM_16Y_HACK
udelay(10L);
#endif
}
- schedule_delayed_work(&tty->flip.work, 1);
+ tty_schedule_flip(tty);
}
/* end of service */
base_addr[CyREOIR] = save_cnt ? 0 : CyNOTRANS;
* had to poll every port to see if that port needed servicing.
*/
static void
-do_softint(void *private_)
+do_softint(struct work_struct *ugly_api)
{
- struct cyclades_port *info = (struct cyclades_port *) private_;
+ struct cyclades_port *info = container_of(ugly_api, struct cyclades_port, tqueue);
struct tty_struct *tty;
tty = info->tty;
local_irq_save(flags);
if (info->xmit_buf){
free_page((unsigned long) info->xmit_buf);
- info->xmit_buf = 0;
+ info->xmit_buf = NULL;
}
base_addr[CyCAR] = (u_char)channel;
if (serial_paranoia_check(info, tty->name, "cy_put_char"))
return;
- if (!tty || !info->xmit_buf)
+ if (!info->xmit_buf)
return;
local_irq_save(flags);
return 0;
}
- if (!tty || !info->xmit_buf || !tmp_buf){
+ if (!info->xmit_buf){
return 0;
}
static int
get_serial_info(struct cyclades_port * info,
- struct serial_struct * retinfo)
+ struct serial_struct __user * retinfo)
{
struct serial_struct tmp;
static int
set_serial_info(struct cyclades_port * info,
- struct serial_struct * new_info)
+ struct serial_struct __user * new_info)
{
struct serial_struct new_serial;
struct cyclades_port old_info;
volatile unsigned char *base_addr = (u_char *)BASE_ADDR;
unsigned long flags;
unsigned char status;
- unsigned int result;
channel = info->line;
int channel;
volatile unsigned char *base_addr = (u_char *)BASE_ADDR;
unsigned long flags;
- unsigned int arg;
channel = info->line;
} /* send_break */
static int
-get_mon_info(struct cyclades_port * info, struct cyclades_monitor * mon)
+get_mon_info(struct cyclades_port * info, struct cyclades_monitor __user * mon)
{
if (copy_to_user(mon, &info->mon, sizeof(struct cyclades_monitor)))
}
static int
-set_threshold(struct cyclades_port * info, unsigned long *arg)
+set_threshold(struct cyclades_port * info, unsigned long __user *arg)
{
volatile unsigned char *base_addr = (u_char *)BASE_ADDR;
unsigned long value;
}
static int
-get_threshold(struct cyclades_port * info, unsigned long *value)
+get_threshold(struct cyclades_port * info, unsigned long __user *value)
{
volatile unsigned char *base_addr = (u_char *)BASE_ADDR;
int channel;
}
static int
-set_default_threshold(struct cyclades_port * info, unsigned long *arg)
+set_default_threshold(struct cyclades_port * info, unsigned long __user *arg)
{
unsigned long value;
}
static int
-get_default_threshold(struct cyclades_port * info, unsigned long *value)
+get_default_threshold(struct cyclades_port * info, unsigned long __user *value)
{
return put_user(info->default_threshold,value);
}
static int
-set_timeout(struct cyclades_port * info, unsigned long *arg)
+set_timeout(struct cyclades_port * info, unsigned long __user *arg)
{
volatile unsigned char *base_addr = (u_char *)BASE_ADDR;
int channel;
}
static int
-get_timeout(struct cyclades_port * info, unsigned long *value)
+get_timeout(struct cyclades_port * info, unsigned long __user *value)
{
volatile unsigned char *base_addr = (u_char *)BASE_ADDR;
int channel;
}
static int
-get_default_timeout(struct cyclades_port * info, unsigned long *value)
+get_default_timeout(struct cyclades_port * info, unsigned long __user *value)
{
return put_user(info->default_timeout,value);
}
unsigned long val;
struct cyclades_port * info = (struct cyclades_port *)tty->driver_data;
int ret_val = 0;
+ void __user *argp = (void __user *)arg;
#ifdef SERIAL_DEBUG_OTHER
printk("cy_ioctl %s, cmd = %x arg = %lx\n", tty->name, cmd, arg); /* */
switch (cmd) {
case CYGETMON:
- ret_val = get_mon_info(info, (struct cyclades_monitor *)arg);
+ ret_val = get_mon_info(info, argp);
break;
case CYGETTHRESH:
- ret_val = get_threshold(info, (unsigned long *)arg);
+ ret_val = get_threshold(info, argp);
break;
case CYSETTHRESH:
- ret_val = set_threshold(info, (unsigned long *)arg);
+ ret_val = set_threshold(info, argp);
break;
case CYGETDEFTHRESH:
- ret_val = get_default_threshold(info, (unsigned long *)arg);
+ ret_val = get_default_threshold(info, argp);
break;
case CYSETDEFTHRESH:
- ret_val = set_default_threshold(info, (unsigned long *)arg);
+ ret_val = set_default_threshold(info, argp);
break;
case CYGETTIMEOUT:
- ret_val = get_timeout(info, (unsigned long *)arg);
+ ret_val = get_timeout(info, argp);
break;
case CYSETTIMEOUT:
- ret_val = set_timeout(info, (unsigned long *)arg);
+ ret_val = set_timeout(info, argp);
break;
case CYGETDEFTIMEOUT:
- ret_val = get_default_timeout(info, (unsigned long *)arg);
+ ret_val = get_default_timeout(info, argp);
break;
case CYSETDEFTIMEOUT:
ret_val = set_default_timeout(info, (unsigned long)arg);
/* The following commands are incompletely implemented!!! */
case TIOCGSOFTCAR:
- ret_val = put_user(C_CLOCAL(tty) ? 1 : 0, (unsigned long *) arg);
+ ret_val = put_user(C_CLOCAL(tty) ? 1 : 0, (unsigned long __user *) argp);
break;
case TIOCSSOFTCAR:
- ret_val = get_user(val, (unsigned long *) arg);
+ ret_val = get_user(val, (unsigned long __user *) argp);
if (ret_val)
break;
tty->termios->c_cflag =
((tty->termios->c_cflag & ~CLOCAL) | (val ? CLOCAL : 0));
break;
case TIOCGSERIAL:
- ret_val = get_serial_info(info, (struct serial_struct *) arg);
+ ret_val = get_serial_info(info, argp);
break;
case TIOCSSERIAL:
- ret_val = set_serial_info(info,
- (struct serial_struct *) arg);
+ ret_val = set_serial_info(info, argp);
break;
default:
ret_val = -ENOIOCTLCMD;
static void
-cy_set_termios(struct tty_struct *tty, struct termios * old_termios)
+cy_set_termios(struct tty_struct *tty, struct ktermios * old_termios)
{
struct cyclades_port *info = (struct cyclades_port *)tty->driver_data;
tty->driver->flush_buffer(tty);
tty_ldisc_flush(tty);
info->event = 0;
- info->tty = 0;
+ info->tty = NULL;
if (info->blocked_open) {
if (info->close_delay) {
msleep_interruptible(jiffies_to_msecs(info->close_delay));
tty->driver_data = info;
info->tty = tty;
- if (!tmp_buf) {
- tmp_buf = (unsigned char *) get_zeroed_page(GFP_KERNEL);
- if (!tmp_buf){
- return -ENOMEM;
- }
- }
-
/*
* Start up serial port
*/
rcor >> 5, rbpr);
} /* serial_console_init */
-static struct tty_operations cy_ops = {
+static const struct tty_operations cy_ops = {
.open = cy_open,
.close = cy_close,
.write = cy_write,
/* Initialize the tty_driver structure */
cy_serial_driver->owner = THIS_MODULE;
- cy_serial_driver->devfs_name = "tts/";
cy_serial_driver->name = "ttyS";
cy_serial_driver->major = TTY_MAJOR;
cy_serial_driver->minor_start = 64;
info->card = index;
info->line = port_num;
info->flags = STD_COM_FLAGS;
- info->tty = 0;
+ info->tty = NULL;
info->xmit_fifo_size = 12;
info->cor1 = CyPARITY_NONE|Cy_8_BITS;
info->cor2 = CyETC;
info->blocked_open = 0;
info->default_threshold = 0;
info->default_timeout = 0;
- INIT_WORK(&info->tqueue, do_softint, info);
+ INIT_WORK(&info->tqueue, do_softint);
init_waitqueue_head(&info->open_wait);
init_waitqueue_head(&info->close_wait);
/* info->session */
git://git.onelab.eu / linux-2.6.git / blobdiff