//#define DBGRBUF(info) dump_rbufs(info)
-#include <linux/config.h>
#include <linux/module.h>
#include <linux/version.h>
#include <linux/errno.h>
static struct pci_device_id pci_table[] = {
{PCI_VENDOR_ID_MICROGATE, SYNCLINK_GT_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID,},
+ {PCI_VENDOR_ID_MICROGATE, SYNCLINK_GT2_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID,},
{PCI_VENDOR_ID_MICROGATE, SYNCLINK_GT4_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID,},
{PCI_VENDOR_ID_MICROGATE, SYNCLINK_AC_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID,},
{0,}, /* terminate list */
#define DESC_LIST_SIZE 4096
#define MASK_PARITY BIT1
-#define MASK_FRAMING BIT2
-#define MASK_BREAK BIT3
+#define MASK_FRAMING BIT0
+#define MASK_BREAK BIT14
#define MASK_OVERRUN BIT4
#define GSR 0x00 /* global status */
goto cleanup;
DBGINFO(("%s write count=%d\n", info->device_name, count));
- if (!tty || !info->tx_buf)
+ if (!info->tx_buf)
goto cleanup;
if (count > info->max_frame_size) {
if (sanity_check(info, tty->name, "put_char"))
return;
DBGINFO(("%s put_char(%d)\n", info->device_name, ch));
- if (!tty || !info->tx_buf)
+ if (!info->tx_buf)
return;
spin_lock_irqsave(&info->lock,flags);
if (!info->tx_active && (info->tx_count < info->max_frame_size))
spin_lock_irqsave(&info->lock, flags);
get_signals(info);
spin_unlock_irqrestore(&info->lock, flags);
- hdlc_set_carrier(info->signals & SerialSignal_DCD, dev);
-
+ if (info->signals & SerialSignal_DCD)
+ netif_carrier_on(dev);
+ else
+ netif_carrier_off(dev);
return 0;
}
stat = 0;
- if ((status = *(p+1) & (BIT9 + BIT8))) {
- if (status & BIT9)
+ if ((status = *(p+1) & (BIT1 + BIT0))) {
+ if (status & BIT1)
icount->parity++;
- else if (status & BIT8)
+ else if (status & BIT0)
icount->frame++;
/* discard char if tty control flags say so */
if (status & info->ignore_status_mask)
continue;
- if (status & BIT9)
+ if (status & BIT1)
stat = TTY_PARITY;
- else if (status & BIT8)
+ else if (status & BIT0)
stat = TTY_FRAME;
}
if (tty) {
info->input_signal_events.dcd_down++;
}
#ifdef CONFIG_HDLC
- if (info->netcount)
- hdlc_set_carrier(info->signals & SerialSignal_DCD, info->netdev);
+ if (info->netcount) {
+ if (info->signals & SerialSignal_DCD)
+ netif_carrier_on(info->netdev);
+ else
+ netif_carrier_off(info->netdev);
+ }
#endif
wake_up_interruptible(&info->status_event_wait_q);
wake_up_interruptible(&info->event_wait_q);
DBGINFO(("%s set_txidle(%d)\n", info->device_name, idle_mode));
spin_lock_irqsave(&info->lock,flags);
info->idle_mode = idle_mode;
- tx_set_idle(info);
+ if (info->params.mode != MGSL_MODE_ASYNC)
+ tx_set_idle(info);
spin_unlock_irqrestore(&info->lock,flags);
return 0;
}
static int alloc_tmp_rbuf(struct slgt_info *info)
{
- info->tmp_rbuf = kmalloc(info->max_frame_size, GFP_KERNEL);
+ info->tmp_rbuf = kmalloc(info->max_frame_size + 5, GFP_KERNEL);
if (info->tmp_rbuf == NULL)
return -ENOMEM;
return 0;
case SYNCLINK_GT_DEVICE_ID:
devstr = "GT";
break;
+ case SYNCLINK_GT2_DEVICE_ID:
+ devstr = "GT2";
+ break;
case SYNCLINK_GT4_DEVICE_ID:
devstr = "GT4";
break;
info->phys_reg_addr = pci_resource_start(pdev,0);
info->bus_type = MGSL_BUS_TYPE_PCI;
- info->irq_flags = SA_SHIRQ;
+ info->irq_flags = IRQF_SHARED;
info->init_error = -1; /* assume error, set to 0 on successful init */
}
int i;
int port_count = 1;
- if (pdev->device == SYNCLINK_GT4_DEVICE_ID)
+ if (pdev->device == SYNCLINK_GT2_DEVICE_ID)
+ port_count = 2;
+ else if (pdev->device == SYNCLINK_GT4_DEVICE_ID)
port_count = 4;
/* allocate device instances for all ports */
msc_set_vcr(info);
- tx_set_idle(info);
-
/* SCR (serial control)
*
* 15 1=tx req on FIFO half empty
case HDLC_ENCODING_DIFF_BIPHASE_LEVEL: val |= BIT12 + BIT11 + BIT10; break;
}
- switch (info->params.crc_type)
+ switch (info->params.crc_type & HDLC_CRC_MASK)
{
case HDLC_CRC_16_CCITT: val |= BIT9; break;
case HDLC_CRC_32_CCITT: val |= BIT9 + BIT8; break;
case HDLC_ENCODING_DIFF_BIPHASE_LEVEL: val |= BIT12 + BIT11 + BIT10; break;
}
- switch (info->params.crc_type)
+ switch (info->params.crc_type & HDLC_CRC_MASK)
{
case HDLC_CRC_16_CCITT: val |= BIT9; break;
case HDLC_CRC_32_CCITT: val |= BIT9 + BIT8; break;
*/
static void tx_set_idle(struct slgt_info *info)
{
- unsigned char val = 0xff;
+ unsigned char val;
+ unsigned short tcr;
- switch(info->idle_mode)
- {
- case HDLC_TXIDLE_FLAGS: val = 0x7e; break;
- case HDLC_TXIDLE_ALT_ZEROS_ONES: val = 0xaa; break;
- case HDLC_TXIDLE_ZEROS: val = 0x00; break;
- case HDLC_TXIDLE_ONES: val = 0xff; break;
- case HDLC_TXIDLE_ALT_MARK_SPACE: val = 0xaa; break;
- case HDLC_TXIDLE_SPACE: val = 0x00; break;
- case HDLC_TXIDLE_MARK: val = 0xff; break;
+ /* if preamble enabled (tcr[6] == 1) then tx idle size = 8 bits
+ * else tcr[5:4] = tx idle size: 00 = 8 bits, 01 = 16 bits
+ */
+ tcr = rd_reg16(info, TCR);
+ if (info->idle_mode & HDLC_TXIDLE_CUSTOM_16) {
+ /* disable preamble, set idle size to 16 bits */
+ tcr = (tcr & ~(BIT6 + BIT5)) | BIT4;
+ /* MSB of 16 bit idle specified in tx preamble register (TPR) */
+ wr_reg8(info, TPR, (unsigned char)((info->idle_mode >> 8) & 0xff));
+ } else if (!(tcr & BIT6)) {
+ /* preamble is disabled, set idle size to 8 bits */
+ tcr &= ~(BIT5 + BIT4);
+ }
+ wr_reg16(info, TCR, tcr);
+
+ if (info->idle_mode & (HDLC_TXIDLE_CUSTOM_8 | HDLC_TXIDLE_CUSTOM_16)) {
+ /* LSB of custom tx idle specified in tx idle register */
+ val = (unsigned char)(info->idle_mode & 0xff);
+ } else {
+ /* standard 8 bit idle patterns */
+ switch(info->idle_mode)
+ {
+ case HDLC_TXIDLE_FLAGS: val = 0x7e; break;
+ case HDLC_TXIDLE_ALT_ZEROS_ONES:
+ case HDLC_TXIDLE_ALT_MARK_SPACE: val = 0xaa; break;
+ case HDLC_TXIDLE_ZEROS:
+ case HDLC_TXIDLE_SPACE: val = 0x00; break;
+ default: val = 0xff;
+ }
}
wr_reg8(info, TIR, val);
unsigned long flags;
struct tty_struct *tty = info->tty;
unsigned char addr_field = 0xff;
+ unsigned int crc_size = 0;
+
+ switch (info->params.crc_type & HDLC_CRC_MASK) {
+ case HDLC_CRC_16_CCITT: crc_size = 2; break;
+ case HDLC_CRC_32_CCITT: crc_size = 4; break;
+ }
check_again:
status = desc_status(info->rbufs[end]);
/* ignore CRC bit if not using CRC (bit is undefined) */
- if (info->params.crc_type == HDLC_CRC_NONE)
+ if ((info->params.crc_type & HDLC_CRC_MASK) == HDLC_CRC_NONE)
status &= ~BIT1;
if (framesize == 0 ||
goto check_again;
}
- if (framesize < 2 || status & (BIT1+BIT0)) {
- if (framesize < 2 || (status & BIT0))
- info->icount.rxshort++;
- else
- info->icount.rxcrc++;
+ if (framesize < (2 + crc_size) || status & BIT0) {
+ info->icount.rxshort++;
framesize = 0;
+ } else if (status & BIT1) {
+ info->icount.rxcrc++;
+ if (!(info->params.crc_type & HDLC_CRC_RETURN_EX))
+ framesize = 0;
+ }
#ifdef CONFIG_HDLC
- {
- struct net_device_stats *stats = hdlc_stats(info->netdev);
- stats->rx_errors++;
- stats->rx_frame_errors++;
- }
-#endif
- } else {
- /* adjust frame size for CRC, if any */
- if (info->params.crc_type == HDLC_CRC_16_CCITT)
- framesize -= 2;
- else if (info->params.crc_type == HDLC_CRC_32_CCITT)
- framesize -= 4;
+ if (framesize == 0) {
+ struct net_device_stats *stats = hdlc_stats(info->netdev);
+ stats->rx_errors++;
+ stats->rx_frame_errors++;
}
+#endif
DBGBH(("%s rx frame status=%04X size=%d\n",
info->device_name, status, framesize));
DBGDATA(info, info->rbufs[start].buf, min_t(int, framesize, DMABUFSIZE), "rx");
if (framesize) {
- if (framesize > info->max_frame_size)
+ if (!(info->params.crc_type & HDLC_CRC_RETURN_EX)) {
+ framesize -= crc_size;
+ crc_size = 0;
+ }
+
+ if (framesize > info->max_frame_size + crc_size)
info->icount.rxlong++;
else {
/* copy dma buffer(s) to contiguous temp buffer */
i = 0;
}
+ if (info->params.crc_type & HDLC_CRC_RETURN_EX) {
+ *p = (status & BIT1) ? RX_CRC_ERROR : RX_OK;
+ framesize++;
+ }
+
#ifdef CONFIG_HDLC
if (info->netcount)
hdlcdev_rx(info,info->tmp_rbuf, framesize);
static int adapter_test(struct slgt_info *info)
{
DBGINFO(("testing %s\n", info->device_name));
- if ((info->init_error = register_test(info)) < 0) {
+ if (register_test(info) < 0) {
printk("register test failure %s addr=%08X\n",
info->device_name, info->phys_reg_addr);
- } else if ((info->init_error = irq_test(info)) < 0) {
+ } else if (irq_test(info) < 0) {
printk("IRQ test failure %s IRQ=%d\n",
info->device_name, info->irq_level);
- } else if ((info->init_error = loopback_test(info)) < 0) {
+ } else if (loopback_test(info) < 0) {
printk("loopback test failure %s\n", info->device_name);
}
return info->init_error;
git://git.onelab.eu / linux-2.6.git / blobdiff