w83792d 9 7 7 3 0x7a 0x5ca3 yes no
*/
+#include <linux/config.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/hwmon.h>
#include <linux/hwmon-sysfs.h>
#include <linux/err.h>
-#include <linux/mutex.h>
/* Addresses to scan */
static unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, 0x2f, I2C_CLIENT_END };
: (val)) / 1000, 0, 0xff))
#define TEMP_ADD_TO_REG_LOW(val) ((val%1000) ? 0x80 : 0x00)
+#define PWM_FROM_REG(val) (val)
+#define PWM_TO_REG(val) (SENSORS_LIMIT((val),0,255))
#define DIV_FROM_REG(val) (1 << (val))
static inline u8
struct class_device *class_dev;
enum chips type;
- struct mutex update_lock;
+ struct semaphore update_lock;
char valid; /* !=0 if following fields are valid */
unsigned long last_updated; /* In jiffies */
u8 pwm[7]; /* We only consider the first 3 set of pwm,
although 792 chip has 7 set of pwm. */
u8 pwmenable[3];
+ u8 pwm_mode[7]; /* indicates PWM or DC mode: 1->PWM; 0->DC */
u32 alarms; /* realtime status register encoding,combined */
u8 chassis; /* Chassis status */
u8 chassis_clear; /* CLR_CHS, clear chassis intrusion detection */
u32 val; \
\
val = simple_strtoul(buf, NULL, 10); \
- mutex_lock(&data->update_lock); \
data->in_##reg[nr] = SENSORS_LIMIT(IN_TO_REG(nr, val)/4, 0, 255); \
w83792d_write_value(client, W83792D_REG_IN_##REG[nr], data->in_##reg[nr]); \
- mutex_unlock(&data->update_lock); \
\
return count; \
}
store_in_reg(MIN, min);
store_in_reg(MAX, max);
-static struct sensor_device_attribute sda_in_input[] = {
- SENSOR_ATTR(in0_input, S_IRUGO, show_in, NULL, 0),
- SENSOR_ATTR(in1_input, S_IRUGO, show_in, NULL, 1),
- SENSOR_ATTR(in2_input, S_IRUGO, show_in, NULL, 2),
- SENSOR_ATTR(in3_input, S_IRUGO, show_in, NULL, 3),
- SENSOR_ATTR(in4_input, S_IRUGO, show_in, NULL, 4),
- SENSOR_ATTR(in5_input, S_IRUGO, show_in, NULL, 5),
- SENSOR_ATTR(in6_input, S_IRUGO, show_in, NULL, 6),
- SENSOR_ATTR(in7_input, S_IRUGO, show_in, NULL, 7),
- SENSOR_ATTR(in8_input, S_IRUGO, show_in, NULL, 8),
-};
-static struct sensor_device_attribute sda_in_min[] = {
- SENSOR_ATTR(in0_min, S_IWUSR | S_IRUGO, show_in_min, store_in_min, 0),
- SENSOR_ATTR(in1_min, S_IWUSR | S_IRUGO, show_in_min, store_in_min, 1),
- SENSOR_ATTR(in2_min, S_IWUSR | S_IRUGO, show_in_min, store_in_min, 2),
- SENSOR_ATTR(in3_min, S_IWUSR | S_IRUGO, show_in_min, store_in_min, 3),
- SENSOR_ATTR(in4_min, S_IWUSR | S_IRUGO, show_in_min, store_in_min, 4),
- SENSOR_ATTR(in5_min, S_IWUSR | S_IRUGO, show_in_min, store_in_min, 5),
- SENSOR_ATTR(in6_min, S_IWUSR | S_IRUGO, show_in_min, store_in_min, 6),
- SENSOR_ATTR(in7_min, S_IWUSR | S_IRUGO, show_in_min, store_in_min, 7),
- SENSOR_ATTR(in8_min, S_IWUSR | S_IRUGO, show_in_min, store_in_min, 8),
-};
-static struct sensor_device_attribute sda_in_max[] = {
- SENSOR_ATTR(in0_max, S_IWUSR | S_IRUGO, show_in_max, store_in_max, 0),
- SENSOR_ATTR(in1_max, S_IWUSR | S_IRUGO, show_in_max, store_in_max, 1),
- SENSOR_ATTR(in2_max, S_IWUSR | S_IRUGO, show_in_max, store_in_max, 2),
- SENSOR_ATTR(in3_max, S_IWUSR | S_IRUGO, show_in_max, store_in_max, 3),
- SENSOR_ATTR(in4_max, S_IWUSR | S_IRUGO, show_in_max, store_in_max, 4),
- SENSOR_ATTR(in5_max, S_IWUSR | S_IRUGO, show_in_max, store_in_max, 5),
- SENSOR_ATTR(in6_max, S_IWUSR | S_IRUGO, show_in_max, store_in_max, 6),
- SENSOR_ATTR(in7_max, S_IWUSR | S_IRUGO, show_in_max, store_in_max, 7),
- SENSOR_ATTR(in8_max, S_IWUSR | S_IRUGO, show_in_max, store_in_max, 8),
-};
-
+#define sysfs_in_reg(offset) \
+static SENSOR_DEVICE_ATTR(in##offset##_input, S_IRUGO, show_in, \
+ NULL, offset); \
+static SENSOR_DEVICE_ATTR(in##offset##_min, S_IRUGO | S_IWUSR, \
+ show_in_min, store_in_min, offset); \
+static SENSOR_DEVICE_ATTR(in##offset##_max, S_IRUGO | S_IWUSR, \
+ show_in_max, store_in_max, offset);
+
+sysfs_in_reg(0);
+sysfs_in_reg(1);
+sysfs_in_reg(2);
+sysfs_in_reg(3);
+sysfs_in_reg(4);
+sysfs_in_reg(5);
+sysfs_in_reg(6);
+sysfs_in_reg(7);
+sysfs_in_reg(8);
+
+#define device_create_file_in(client, offset) \
+do { \
+device_create_file(&client->dev, &sensor_dev_attr_in##offset##_input.dev_attr); \
+device_create_file(&client->dev, &sensor_dev_attr_in##offset##_max.dev_attr); \
+device_create_file(&client->dev, &sensor_dev_attr_in##offset##_min.dev_attr); \
+} while (0)
#define show_fan_reg(reg) \
static ssize_t show_##reg (struct device *dev, struct device_attribute *attr, \
u32 val;
val = simple_strtoul(buf, NULL, 10);
- mutex_lock(&data->update_lock);
data->fan_min[nr] = FAN_TO_REG(val, DIV_FROM_REG(data->fan_div[nr]));
w83792d_write_value(client, W83792D_REG_FAN_MIN[nr],
data->fan_min[nr]);
- mutex_unlock(&data->update_lock);
return count;
}
/* Note: we save and restore the fan minimum here, because its value is
determined in part by the fan divisor. This follows the principle of
- least surprise; the user doesn't expect the fan minimum to change just
+ least suprise; the user doesn't expect the fan minimum to change just
because the divisor changed. */
static ssize_t
store_fan_div(struct device *dev, struct device_attribute *attr,
u8 tmp_fan_div;
/* Save fan_min */
- mutex_lock(&data->update_lock);
min = FAN_FROM_REG(data->fan_min[nr],
DIV_FROM_REG(data->fan_div[nr]));
/* Restore fan_min */
data->fan_min[nr] = FAN_TO_REG(min, DIV_FROM_REG(data->fan_div[nr]));
w83792d_write_value(client, W83792D_REG_FAN_MIN[nr], data->fan_min[nr]);
- mutex_unlock(&data->update_lock);
return count;
}
-static struct sensor_device_attribute sda_fan_input[] = {
- SENSOR_ATTR(fan1_input, S_IRUGO, show_fan, NULL, 1),
- SENSOR_ATTR(fan2_input, S_IRUGO, show_fan, NULL, 2),
- SENSOR_ATTR(fan3_input, S_IRUGO, show_fan, NULL, 3),
- SENSOR_ATTR(fan4_input, S_IRUGO, show_fan, NULL, 4),
- SENSOR_ATTR(fan5_input, S_IRUGO, show_fan, NULL, 5),
- SENSOR_ATTR(fan6_input, S_IRUGO, show_fan, NULL, 6),
- SENSOR_ATTR(fan7_input, S_IRUGO, show_fan, NULL, 7),
-};
-static struct sensor_device_attribute sda_fan_min[] = {
- SENSOR_ATTR(fan1_min, S_IWUSR | S_IRUGO, show_fan_min, store_fan_min, 1),
- SENSOR_ATTR(fan2_min, S_IWUSR | S_IRUGO, show_fan_min, store_fan_min, 2),
- SENSOR_ATTR(fan3_min, S_IWUSR | S_IRUGO, show_fan_min, store_fan_min, 3),
- SENSOR_ATTR(fan4_min, S_IWUSR | S_IRUGO, show_fan_min, store_fan_min, 4),
- SENSOR_ATTR(fan5_min, S_IWUSR | S_IRUGO, show_fan_min, store_fan_min, 5),
- SENSOR_ATTR(fan6_min, S_IWUSR | S_IRUGO, show_fan_min, store_fan_min, 6),
- SENSOR_ATTR(fan7_min, S_IWUSR | S_IRUGO, show_fan_min, store_fan_min, 7),
-};
-static struct sensor_device_attribute sda_fan_div[] = {
- SENSOR_ATTR(fan1_div, S_IWUSR | S_IRUGO, show_fan_div, store_fan_div, 1),
- SENSOR_ATTR(fan2_div, S_IWUSR | S_IRUGO, show_fan_div, store_fan_div, 2),
- SENSOR_ATTR(fan3_div, S_IWUSR | S_IRUGO, show_fan_div, store_fan_div, 3),
- SENSOR_ATTR(fan4_div, S_IWUSR | S_IRUGO, show_fan_div, store_fan_div, 4),
- SENSOR_ATTR(fan5_div, S_IWUSR | S_IRUGO, show_fan_div, store_fan_div, 5),
- SENSOR_ATTR(fan6_div, S_IWUSR | S_IRUGO, show_fan_div, store_fan_div, 6),
- SENSOR_ATTR(fan7_div, S_IWUSR | S_IRUGO, show_fan_div, store_fan_div, 7),
-};
+#define sysfs_fan(offset) \
+static SENSOR_DEVICE_ATTR(fan##offset##_input, S_IRUGO, show_fan, NULL, \
+ offset); \
+static SENSOR_DEVICE_ATTR(fan##offset##_div, S_IRUGO | S_IWUSR, \
+ show_fan_div, store_fan_div, offset); \
+static SENSOR_DEVICE_ATTR(fan##offset##_min, S_IRUGO | S_IWUSR, \
+ show_fan_min, store_fan_min, offset);
+
+sysfs_fan(1);
+sysfs_fan(2);
+sysfs_fan(3);
+sysfs_fan(4);
+sysfs_fan(5);
+sysfs_fan(6);
+sysfs_fan(7);
+
+#define device_create_file_fan(client, offset) \
+do { \
+device_create_file(&client->dev, &sensor_dev_attr_fan##offset##_input.dev_attr); \
+device_create_file(&client->dev, &sensor_dev_attr_fan##offset##_div.dev_attr); \
+device_create_file(&client->dev, &sensor_dev_attr_fan##offset##_min.dev_attr); \
+} while (0)
/* read/write the temperature1, includes measured value and limits */
s32 val;
val = simple_strtol(buf, NULL, 10);
- mutex_lock(&data->update_lock);
+
data->temp1[nr] = TEMP1_TO_REG(val);
w83792d_write_value(client, W83792D_REG_TEMP1[nr],
data->temp1[nr]);
- mutex_unlock(&data->update_lock);
return count;
}
+
+static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_temp1, NULL, 0);
+static SENSOR_DEVICE_ATTR(temp1_max, S_IRUGO | S_IWUSR, show_temp1,
+ store_temp1, 1);
+static SENSOR_DEVICE_ATTR(temp1_max_hyst, S_IRUGO | S_IWUSR, show_temp1,
+ store_temp1, 2);
+
+#define device_create_file_temp1(client) \
+do { \
+device_create_file(&client->dev, &sensor_dev_attr_temp1_input.dev_attr); \
+device_create_file(&client->dev, &sensor_dev_attr_temp1_max.dev_attr); \
+device_create_file(&client->dev, &sensor_dev_attr_temp1_max_hyst.dev_attr); \
+} while (0)
+
+
/* read/write the temperature2-3, includes measured value and limits */
static ssize_t show_temp23(struct device *dev, struct device_attribute *attr,
s32 val;
val = simple_strtol(buf, NULL, 10);
- mutex_lock(&data->update_lock);
+
data->temp_add[nr][index] = TEMP_ADD_TO_REG_HIGH(val);
data->temp_add[nr][index+1] = TEMP_ADD_TO_REG_LOW(val);
w83792d_write_value(client, W83792D_REG_TEMP_ADD[nr][index],
data->temp_add[nr][index]);
w83792d_write_value(client, W83792D_REG_TEMP_ADD[nr][index+1],
data->temp_add[nr][index+1]);
- mutex_unlock(&data->update_lock);
return count;
}
-static struct sensor_device_attribute_2 sda_temp_input[] = {
- SENSOR_ATTR_2(temp1_input, S_IRUGO, show_temp1, NULL, 0, 0),
- SENSOR_ATTR_2(temp2_input, S_IRUGO, show_temp23, NULL, 0, 0),
- SENSOR_ATTR_2(temp3_input, S_IRUGO, show_temp23, NULL, 1, 0),
-};
+#define sysfs_temp23(name,idx) \
+static SENSOR_DEVICE_ATTR_2(name##_input, S_IRUGO, show_temp23, NULL, \
+ idx, 0); \
+static SENSOR_DEVICE_ATTR_2(name##_max, S_IRUGO | S_IWUSR, \
+ show_temp23, store_temp23, idx, 2); \
+static SENSOR_DEVICE_ATTR_2(name##_max_hyst, S_IRUGO | S_IWUSR, \
+ show_temp23, store_temp23, idx, 4);
-static struct sensor_device_attribute_2 sda_temp_max[] = {
- SENSOR_ATTR_2(temp1_max, S_IRUGO | S_IWUSR, show_temp1, store_temp1, 0, 1),
- SENSOR_ATTR_2(temp2_max, S_IRUGO | S_IWUSR, show_temp23, store_temp23, 0, 2),
- SENSOR_ATTR_2(temp3_max, S_IRUGO | S_IWUSR, show_temp23, store_temp23, 1, 2),
-};
+sysfs_temp23(temp2,0)
+sysfs_temp23(temp3,1)
+
+#define device_create_file_temp_add(client, offset) \
+do { \
+device_create_file(&client->dev, &sensor_dev_attr_temp##offset##_input.dev_attr); \
+device_create_file(&client->dev, &sensor_dev_attr_temp##offset##_max.dev_attr); \
+device_create_file(&client->dev, \
+&sensor_dev_attr_temp##offset##_max_hyst.dev_attr); \
+} while (0)
-static struct sensor_device_attribute_2 sda_temp_max_hyst[] = {
- SENSOR_ATTR_2(temp1_max_hyst, S_IRUGO | S_IWUSR, show_temp1, store_temp1, 0, 2),
- SENSOR_ATTR_2(temp2_max_hyst, S_IRUGO | S_IWUSR, show_temp23, store_temp23, 0, 4),
- SENSOR_ATTR_2(temp3_max_hyst, S_IRUGO | S_IWUSR, show_temp23, store_temp23, 1, 4),
-};
/* get reatime status of all sensors items: voltage, temp, fan */
static ssize_t
static
DEVICE_ATTR(alarms, S_IRUGO, show_alarms_reg, NULL);
+#define device_create_file_alarms(client) \
+device_create_file(&client->dev, &dev_attr_alarms);
+
+
static ssize_t
show_pwm(struct device *dev, struct device_attribute *attr,
struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
int nr = sensor_attr->index;
struct w83792d_data *data = w83792d_update_device(dev);
- return sprintf(buf, "%d\n", (data->pwm[nr] & 0x0f) << 4);
+ return sprintf(buf, "%ld\n", (long) PWM_FROM_REG(data->pwm[nr-1]));
}
static ssize_t
const char *buf, size_t count)
{
struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
- int nr = sensor_attr->index;
+ int nr = sensor_attr->index - 1;
struct i2c_client *client = to_i2c_client(dev);
struct w83792d_data *data = i2c_get_clientdata(client);
- u8 val = SENSORS_LIMIT(simple_strtoul(buf, NULL, 10), 0, 255) >> 4;
+ u32 val;
- mutex_lock(&data->update_lock);
- val |= w83792d_read_value(client, W83792D_REG_PWM[nr]) & 0xf0;
- data->pwm[nr] = val;
+ val = simple_strtoul(buf, NULL, 10);
+ data->pwm[nr] = PWM_TO_REG(val);
w83792d_write_value(client, W83792D_REG_PWM[nr], data->pwm[nr]);
- mutex_unlock(&data->update_lock);
return count;
}
u8 fan_cfg_tmp, cfg1_tmp, cfg2_tmp, cfg3_tmp, cfg4_tmp;
val = simple_strtoul(buf, NULL, 10);
- if (val < 1 || val > 3)
- return -EINVAL;
-
- mutex_lock(&data->update_lock);
switch (val) {
case 1:
data->pwmenable[nr] = 0; /* manual mode */
case 3:
data->pwmenable[nr] = 1; /* thermal cruise/Smart Fan I */
break;
+ default:
+ return -EINVAL;
}
cfg1_tmp = data->pwmenable[0];
cfg2_tmp = (data->pwmenable[1]) << 2;
cfg4_tmp = w83792d_read_value(client,W83792D_REG_FAN_CFG) & 0xc0;
fan_cfg_tmp = ((cfg4_tmp | cfg3_tmp) | cfg2_tmp) | cfg1_tmp;
w83792d_write_value(client, W83792D_REG_FAN_CFG, fan_cfg_tmp);
- mutex_unlock(&data->update_lock);
return count;
}
-static struct sensor_device_attribute sda_pwm[] = {
- SENSOR_ATTR(pwm1, S_IWUSR | S_IRUGO, show_pwm, store_pwm, 0),
- SENSOR_ATTR(pwm2, S_IWUSR | S_IRUGO, show_pwm, store_pwm, 1),
- SENSOR_ATTR(pwm3, S_IWUSR | S_IRUGO, show_pwm, store_pwm, 2),
-};
-static struct sensor_device_attribute sda_pwm_enable[] = {
- SENSOR_ATTR(pwm1_enable, S_IWUSR | S_IRUGO,
- show_pwmenable, store_pwmenable, 1),
- SENSOR_ATTR(pwm2_enable, S_IWUSR | S_IRUGO,
- show_pwmenable, store_pwmenable, 2),
- SENSOR_ATTR(pwm3_enable, S_IWUSR | S_IRUGO,
- show_pwmenable, store_pwmenable, 3),
-};
+#define sysfs_pwm(offset) \
+static SENSOR_DEVICE_ATTR(pwm##offset, S_IRUGO | S_IWUSR, \
+ show_pwm, store_pwm, offset); \
+static SENSOR_DEVICE_ATTR(pwm##offset##_enable, S_IRUGO | S_IWUSR, \
+ show_pwmenable, store_pwmenable, offset); \
+
+sysfs_pwm(1);
+sysfs_pwm(2);
+sysfs_pwm(3);
+
+
+#define device_create_file_pwm(client, offset) \
+do { \
+device_create_file(&client->dev, &sensor_dev_attr_pwm##offset.dev_attr); \
+} while (0)
+
+#define device_create_file_pwmenable(client, offset) \
+do { \
+device_create_file(&client->dev, &sensor_dev_attr_pwm##offset##_enable.dev_attr); \
+} while (0)
static ssize_t
struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
int nr = sensor_attr->index;
struct w83792d_data *data = w83792d_update_device(dev);
- return sprintf(buf, "%d\n", data->pwm[nr] >> 7);
+ return sprintf(buf, "%d\n", data->pwm_mode[nr-1]);
}
static ssize_t
const char *buf, size_t count)
{
struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
- int nr = sensor_attr->index;
+ int nr = sensor_attr->index - 1;
struct i2c_client *client = to_i2c_client(dev);
struct w83792d_data *data = i2c_get_clientdata(client);
u32 val;
+ u8 pwm_mode_mask = 0;
val = simple_strtoul(buf, NULL, 10);
- if (val != 0 && val != 1)
- return -EINVAL;
-
- mutex_lock(&data->update_lock);
- data->pwm[nr] = w83792d_read_value(client, W83792D_REG_PWM[nr]);
- if (val) { /* PWM mode */
- data->pwm[nr] |= 0x80;
- } else { /* DC mode */
- data->pwm[nr] &= 0x7f;
- }
- w83792d_write_value(client, W83792D_REG_PWM[nr], data->pwm[nr]);
- mutex_unlock(&data->update_lock);
+ data->pwm_mode[nr] = SENSORS_LIMIT(val, 0, 1);
+ pwm_mode_mask = w83792d_read_value(client,
+ W83792D_REG_PWM[nr]) & 0x7f;
+ w83792d_write_value(client, W83792D_REG_PWM[nr],
+ ((data->pwm_mode[nr]) << 7) | pwm_mode_mask);
return count;
}
-static struct sensor_device_attribute sda_pwm_mode[] = {
- SENSOR_ATTR(pwm1_mode, S_IWUSR | S_IRUGO,
- show_pwm_mode, store_pwm_mode, 0),
- SENSOR_ATTR(pwm2_mode, S_IWUSR | S_IRUGO,
- show_pwm_mode, store_pwm_mode, 1),
- SENSOR_ATTR(pwm3_mode, S_IWUSR | S_IRUGO,
- show_pwm_mode, store_pwm_mode, 2),
-};
+#define sysfs_pwm_mode(offset) \
+static SENSOR_DEVICE_ATTR(pwm##offset##_mode, S_IRUGO | S_IWUSR, \
+ show_pwm_mode, store_pwm_mode, offset);
+
+sysfs_pwm_mode(1);
+sysfs_pwm_mode(2);
+sysfs_pwm_mode(3);
+
+#define device_create_file_pwm_mode(client, offset) \
+do { \
+device_create_file(&client->dev, &sensor_dev_attr_pwm##offset##_mode.dev_attr); \
+} while (0)
static ssize_t
static DEVICE_ATTR(chassis, S_IRUGO, show_regs_chassis, NULL);
+#define device_create_file_chassis(client) \
+do { \
+device_create_file(&client->dev, &dev_attr_chassis); \
+} while (0)
+
+
static ssize_t
show_chassis_clear(struct device *dev, struct device_attribute *attr, char *buf)
{
u8 temp1 = 0, temp2 = 0;
val = simple_strtoul(buf, NULL, 10);
- mutex_lock(&data->update_lock);
+
data->chassis_clear = SENSORS_LIMIT(val, 0 ,1);
temp1 = ((data->chassis_clear) << 7) & 0x80;
temp2 = w83792d_read_value(client,
W83792D_REG_CHASSIS_CLR) & 0x7f;
w83792d_write_value(client, W83792D_REG_CHASSIS_CLR, temp1 | temp2);
- mutex_unlock(&data->update_lock);
return count;
}
static DEVICE_ATTR(chassis_clear, S_IRUGO | S_IWUSR,
show_chassis_clear, store_chassis_clear);
+#define device_create_file_chassis_clear(client) \
+do { \
+device_create_file(&client->dev, &dev_attr_chassis_clear); \
+} while (0)
+
+
+
/* For Smart Fan I / Thermal Cruise */
static ssize_t
show_thermal_cruise(struct device *dev, struct device_attribute *attr,
val = simple_strtoul(buf, NULL, 10);
target_tmp = val;
target_tmp = target_tmp & 0x7f;
- mutex_lock(&data->update_lock);
target_mask = w83792d_read_value(client, W83792D_REG_THERMAL[nr]) & 0x80;
data->thermal_cruise[nr] = SENSORS_LIMIT(target_tmp, 0, 255);
w83792d_write_value(client, W83792D_REG_THERMAL[nr],
(data->thermal_cruise[nr]) | target_mask);
- mutex_unlock(&data->update_lock);
return count;
}
-static struct sensor_device_attribute sda_thermal_cruise[] = {
- SENSOR_ATTR(thermal_cruise1, S_IWUSR | S_IRUGO,
- show_thermal_cruise, store_thermal_cruise, 1),
- SENSOR_ATTR(thermal_cruise2, S_IWUSR | S_IRUGO,
- show_thermal_cruise, store_thermal_cruise, 2),
- SENSOR_ATTR(thermal_cruise3, S_IWUSR | S_IRUGO,
- show_thermal_cruise, store_thermal_cruise, 3),
-};
+#define sysfs_thermal_cruise(offset) \
+static SENSOR_DEVICE_ATTR(thermal_cruise##offset, S_IRUGO | S_IWUSR, \
+ show_thermal_cruise, store_thermal_cruise, offset);
+
+sysfs_thermal_cruise(1);
+sysfs_thermal_cruise(2);
+sysfs_thermal_cruise(3);
+
+#define device_create_file_thermal_cruise(client, offset) \
+do { \
+device_create_file(&client->dev, \
+&sensor_dev_attr_thermal_cruise##offset.dev_attr); \
+} while (0)
+
/* For Smart Fan I/Thermal Cruise and Smart Fan II */
static ssize_t
u8 tol_tmp, tol_mask;
val = simple_strtoul(buf, NULL, 10);
- mutex_lock(&data->update_lock);
tol_mask = w83792d_read_value(client,
W83792D_REG_TOLERANCE[nr]) & ((nr == 1) ? 0x0f : 0xf0);
tol_tmp = SENSORS_LIMIT(val, 0, 15);
}
w83792d_write_value(client, W83792D_REG_TOLERANCE[nr],
tol_mask | tol_tmp);
- mutex_unlock(&data->update_lock);
return count;
}
-static struct sensor_device_attribute sda_tolerance[] = {
- SENSOR_ATTR(tolerance1, S_IWUSR | S_IRUGO,
- show_tolerance, store_tolerance, 1),
- SENSOR_ATTR(tolerance2, S_IWUSR | S_IRUGO,
- show_tolerance, store_tolerance, 2),
- SENSOR_ATTR(tolerance3, S_IWUSR | S_IRUGO,
- show_tolerance, store_tolerance, 3),
-};
+#define sysfs_tolerance(offset) \
+static SENSOR_DEVICE_ATTR(tolerance##offset, S_IRUGO | S_IWUSR, \
+ show_tolerance, store_tolerance, offset);
+
+sysfs_tolerance(1);
+sysfs_tolerance(2);
+sysfs_tolerance(3);
+
+#define device_create_file_tolerance(client, offset) \
+do { \
+device_create_file(&client->dev, &sensor_dev_attr_tolerance##offset.dev_attr); \
+} while (0)
+
/* For Smart Fan II */
static ssize_t
u8 mask_tmp = 0;
val = simple_strtoul(buf, NULL, 10);
- mutex_lock(&data->update_lock);
data->sf2_points[index][nr] = SENSORS_LIMIT(val, 0, 127);
mask_tmp = w83792d_read_value(client,
W83792D_REG_POINTS[index][nr]) & 0x80;
w83792d_write_value(client, W83792D_REG_POINTS[index][nr],
mask_tmp|data->sf2_points[index][nr]);
- mutex_unlock(&data->update_lock);
return count;
}
-static struct sensor_device_attribute_2 sda_sf2_point[] = {
- SENSOR_ATTR_2(sf2_point1_fan1, S_IRUGO | S_IWUSR,
- show_sf2_point, store_sf2_point, 1, 1),
- SENSOR_ATTR_2(sf2_point2_fan1, S_IRUGO | S_IWUSR,
- show_sf2_point, store_sf2_point, 2, 1),
- SENSOR_ATTR_2(sf2_point3_fan1, S_IRUGO | S_IWUSR,
- show_sf2_point, store_sf2_point, 3, 1),
- SENSOR_ATTR_2(sf2_point4_fan1, S_IRUGO | S_IWUSR,
- show_sf2_point, store_sf2_point, 4, 1),
-
- SENSOR_ATTR_2(sf2_point1_fan2, S_IRUGO | S_IWUSR,
- show_sf2_point, store_sf2_point, 1, 2),
- SENSOR_ATTR_2(sf2_point2_fan2, S_IRUGO | S_IWUSR,
- show_sf2_point, store_sf2_point, 2, 2),
- SENSOR_ATTR_2(sf2_point3_fan2, S_IRUGO | S_IWUSR,
- show_sf2_point, store_sf2_point, 3, 2),
- SENSOR_ATTR_2(sf2_point4_fan2, S_IRUGO | S_IWUSR,
- show_sf2_point, store_sf2_point, 4, 2),
-
- SENSOR_ATTR_2(sf2_point1_fan3, S_IRUGO | S_IWUSR,
- show_sf2_point, store_sf2_point, 1, 3),
- SENSOR_ATTR_2(sf2_point2_fan3, S_IRUGO | S_IWUSR,
- show_sf2_point, store_sf2_point, 2, 3),
- SENSOR_ATTR_2(sf2_point3_fan3, S_IRUGO | S_IWUSR,
- show_sf2_point, store_sf2_point, 3, 3),
- SENSOR_ATTR_2(sf2_point4_fan3, S_IRUGO | S_IWUSR,
- show_sf2_point, store_sf2_point, 4, 3),
-};
+#define sysfs_sf2_point(offset, index) \
+static SENSOR_DEVICE_ATTR_2(sf2_point##offset##_fan##index, S_IRUGO | S_IWUSR, \
+ show_sf2_point, store_sf2_point, offset, index);
+
+sysfs_sf2_point(1, 1); /* Fan1 */
+sysfs_sf2_point(2, 1); /* Fan1 */
+sysfs_sf2_point(3, 1); /* Fan1 */
+sysfs_sf2_point(4, 1); /* Fan1 */
+sysfs_sf2_point(1, 2); /* Fan2 */
+sysfs_sf2_point(2, 2); /* Fan2 */
+sysfs_sf2_point(3, 2); /* Fan2 */
+sysfs_sf2_point(4, 2); /* Fan2 */
+sysfs_sf2_point(1, 3); /* Fan3 */
+sysfs_sf2_point(2, 3); /* Fan3 */
+sysfs_sf2_point(3, 3); /* Fan3 */
+sysfs_sf2_point(4, 3); /* Fan3 */
+
+#define device_create_file_sf2_point(client, offset, index) \
+do { \
+device_create_file(&client->dev, \
+&sensor_dev_attr_sf2_point##offset##_fan##index.dev_attr); \
+} while (0)
static ssize_t
u8 mask_tmp=0, level_tmp=0;
val = simple_strtoul(buf, NULL, 10);
- mutex_lock(&data->update_lock);
data->sf2_levels[index][nr] = SENSORS_LIMIT((val * 15) / 100, 0, 15);
mask_tmp = w83792d_read_value(client, W83792D_REG_LEVELS[index][nr])
& ((nr==3) ? 0xf0 : 0x0f);
level_tmp = data->sf2_levels[index][nr] << 4;
}
w83792d_write_value(client, W83792D_REG_LEVELS[index][nr], level_tmp | mask_tmp);
- mutex_unlock(&data->update_lock);
return count;
}
-static struct sensor_device_attribute_2 sda_sf2_level[] = {
- SENSOR_ATTR_2(sf2_level1_fan1, S_IRUGO | S_IWUSR,
- show_sf2_level, store_sf2_level, 1, 1),
- SENSOR_ATTR_2(sf2_level2_fan1, S_IRUGO | S_IWUSR,
- show_sf2_level, store_sf2_level, 2, 1),
- SENSOR_ATTR_2(sf2_level3_fan1, S_IRUGO | S_IWUSR,
- show_sf2_level, store_sf2_level, 3, 1),
-
- SENSOR_ATTR_2(sf2_level1_fan2, S_IRUGO | S_IWUSR,
- show_sf2_level, store_sf2_level, 1, 2),
- SENSOR_ATTR_2(sf2_level2_fan2, S_IRUGO | S_IWUSR,
- show_sf2_level, store_sf2_level, 2, 2),
- SENSOR_ATTR_2(sf2_level3_fan2, S_IRUGO | S_IWUSR,
- show_sf2_level, store_sf2_level, 3, 2),
-
- SENSOR_ATTR_2(sf2_level1_fan3, S_IRUGO | S_IWUSR,
- show_sf2_level, store_sf2_level, 1, 3),
- SENSOR_ATTR_2(sf2_level2_fan3, S_IRUGO | S_IWUSR,
- show_sf2_level, store_sf2_level, 2, 3),
- SENSOR_ATTR_2(sf2_level3_fan3, S_IRUGO | S_IWUSR,
- show_sf2_level, store_sf2_level, 3, 3),
-};
+#define sysfs_sf2_level(offset, index) \
+static SENSOR_DEVICE_ATTR_2(sf2_level##offset##_fan##index, S_IRUGO | S_IWUSR, \
+ show_sf2_level, store_sf2_level, offset, index);
+
+sysfs_sf2_level(1, 1); /* Fan1 */
+sysfs_sf2_level(2, 1); /* Fan1 */
+sysfs_sf2_level(3, 1); /* Fan1 */
+sysfs_sf2_level(1, 2); /* Fan2 */
+sysfs_sf2_level(2, 2); /* Fan2 */
+sysfs_sf2_level(3, 2); /* Fan2 */
+sysfs_sf2_level(1, 3); /* Fan3 */
+sysfs_sf2_level(2, 3); /* Fan3 */
+sysfs_sf2_level(3, 3); /* Fan3 */
+
+#define device_create_file_sf2_level(client, offset, index) \
+do { \
+device_create_file(&client->dev, \
+&sensor_dev_attr_sf2_level##offset##_fan##index.dev_attr); \
+} while (0)
+
/* This function is called when:
* w83792d_driver is inserted (when this module is loaded), for each
return err;
}
-static void device_create_file_fan(struct device *dev, int i)
-{
- device_create_file(dev, &sda_fan_input[i].dev_attr);
- device_create_file(dev, &sda_fan_div[i].dev_attr);
- device_create_file(dev, &sda_fan_min[i].dev_attr);
-}
static int
w83792d_detect(struct i2c_adapter *adapter, int address, int kind)
{
int i = 0, val1 = 0, val2;
- struct i2c_client *client;
- struct device *dev;
+ struct i2c_client *new_client;
struct w83792d_data *data;
int err = 0;
const char *client_name = "";
goto ERROR0;
}
- client = &data->client;
- dev = &client->dev;
- i2c_set_clientdata(client, data);
- client->addr = address;
- client->adapter = adapter;
- client->driver = &w83792d_driver;
- client->flags = 0;
+ new_client = &data->client;
+ i2c_set_clientdata(new_client, data);
+ new_client->addr = address;
+ new_client->adapter = adapter;
+ new_client->driver = &w83792d_driver;
+ new_client->flags = 0;
/* Now, we do the remaining detection. */
force_*=... parameter, and the Winbond will be reset to the right
bank. */
if (kind < 0) {
- if (w83792d_read_value(client, W83792D_REG_CONFIG) & 0x80) {
- dev_dbg(dev, "Detection failed at step 1\n");
+ if (w83792d_read_value(new_client, W83792D_REG_CONFIG) & 0x80) {
+ dev_warn(&new_client->dev, "Detection failed at step "
+ "3\n");
goto ERROR1;
}
- val1 = w83792d_read_value(client, W83792D_REG_BANK);
- val2 = w83792d_read_value(client, W83792D_REG_CHIPMAN);
+ val1 = w83792d_read_value(new_client, W83792D_REG_BANK);
+ val2 = w83792d_read_value(new_client, W83792D_REG_CHIPMAN);
/* Check for Winbond ID if in bank 0 */
if (!(val1 & 0x07)) { /* is Bank0 */
if (((!(val1 & 0x80)) && (val2 != 0xa3)) ||
((val1 & 0x80) && (val2 != 0x5c))) {
- dev_dbg(dev, "Detection failed at step 2\n");
goto ERROR1;
}
}
/* If Winbond chip, address of chip and W83792D_REG_I2C_ADDR
should match */
- if (w83792d_read_value(client,
+ if (w83792d_read_value(new_client,
W83792D_REG_I2C_ADDR) != address) {
- dev_dbg(dev, "Detection failed at step 3\n");
+ dev_warn(&new_client->dev, "Detection failed "
+ "at step 5\n");
goto ERROR1;
}
}
/* We have either had a force parameter, or we have already detected the
Winbond. Put it now into bank 0 and Vendor ID High Byte */
- w83792d_write_value(client,
+ w83792d_write_value(new_client,
W83792D_REG_BANK,
- (w83792d_read_value(client,
+ (w83792d_read_value(new_client,
W83792D_REG_BANK) & 0x78) | 0x80);
/* Determine the chip type. */
if (kind <= 0) {
/* get vendor ID */
- val2 = w83792d_read_value(client, W83792D_REG_CHIPMAN);
+ val2 = w83792d_read_value(new_client, W83792D_REG_CHIPMAN);
if (val2 != 0x5c) { /* the vendor is NOT Winbond */
goto ERROR1;
}
- val1 = w83792d_read_value(client, W83792D_REG_WCHIPID);
+ val1 = w83792d_read_value(new_client, W83792D_REG_WCHIPID);
if (val1 == 0x7a) {
kind = w83792d;
} else {
if (kind == 0)
- dev_warn(dev,
+ dev_warn(&new_client->dev,
"w83792d: Ignoring 'force' parameter for"
" unknown chip at adapter %d, address"
" 0x%02x\n", i2c_adapter_id(adapter),
if (kind == w83792d) {
client_name = "w83792d";
} else {
- dev_err(dev, "w83792d: Internal error: unknown"
+ dev_err(&new_client->dev, "w83792d: Internal error: unknown"
" kind (%d)?!?", kind);
goto ERROR1;
}
/* Fill in the remaining client fields and put into the global list */
- strlcpy(client->name, client_name, I2C_NAME_SIZE);
+ strlcpy(new_client->name, client_name, I2C_NAME_SIZE);
data->type = kind;
data->valid = 0;
- mutex_init(&data->update_lock);
+ init_MUTEX(&data->update_lock);
/* Tell the I2C layer a new client has arrived */
- if ((err = i2c_attach_client(client)))
+ if ((err = i2c_attach_client(new_client)))
goto ERROR1;
if ((err = w83792d_detect_subclients(adapter, address,
- kind, client)))
+ kind, new_client)))
goto ERROR2;
/* Initialize the chip */
- w83792d_init_client(client);
+ w83792d_init_client(new_client);
/* A few vars need to be filled upon startup */
for (i = 0; i < 7; i++) {
- data->fan_min[i] = w83792d_read_value(client,
+ data->fan_min[i] = w83792d_read_value(new_client,
W83792D_REG_FAN_MIN[i]);
}
/* Register sysfs hooks */
- data->class_dev = hwmon_device_register(dev);
+ data->class_dev = hwmon_device_register(&new_client->dev);
if (IS_ERR(data->class_dev)) {
err = PTR_ERR(data->class_dev);
goto ERROR3;
}
- for (i = 0; i < 9; i++) {
- device_create_file(dev, &sda_in_input[i].dev_attr);
- device_create_file(dev, &sda_in_max[i].dev_attr);
- device_create_file(dev, &sda_in_min[i].dev_attr);
- }
- for (i = 0; i < 3; i++)
- device_create_file_fan(dev, i);
+ device_create_file_in(new_client, 0);
+ device_create_file_in(new_client, 1);
+ device_create_file_in(new_client, 2);
+ device_create_file_in(new_client, 3);
+ device_create_file_in(new_client, 4);
+ device_create_file_in(new_client, 5);
+ device_create_file_in(new_client, 6);
+ device_create_file_in(new_client, 7);
+ device_create_file_in(new_client, 8);
+
+ device_create_file_fan(new_client, 1);
+ device_create_file_fan(new_client, 2);
+ device_create_file_fan(new_client, 3);
/* Read GPIO enable register to check if pins for fan 4,5 are used as
GPIO */
- val1 = w83792d_read_value(client, W83792D_REG_GPIO_EN);
+ val1 = w83792d_read_value(new_client, W83792D_REG_GPIO_EN);
if (!(val1 & 0x40))
- device_create_file_fan(dev, 3);
+ device_create_file_fan(new_client, 4);
if (!(val1 & 0x20))
- device_create_file_fan(dev, 4);
+ device_create_file_fan(new_client, 5);
- val1 = w83792d_read_value(client, W83792D_REG_PIN);
+ val1 = w83792d_read_value(new_client, W83792D_REG_PIN);
if (val1 & 0x40)
- device_create_file_fan(dev, 5);
+ device_create_file_fan(new_client, 6);
if (val1 & 0x04)
- device_create_file_fan(dev, 6);
-
- for (i = 0; i < 3; i++) {
- device_create_file(dev, &sda_temp_input[i].dev_attr);
- device_create_file(dev, &sda_temp_max[i].dev_attr);
- device_create_file(dev, &sda_temp_max_hyst[i].dev_attr);
- device_create_file(dev, &sda_thermal_cruise[i].dev_attr);
- device_create_file(dev, &sda_tolerance[i].dev_attr);
- }
-
- for (i = 0; i < ARRAY_SIZE(sda_pwm); i++) {
- device_create_file(dev, &sda_pwm[i].dev_attr);
- device_create_file(dev, &sda_pwm_enable[i].dev_attr);
- device_create_file(dev, &sda_pwm_mode[i].dev_attr);
- }
-
- device_create_file(dev, &dev_attr_alarms);
- device_create_file(dev, &dev_attr_chassis);
- device_create_file(dev, &dev_attr_chassis_clear);
-
- for (i = 0; i < ARRAY_SIZE(sda_sf2_point); i++)
- device_create_file(dev, &sda_sf2_point[i].dev_attr);
-
- for (i = 0; i < ARRAY_SIZE(sda_sf2_level); i++)
- device_create_file(dev, &sda_sf2_level[i].dev_attr);
+ device_create_file_fan(new_client, 7);
+
+ device_create_file_temp1(new_client); /* Temp1 */
+ device_create_file_temp_add(new_client, 2); /* Temp2 */
+ device_create_file_temp_add(new_client, 3); /* Temp3 */
+
+ device_create_file_alarms(new_client);
+
+ device_create_file_pwm(new_client, 1);
+ device_create_file_pwm(new_client, 2);
+ device_create_file_pwm(new_client, 3);
+
+ device_create_file_pwmenable(new_client, 1);
+ device_create_file_pwmenable(new_client, 2);
+ device_create_file_pwmenable(new_client, 3);
+
+ device_create_file_pwm_mode(new_client, 1);
+ device_create_file_pwm_mode(new_client, 2);
+ device_create_file_pwm_mode(new_client, 3);
+
+ device_create_file_chassis(new_client);
+ device_create_file_chassis_clear(new_client);
+
+ device_create_file_thermal_cruise(new_client, 1);
+ device_create_file_thermal_cruise(new_client, 2);
+ device_create_file_thermal_cruise(new_client, 3);
+
+ device_create_file_tolerance(new_client, 1);
+ device_create_file_tolerance(new_client, 2);
+ device_create_file_tolerance(new_client, 3);
+
+ device_create_file_sf2_point(new_client, 1, 1); /* Fan1 */
+ device_create_file_sf2_point(new_client, 2, 1); /* Fan1 */
+ device_create_file_sf2_point(new_client, 3, 1); /* Fan1 */
+ device_create_file_sf2_point(new_client, 4, 1); /* Fan1 */
+ device_create_file_sf2_point(new_client, 1, 2); /* Fan2 */
+ device_create_file_sf2_point(new_client, 2, 2); /* Fan2 */
+ device_create_file_sf2_point(new_client, 3, 2); /* Fan2 */
+ device_create_file_sf2_point(new_client, 4, 2); /* Fan2 */
+ device_create_file_sf2_point(new_client, 1, 3); /* Fan3 */
+ device_create_file_sf2_point(new_client, 2, 3); /* Fan3 */
+ device_create_file_sf2_point(new_client, 3, 3); /* Fan3 */
+ device_create_file_sf2_point(new_client, 4, 3); /* Fan3 */
+
+ device_create_file_sf2_level(new_client, 1, 1); /* Fan1 */
+ device_create_file_sf2_level(new_client, 2, 1); /* Fan1 */
+ device_create_file_sf2_level(new_client, 3, 1); /* Fan1 */
+ device_create_file_sf2_level(new_client, 1, 2); /* Fan2 */
+ device_create_file_sf2_level(new_client, 2, 2); /* Fan2 */
+ device_create_file_sf2_level(new_client, 3, 2); /* Fan2 */
+ device_create_file_sf2_level(new_client, 1, 3); /* Fan3 */
+ device_create_file_sf2_level(new_client, 2, 3); /* Fan3 */
+ device_create_file_sf2_level(new_client, 3, 3); /* Fan3 */
return 0;
kfree(data->lm75[1]);
}
ERROR2:
- i2c_detach_client(client);
+ i2c_detach_client(new_client);
ERROR1:
kfree(data);
ERROR0:
struct i2c_client *client = to_i2c_client(dev);
struct w83792d_data *data = i2c_get_clientdata(client);
int i, j;
- u8 reg_array_tmp[4], reg_tmp;
+ u8 reg_array_tmp[4], pwm_array_tmp[7], reg_tmp;
- mutex_lock(&data->update_lock);
+ down(&data->update_lock);
if (time_after
(jiffies - data->last_updated, (unsigned long) (HZ * 3))
data->fan_min[i] = w83792d_read_value(client,
W83792D_REG_FAN_MIN[i]);
/* Update the PWM/DC Value and PWM/DC flag */
- data->pwm[i] = w83792d_read_value(client,
+ pwm_array_tmp[i] = w83792d_read_value(client,
W83792D_REG_PWM[i]);
+ data->pwm[i] = pwm_array_tmp[i] & 0x0f;
+ data->pwm_mode[i] = pwm_array_tmp[i] >> 7;
}
reg_tmp = w83792d_read_value(client, W83792D_REG_FAN_CFG);
data->valid = 1;
}
- mutex_unlock(&data->update_lock);
+ up(&data->update_lock);
#ifdef DEBUG
w83792d_print_debug(data, dev);
dev_dbg(dev, "fan[%d] is: 0x%x\n", i, data->fan[i]);
dev_dbg(dev, "fan[%d] min is: 0x%x\n", i, data->fan_min[i]);
dev_dbg(dev, "pwm[%d] is: 0x%x\n", i, data->pwm[i]);
+ dev_dbg(dev, "pwm_mode[%d] is: 0x%x\n", i, data->pwm_mode[i]);
}
dev_dbg(dev, "3 set of Temperatures: =====>\n");
for (i=0; i<3; i++) {
git://git.onelab.eu / linux-2.6.git / blobdiff