ICH7
ESB2
ICH8
+ ICH9
This driver can also be built as a module. If so, the module
will be called i2c-i801.
I2C bus.
config I2C_PIIX4
- tristate "Intel PIIX4 and compatible (ATI/Serverworks/Broadcom/SMSC)"
+ tristate "Intel PIIX4"
depends on I2C && PCI
help
If you say yes to this option, support will be included for the Intel
PIIX4 family of mainboard I2C interfaces. Specifically, the following
- versions of the chipset are supported (note that Serverworks is part
- of Broadcom):
+ versions of the chipset are supported:
Intel PIIX4
Intel 440MX
- ATI IXP200
- ATI IXP300
- ATI IXP400
Serverworks OSB4
Serverworks CSB5
Serverworks CSB6
- Serverworks HT-1000
SMSC Victory66
This driver can also be built as a module. If so, the module
will be called i2c-powermac.
config I2C_MPC
- tristate "MPC107/824x/85xx/52xx/86xx"
+ tristate "MPC107/824x/85xx/52xx"
depends on I2C && PPC32
help
If you say yes to this option, support will be included for the
built-in I2C interface on the MPC107/Tsi107/MPC8240/MPC8245 and
- MPC85xx/MPC8641 family processors. The driver may also work on 52xx
+ MPC85xx family processors. The driver may also work on 52xx
family processors, though interrupts are known not to work.
This driver can also be built as a module. If so, the module
This driver can also be built as a module. If so, the module
will be called i2c-nforce2.
-config I2C_OCORES
- tristate "OpenCores I2C Controller"
- depends on I2C && EXPERIMENTAL
- help
- If you say yes to this option, support will be included for the
- OpenCores I2C controller. For details see
- http://www.opencores.org/projects.cgi/web/i2c/overview
-
- This driver can also be built as a module. If so, the module
- will be called i2c-ocores.
-
config I2C_PARPORT
tristate "Parallel port adapter"
depends on I2C && PARPORT
This driver is a replacement for (and was inspired by) an older
driver named i2c-philips-par. The new driver supports more devices,
and makes it easier to add support for new devices.
-
- An adapter type parameter is now mandatory. Please read the file
- Documentation/i2c/busses/i2c-parport for details.
-
+
Another driver exists, named i2c-parport-light, which doesn't depend
on the parport driver. This is meant for embedded systems. Don't say
Y here if you intend to say Y or M there.
also be specified with a module parameter.
config SCx200_ACB
- tristate "Geode ACCESS.bus support"
- depends on X86_32 && I2C && PCI
+ tristate "NatSemi SCx200 ACCESS.bus"
+ depends on I2C && PCI
help
- Enable the use of the ACCESS.bus controllers on the Geode SCx200 and
- SC1100 processors and the CS5535 and CS5536 Geode companion devices.
+ Enable the use of the ACCESS.bus controllers of a SCx200 processor.
If you don't know what to do here, say N.
will be called i2c-via.
config I2C_VIAPRO
- tristate "VIA 82C596/82C686/823x"
+ tristate "VIA 82C596/82C686/82xx"
depends on I2C && PCI
help
If you say yes to this option, support will be included for the VIA
- 82C596/82C686/823x I2C interfaces. Specifically, the following
+ 82C596/82C686/82xx I2C interfaces. Specifically, the following
chipsets are supported:
- 82C596A/B
- 82C686A/B
- 8231
- 8233
- 8233A
- 8235
- 8237
+ VT82C596A/B
+ VT82C686A/B
+ VT8231
+ VT8233/A
+ VT8235
+ VT8237R/A
+ VT8251
This driver can also be built as a module. If so, the module
will be called i2c-viapro.
tristate "PCA9564 on an ISA bus"
depends on I2C
select I2C_ALGOPCA
- default n
help
This driver supports ISA boards using the Philips PCA 9564
Parallel bus to I2C bus controller
This driver can also be built as a module. If so, the module
will be called i2c-pca-isa.
- This device is almost undetectable and using this driver on a
- system which doesn't have this device will result in long
- delays when I2C/SMBus chip drivers are loaded (e.g. at boot
- time). If unsure, say N.
-
config I2C_MV64XXX
tristate "Marvell mv64xxx I2C Controller"
depends on I2C && MV64X60 && EXPERIMENTAL