Fedora kernel-2.6.17-1.2142_FC4 patched with stable patch-2.6.17.4-vs2.0.2-rc26.diff

[linux-2.6.git] / drivers / i2c / busses / i2c-piix4.c

diff --git a/drivers/i2c/busses/i2c-piix4.c b/drivers/i2c/busses/i2c-piix4.c
index 646381b..d9c7c00 100644 (file)
--- a/drivers/i2c/busses/i2c-piix4.c
+++ b/drivers/i2c/busses/i2c-piix4.c
@@ -22,13 +22,12 @@
 /*
    Supports:
        Intel PIIX4, 440MX
-       Serverworks OSB4, CSB5, CSB6
+       Serverworks OSB4, CSB5, CSB6, HT-1000
        SMSC Victory66
 
    Note: we assume there can only be one device, with one SMBus interface.
 */
 
-#include <linux/config.h>
 #include <linux/module.h>
 #include <linux/moduleparam.h>
 #include <linux/pci.h>
@@ -91,13 +90,13 @@ struct sd {
 
 /* If force is set to anything different from 0, we forcibly enable the
    PIIX4. DANGEROUS! */
-static int force = 0;
+static int force;
 module_param (force, int, 0);
 MODULE_PARM_DESC(force, "Forcibly enable the PIIX4. DANGEROUS!");
 
 /* If force_addr is set to anything different from 0, we forcibly enable
    the PIIX4 at the given address. VERY DANGEROUS! */
-static int force_addr = 0;
+static int force_addr;
 module_param (force_addr, int, 0);
 MODULE_PARM_DESC(force_addr,
                 "Forcibly enable the PIIX4 at the given address. "
@@ -105,14 +104,15 @@ MODULE_PARM_DESC(force_addr,
 
 /* If fix_hstcfg is set to anything different from 0, we reset one of the
    registers to be a valid value. */
-static int fix_hstcfg = 0;
+static int fix_hstcfg;
 module_param (fix_hstcfg, int, 0);
 MODULE_PARM_DESC(fix_hstcfg,
                "Fix config register. Needed on some boards (Force CPCI735).");
 
 static int piix4_transaction(void);
 
-static unsigned short piix4_smba = 0;
+static unsigned short piix4_smba;
+static struct pci_driver piix4_driver;
 static struct i2c_adapter piix4_adapter;
 
 static struct dmi_system_id __devinitdata piix4_dmi_table[] = {
@@ -158,7 +158,7 @@ static int __devinit piix4_setup(struct pci_dev *PIIX4_dev,
                }
        }
 
-       if (!request_region(piix4_smba, SMBIOSIZE, "piix4-smbus")) {
+       if (!request_region(piix4_smba, SMBIOSIZE, piix4_driver.name)) {
                dev_err(&PIIX4_dev->dev, "SMB region 0x%x already in use!\n",
                        piix4_smba);
                return -ENODEV;
@@ -244,7 +244,7 @@ static int piix4_transaction(void)
        /* Make sure the SMBus host is ready to start transmitting */
        if ((temp = inb_p(SMBHSTSTS)) != 0x00) {
                dev_dbg(&piix4_adapter.dev, "SMBus busy (%02x). "
-                       "Resetting... \n", temp);
+                       "Resetting...\n", temp);
                outb_p(temp, SMBHSTSTS);
                if ((temp = inb_p(SMBHSTSTS)) != 0x00) {
                        dev_err(&piix4_adapter.dev, "Failed! (%02x)\n", temp);
@@ -400,8 +400,6 @@ static u32 piix4_func(struct i2c_adapter *adapter)
 }
 
 static struct i2c_algorithm smbus_algorithm = {
-       .name           = "Non-I2C SMBus adapter",
-       .id             = I2C_ALGO_SMBUS,
        .smbus_xfer     = piix4_access,
        .functionality  = piix4_func,
 };
@@ -410,7 +408,6 @@ static struct i2c_adapter piix4_adapter = {
        .owner          = THIS_MODULE,
        .class          = I2C_CLASS_HWMON,
        .algo           = &smbus_algorithm,
-       .name           = "unset",
 };
 
 static struct pci_device_id piix4_ids[] = {
@@ -422,6 +419,8 @@ static struct pci_device_id piix4_ids[] = {
          .driver_data = 0 },
        { PCI_DEVICE(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_CSB6),
          .driver_data = 0 },
+       { PCI_DEVICE(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_HT1000SB),
+         .driver_data = 0 },
        { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443MX_3),
          .driver_data = 3 },
        { PCI_DEVICE(PCI_VENDOR_ID_EFAR, PCI_DEVICE_ID_EFAR_SLC90E66_3),