/*
i2c-viapro.c - Part of lm_sensors, Linux kernel modules for hardware
monitoring
- Copyright (c) 1998 - 2002 Frodo Looijaard <frodol@dds.nl>,
+ Copyright (c) 1998 - 2002 Frodo Looijaard <frodol@dds.nl>,
Philip Edelbrock <phil@netroedge.com>, Kyösti Mälkki <kmalkki@cc.hut.fi>,
Mark D. Studebaker <mdsxyz123@yahoo.com>
+ Copyright (C) 2005 Jean Delvare <khali@linux-fr.org>
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
*/
/*
- Supports Via devices:
- 82C596A/B (0x3050)
- 82C596B (0x3051)
- 82C686A/B
- 8231
- 8233
- 8233A (0x3147 and 0x3177)
- 8235
- 8237
+ Supports the following VIA south bridges:
+
+ Chip name PCI ID REV I2C block
+ VT82C596A 0x3050 no
+ VT82C596B 0x3051 no
+ VT82C686A 0x3057 0x30 no
+ VT82C686B 0x3057 0x40 yes
+ VT8231 0x8235 no?
+ VT8233 0x3074 yes
+ VT8233A 0x3147 yes?
+ VT8235 0x3177 yes
+ VT8237R 0x3227 yes
+
Note: we assume there can only be one device, with one SMBus interface.
*/
-#include <linux/config.h>
#include <linux/module.h>
#include <linux/delay.h>
#include <linux/pci.h>
#include <linux/kernel.h>
#include <linux/stddef.h>
-#include <linux/sched.h>
#include <linux/ioport.h>
#include <linux/i2c.h>
#include <linux/init.h>
static struct pci_dev *vt596_pdev;
-#define SMBBA1 0x90
-#define SMBBA2 0x80
-#define SMBBA3 0xD0
+#define SMBBA1 0x90
+#define SMBBA2 0x80
+#define SMBBA3 0xD0
/* SMBus address offsets */
static unsigned short vt596_smba;
#define SMBHSTSTS (vt596_smba + 0)
-#define SMBHSLVSTS (vt596_smba + 1)
#define SMBHSTCNT (vt596_smba + 2)
#define SMBHSTCMD (vt596_smba + 3)
#define SMBHSTADD (vt596_smba + 4)
#define SMBHSTDAT0 (vt596_smba + 5)
#define SMBHSTDAT1 (vt596_smba + 6)
#define SMBBLKDAT (vt596_smba + 7)
-#define SMBSLVCNT (vt596_smba + 8)
-#define SMBSHDWCMD (vt596_smba + 9)
-#define SMBSLVEVT (vt596_smba + 0xA)
-#define SMBSLVDAT (vt596_smba + 0xC)
/* PCI Address Constants */
/* SMBus data in configuration space can be found in two places,
- We try to select the better one*/
-
-static unsigned short smb_cf_hstcfg = 0xD2;
+ We try to select the better one */
-#define SMBHSTCFG (smb_cf_hstcfg)
-#define SMBSLVC (smb_cf_hstcfg + 1)
-#define SMBSHDW1 (smb_cf_hstcfg + 2)
-#define SMBSHDW2 (smb_cf_hstcfg + 3)
-#define SMBREV (smb_cf_hstcfg + 4)
+static unsigned short SMBHSTCFG = 0xD2;
/* Other settings */
#define MAX_TIMEOUT 500
-#define ENABLE_INT9 0
/* VT82C596 constants */
-#define VT596_QUICK 0x00
-#define VT596_BYTE 0x04
-#define VT596_BYTE_DATA 0x08
-#define VT596_WORD_DATA 0x0C
-#define VT596_BLOCK_DATA 0x14
+#define VT596_QUICK 0x00
+#define VT596_BYTE 0x04
+#define VT596_BYTE_DATA 0x08
+#define VT596_WORD_DATA 0x0C
+#define VT596_BLOCK_DATA 0x14
+#define VT596_I2C_BLOCK_DATA 0x34
/* If force is set to anything different from 0, we forcibly enable the
"EXTREMELY DANGEROUS!");
+static struct pci_driver vt596_driver;
static struct i2c_adapter vt596_adapter;
-/* Another internally used function */
-static int vt596_transaction(void)
+#define FEATURE_I2CBLOCK (1<<0)
+static unsigned int vt596_features;
+
+#ifdef DEBUG
+static void vt596_dump_regs(const char *msg, u8 size)
+{
+ dev_dbg(&vt596_adapter.dev, "%s: STS=%02x CNT=%02x CMD=%02x ADD=%02x "
+ "DAT=%02x,%02x\n", msg, inb_p(SMBHSTSTS), inb_p(SMBHSTCNT),
+ inb_p(SMBHSTCMD), inb_p(SMBHSTADD), inb_p(SMBHSTDAT0),
+ inb_p(SMBHSTDAT1));
+
+ if (size == VT596_BLOCK_DATA
+ || size == VT596_I2C_BLOCK_DATA) {
+ int i;
+
+ dev_dbg(&vt596_adapter.dev, "BLK=");
+ for (i = 0; i < I2C_SMBUS_BLOCK_MAX / 2; i++)
+ printk("%02x,", inb_p(SMBBLKDAT));
+ printk("\n");
+ dev_dbg(&vt596_adapter.dev, " ");
+ for (; i < I2C_SMBUS_BLOCK_MAX - 1; i++)
+ printk("%02x,", inb_p(SMBBLKDAT));
+ printk("%02x\n", inb_p(SMBBLKDAT));
+ }
+}
+#else
+static inline void vt596_dump_regs(const char *msg, u8 size) { }
+#endif
+
+/* Return -1 on error, 0 on success */
+static int vt596_transaction(u8 size)
{
int temp;
int result = 0;
int timeout = 0;
- dev_dbg(&vt596_adapter.dev, "Transaction (pre): CNT=%02x, CMD=%02x, "
- "ADD=%02x, DAT0=%02x, DAT1=%02x\n", inb_p(SMBHSTCNT),
- inb_p(SMBHSTCMD), inb_p(SMBHSTADD), inb_p(SMBHSTDAT0),
- inb_p(SMBHSTDAT1));
+ vt596_dump_regs("Transaction (pre)", size);
/* Make sure the SMBus host is ready to start transmitting */
if ((temp = inb_p(SMBHSTSTS)) & 0x1F) {
dev_dbg(&vt596_adapter.dev, "SMBus busy (0x%02x). "
- "Resetting...\n", temp);
-
+ "Resetting...\n", temp);
+
outb_p(temp, SMBHSTSTS);
if ((temp = inb_p(SMBHSTSTS)) & 0x1F) {
- dev_dbg(&vt596_adapter.dev, "Failed! (0x%02x)\n", temp);
-
+ dev_err(&vt596_adapter.dev, "SMBus reset failed! "
+ "(0x%02x)\n", temp);
return -1;
- } else {
- dev_dbg(&vt596_adapter.dev, "Successfull!\n");
}
}
- /* start the transaction by setting bit 6 */
- outb_p(inb(SMBHSTCNT) | 0x040, SMBHSTCNT);
+ /* Start the transaction by setting bit 6 */
+ outb_p(0x40 | size, SMBHSTCNT);
- /* We will always wait for a fraction of a second!
- I don't know if VIA needs this, Intel did */
+ /* We will always wait for a fraction of a second */
do {
msleep(1);
temp = inb_p(SMBHSTSTS);
/* If the SMBus is still busy, we give up */
if (timeout >= MAX_TIMEOUT) {
result = -1;
- dev_dbg(&vt596_adapter.dev, "SMBus Timeout!\n");
+ dev_err(&vt596_adapter.dev, "SMBus timeout!\n");
}
if (temp & 0x10) {
result = -1;
- dev_dbg(&vt596_adapter.dev, "Error: Failed bus transaction\n");
+ dev_err(&vt596_adapter.dev, "Transaction failed (0x%02x)\n",
+ size);
}
if (temp & 0x08) {
result = -1;
- dev_info(&vt596_adapter.dev, "Bus collision! SMBus may be "
- "locked until next hard\nreset. (sorry!)\n");
- /* Clock stops and slave is stuck in mid-transmission */
+ dev_err(&vt596_adapter.dev, "SMBus collision!\n");
}
if (temp & 0x04) {
+ int read = inb_p(SMBHSTADD) & 0x01;
result = -1;
- dev_dbg(&vt596_adapter.dev, "Error: no response!\n");
+ /* The quick and receive byte commands are used to probe
+ for chips, so errors are expected, and we don't want
+ to frighten the user. */
+ if (!((size == VT596_QUICK && !read) ||
+ (size == VT596_BYTE && read)))
+ dev_err(&vt596_adapter.dev, "Transaction error!\n");
}
- if ((temp = inb_p(SMBHSTSTS)) & 0x1F) {
+ /* Resetting status register */
+ if (temp & 0x1F)
outb_p(temp, SMBHSTSTS);
- if ((temp = inb_p(SMBHSTSTS)) & 0x1F) {
- dev_warn(&vt596_adapter.dev, "Failed reset at end "
- "of transaction (%02x)\n", temp);
- }
- }
- dev_dbg(&vt596_adapter.dev, "Transaction (post): CNT=%02x, CMD=%02x, "
- "ADD=%02x, DAT0=%02x, DAT1=%02x\n", inb_p(SMBHSTCNT),
- inb_p(SMBHSTCMD), inb_p(SMBHSTADD), inb_p(SMBHSTDAT0),
- inb_p(SMBHSTDAT1));
-
+ vt596_dump_regs("Transaction (post)", size);
+
return result;
}
-/* Return -1 on error. */
+/* Return -1 on error, 0 on success */
static s32 vt596_access(struct i2c_adapter *adap, u16 addr,
- unsigned short flags, char read_write, u8 command,
- int size, union i2c_smbus_data *data)
+ unsigned short flags, char read_write, u8 command,
+ int size, union i2c_smbus_data *data)
{
- int i, len;
+ int i;
switch (size) {
- case I2C_SMBUS_PROC_CALL:
- dev_info(&vt596_adapter.dev,
- "I2C_SMBUS_PROC_CALL not supported!\n");
- return -1;
case I2C_SMBUS_QUICK:
- outb_p(((addr & 0x7f) << 1) | (read_write & 0x01),
- SMBHSTADD);
size = VT596_QUICK;
break;
case I2C_SMBUS_BYTE:
- outb_p(((addr & 0x7f) << 1) | (read_write & 0x01),
- SMBHSTADD);
if (read_write == I2C_SMBUS_WRITE)
outb_p(command, SMBHSTCMD);
size = VT596_BYTE;
break;
case I2C_SMBUS_BYTE_DATA:
- outb_p(((addr & 0x7f) << 1) | (read_write & 0x01),
- SMBHSTADD);
outb_p(command, SMBHSTCMD);
if (read_write == I2C_SMBUS_WRITE)
outb_p(data->byte, SMBHSTDAT0);
size = VT596_BYTE_DATA;
break;
case I2C_SMBUS_WORD_DATA:
- outb_p(((addr & 0x7f) << 1) | (read_write & 0x01),
- SMBHSTADD);
outb_p(command, SMBHSTCMD);
if (read_write == I2C_SMBUS_WRITE) {
outb_p(data->word & 0xff, SMBHSTDAT0);
}
size = VT596_WORD_DATA;
break;
+ case I2C_SMBUS_I2C_BLOCK_DATA:
+ if (!(vt596_features & FEATURE_I2CBLOCK))
+ goto exit_unsupported;
+ if (read_write == I2C_SMBUS_READ)
+ outb_p(I2C_SMBUS_BLOCK_MAX, SMBHSTDAT0);
+ /* Fall through */
case I2C_SMBUS_BLOCK_DATA:
- outb_p(((addr & 0x7f) << 1) | (read_write & 0x01),
- SMBHSTADD);
outb_p(command, SMBHSTCMD);
if (read_write == I2C_SMBUS_WRITE) {
- len = data->block[0];
- if (len < 0)
- len = 0;
+ u8 len = data->block[0];
if (len > I2C_SMBUS_BLOCK_MAX)
len = I2C_SMBUS_BLOCK_MAX;
outb_p(len, SMBHSTDAT0);
- i = inb_p(SMBHSTCNT); /* Reset SMBBLKDAT */
+ inb_p(SMBHSTCNT); /* Reset SMBBLKDAT */
for (i = 1; i <= len; i++)
outb_p(data->block[i], SMBBLKDAT);
}
- size = VT596_BLOCK_DATA;
+ size = (size == I2C_SMBUS_I2C_BLOCK_DATA) ?
+ VT596_I2C_BLOCK_DATA : VT596_BLOCK_DATA;
break;
+ default:
+ goto exit_unsupported;
}
- outb_p((size & 0x1C) + (ENABLE_INT9 & 1), SMBHSTCNT);
+ outb_p(((addr & 0x7f) << 1) | read_write, SMBHSTADD);
- if (vt596_transaction()) /* Error in transaction */
+ if (vt596_transaction(size)) /* Error in transaction */
return -1;
if ((read_write == I2C_SMBUS_WRITE) || (size == VT596_QUICK))
switch (size) {
case VT596_BYTE:
- /* Where is the result put? I assume here it is in
- * SMBHSTDAT0 but it might just as well be in the
- * SMBHSTCMD. No clue in the docs
- */
- data->byte = inb_p(SMBHSTDAT0);
- break;
case VT596_BYTE_DATA:
data->byte = inb_p(SMBHSTDAT0);
break;
case VT596_WORD_DATA:
data->word = inb_p(SMBHSTDAT0) + (inb_p(SMBHSTDAT1) << 8);
break;
+ case VT596_I2C_BLOCK_DATA:
case VT596_BLOCK_DATA:
data->block[0] = inb_p(SMBHSTDAT0);
if (data->block[0] > I2C_SMBUS_BLOCK_MAX)
data->block[0] = I2C_SMBUS_BLOCK_MAX;
- i = inb_p(SMBHSTCNT); /* Reset SMBBLKDAT */
+ inb_p(SMBHSTCNT); /* Reset SMBBLKDAT */
for (i = 1; i <= data->block[0]; i++)
data->block[i] = inb_p(SMBBLKDAT);
break;
}
return 0;
+
+exit_unsupported:
+ dev_warn(&vt596_adapter.dev, "Unsupported command invoked! (0x%02x)\n",
+ size);
+ return -1;
}
static u32 vt596_func(struct i2c_adapter *adapter)
{
- return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE |
+ u32 func = I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE |
I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA |
I2C_FUNC_SMBUS_BLOCK_DATA;
+
+ if (vt596_features & FEATURE_I2CBLOCK)
+ func |= I2C_FUNC_SMBUS_I2C_BLOCK;
+ return func;
}
static struct i2c_algorithm smbus_algorithm = {
- .name = "Non-I2C SMBus adapter",
- .id = I2C_ALGO_SMBUS,
.smbus_xfer = vt596_access,
.functionality = vt596_func,
};
.owner = THIS_MODULE,
.class = I2C_CLASS_HWMON,
.algo = &smbus_algorithm,
- .name = "unset",
};
static int __devinit vt596_probe(struct pci_dev *pdev,
{
unsigned char temp;
int error = -ENODEV;
-
+
/* Determine the address of the SMBus areas */
if (force_addr) {
vt596_smba = force_addr & 0xfff0;
}
if ((pci_read_config_word(pdev, id->driver_data, &vt596_smba)) ||
- !(vt596_smba & 0x1)) {
+ !(vt596_smba & 0x0001)) {
/* try 2nd address and config reg. for 596 */
if (id->device == PCI_DEVICE_ID_VIA_82C596_3 &&
!pci_read_config_word(pdev, SMBBA2, &vt596_smba) &&
- (vt596_smba & 0x1)) {
- smb_cf_hstcfg = 0x84;
+ (vt596_smba & 0x0001)) {
+ SMBHSTCFG = 0x84;
} else {
/* no matches at all */
dev_err(&pdev->dev, "Cannot configure "
return -ENODEV;
}
- found:
- if (!request_region(vt596_smba, 8, "viapro-smbus")) {
+found:
+ if (!request_region(vt596_smba, 8, vt596_driver.name)) {
dev_err(&pdev->dev, "SMBus region 0x%x already in use!\n",
- vt596_smba);
+ vt596_smba);
return -ENODEV;
}
pci_write_config_word(pdev, id->driver_data, vt596_smba);
pci_write_config_byte(pdev, SMBHSTCFG, temp | 0x01);
dev_warn(&pdev->dev, "WARNING: SMBus interface set to new "
- "address 0x%04x!\n", vt596_smba);
- } else if ((temp & 1) == 0) {
+ "address 0x%04x!\n", vt596_smba);
+ } else if (!(temp & 0x01)) {
if (force) {
- /* NOTE: This assumes I/O space and other allocations
- * WERE done by the Bios! Don't complain if your
- * hardware does weird things after enabling this.
- * :') Check for Bios updates before resorting to
+ /* NOTE: This assumes I/O space and other allocations
+ * WERE done by the Bios! Don't complain if your
+ * hardware does weird things after enabling this.
+ * :') Check for Bios updates before resorting to
* this.
*/
- pci_write_config_byte(pdev, SMBHSTCFG, temp | 1);
+ pci_write_config_byte(pdev, SMBHSTCFG, temp | 0x01);
dev_info(&pdev->dev, "Enabling SMBus device\n");
} else {
dev_err(&pdev->dev, "SMBUS: Error: Host SMBus "
}
}
- if ((temp & 0x0E) == 8)
- dev_dbg(&pdev->dev, "using Interrupt 9 for SMBus.\n");
- else if ((temp & 0x0E) == 0)
- dev_dbg(&pdev->dev, "using Interrupt SMI# for SMBus.\n");
- else
- dev_dbg(&pdev->dev, "Illegal Interrupt configuration "
- "(or code out of date)!\n");
-
- pci_read_config_byte(pdev, SMBREV, &temp);
- dev_dbg(&pdev->dev, "SMBREV = 0x%X\n", temp);
dev_dbg(&pdev->dev, "VT596_smba = 0x%X\n", vt596_smba);
+ switch (pdev->device) {
+ case PCI_DEVICE_ID_VIA_8237:
+ case PCI_DEVICE_ID_VIA_8235:
+ case PCI_DEVICE_ID_VIA_8233A:
+ case PCI_DEVICE_ID_VIA_8233_0:
+ vt596_features |= FEATURE_I2CBLOCK;
+ break;
+ case PCI_DEVICE_ID_VIA_82C686_4:
+ /* The VT82C686B (rev 0x40) does support I2C block
+ transactions, but the VT82C686A (rev 0x30) doesn't */
+ if (!pci_read_config_byte(pdev, PCI_REVISION_ID, &temp)
+ && temp >= 0x40)
+ vt596_features |= FEATURE_I2CBLOCK;
+ break;
+ }
+
vt596_adapter.dev.parent = &pdev->dev;
snprintf(vt596_adapter.name, I2C_NAME_SIZE,
- "SMBus Via Pro adapter at %04x", vt596_smba);
-
+ "SMBus Via Pro adapter at %04x", vt596_smba);
+
vt596_pdev = pci_dev_get(pdev);
if (i2c_add_adapter(&vt596_adapter)) {
pci_dev_put(vt596_pdev);
*/
return -ENODEV;
- release_region:
+release_region:
release_region(vt596_smba, 8);
return error;
}
{ 0, }
};
-MODULE_DEVICE_TABLE (pci, vt596_ids);
+MODULE_DEVICE_TABLE(pci, vt596_ids);
static struct pci_driver vt596_driver = {
.name = "vt596_smbus",
}
}
-MODULE_AUTHOR(
- "Frodo Looijaard <frodol@dds.nl> and "
- "Philip Edelbrock <phil@netroedge.com>");
+MODULE_AUTHOR("Kyosti Malkki <kmalkki@cc.hut.fi>, "
+ "Mark D. Studebaker <mdsxyz123@yahoo.com> and "
+ "Jean Delvare <khali@linux-fr.org>");
MODULE_DESCRIPTION("vt82c596 SMBus driver");
MODULE_LICENSE("GPL");
git://git.onelab.eu / linux-2.6.git / blobdiff