VServer 1.9.2 (patch-2.6.8.1-vs1.9.2.diff)
[linux-2.6.git] / drivers / i2c / chips / lm90.c
index f28b667..c3dd521 100644 (file)
  *   http://www.national.com/pf/LM/LM99.html
  * Note that there is no way to differenciate between both chips.
  *
+ * This driver also supports the LM86, another sensor chip made by
+ * National Semiconductor. It is exactly similar to the LM90 except it
+ * has a higher accuracy.
+ * Complete datasheet can be obtained from National's website at:
+ *   http://www.national.com/pf/LM/LM86.html
+ *
  * This driver also supports the ADM1032, a sensor chip made by Analog
  * Devices. That chip is similar to the LM90, with a few differences
  * that are not handled by this driver. Complete datasheet can be
  * obtained from Analog's website at:
  *   http://products.analog.com/products/info.asp?product=ADM1032
+ * Among others, it has a higher accuracy than the LM90, much like the
+ * LM86 does.
+ *
+ * This driver also supports the MAX6657 and MAX6658, sensor chips made
+ * by Maxim. These chips are similar to the LM86. Complete datasheet
+ * can be obtained at Maxim's website at:
+ *   http://www.maxim-ic.com/quick_view2.cfm/qv_pk/2578
+ * Note that there is no way to differenciate between both chips (but
+ * no need either).
  *
  * Since the LM90 was the first chipset supported by this driver, most
  * comments will refer to this chipset, but are actually general and
@@ -56,7 +71,7 @@
 /*
  * Addresses to scan
  * Address is fully defined internally and cannot be changed.
- * LM89, LM90, LM99 and ADM1032 have address 0x4c.
+ * LM86, LM89, LM90, LM99, ADM1032, MAX6657 and MAX6658 have address 0x4c.
  * LM89-1, and LM99-1 have address 0x4d.
  */
 
@@ -69,7 +84,7 @@ static unsigned int normal_isa_range[] = { I2C_CLIENT_ISA_END };
  * Insmod parameters
  */
 
-SENSORS_INSMOD_3(lm90, adm1032, lm99);
+SENSORS_INSMOD_5(lm90, adm1032, lm99, lm86, max6657);
 
 /*
  * The LM90 registers
@@ -289,7 +304,6 @@ static int lm90_detect(struct i2c_adapter *adapter, int address, int kind)
        struct lm90_data *data;
        int err = 0;
        const char *name = "";
-       u8 reg_config1=0, reg_convrate=0;
 
        if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
                goto exit;
@@ -319,28 +333,22 @@ static int lm90_detect(struct i2c_adapter *adapter, int address, int kind)
         * requested, so both the detection and the identification steps
         * are skipped.
         */
-       if (kind < 0) { /* detection */
-               reg_config1 = i2c_smbus_read_byte_data(new_client,
-                             LM90_REG_R_CONFIG1);
-               reg_convrate = i2c_smbus_read_byte_data(new_client,
-                              LM90_REG_R_CONVRATE);
 
-               if ((reg_config1 & 0x2A) != 0x00
-                || reg_convrate > 0x0A) {
-                       dev_dbg(&adapter->dev,
-                               "LM90 detection failed at 0x%02x.\n",
-                               address);
-                       goto exit_free;
-               }
-       }
+       /* Default to an LM90 if forced */
+       if (kind == 0)
+               kind = lm90;
 
-       if (kind <= 0) { /* identification */
-               u8 man_id, chip_id;
+       if (kind < 0) { /* detection and identification */
+               u8 man_id, chip_id, reg_config1, reg_convrate;
 
                man_id = i2c_smbus_read_byte_data(new_client,
                         LM90_REG_R_MAN_ID);
                chip_id = i2c_smbus_read_byte_data(new_client,
                          LM90_REG_R_CHIP_ID);
+               reg_config1 = i2c_smbus_read_byte_data(new_client,
+                             LM90_REG_R_CONFIG1);
+               reg_convrate = i2c_smbus_read_byte_data(new_client,
+                              LM90_REG_R_CONVRATE);
                
                if (man_id == 0x01) { /* National Semiconductor */
                        u8 reg_config2;
@@ -348,25 +356,36 @@ static int lm90_detect(struct i2c_adapter *adapter, int address, int kind)
                        reg_config2 = i2c_smbus_read_byte_data(new_client,
                                      LM90_REG_R_CONFIG2);
 
-                       if (kind == 0 /* skip detection */
-                        || ((reg_config2 & 0xF8) == 0x00
-                         && reg_convrate <= 0x09)) {
+                       if ((reg_config1 & 0x2A) == 0x00
+                        && (reg_config2 & 0xF8) == 0x00
+                        && reg_convrate <= 0x09) {
                                if (address == 0x4C
                                 && (chip_id & 0xF0) == 0x20) { /* LM90 */
                                        kind = lm90;
                                } else
                                if ((chip_id & 0xF0) == 0x30) { /* LM89/LM99 */
                                        kind = lm99;
+                               } else
+                               if (address == 0x4C
+                                && (chip_id & 0xF0) == 0x10) { /* LM86 */
+                                       kind = lm86;
                                }
                        }
                } else
                if (man_id == 0x41) { /* Analog Devices */
                        if (address == 0x4C
                         && (chip_id & 0xF0) == 0x40 /* ADM1032 */
-                        && (kind == 0 /* skip detection */
-                         || (reg_config1 & 0x3F) == 0x00)) {
+                        && (reg_config1 & 0x3F) == 0x00
+                        && reg_convrate <= 0x0A) {
                                kind = adm1032;
                        }
+               } else
+               if (man_id == 0x4D) { /* Maxim */
+                       if (address == 0x4C
+                        && (reg_config1 & 0x1F) == 0
+                        && reg_convrate <= 0x09) {
+                               kind = max6657;
+                       }
                }
 
                if (kind <= 0) { /* identification failed */
@@ -383,6 +402,10 @@ static int lm90_detect(struct i2c_adapter *adapter, int address, int kind)
                name = "adm1032";
        } else if (kind == lm99) {
                name = "lm99";
+       } else if (kind == lm86) {
+               name = "lm86";
+       } else if (kind == max6657) {
+               name = "max6657";
        }
 
        /* We can fill in the remaining client fields */