*
*/
-#include <linux/config.h>
#include <linux/module.h>
#include <linux/types.h>
#include <linux/string.h>
#include <linux/hdreg.h>
#include <linux/ide.h>
#include <linux/bitops.h>
+#include <linux/nmi.h>
#include <asm/byteorder.h>
#include <asm/irq.h>
if(HWIF(drive)->udma_four == 0)
return 0;
- /* Check for SATA but only if we are ATA5 or higher */
- if (drive->id->hw_config == 0 && (drive->id->major_rev_num & 0x7FE0))
- return 1;
+ printk(KERN_INFO "%s: hw_config=%04x\n",
+ drive->name, drive->id->hw_config);
+
+ /* Check for SATA but only if we are ATA5 or higher */
+ if (drive->id->hw_config == 0 && (drive->id->major_rev_num & 0x7FE0))
+ return 1;
if (!(drive->id->hw_config & 0x6000))
return 0;
#ifndef CONFIG_IDEDMA_IVB
if(!(drive->id->hw_config & 0x4000))
return 0;
#endif /* CONFIG_IDEDMA_IVB */
+/*
+ * FIXME: enable this after fixing master/slave IDENTIFY order,
+ * also ignore the result if the slave device is pre-ATA3 one
+ */
+#if 0
+ if (!(drive->id->hw_config & 0x2000))
+ return 0;
+#endif
return 1;
}
spin_lock_irqsave(&ide_lock, flags);
- if(hwgroup->handler)
- BUG();
+ BUG_ON(hwgroup->handler);
hwgroup->handler = handler;
hwgroup->expiry = expiry;
hwgroup->timer.expires = jiffies + timeout;
printk("%s: ATAPI reset complete\n", drive->name);
} else {
if (time_before(jiffies, hwgroup->poll_timeout)) {
- if (HWGROUP(drive)->handler != NULL)
- BUG();
+ BUG_ON(HWGROUP(drive)->handler != NULL);
ide_set_handler(drive, &atapi_reset_pollfunc, HZ/20, NULL);
/* continue polling */
return ide_started;
}
/* done polling */
hwgroup->polling = 0;
+ hwgroup->resetting = 0;
return ide_stopped;
}
if (!OK_STAT(tmp = hwif->INB(IDE_STATUS_REG), 0, BUSY_STAT)) {
if (time_before(jiffies, hwgroup->poll_timeout)) {
- if (HWGROUP(drive)->handler != NULL)
- BUG();
+ BUG_ON(HWGROUP(drive)->handler != NULL);
ide_set_handler(drive, &reset_pollfunc, HZ/20, NULL);
/* continue polling */
return ide_started;
}
}
hwgroup->polling = 0; /* done polling */
+ hwgroup->resetting = 0; /* done reset attempt */
return ide_stopped;
}
if (HWIF(drive)->pre_reset != NULL)
HWIF(drive)->pre_reset(drive);
+ if (drive->current_speed != 0xff)
+ drive->desired_speed = drive->current_speed;
+ drive->current_speed = 0xff;
}
/*
hwgroup = HWGROUP(drive);
/* We must not reset with running handlers */
- if(hwgroup->handler != NULL)
- BUG();
+ BUG_ON(hwgroup->handler != NULL);
/* For an ATAPI device, first try an ATAPI SRST. */
if (drive->media != ide_disk && !do_not_try_atapi) {
+ hwgroup->resetting = 1;
pre_reset(drive);
SELECT_DRIVE(drive);
udelay (20);
return ide_stopped;
}
+ hwgroup->resetting = 1;
/*
* Note that we also set nIEN while resetting the device,
* to mask unwanted interrupts from the interface during the reset.
if (stat == 0xff)
return -ENODEV;
touch_softlockup_watchdog();
+ touch_nmi_watchdog();
}
return -EBUSY;
}