/*
* This is the /proc/ide/ filesystem implementation.
*
- * The major reason this exists is to provide sufficient access
- * to driver and config data, such that user-mode programs can
- * be developed to handle chipset tuning for most PCI interfaces.
- * This should provide better utilities, and less kernel bloat.
- *
- * The entire pci config space for a PCI interface chipset can be
- * retrieved by just reading it. e.g. "cat /proc/ide3/config"
- *
- * To modify registers *safely*, do something like:
- * echo "P40:88" >/proc/ide/ide3/config
- * That expression writes 0x88 to pci config register 0x40
- * on the chip which controls ide3. Multiple tuples can be issued,
- * and the writes will be completed as an atomic set:
- * echo "P40:88 P41:35 P42:00 P43:00" >/proc/ide/ide3/config
- *
- * All numbers must be specified using pairs of ascii hex digits.
- * It is important to note that these writes will be performed
- * after waiting for the IDE controller (both interfaces)
- * to be completely idle, to ensure no corruption of I/O in progress.
- *
- * Non-PCI registers can also be written, using "R" in place of "P"
- * in the above examples. The size of the port transfer is determined
- * by the number of pairs of hex digits given for the data. If a two
- * digit value is given, the write will be a byte operation; if four
- * digits are used, the write will be performed as a 16-bit operation;
- * and if eight digits are specified, a 32-bit "dword" write will be
- * performed. Odd numbers of digits are not permitted.
- *
- * If there is an error *anywhere* in the string of registers/data
- * then *none* of the writes will be performed.
- *
* Drive/Driver settings can be retrieved by reading the drive's
* "settings" files. e.g. "cat /proc/ide0/hda/settings"
* To write a new value "val" into a specific setting "name", use:
* returned data as 256 16-bit words. The "hdparm" utility will
* be updated someday soon to use this mechanism.
*
- * Feel free to develop and distribute fancy GUI configuration
- * utilities for your favorite PCI chipsets. I'll be working on
- * one for the Promise 20246 someday soon. -ml
- *
*/
#include <linux/config.h>
#include <asm/io.h>
-static int proc_ide_write_config(struct file *file, const char __user *buffer,
- unsigned long count, void *data)
-{
- ide_hwif_t *hwif = (ide_hwif_t *)data;
- ide_hwgroup_t *mygroup = (ide_hwgroup_t *)(hwif->hwgroup);
- ide_hwgroup_t *mategroup = NULL;
- unsigned long timeout;
- unsigned long flags;
- const char *start = NULL, *msg = NULL;
- struct entry { u32 val; u16 reg; u8 size; u8 pci; } *prog, *q, *r;
- int want_pci = 0;
- char *buf, *s;
- int err;
-
- if (hwif->mate && hwif->mate->hwgroup)
- mategroup = (ide_hwgroup_t *)(hwif->mate->hwgroup);
-
- if (!capable(CAP_SYS_ADMIN) || !capable(CAP_SYS_RAWIO))
- return -EACCES;
-
- if (count >= PAGE_SIZE)
- return -EINVAL;
-
- s = buf = (char *)__get_free_page(GFP_USER);
- if (!buf)
- return -ENOMEM;
-
- err = -ENOMEM;
- q = prog = (struct entry *)__get_free_page(GFP_USER);
- if (!prog)
- goto out;
-
- err = -EFAULT;
- if (copy_from_user(buf, buffer, count))
- goto out1;
-
- buf[count] = '\0';
-
- while (isspace(*s))
- s++;
-
- while (*s) {
- char *p;
- int digits;
-
- start = s;
-
- if ((char *)(q + 1) > (char *)prog + PAGE_SIZE) {
- msg = "too many entries";
- goto parse_error;
- }
-
- switch (*s++) {
- case 'R': q->pci = 0;
- break;
- case 'P': q->pci = 1;
- want_pci = 1;
- break;
- default: msg = "expected 'R' or 'P'";
- goto parse_error;
- }
-
- q->reg = simple_strtoul(s, &p, 16);
- digits = p - s;
- if (!digits || digits > 4 || (q->pci && q->reg > 0xff)) {
- msg = "bad/missing register number";
- goto parse_error;
- }
- if (*p++ != ':') {
- msg = "missing ':'";
- goto parse_error;
- }
- q->val = simple_strtoul(p, &s, 16);
- digits = s - p;
- if (digits != 2 && digits != 4 && digits != 8) {
- msg = "bad data, 2/4/8 digits required";
- goto parse_error;
- }
- q->size = digits / 2;
-
- if (q->pci) {
-#ifdef CONFIG_BLK_DEV_IDEPCI
- if (q->reg & (q->size - 1)) {
- msg = "misaligned access";
- goto parse_error;
- }
-#else
- msg = "not a PCI device";
- goto parse_error;
-#endif /* CONFIG_BLK_DEV_IDEPCI */
- }
-
- q++;
-
- if (*s && !isspace(*s++)) {
- msg = "expected whitespace after data";
- goto parse_error;
- }
- while (isspace(*s))
- s++;
- }
-
- /*
- * What follows below is fucking insane, even for IDE people.
- * For now I've dealt with the obvious problems on the parsing
- * side, but IMNSHO we should simply remove the write access
- * to /proc/ide/.../config, killing that FPOS completely.
- */
-
- err = -EBUSY;
- timeout = jiffies + (3 * HZ);
- spin_lock_irqsave(&ide_lock, flags);
- while (mygroup->busy ||
- (mategroup && mategroup->busy)) {
- spin_unlock_irqrestore(&ide_lock, flags);
- if (time_after(jiffies, timeout)) {
- printk("/proc/ide/%s/config: channel(s) busy, cannot write\n", hwif->name);
- goto out1;
- }
- spin_lock_irqsave(&ide_lock, flags);
- }
-
-#ifdef CONFIG_BLK_DEV_IDEPCI
- if (want_pci && (!hwif->pci_dev || hwif->pci_dev->vendor)) {
- spin_unlock_irqrestore(&ide_lock, flags);
- printk("proc_ide: PCI registers not accessible for %s\n",
- hwif->name);
- err = -EINVAL;
- goto out1;
- }
-#endif /* CONFIG_BLK_DEV_IDEPCI */
-
- for (r = prog; r < q; r++) {
- unsigned int reg = r->reg, val = r->val;
- if (r->pci) {
-#ifdef CONFIG_BLK_DEV_IDEPCI
- int rc = 0;
- struct pci_dev *dev = hwif->pci_dev;
- switch (q->size) {
- case 1: msg = "byte";
- rc = pci_write_config_byte(dev, reg, val);
- break;
- case 2: msg = "word";
- rc = pci_write_config_word(dev, reg, val);
- break;
- case 4: msg = "dword";
- rc = pci_write_config_dword(dev, reg, val);
- break;
- }
- if (rc) {
- spin_unlock_irqrestore(&ide_lock, flags);
- printk("proc_ide_write_config: error writing %s at bus %02x dev %02x reg 0x%x value 0x%x\n",
- msg, dev->bus->number, dev->devfn, reg, val);
- printk("proc_ide_write_config: error %d\n", rc);
- err = -EIO;
- goto out1;
- }
-#endif /* CONFIG_BLK_DEV_IDEPCI */
- } else { /* not pci */
- switch (r->size) {
- case 1: hwif->OUTB(val, reg);
- break;
- case 2: hwif->OUTW(val, reg);
- break;
- case 4: hwif->OUTL(val, reg);
- break;
- }
- }
- }
- spin_unlock_irqrestore(&ide_lock, flags);
- err = count;
-out1:
- free_page((unsigned long)prog);
-out:
- free_page((unsigned long)buf);
- return err;
-
-parse_error:
- printk("parse error\n");
- printk("proc_ide: error: %s: '%s'\n", msg, start);
- err = -EINVAL;
- goto out1;
-}
-
-static int proc_ide_read_config
- (char *page, char **start, off_t off, int count, int *eof, void *data)
-{
- char *out = page;
- int len;
-
-#ifdef CONFIG_BLK_DEV_IDEPCI
- ide_hwif_t *hwif = (ide_hwif_t *)data;
- struct pci_dev *dev = hwif->pci_dev;
- if ((hwif->pci_dev && hwif->pci_dev->vendor) && dev && dev->bus) {
- int reg = 0;
-
- out += sprintf(out, "pci bus %02x device %02x vendor %04x "
- "device %04x channel %d\n",
- dev->bus->number, dev->devfn,
- hwif->pci_dev->vendor, hwif->pci_dev->device,
- hwif->channel);
- do {
- u8 val;
- int rc = pci_read_config_byte(dev, reg, &val);
- if (rc) {
- printk("proc_ide_read_config: error %d reading"
- " bus %02x dev %02x reg 0x%02x\n",
- rc, dev->bus->number, dev->devfn, reg);
- out += sprintf(out, "??%c",
- (++reg & 0xf) ? ' ' : '\n');
- } else
- out += sprintf(out, "%02x%c",
- val, (++reg & 0xf) ? ' ' : '\n');
- } while (reg < 0x100);
- } else
-#endif /* CONFIG_BLK_DEV_IDEPCI */
- out += sprintf(out, "(none)\n");
- len = out - page;
- PROC_IDE_READ_RETURN(page,start,off,count,eof,len);
-}
-
static int proc_ide_read_imodel
(char *page, char **start, off_t off, int count, int *eof, void *data)
{
case ide_qd65xx: name = "qd65xx"; break;
case ide_umc8672: name = "umc8672"; break;
case ide_ht6560b: name = "ht6560b"; break;
- case ide_pdc4030: name = "pdc4030"; break;
case ide_rz1000: name = "rz1000"; break;
case ide_trm290: name = "trm290"; break;
case ide_cmd646: name = "cmd646"; break;
PROC_IDE_READ_RETURN(page,start,off,count,eof,len);
}
+static void proc_ide_settings_warn(void)
+{
+ static int warned = 0;
+
+ if (warned)
+ return;
+
+ printk(KERN_WARNING "Warning: /proc/ide/hd?/settings interface is "
+ "obsolete, and will be removed soon!\n");
+ warned = 1;
+}
+
static int proc_ide_read_settings
(char *page, char **start, off_t off, int count, int *eof, void *data)
{
char *out = page;
int len, rc, mul_factor, div_factor;
+ proc_ide_settings_warn();
+
down(&ide_setting_sem);
out += sprintf(out, "name\t\t\tvalue\t\tmin\t\tmax\t\tmode\n");
out += sprintf(out, "----\t\t\t-----\t\t---\t\t---\t\t----\n");
if (!capable(CAP_SYS_ADMIN))
return -EACCES;
+ proc_ide_settings_warn();
+
if (count >= PAGE_SIZE)
return -EINVAL;
}
}
-void destroy_proc_ide_drives(ide_hwif_t *hwif)
+static void destroy_proc_ide_drives(ide_hwif_t *hwif)
{
int d;
static ide_proc_entry_t hwif_entries[] = {
{ "channel", S_IFREG|S_IRUGO, proc_ide_read_channel, NULL },
- { "config", S_IFREG|S_IRUGO|S_IWUSR,proc_ide_read_config, proc_ide_write_config },
{ "mate", S_IFREG|S_IRUGO, proc_ide_read_mate, NULL },
{ "model", S_IFREG|S_IRUGO, proc_ide_read_imodel, NULL },
{ NULL, 0, NULL, NULL }
EXPORT_SYMBOL_GPL(ide_pci_create_host_proc);
#endif
-void destroy_proc_ide_interfaces(void)
+void destroy_proc_ide_interface(ide_hwif_t *hwif)
{
- int h;
-
- for (h = 0; h < MAX_HWIFS; h++) {
- ide_hwif_t *hwif = &ide_hwifs[h];
- int exist = (hwif->proc != NULL);
-#if 0
- if (!hwif->present)
- continue;
-#endif
- if (exist) {
- destroy_proc_ide_drives(hwif);
- ide_remove_proc_entries(hwif->proc, hwif_entries);
- remove_proc_entry(hwif->name, proc_ide_root);
- hwif->proc = NULL;
- } else
- continue;
+ if (hwif->proc) {
+ destroy_proc_ide_drives(hwif);
+ ide_remove_proc_entries(hwif->proc, hwif_entries);
+ remove_proc_entry(hwif->name, proc_ide_root);
+ hwif->proc = NULL;
}
}
-EXPORT_SYMBOL(destroy_proc_ide_interfaces);
-
extern struct seq_operations ide_drivers_op;
static int ide_drivers_open(struct inode *inode, struct file *file)
{
void proc_ide_destroy(void)
{
remove_proc_entry("ide/drivers", proc_ide_root);
- destroy_proc_ide_interfaces();
remove_proc_entry("ide", NULL);
}
git://git.onelab.eu / linux-2.6.git / blobdiff