vserver 1.9.5.x5

[linux-2.6.git] / drivers / ide / pci / cs5530.c

diff --git a/drivers/ide/pci/cs5530.c b/drivers/ide/pci/cs5530.c
index b63e2d6..0381961 100644 (file)
--- a/drivers/ide/pci/cs5530.c
+++ b/drivers/ide/pci/cs5530.c
@@ -31,56 +31,6 @@
 #include <asm/io.h>
 #include <asm/irq.h>
 
-#define DISPLAY_CS5530_TIMINGS
-
-#if defined(DISPLAY_CS5530_TIMINGS) && defined(CONFIG_PROC_FS)
-#include <linux/stat.h>
-#include <linux/proc_fs.h>
-
-static u8 cs5530_proc = 0;
-
-static struct pci_dev *bmide_dev;
-
-static int cs5530_get_info (char *buffer, char **addr, off_t offset, int count)
-{
-       char *p = buffer;
-       unsigned long bibma = pci_resource_start(bmide_dev, 4);
-       u8  c0 = 0, c1 = 0;
-
-       /*
-        * at that point bibma+0x2 et bibma+0xa are byte registers
-        * to investigate:
-        */
-
-       c0 = inb_p((u16)bibma + 0x02);
-       c1 = inb_p((u16)bibma + 0x0a);
-
-       p += sprintf(p, "\n                                "
-                       "Cyrix 5530 Chipset.\n");
-       p += sprintf(p, "--------------- Primary Channel "
-                       "---------------- Secondary Channel "
-                       "-------------\n");
-       p += sprintf(p, "                %sabled "
-                       "                        %sabled\n",
-                       (c0&0x80) ? "dis" : " en",
-                       (c1&0x80) ? "dis" : " en");
-       p += sprintf(p, "--------------- drive0 --------- drive1 "
-                       "-------- drive0 ---------- drive1 ------\n");
-       p += sprintf(p, "DMA enabled:    %s              %s "
-                       "            %s               %s\n",
-                       (c0&0x20) ? "yes" : "no ",
-                       (c0&0x40) ? "yes" : "no ",
-                       (c1&0x20) ? "yes" : "no ",
-                       (c1&0x40) ? "yes" : "no " );
-
-       p += sprintf(p, "UDMA\n");
-       p += sprintf(p, "DMA\n");
-       p += sprintf(p, "PIO\n");
-
-       return p-buffer;
-}
-#endif /* DISPLAY_CS5530_TIMINGS && CONFIG_PROC_FS */
-
 /**
  *     cs5530_xfer_set_mode    -       set a new transfer mode at the drive
  *     @drive: drive to tune
@@ -272,14 +222,6 @@ static unsigned int __init init_chipset_cs5530 (struct pci_dev *dev, const char
        struct pci_dev *master_0 = NULL, *cs5530_0 = NULL;
        unsigned long flags;
 
-#if defined(DISPLAY_CS5530_TIMINGS) && defined(CONFIG_PROC_FS)
-       if (!cs5530_proc) {
-               cs5530_proc = 1;
-               bmide_dev = dev;
-               ide_pci_create_host_proc("cs5530", cs5530_get_info);
-       }
-#endif /* DISPLAY_CS5530_TIMINGS && CONFIG_PROC_FS */
-
        dev = NULL;
        while ((dev = pci_find_device(PCI_VENDOR_ID_CYRIX, PCI_ANY_ID, dev)) != NULL) {
                switch (dev->device) {
@@ -411,13 +353,11 @@ static ide_pci_device_t cs5530_chipset __devinitdata = {
        .channels       = 2,
        .autodma        = AUTODMA,
        .bootable       = ON_BOARD,
-       .flags          = IDEPCI_FLAG_FORCE_MASTER,
 };
 
 static int __devinit cs5530_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 {
-       ide_setup_pci_device(dev, &cs5530_chipset);
-       return 0;
+       return ide_setup_pci_device(dev, &cs5530_chipset);
 }
 
 static struct pci_device_id cs5530_pci_tbl[] = {