vserver 1.9.5.x5
[linux-2.6.git] / drivers / ide / pci / siimage.c
index 6c87498..2b9961b 100644 (file)
@@ -420,37 +420,16 @@ static int siimage_config_drive_for_dma (ide_drive_t *drive)
        struct hd_driveid *id   = drive->id;
 
        if ((id->capability & 1) != 0 && drive->autodma) {
-               /* Consult the list of known "bad" drives */
-               if (__ide_dma_bad_drive(drive))
-                       goto fast_ata_pio;
-
-               if ((id->field_valid & 4) && siimage_ratemask(drive)) {
-                       if (id->dma_ultra & hwif->ultra_mask) {
-                               /* Force if Capable UltraDMA */
-                               int dma = config_chipset_for_dma(drive);
-                               if ((id->field_valid & 2) && !dma)
-                                       goto try_dma_modes;
-                       }
-               } else if (id->field_valid & 2) {
-try_dma_modes:
-                       if ((id->dma_mword & hwif->mwdma_mask) ||
-                           (id->dma_1word & hwif->swdma_mask)) {
-                               /* Force if Capable regular DMA modes */
-                               if (!config_chipset_for_dma(drive))
-                                       goto no_dma_set;
-                       }
-               } else if (__ide_dma_good_drive(drive) &&
-                          (id->eide_dma_time < 150)) {
-                       /* Consult the list of known "good" drives */
-                       if (!config_chipset_for_dma(drive))
-                               goto no_dma_set;
-               } else {
-                       goto fast_ata_pio;
+
+               if (ide_use_dma(drive)) {
+                       if (config_chipset_for_dma(drive))
+                               return hwif->ide_dma_on(drive);
                }
-               return hwif->ide_dma_on(drive);
+
+               goto fast_ata_pio;
+
        } else if ((id->capability & 8) || (id->field_valid & 2)) {
 fast_ata_pio:
-no_dma_set:
                config_chipset_for_pio(drive, 1);
                return hwif->ide_dma_off_quietly(drive);
        }
@@ -554,12 +533,6 @@ static int siimage_mmio_ide_dma_test_irq (ide_drive_t *drive)
        return 0;
 }
 
-static int siimage_mmio_ide_dma_verbose (ide_drive_t *drive)
-{
-       int temp = __ide_dma_verbose(drive);
-       return temp;
-}
-
 /**
  *     siimage_busproc         -       bus isolation ioctl
  *     @drive: drive to isolate/restore
@@ -617,7 +590,7 @@ static int siimage_reset_poll (ide_drive_t *drive)
                if ((hwif->INL(SATA_STATUS_REG) & 0x03) != 0x03) {
                        printk(KERN_WARNING "%s: reset phy dead, status=0x%08x\n",
                                hwif->name, hwif->INL(SATA_STATUS_REG));
-                       HWGROUP(drive)->poll_timeout = 0;
+                       HWGROUP(drive)->polling = 0;
                        return ide_started;
                }
                return 0;
@@ -898,12 +871,11 @@ static void __devinit init_mmio_iops_siimage(ide_hwif_t *hwif)
         *      the MMIO layout isnt the same as the the standard port
         *      based I/O
         */
-        
+
        memset(&hw, 0, sizeof(hw_regs_t));
-       hw.priv                         = addr;
 
-       base                            = (unsigned long)addr;
-       if(ch)
+       base = (unsigned long)addr;
+       if (ch)
                base += 0xC0;
        else
                base += 0x80;
@@ -928,16 +900,16 @@ static void __devinit init_mmio_iops_siimage(ide_hwif_t *hwif)
 
        hw.io_ports[IDE_IRQ_OFFSET]     = 0;
 
-        if (pdev_is_sata(dev)) {
-               base = (unsigned long) addr;
-               if(ch)
-                       base += 0x80;
-               hw.sata_scr[SATA_STATUS_OFFSET] = base + 0x104;
-               hw.sata_scr[SATA_ERROR_OFFSET]  = base + 0x108;
-               hw.sata_scr[SATA_CONTROL_OFFSET]= base + 0x100;
-               hw.sata_misc[SATA_MISC_OFFSET]  = base + 0x140;
-               hw.sata_misc[SATA_PHY_OFFSET]   = base + 0x144;
-               hw.sata_misc[SATA_IEN_OFFSET]   = base + 0x148;
+       if (pdev_is_sata(dev)) {
+               base = (unsigned long)addr;
+               if (ch)
+                       base += 0x80;
+               hwif->sata_scr[SATA_STATUS_OFFSET]      = base + 0x104;
+               hwif->sata_scr[SATA_ERROR_OFFSET]       = base + 0x108;
+               hwif->sata_scr[SATA_CONTROL_OFFSET]     = base + 0x100;
+               hwif->sata_misc[SATA_MISC_OFFSET]       = base + 0x140;
+               hwif->sata_misc[SATA_PHY_OFFSET]        = base + 0x144;
+               hwif->sata_misc[SATA_IEN_OFFSET]        = base + 0x148;
        }
 
        hw.irq                          = hwif->pci_dev->irq;
@@ -945,11 +917,6 @@ static void __devinit init_mmio_iops_siimage(ide_hwif_t *hwif)
        memcpy(&hwif->hw, &hw, sizeof(hw));
        memcpy(hwif->io_ports, hwif->hw.io_ports, sizeof(hwif->hw.io_ports));
 
-       if (is_sata(hwif)) {
-               memcpy(hwif->sata_scr, hwif->hw.sata_scr, sizeof(hwif->hw.sata_scr));
-               memcpy(hwif->sata_misc, hwif->hw.sata_misc, sizeof(hwif->hw.sata_misc));
-       }
-
        hwif->irq                       = hw.irq;
 
                base = (unsigned long) addr;
@@ -987,6 +954,22 @@ static int is_dev_seagate_sata(ide_drive_t *drive)
        return 0;
 }
 
+/**
+ *     siimage_fixup           -       post probe fixups
+ *     @hwif: interface to fix up
+ *
+ *     Called after drive probe we use this to decide whether the
+ *     Seagate fixup must be applied. This used to be in init_iops but
+ *     that can occur before we know what drives are present.
+ */
+
+static void __devinit siimage_fixup(ide_hwif_t *hwif)
+{
+       /* Try and raise the rqsize */
+       if (!is_sata(hwif) || !is_dev_seagate_sata(&hwif->drives[0]))
+               hwif->rqsize = 128;
+}
+
 /**
  *     init_iops_siimage       -       set up iops
  *     @hwif: interface to set up
@@ -1007,9 +990,8 @@ static void __devinit init_iops_siimage(ide_hwif_t *hwif)
        
        hwif->hwif_data = NULL;
 
-       hwif->rqsize = 128;
-       if (is_sata(hwif) && is_dev_seagate_sata(&hwif->drives[0]))
-               hwif->rqsize = 15;
+       /* Pessimal until we finish probing */
+       hwif->rqsize = 15;
 
        if (pci_get_drvdata(dev) == NULL)
                return;
@@ -1077,7 +1059,6 @@ static void __devinit init_hwif_siimage(ide_hwif_t *hwif)
 
        if (hwif->mmio) {
                hwif->ide_dma_test_irq = &siimage_mmio_ide_dma_test_irq;
-               hwif->ide_dma_verbose = &siimage_mmio_ide_dma_verbose;
        } else {
                hwif->ide_dma_test_irq = & siimage_io_ide_dma_test_irq;
        }
@@ -1098,6 +1079,7 @@ static void __devinit init_hwif_siimage(ide_hwif_t *hwif)
                .init_chipset   = init_chipset_siimage, \
                .init_iops      = init_iops_siimage,    \
                .init_hwif      = init_hwif_siimage,    \
+               .fixup          = siimage_fixup,        \
                .channels       = 2,                    \
                .autodma        = AUTODMA,              \
                .bootable       = ON_BOARD,             \
@@ -1120,8 +1102,7 @@ static ide_pci_device_t siimage_chipsets[] __devinitdata = {
  
 static int __devinit siimage_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 {
-       ide_setup_pci_device(dev, &siimage_chipsets[id->driver_data]);
-       return 0;
+       return ide_setup_pci_device(dev, &siimage_chipsets[id->driver_data]);
 }
 
 static struct pci_device_id siimage_pci_tbl[] = {