#include <asm/io.h>
-#define DISPLAY_SLC90E66_TIMINGS
-
-#if defined(DISPLAY_SLC90E66_TIMINGS) && defined(CONFIG_PROC_FS)
-#include <linux/stat.h>
-#include <linux/proc_fs.h>
-
-static u8 slc90e66_proc = 0;
-static struct pci_dev *bmide_dev;
-
-static int slc90e66_get_info (char *buffer, char **addr, off_t offset, int count)
-{
- char *p = buffer;
- int len;
- unsigned long bibma = pci_resource_start(bmide_dev, 4);
- u16 reg40 = 0, psitre = 0, reg42 = 0, ssitre = 0;
- u8 c0 = 0, c1 = 0;
- u8 reg44 = 0, reg47 = 0, reg48 = 0, reg4a = 0, reg4b = 0;
-
- pci_read_config_word(bmide_dev, 0x40, ®40);
- pci_read_config_word(bmide_dev, 0x42, ®42);
- pci_read_config_byte(bmide_dev, 0x44, ®44);
- pci_read_config_byte(bmide_dev, 0x47, ®47);
- pci_read_config_byte(bmide_dev, 0x48, ®48);
- pci_read_config_byte(bmide_dev, 0x4a, ®4a);
- pci_read_config_byte(bmide_dev, 0x4b, ®4b);
-
- psitre = (reg40 & 0x4000) ? 1 : 0;
- ssitre = (reg42 & 0x4000) ? 1 : 0;
-
- /*
- * at that point bibma+0x2 et bibma+0xa are byte registers
- * to investigate:
- */
- c0 = inb_p(bibma + 0x02);
- c1 = inb_p(bibma + 0x0a);
-
- p += sprintf(p, " SLC90E66 Chipset.\n");
- p += sprintf(p, "--------------- Primary Channel "
- "---------------- Secondary Channel "
- "-------------\n");
- p += sprintf(p, " %sabled "
- " %sabled\n",
- (c0&0x80) ? "dis" : " en",
- (c1&0x80) ? "dis" : " en");
- p += sprintf(p, "--------------- drive0 --------- drive1 "
- "-------- drive0 ---------- drive1 ------\n");
- p += sprintf(p, "DMA enabled: %s %s "
- " %s %s\n",
- (c0&0x20) ? "yes" : "no ",
- (c0&0x40) ? "yes" : "no ",
- (c1&0x20) ? "yes" : "no ",
- (c1&0x40) ? "yes" : "no " );
- p += sprintf(p, "UDMA enabled: %s %s "
- " %s %s\n",
- (reg48&0x01) ? "yes" : "no ",
- (reg48&0x02) ? "yes" : "no ",
- (reg48&0x04) ? "yes" : "no ",
- (reg48&0x08) ? "yes" : "no " );
- p += sprintf(p, "UDMA enabled: %s %s "
- " %s %s\n",
- ((reg4a&0x04)==0x04) ? "4" :
- ((reg4a&0x03)==0x03) ? "3" :
- (reg4a&0x02) ? "2" :
- (reg4a&0x01) ? "1" :
- (reg4a&0x00) ? "0" : "X",
- ((reg4a&0x40)==0x40) ? "4" :
- ((reg4a&0x30)==0x30) ? "3" :
- (reg4a&0x20) ? "2" :
- (reg4a&0x10) ? "1" :
- (reg4a&0x00) ? "0" : "X",
- ((reg4b&0x04)==0x04) ? "4" :
- ((reg4b&0x03)==0x03) ? "3" :
- (reg4b&0x02) ? "2" :
- (reg4b&0x01) ? "1" :
- (reg4b&0x00) ? "0" : "X",
- ((reg4b&0x40)==0x40) ? "4" :
- ((reg4b&0x30)==0x30) ? "3" :
- (reg4b&0x20) ? "2" :
- (reg4b&0x10) ? "1" :
- (reg4b&0x00) ? "0" : "X");
-
- p += sprintf(p, "UDMA\n");
- p += sprintf(p, "DMA\n");
- p += sprintf(p, "PIO\n");
-
-/*
- * FIXME.... Add configuration junk data....blah blah......
- */
-
- /* p - buffer must be less than 4k! */
- len = (p - buffer) - offset;
- *addr = buffer + offset;
-
- return len > count ? count : len;
-}
-#endif /* defined(DISPLAY_SLC90E66_TIMINGS) && defined(CONFIG_PROC_FS) */
-
static u8 slc90e66_ratemask (ide_drive_t *drive)
{
u8 mode = 2;
if (speed >= XFER_UDMA_0) {
if (!(reg48 & u_flag))
pci_write_config_word(dev, 0x48, reg48|u_flag);
+ /* FIXME: (reg4a & a_speed) ? */
if ((reg4a & u_speed) != u_speed) {
pci_write_config_word(dev, 0x4a, reg4a & ~a_speed);
pci_read_config_word(dev, 0x4a, ®4a);
drive->init_speed = 0;
if (id && (id->capability & 1) && drive->autodma) {
- /* Consult the list of known "bad" drives */
- if (__ide_dma_bad_drive(drive))
- goto fast_ata_pio;
-
- if (id->field_valid & 4) {
- if (id->dma_ultra & hwif->ultra_mask) {
- /* Force if Capable UltraDMA */
- int dma = slc90e66_config_drive_for_dma(drive);
- if ((id->field_valid & 2) && !dma)
- goto try_dma_modes;
- }
- } else if (id->field_valid & 2) {
-try_dma_modes:
- if ((id->dma_mword & hwif->mwdma_mask) ||
- (id->dma_1word & hwif->swdma_mask)) {
- /* Force if Capable regular DMA modes */
- if (!slc90e66_config_drive_for_dma(drive))
- goto no_dma_set;
- }
- } else if (__ide_dma_good_drive(drive) &&
- (id->eide_dma_time < 150)) {
- /* Consult the list of known "good" drives */
- if (!slc90e66_config_drive_for_dma(drive))
- goto no_dma_set;
- } else {
- goto fast_ata_pio;
+
+ if (ide_use_dma(drive)) {
+ if (slc90e66_config_drive_for_dma(drive))
+ return hwif->ide_dma_on(drive);
}
- return hwif->ide_dma_on(drive);
+
+ goto fast_ata_pio;
+
} else if ((id->capability & 8) || (id->field_valid & 2)) {
fast_ata_pio:
-no_dma_set:
hwif->tuneproc(drive, 5);
return hwif->ide_dma_off_quietly(drive);
}
}
#endif /* CONFIG_BLK_DEV_IDEDMA */
-static unsigned int __init init_chipset_slc90e66 (struct pci_dev *dev, const char *name)
-{
-#if defined(DISPLAY_SLC90E66_TIMINGS) && defined(CONFIG_PROC_FS)
- if (!slc90e66_proc) {
- slc90e66_proc = 1;
- bmide_dev = dev;
- ide_pci_create_host_proc("slc90e66", slc90e66_get_info);
- }
-#endif /* DISPLAY_SLC90E66_TIMINGS && CONFIG_PROC_FS */
- return 0;
-}
-
static void __init init_hwif_slc90e66 (ide_hwif_t *hwif)
{
u8 reg47 = 0;
static ide_pci_device_t slc90e66_chipset __devinitdata = {
.name = "SLC90E66",
- .init_chipset = init_chipset_slc90e66,
.init_hwif = init_hwif_slc90e66,
.channels = 2,
.autodma = AUTODMA,
static int __devinit slc90e66_init_one(struct pci_dev *dev, const struct pci_device_id *id)
{
- ide_setup_pci_device(dev, &slc90e66_chipset);
- return 0;
+ return ide_setup_pci_device(dev, &slc90e66_chipset);
}
static struct pci_device_id slc90e66_pci_tbl[] = {
git://git.onelab.eu / linux-2.6.git / blobdiff