u8 rev_max;
u16 flags;
} via_isa_bridges[] = {
+ { "vt6410", PCI_DEVICE_ID_VIA_6410, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST },
+ { "vt8251", PCI_DEVICE_ID_VIA_8251, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST },
{ "vt8237", PCI_DEVICE_ID_VIA_8237, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST },
{ "vt8235", PCI_DEVICE_ID_VIA_8235, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST },
{ "vt8233a", PCI_DEVICE_ID_VIA_8233A, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST },
{ NULL }
};
-static struct via_isa_bridge *via_config;
-static unsigned int via_80w;
static unsigned int via_clock;
static char *via_dma[] = { "MWDMA16", "UDMA33", "UDMA66", "UDMA100", "UDMA133" };
-/*
- * VIA /proc entry.
- */
-
-#if defined(DISPLAY_VIA_TIMINGS) && defined(CONFIG_PROC_FS)
-
-#include <linux/stat.h>
-#include <linux/proc_fs.h>
-
-static u8 via_proc = 0;
-static unsigned long via_base;
-static struct pci_dev *bmide_dev, *isa_dev;
-
-static char *via_control3[] = { "No limit", "64", "128", "192" };
-
-#define via_print(format, arg...) p += sprintf(p, format "\n" , ## arg)
-#define via_print_drive(name, format, arg...)\
- p += sprintf(p, name); for (i = 0; i < 4; i++) p += sprintf(p, format, ## arg); p += sprintf(p, "\n");
-
-
-/**
- * via_get_info - generate via /proc file
- * @buffer: buffer for data
- * @addr: set to start of data to use
- * @offset: current file offset
- * @count: size of read
- *
- * Fills in buffer with the debugging/configuration information for
- * the VIA chipset tuning and attached drives
- */
-
-static int via_get_info(char *buffer, char **addr, off_t offset, int count)
+struct via82cxxx_dev
{
- int speed[4], cycle[4], setup[4], active[4], recover[4], den[4],
- uen[4], udma[4], umul[4], active8b[4], recover8b[4];
- struct pci_dev *dev = bmide_dev;
- unsigned int v, u, i;
- int len;
- u16 c, w;
- u8 t, x;
- char *p = buffer;
-
- via_print("----------VIA BusMastering IDE Configuration"
- "----------------");
-
- via_print("Driver Version: 3.38");
- via_print("South Bridge: VIA %s",
- via_config->name);
-
- pci_read_config_byte(isa_dev, PCI_REVISION_ID, &t);
- pci_read_config_byte(dev, PCI_REVISION_ID, &x);
- via_print("Revision: ISA %#x IDE %#x", t, x);
- via_print("Highest DMA rate: %s",
- via_dma[via_config->flags & VIA_UDMA]);
-
- via_print("BM-DMA base: %#lx", via_base);
- via_print("PCI clock: %d.%dMHz",
- via_clock / 1000, via_clock / 100 % 10);
-
- pci_read_config_byte(dev, VIA_MISC_1, &t);
- via_print("Master Read Cycle IRDY: %dws",
- (t & 64) >> 6);
- via_print("Master Write Cycle IRDY: %dws",
- (t & 32) >> 5);
- via_print("BM IDE Status Register Read Retry: %s",
- (t & 8) ? "yes" : "no");
-
- pci_read_config_byte(dev, VIA_MISC_3, &t);
- via_print("Max DRDY Pulse Width: %s%s",
- via_control3[(t & 0x03)], (t & 0x03) ? " PCI clocks" : "");
-
- via_print("-----------------------Primary IDE"
- "-------Secondary IDE------");
- via_print("Read DMA FIFO flush: %10s%20s",
- (t & 0x80) ? "yes" : "no", (t & 0x40) ? "yes" : "no");
- via_print("End Sector FIFO flush: %10s%20s",
- (t & 0x20) ? "yes" : "no", (t & 0x10) ? "yes" : "no");
-
- pci_read_config_byte(dev, VIA_IDE_CONFIG, &t);
- via_print("Prefetch Buffer: %10s%20s",
- (t & 0x80) ? "yes" : "no", (t & 0x20) ? "yes" : "no");
- via_print("Post Write Buffer: %10s%20s",
- (t & 0x40) ? "yes" : "no", (t & 0x10) ? "yes" : "no");
-
- pci_read_config_byte(dev, VIA_IDE_ENABLE, &t);
- via_print("Enabled: %10s%20s",
- (t & 0x02) ? "yes" : "no", (t & 0x01) ? "yes" : "no");
-
- c = inb(via_base + 0x02) | (inb(via_base + 0x0a) << 8);
- via_print("Simplex only: %10s%20s",
- (c & 0x80) ? "yes" : "no", (c & 0x8000) ? "yes" : "no");
-
- via_print("Cable Type: %10s%20s",
- (via_80w & 1) ? "80w" : "40w", (via_80w & 2) ? "80w" : "40w");
-
- via_print("-------------------drive0----drive1"
- "----drive2----drive3-----");
-
- pci_read_config_byte(dev, VIA_ADDRESS_SETUP, &t);
- pci_read_config_dword(dev, VIA_DRIVE_TIMING, &v);
- pci_read_config_word(dev, VIA_8BIT_TIMING, &w);
-
- if (via_config->flags & VIA_UDMA)
- pci_read_config_dword(dev, VIA_UDMA_TIMING, &u);
- else u = 0;
-
- for (i = 0; i < 4; i++) {
-
- setup[i] = ((t >> ((3 - i) << 1)) & 0x3) + 1;
- recover8b[i] = ((w >> ((1 - (i >> 1)) << 3)) & 0xf) + 1;
- active8b[i] = ((w >> (((1 - (i >> 1)) << 3) + 4)) & 0xf) + 1;
- active[i] = ((v >> (((3 - i) << 3) + 4)) & 0xf) + 1;
- recover[i] = ((v >> ((3 - i) << 3)) & 0xf) + 1;
- udma[i] = ((u >> ((3 - i) << 3)) & 0x7) + 2;
- umul[i] = ((u >> (((3 - i) & 2) << 3)) & 0x8) ? 1 : 2;
- uen[i] = ((u >> ((3 - i) << 3)) & 0x20);
- den[i] = (c & ((i & 1) ? 0x40 : 0x20) << ((i & 2) << 2));
-
- speed[i] = 2 * via_clock / (active[i] + recover[i]);
- cycle[i] = 1000000 * (active[i] + recover[i]) / via_clock;
-
- if (!uen[i] || !den[i])
- continue;
-
- switch (via_config->flags & VIA_UDMA) {
-
- case VIA_UDMA_33:
- speed[i] = 2 * via_clock / udma[i];
- cycle[i] = 1000000 * udma[i] / via_clock;
- break;
-
- case VIA_UDMA_66:
- speed[i] = 4 * via_clock / (udma[i] * umul[i]);
- cycle[i] = 500000 * (udma[i] * umul[i]) / via_clock;
- break;
-
- case VIA_UDMA_100:
- speed[i] = 6 * via_clock / udma[i];
- cycle[i] = 333333 * udma[i] / via_clock;
- break;
-
- case VIA_UDMA_133:
- speed[i] = 8 * via_clock / udma[i];
- cycle[i] = 250000 * udma[i] / via_clock;
- break;
- }
- }
-
- via_print_drive("Transfer Mode: ", "%10s",
- den[i] ? (uen[i] ? "UDMA" : "DMA") : "PIO");
-
- via_print_drive("Address Setup: ", "%8dns",
- 1000000 * setup[i] / via_clock);
- via_print_drive("Cmd Active: ", "%8dns",
- 1000000 * active8b[i] / via_clock);
- via_print_drive("Cmd Recovery: ", "%8dns",
- 1000000 * recover8b[i] / via_clock);
- via_print_drive("Data Active: ", "%8dns",
- 1000000 * active[i] / via_clock);
- via_print_drive("Data Recovery: ", "%8dns",
- 1000000 * recover[i] / via_clock);
- via_print_drive("Cycle Time: ", "%8dns",
- cycle[i]);
- via_print_drive("Transfer Rate: ", "%4d.%dMB/s",
- speed[i] / 1000, speed[i] / 100 % 10);
-
- /* hoping it is less than 4K... */
- len = (p - buffer) - offset;
- *addr = buffer + offset;
-
- return len > count ? count : len;
-}
-
-#endif /* DISPLAY_VIA_TIMINGS && CONFIG_PROC_FS */
+ struct via_isa_bridge *via_config;
+ unsigned int via_80w;
+};
/**
* via_set_speed - write timing registers
* via_set_speed writes timing values to the chipset registers
*/
-static void via_set_speed(struct pci_dev *dev, u8 dn, struct ide_timing *timing)
+static void via_set_speed(ide_hwif_t *hwif, u8 dn, struct ide_timing *timing)
{
+ struct pci_dev *dev = hwif->pci_dev;
+ struct via82cxxx_dev *vdev = ide_get_hwifdata(hwif);
u8 t;
- if (~via_config->flags & VIA_BAD_AST) {
+ if (~vdev->via_config->flags & VIA_BAD_AST) {
pci_read_config_byte(dev, VIA_ADDRESS_SETUP, &t);
t = (t & ~(3 << ((3 - dn) << 1))) | ((FIT(timing->setup, 1, 4) - 1) << ((3 - dn) << 1));
pci_write_config_byte(dev, VIA_ADDRESS_SETUP, t);
pci_write_config_byte(dev, VIA_DRIVE_TIMING + (3 - dn),
((FIT(timing->active, 1, 16) - 1) << 4) | (FIT(timing->recover, 1, 16) - 1));
- switch (via_config->flags & VIA_UDMA) {
+ switch (vdev->via_config->flags & VIA_UDMA) {
case VIA_UDMA_33: t = timing->udma ? (0xe0 | (FIT(timing->udma, 2, 5) - 2)) : 0x03; break;
case VIA_UDMA_66: t = timing->udma ? (0xe8 | (FIT(timing->udma, 2, 9) - 2)) : 0x0f; break;
case VIA_UDMA_100: t = timing->udma ? (0xe0 | (FIT(timing->udma, 2, 9) - 2)) : 0x07; break;
static int via_set_drive(ide_drive_t *drive, u8 speed)
{
ide_drive_t *peer = HWIF(drive)->drives + (~drive->dn & 1);
+ struct via82cxxx_dev *vdev = ide_get_hwifdata(drive->hwif);
struct ide_timing t, p;
unsigned int T, UT;
T = 1000000000 / via_clock;
- switch (via_config->flags & VIA_UDMA) {
+ switch (vdev->via_config->flags & VIA_UDMA) {
case VIA_UDMA_33: UT = T; break;
case VIA_UDMA_66: UT = T/2; break;
case VIA_UDMA_100: UT = T/3; break;
ide_timing_merge(&p, &t, &t, IDE_TIMING_8BIT);
}
- via_set_speed(HWIF(drive)->pci_dev, drive->dn, &t);
+ via_set_speed(HWIF(drive), drive->dn, &t);
if (!drive->init_speed)
drive->init_speed = speed;
static int via82cxxx_ide_dma_check (ide_drive_t *drive)
{
- u16 w80 = HWIF(drive)->udma_four;
+ ide_hwif_t *hwif = HWIF(drive);
+ struct via82cxxx_dev *vdev = ide_get_hwifdata(hwif);
+ u16 w80 = hwif->udma_four;
u16 speed = ide_find_best_mode(drive,
XFER_PIO | XFER_EPIO | XFER_SWDMA | XFER_MWDMA |
- (via_config->flags & VIA_UDMA ? XFER_UDMA : 0) |
- (w80 && (via_config->flags & VIA_UDMA) >= VIA_UDMA_66 ? XFER_UDMA_66 : 0) |
- (w80 && (via_config->flags & VIA_UDMA) >= VIA_UDMA_100 ? XFER_UDMA_100 : 0) |
- (w80 && (via_config->flags & VIA_UDMA) >= VIA_UDMA_133 ? XFER_UDMA_133 : 0));
+ (vdev->via_config->flags & VIA_UDMA ? XFER_UDMA : 0) |
+ (w80 && (vdev->via_config->flags & VIA_UDMA) >= VIA_UDMA_66 ? XFER_UDMA_66 : 0) |
+ (w80 && (vdev->via_config->flags & VIA_UDMA) >= VIA_UDMA_100 ? XFER_UDMA_100 : 0) |
+ (w80 && (vdev->via_config->flags & VIA_UDMA) >= VIA_UDMA_133 ? XFER_UDMA_133 : 0));
via_set_drive(drive, speed);
if (drive->autodma && (speed & XFER_MODE) != XFER_PIO)
- return HWIF(drive)->ide_dma_on(drive);
- return HWIF(drive)->ide_dma_off_quietly(drive);
+ return hwif->ide_dma_on(drive);
+ return hwif->ide_dma_off_quietly(drive);
+}
+
+static struct via_isa_bridge *via_config_find(struct pci_dev **isa)
+{
+ struct via_isa_bridge *via_config;
+ u8 t;
+
+ for (via_config = via_isa_bridges; via_config->id; via_config++)
+ if ((*isa = pci_find_device(PCI_VENDOR_ID_VIA +
+ !!(via_config->flags & VIA_BAD_ID),
+ via_config->id, NULL))) {
+
+ pci_read_config_byte(*isa, PCI_REVISION_ID, &t);
+ if (t >= via_config->rev_min &&
+ t <= via_config->rev_max)
+ break;
+ }
+
+ return via_config;
}
/**
* and initialize its drive independent registers.
*/
-static unsigned int __init init_chipset_via82cxxx(struct pci_dev *dev, const char *name)
+static unsigned int __devinit init_chipset_via82cxxx(struct pci_dev *dev, const char *name)
{
struct pci_dev *isa = NULL;
+ struct via_isa_bridge *via_config;
u8 t, v;
unsigned int u;
- int i;
/*
* Find the ISA bridge to see how good the IDE is.
*/
-
- for (via_config = via_isa_bridges; via_config->id; via_config++)
- if ((isa = pci_find_device(PCI_VENDOR_ID_VIA +
- !!(via_config->flags & VIA_BAD_ID),
- via_config->id, NULL))) {
-
- pci_read_config_byte(isa, PCI_REVISION_ID, &t);
- if (t >= via_config->rev_min &&
- t <= via_config->rev_max)
- break;
- }
-
+ via_config = via_config_find(&isa);
if (!via_config->id) {
printk(KERN_WARNING "VP_IDE: Unknown VIA SouthBridge, disabling DMA.\n");
return -ENODEV;
}
/*
- * Check 80-wire cable presence and setup Clk66.
+ * Setup or disable Clk66 if appropriate
*/
- switch (via_config->flags & VIA_UDMA) {
-
- case VIA_UDMA_66:
- /* Enable Clk66 */
- pci_read_config_dword(dev, VIA_UDMA_TIMING, &u);
- pci_write_config_dword(dev, VIA_UDMA_TIMING, u|0x80008);
- for (i = 24; i >= 0; i -= 8)
- if (((u >> (i & 16)) & 8) &&
- ((u >> i) & 0x20) &&
- (((u >> i) & 7) < 2)) {
- /*
- * 2x PCI clock and
- * UDMA w/ < 3T/cycle
- */
- via_80w |= (1 << (1 - (i >> 4)));
- }
- break;
-
- case VIA_UDMA_100:
- pci_read_config_dword(dev, VIA_UDMA_TIMING, &u);
- for (i = 24; i >= 0; i -= 8)
- if (((u >> i) & 0x10) ||
- (((u >> i) & 0x20) &&
- (((u >> i) & 7) < 4))) {
- /* BIOS 80-wire bit or
- * UDMA w/ < 60ns/cycle
- */
- via_80w |= (1 << (1 - (i >> 4)));
- }
- break;
-
- case VIA_UDMA_133:
- pci_read_config_dword(dev, VIA_UDMA_TIMING, &u);
- for (i = 24; i >= 0; i -= 8)
- if (((u >> i) & 0x10) ||
- (((u >> i) & 0x20) &&
- (((u >> i) & 7) < 6))) {
- /* BIOS 80-wire bit or
- * UDMA w/ < 60ns/cycle
- */
- via_80w |= (1 << (1 - (i >> 4)));
- }
- break;
-
- }
-
- /* Disable Clk66 */
- if (via_config->flags & VIA_BAD_CLK66) {
+ if ((via_config->flags & VIA_UDMA) == VIA_UDMA_66) {
+ /* Enable Clk66 */
+ pci_read_config_dword(dev, VIA_UDMA_TIMING, &u);
+ pci_write_config_dword(dev, VIA_UDMA_TIMING, u|0x80008);
+ } else if (via_config->flags & VIA_BAD_CLK66) {
/* Would cause trouble on 596a and 686 */
pci_read_config_dword(dev, VIA_UDMA_TIMING, &u);
pci_write_config_dword(dev, VIA_UDMA_TIMING, u & ~0x80008);
via_dma[via_config->flags & VIA_UDMA],
pci_name(dev));
- /*
- * Setup /proc/ide/via entry.
- */
+ return 0;
+}
+
+/*
+ * Check and handle 80-wire cable presence
+ */
+static void __devinit via_cable_detect(struct pci_dev *dev, struct via82cxxx_dev *vdev)
+{
+ unsigned int u;
+ int i;
+ pci_read_config_dword(dev, VIA_UDMA_TIMING, &u);
+
+ switch (vdev->via_config->flags & VIA_UDMA) {
+
+ case VIA_UDMA_66:
+ for (i = 24; i >= 0; i -= 8)
+ if (((u >> (i & 16)) & 8) &&
+ ((u >> i) & 0x20) &&
+ (((u >> i) & 7) < 2)) {
+ /*
+ * 2x PCI clock and
+ * UDMA w/ < 3T/cycle
+ */
+ vdev->via_80w |= (1 << (1 - (i >> 4)));
+ }
+ break;
+
+ case VIA_UDMA_100:
+ for (i = 24; i >= 0; i -= 8)
+ if (((u >> i) & 0x10) ||
+ (((u >> i) & 0x20) &&
+ (((u >> i) & 7) < 4))) {
+ /* BIOS 80-wire bit or
+ * UDMA w/ < 60ns/cycle
+ */
+ vdev->via_80w |= (1 << (1 - (i >> 4)));
+ }
+ break;
+
+ case VIA_UDMA_133:
+ for (i = 24; i >= 0; i -= 8)
+ if (((u >> i) & 0x10) ||
+ (((u >> i) & 0x20) &&
+ (((u >> i) & 7) < 6))) {
+ /* BIOS 80-wire bit or
+ * UDMA w/ < 60ns/cycle
+ */
+ vdev->via_80w |= (1 << (1 - (i >> 4)));
+ }
+ break;
-#if defined(DISPLAY_VIA_TIMINGS) && defined(CONFIG_PROC_FS)
- if (!via_proc) {
- via_base = pci_resource_start(dev, 4);
- bmide_dev = dev;
- isa_dev = isa;
- ide_pci_create_host_proc("via", via_get_info);
- via_proc = 1;
}
-#endif /* DISPLAY_VIA_TIMINGS && CONFIG_PROC_FS */
- return 0;
}
-static void __init init_hwif_via82cxxx(ide_hwif_t *hwif)
+static void __devinit init_hwif_via82cxxx(ide_hwif_t *hwif)
{
+ struct via82cxxx_dev *vdev = kmalloc(sizeof(struct via82cxxx_dev),
+ GFP_KERNEL);
+ struct pci_dev *isa = NULL;
int i;
+ if (vdev == NULL) {
+ printk(KERN_ERR "VP_IDE: out of memory :(\n");
+ return;
+ }
+
+ memset(vdev, 0, sizeof(struct via82cxxx_dev));
+ ide_set_hwifdata(hwif, vdev);
+
+ vdev->via_config = via_config_find(&isa);
+ via_cable_detect(hwif->pci_dev, vdev);
+
hwif->autodma = 0;
hwif->tuneproc = &via82cxxx_tune_drive;
hwif->speedproc = &via_set_drive;
-#if defined(CONFIG_PPC_MULTIPLATFORM) && defined(CONFIG_PPC32)
- if(_machine == _MACH_chrp && _chrp_type == _CHRP_Pegasos) {
+#if defined(CONFIG_PPC_CHRP) && defined(CONFIG_PPC32)
+ if(machine_is(chrp) && _chrp_type == _CHRP_Pegasos) {
hwif->irq = hwif->channel ? 15 : 14;
}
#endif
for (i = 0; i < 2; i++) {
hwif->drives[i].io_32bit = 1;
- hwif->drives[i].unmask = (via_config->flags & VIA_NO_UNMASK) ? 0 : 1;
+ hwif->drives[i].unmask = (vdev->via_config->flags & VIA_NO_UNMASK) ? 0 : 1;
hwif->drives[i].autotune = 1;
hwif->drives[i].dn = hwif->channel * 2 + i;
}
hwif->swdma_mask = 0x07;
if (!hwif->udma_four)
- hwif->udma_four = (via_80w >> hwif->channel) & 1;
+ hwif->udma_four = (vdev->via_80w >> hwif->channel) & 1;
hwif->ide_dma_check = &via82cxxx_ide_dma_check;
if (!noautodma)
hwif->autodma = 1;
hwif->drives[1].autodma = hwif->autodma;
}
-static ide_pci_device_t via82cxxx_chipset __devinitdata = {
- .name = "VP_IDE",
- .init_chipset = init_chipset_via82cxxx,
- .init_hwif = init_hwif_via82cxxx,
- .channels = 2,
- .autodma = NOAUTODMA,
- .enablebits = {{0x40,0x02,0x02}, {0x40,0x01,0x01}},
- .bootable = ON_BOARD,
+static ide_pci_device_t via82cxxx_chipsets[] __devinitdata = {
+ { /* 0 */
+ .name = "VP_IDE",
+ .init_chipset = init_chipset_via82cxxx,
+ .init_hwif = init_hwif_via82cxxx,
+ .channels = 2,
+ .autodma = NOAUTODMA,
+ .enablebits = {{0x40,0x02,0x02}, {0x40,0x01,0x01}},
+ .bootable = ON_BOARD
+ },{ /* 1 */
+ .name = "VP_IDE",
+ .init_chipset = init_chipset_via82cxxx,
+ .init_hwif = init_hwif_via82cxxx,
+ .channels = 2,
+ .autodma = AUTODMA,
+ .enablebits = {{0x00,0x00,0x00}, {0x00,0x00,0x00}},
+ .bootable = ON_BOARD,
+ }
};
static int __devinit via_init_one(struct pci_dev *dev, const struct pci_device_id *id)
{
- return ide_setup_pci_device(dev, &via82cxxx_chipset);
+ return ide_setup_pci_device(dev, &via82cxxx_chipsets[id->driver_data]);
}
static struct pci_device_id via_pci_tbl[] = {
{ PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C576_1, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
{ PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_1, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
+ { PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_6410, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 1},
{ 0, },
};
MODULE_DEVICE_TABLE(pci, via_pci_tbl);
git://git.onelab.eu / linux-2.6.git / blobdiff