#define PRINT(level, fmt, args...) \
printk(level "%s: fw-host%d: " fmt "\n" , OHCI1394_DRIVER_NAME, ohci->host->id , ## args)
-static char version[] __devinitdata =
- "$Rev: 1250 $ Ben Collins <bcollins@debian.org>";
-
/* Module Parameters */
static int phys_dma = 1;
module_param(phys_dma, int, 0644);
int num_ports, i;
spin_lock_init(&ohci->phy_reg_lock);
- spin_lock_init(&ohci->event_lock);
/* Put some defaults to these undefined bus options */
buf = reg_read(ohci, OHCI1394_BusOptions);
buf |= 0x60000000; /* Enable CMC and ISC */
- if (!hpsb_disable_irm)
+ if (hpsb_disable_irm)
+ buf &= ~0x80000000;
+ else
buf |= 0x80000000; /* Enable IRMC */
buf &= ~0x00ff0000; /* XXX: Set cyc_clk_acc to zero for now */
buf &= ~0x18000000; /* Disable PMC and BMC */
reg_write(ohci, OHCI1394_LinkControlSet,
OHCI1394_LinkControl_CycleTimerEnable |
OHCI1394_LinkControl_CycleMaster);
- set_phy_reg_mask(ohci, 4, PHY_04_LCTRL |
- (hpsb_disable_irm ? 0 : PHY_04_CONTENDER));
+ i = get_phy_reg(ohci, 4) | PHY_04_LCTRL;
+ if (hpsb_disable_irm)
+ i &= ~PHY_04_CONTENDER;
+ else
+ i |= PHY_04_CONTENDER;
+ set_phy_reg(ohci, 4, i);
/* Set up self-id dma buffer */
reg_write(ohci, OHCI1394_SelfIDBuffer, ohci->selfid_buf_bus);
/* Initialize IR Legacy DMA channel mask */
ohci->ir_legacy_channels = 0;
- /*
- * Accept AT requests from all nodes. This probably
- * will have to be controlled from the subsystem
- * on a per node basis.
- */
- reg_write(ohci,OHCI1394_AsReqFilterHiSet, 0x80000000);
+ /* Accept AR requests from all nodes */
+ reg_write(ohci, OHCI1394_AsReqFilterHiSet, 0x80000000);
+
+ /* Set the address range of the physical response unit.
+ * Most controllers do not implement it as a writable register though.
+ * They will keep a hardwired offset of 0x00010000 and show 0x0 as
+ * register content.
+ * To actually enable physical responses is the job of our interrupt
+ * handler which programs the physical request filter. */
+ reg_write(ohci, OHCI1394_PhyUpperBound, 0x01000000);
+
+ DBGMSG("physUpperBoundOffset=%08x",
+ reg_read(ohci, OHCI1394_PhyUpperBound));
/* Specify AT retries */
reg_write(ohci, OHCI1394_ATRetries,
OHCI1394_reqTxComplete |
OHCI1394_isochRx |
OHCI1394_isochTx |
+ OHCI1394_postedWriteErr |
OHCI1394_cycleInconsistent);
/* Enable link */
sprintf (irq_buf, "%s", __irq_itoa(ohci->dev->irq));
#endif
PRINT(KERN_INFO, "OHCI-1394 %d.%d (PCI): IRQ=[%s] "
- "MMIO=[%lx-%lx] Max Packet=[%d]",
+ "MMIO=[%lx-%lx] Max Packet=[%d] IR/IT contexts=[%d/%d]",
((((buf) >> 16) & 0xf) + (((buf) >> 20) & 0xf) * 10),
((((buf) >> 4) & 0xf) + ((buf) & 0xf) * 10), irq_buf,
pci_resource_start(ohci->dev, 0),
pci_resource_start(ohci->dev, 0) + OHCI1394_REGISTER_SIZE - 1,
- ohci->max_packet_size);
+ ohci->max_packet_size,
+ ohci->nb_iso_rcv_ctx, ohci->nb_iso_xmit_ctx);
/* Check all of our ports to make sure that if anything is
* connected, we enable that port. */
initialize_dma_rcv_ctx(&ohci->ir_legacy_context, 1);
- PRINT(KERN_ERR, "IR legacy activated");
+ if (printk_ratelimit())
+ DBGMSG("IR legacy activated");
}
spin_lock_irqsave(&ohci->IR_channel_lock, flags);
struct dma_cmd *next = &recv->block[next_i];
struct dma_cmd *prev = &recv->block[prev_i];
+
+ /* ignore out-of-range requests */
+ if ((block < 0) || (block > recv->nblocks))
+ return;
/* 'next' becomes the new end of the DMA chain,
so disable branch and enable interrupt */
static void ohci_iso_recv_bufferfill_release(struct ohci_iso_recv *recv,
struct hpsb_iso_packet_info *info)
{
- int len;
-
/* release the memory where the packet was */
- len = info->len;
-
- /* add the wasted space for padding to 4 bytes */
- if (len % 4)
- len += 4 - (len % 4);
-
- /* add 8 bytes for the OHCI DMA data format overhead */
- len += 8;
-
- recv->released_bytes += len;
+ recv->released_bytes += info->total_len;
/* have we released enough memory for one block? */
while (recv->released_bytes > recv->buf_stride) {
/* note: packet layout is as shown in section 10.6.1.1 of the OHCI spec */
unsigned int offset;
- unsigned short len, cycle;
+ unsigned short len, cycle, total_len;
unsigned char channel, tag, sy;
unsigned char *p = iso->data_buf.kvirt;
/* advance to xferStatus/timeStamp */
recv->dma_offset += len;
+ total_len = len + 8; /* 8 bytes header+trailer in OHCI packet */
/* payload is padded to 4 bytes */
if (len % 4) {
recv->dma_offset += 4 - (len%4);
+ total_len += 4 - (len%4);
}
/* check for wrap-around */
recv->dma_offset -= recv->buf_stride*recv->nblocks;
}
- hpsb_iso_packet_received(iso, offset, len, cycle, channel, tag, sy);
+ hpsb_iso_packet_received(iso, offset, len, total_len, cycle, channel, tag, sy);
}
if (wake)
tag = hdr[5] >> 6;
sy = hdr[4] & 0xF;
- hpsb_iso_packet_received(iso, offset, packet_len, cycle, channel, tag, sy);
+ hpsb_iso_packet_received(iso, offset, packet_len,
+ recv->buf_stride, cycle, channel, tag, sy);
}
/* reset the DMA descriptor */
{
struct ohci1394_iso_tasklet *t;
unsigned long mask;
+ unsigned long flags;
- spin_lock(&ohci->iso_tasklet_list_lock);
+ spin_lock_irqsave(&ohci->iso_tasklet_list_lock, flags);
list_for_each_entry(t, &ohci->iso_tasklet_list, link) {
mask = 1 << t->context;
tasklet_schedule(&t->tasklet);
}
- spin_unlock(&ohci->iso_tasklet_list_lock);
-
+ spin_unlock_irqrestore(&ohci->iso_tasklet_list_lock, flags);
}
static irqreturn_t ohci_irq_handler(int irq, void *dev_id,
event &= ~OHCI1394_unrecoverableError;
}
-
+ if (event & OHCI1394_postedWriteErr) {
+ PRINT(KERN_ERR, "physical posted write error");
+ /* no recovery strategy yet, had to involve protocol drivers */
+ }
if (event & OHCI1394_cycleInconsistent) {
/* We subscribe to the cycleInconsistent event only to
* clear the corresponding event bit... otherwise,
DBGMSG("OHCI1394_cycleInconsistent");
event &= ~OHCI1394_cycleInconsistent;
}
-
if (event & OHCI1394_busReset) {
/* The busReset event bit can't be cleared during the
* selfID phase, so we disable busReset interrupts, to
}
event &= ~OHCI1394_busReset;
}
-
if (event & OHCI1394_reqTxComplete) {
struct dma_trm_ctx *d = &ohci->at_req_context;
DBGMSG("Got reqTxComplete interrupt "
reg_write(ohci, OHCI1394_IntMaskSet, OHCI1394_busReset);
spin_unlock_irqrestore(&ohci->event_lock, flags);
- /* Accept Physical requests from all nodes. */
- reg_write(ohci,OHCI1394_AsReqFilterHiSet, 0xffffffff);
- reg_write(ohci,OHCI1394_AsReqFilterLoSet, 0xffffffff);
-
/* Turn on phys dma reception.
*
* TODO: Enable some sort of filtering management.
*/
if (phys_dma) {
- reg_write(ohci,OHCI1394_PhyReqFilterHiSet, 0xffffffff);
- reg_write(ohci,OHCI1394_PhyReqFilterLoSet, 0xffffffff);
- reg_write(ohci,OHCI1394_PhyUpperBound, 0xffff0000);
- } else {
- reg_write(ohci,OHCI1394_PhyReqFilterHiSet, 0x00000000);
- reg_write(ohci,OHCI1394_PhyReqFilterLoSet, 0x00000000);
+ reg_write(ohci, OHCI1394_PhyReqFilterHiSet,
+ 0xffffffff);
+ reg_write(ohci, OHCI1394_PhyReqFilterLoSet,
+ 0xffffffff);
}
DBGMSG("PhyReqFilter=%08x%08x",
- reg_read(ohci,OHCI1394_PhyReqFilterHiSet),
- reg_read(ohci,OHCI1394_PhyReqFilterLoSet));
+ reg_read(ohci, OHCI1394_PhyReqFilterHiSet),
+ reg_read(ohci, OHCI1394_PhyReqFilterLoSet));
hpsb_selfid_complete(host, phyid, isroot);
} else
d->ctrlClear = 0;
d->cmdPtr = 0;
- d->buf_cpu = kmalloc(d->num_desc * sizeof(quadlet_t*), GFP_ATOMIC);
- d->buf_bus = kmalloc(d->num_desc * sizeof(dma_addr_t), GFP_ATOMIC);
+ d->buf_cpu = kzalloc(d->num_desc * sizeof(*d->buf_cpu), GFP_ATOMIC);
+ d->buf_bus = kzalloc(d->num_desc * sizeof(*d->buf_bus), GFP_ATOMIC);
if (d->buf_cpu == NULL || d->buf_bus == NULL) {
PRINT(KERN_ERR, "Failed to allocate dma buffer");
free_dma_rcv_ctx(d);
return -ENOMEM;
}
- memset(d->buf_cpu, 0, d->num_desc * sizeof(quadlet_t*));
- memset(d->buf_bus, 0, d->num_desc * sizeof(dma_addr_t));
- d->prg_cpu = kmalloc(d->num_desc * sizeof(struct dma_cmd*),
- GFP_ATOMIC);
- d->prg_bus = kmalloc(d->num_desc * sizeof(dma_addr_t), GFP_ATOMIC);
+ d->prg_cpu = kzalloc(d->num_desc * sizeof(*d->prg_cpu), GFP_ATOMIC);
+ d->prg_bus = kzalloc(d->num_desc * sizeof(*d->prg_bus), GFP_ATOMIC);
if (d->prg_cpu == NULL || d->prg_bus == NULL) {
PRINT(KERN_ERR, "Failed to allocate dma prg");
free_dma_rcv_ctx(d);
return -ENOMEM;
}
- memset(d->prg_cpu, 0, d->num_desc * sizeof(struct dma_cmd*));
- memset(d->prg_bus, 0, d->num_desc * sizeof(dma_addr_t));
d->spb = kmalloc(d->split_buf_size, GFP_ATOMIC);
d->ctrlClear = 0;
d->cmdPtr = 0;
- d->prg_cpu = kmalloc(d->num_desc * sizeof(struct at_dma_prg*),
- GFP_KERNEL);
- d->prg_bus = kmalloc(d->num_desc * sizeof(dma_addr_t), GFP_KERNEL);
+ d->prg_cpu = kzalloc(d->num_desc * sizeof(*d->prg_cpu), GFP_KERNEL);
+ d->prg_bus = kzalloc(d->num_desc * sizeof(*d->prg_bus), GFP_KERNEL);
if (d->prg_cpu == NULL || d->prg_bus == NULL) {
PRINT(KERN_ERR, "Failed to allocate at dma prg");
free_dma_trm_ctx(d);
return -ENOMEM;
}
- memset(d->prg_cpu, 0, d->num_desc * sizeof(struct at_dma_prg*));
- memset(d->prg_bus, 0, d->num_desc * sizeof(dma_addr_t));
len = sprintf(pool_name, "ohci1394_trm_prg");
sprintf(pool_name+len, "%d", num_allocs);
.hw_csr_reg = ohci_hw_csr_reg,
};
-\f
-
/***********************************
* PCI Driver Interface functions *
***********************************/
static int __devinit ohci1394_pci_probe(struct pci_dev *dev,
const struct pci_device_id *ent)
{
- static int version_printed = 0;
-
struct hpsb_host *host;
struct ti_ohci *ohci; /* shortcut to currently handled device */
unsigned long ohci_base;
- if (version_printed++ == 0)
- PRINT_G(KERN_INFO, "%s", version);
-
if (pci_enable_device(dev))
FAIL(-ENXIO, "Failed to enable OHCI hardware");
pci_set_master(dev);
* fail to report the right length. Anyway, the ohci spec
* clearly says it's 2kb, so this shouldn't be a problem. */
ohci_base = pci_resource_start(dev, 0);
- if (pci_resource_len(dev, 0) != OHCI1394_REGISTER_SIZE)
- PRINT(KERN_WARNING, "Unexpected PCI resource length of %lx!",
+ if (pci_resource_len(dev, 0) < OHCI1394_REGISTER_SIZE)
+ PRINT(KERN_WARNING, "PCI resource length of %lx too small!",
pci_resource_len(dev, 0));
/* Seems PCMCIA handles this internally. Not sure why. Seems
/* Determine the number of available IR and IT contexts. */
ohci->nb_iso_rcv_ctx =
get_nb_iso_ctx(ohci, OHCI1394_IsoRecvIntMaskSet);
- DBGMSG("%d iso receive contexts available",
- ohci->nb_iso_rcv_ctx);
-
ohci->nb_iso_xmit_ctx =
get_nb_iso_ctx(ohci, OHCI1394_IsoXmitIntMaskSet);
- DBGMSG("%d iso transmit contexts available",
- ohci->nb_iso_xmit_ctx);
/* Set the usage bits for non-existent contexts so they can't
* be allocated */
/* We hopefully don't have to pre-allocate IT DMA like we did
* for IR DMA above. Allocate it on-demand and mark inactive. */
ohci->it_legacy_context.ohci = NULL;
+ spin_lock_init(&ohci->event_lock);
+ /*
+ * interrupts are disabled, all right, but... due to SA_SHIRQ we
+ * might get called anyway. We'll see no event, of course, but
+ * we need to get to that "no event", so enough should be initialized
+ * by that point.
+ */
if (request_irq(dev->irq, ohci_irq_handler, SA_SHIRQ,
OHCI1394_DRIVER_NAME, ohci))
FAIL(-ENOMEM, "Failed to allocate shared interrupt %d", dev->irq);
static int ohci1394_pci_resume (struct pci_dev *pdev)
{
-#ifdef CONFIG_PMAC_PBOOK
- {
+#ifdef CONFIG_PPC_PMAC
+ if (machine_is(powermac)) {
struct device_node *of_node;
/* Re-enable 1394 */
if (of_node)
pmac_call_feature (PMAC_FTR_1394_ENABLE, of_node, 0, 1);
}
-#endif
+#endif /* CONFIG_PPC_PMAC */
+ pci_restore_state(pdev);
pci_enable_device(pdev);
return 0;
static int ohci1394_pci_suspend (struct pci_dev *pdev, pm_message_t state)
{
-#ifdef CONFIG_PMAC_PBOOK
- {
+#ifdef CONFIG_PPC_PMAC
+ if (machine_is(powermac)) {
struct device_node *of_node;
/* Disable 1394 */
}
#endif
+ pci_save_state(pdev);
+
return 0;
}
.suspend = ohci1394_pci_suspend,
};
-\f
-
/***********************************
* OHCI1394 Video Interface *
***********************************/
EXPORT_SYMBOL(ohci1394_register_iso_tasklet);
EXPORT_SYMBOL(ohci1394_unregister_iso_tasklet);
-
/***********************************
* General module initialization *
***********************************/
git://git.onelab.eu / linux-2.6.git / blobdiff