#include <linux/vmalloc.h>
#include "ipath_kernel.h"
-#include "ipath_layer.h"
+#include "ipath_verbs.h"
#include "ipath_common.h"
static void ipath_update_pio_bufs(struct ipath_devdata *);
return iname;
}
-EXPORT_SYMBOL_GPL(ipath_get_unit_name);
-
#define DRIVER_LOAD_MSG "QLogic " IPATH_DRV_NAME " loaded: "
#define PFX IPATH_DRV_NAME ": "
* The size has to be longer than this string, so we can append
* board/chip information to it in the init code.
*/
-const char ipath_core_version[] = IPATH_IDSTR "\n";
+const char ib_ipath_version[] = IPATH_IDSTR "\n";
static struct idr unit_table;
DEFINE_SPINLOCK(ipath_devs_lock);
LIST_HEAD(ipath_dev_list);
-wait_queue_head_t ipath_sma_state_wait;
+wait_queue_head_t ipath_state_wait;
unsigned ipath_debug = __IPATH_INFO;
"RecovIdle",
};
-/*
- * These variables are initialized in the chip-specific files
- * but are defined here.
- */
-u16 ipath_gpio_sda_num, ipath_gpio_scl_num;
-u64 ipath_gpio_sda, ipath_gpio_scl;
-u64 infinipath_i_bitsextant;
-ipath_err_t infinipath_e_bitsextant, infinipath_hwe_bitsextant;
-u32 infinipath_i_rcvavail_mask, infinipath_i_rcvurg_mask;
-
static void __devexit ipath_remove_one(struct pci_dev *);
static int __devinit ipath_init_one(struct pci_dev *,
const struct pci_device_id *);
}
addr = pci_resource_start(pdev, 0);
len = pci_resource_len(pdev, 0);
- ipath_cdbg(VERBOSE, "regbase (0) %llx len %d irq %x, vend %x/%x "
+ ipath_cdbg(VERBOSE, "regbase (0) %llx len %d pdev->irq %d, vend %x/%x "
"driver_data %lx\n", addr, len, pdev->irq, ent->vendor,
ent->device, ent->driver_data);
/* setup the chip-specific functions, as early as possible. */
switch (ent->device) {
+#ifdef CONFIG_HT_IRQ
case PCI_DEVICE_ID_INFINIPATH_HT:
- ipath_init_ht400_funcs(dd);
+ ipath_init_iba6110_funcs(dd);
break;
+#endif
+#ifdef CONFIG_PCI_MSI
case PCI_DEVICE_ID_INFINIPATH_PE800:
- ipath_init_pe800_funcs(dd);
+ ipath_init_iba6120_funcs(dd);
break;
+#endif
default:
ipath_dev_err(dd, "Found unknown QLogic deviceid 0x%x, "
"failing\n", ent->device);
}
dd->ipath_pcirev = rev;
+#if defined(__powerpc__)
+ /* There isn't a generic way to specify writethrough mappings */
+ dd->ipath_kregbase = __ioremap(addr, len,
+ (_PAGE_NO_CACHE|_PAGE_WRITETHRU));
+#else
dd->ipath_kregbase = ioremap_nocache(addr, len);
+#endif
if (!dd->ipath_kregbase) {
ipath_dbg("Unable to map io addr %llx to kvirt, failing\n",
* check 0 irq after we return from chip-specific bus setup, since
* that can affect this due to setup
*/
- if (!pdev->irq)
+ if (!dd->ipath_irq)
ipath_dev_err(dd, "irq is 0, BIOS error? Interrupts won't "
"work\n");
else {
- ret = request_irq(pdev->irq, ipath_intr, IRQF_SHARED,
+ ret = request_irq(dd->ipath_irq, ipath_intr, IRQF_SHARED,
IPATH_DRV_NAME, dd);
if (ret) {
ipath_dev_err(dd, "Couldn't setup irq handler, "
- "irq=%u: %d\n", pdev->irq, ret);
+ "irq=%d: %d\n", dd->ipath_irq, ret);
goto bail_iounmap;
}
}
ipathfs_add_device(dd);
ipath_user_add(dd);
ipath_diag_add(dd);
- ipath_layer_add(dd);
+ ipath_register_ib_device(dd);
goto bail;
return ret;
}
+static void __devexit cleanup_device(struct ipath_devdata *dd)
+{
+ int port;
+
+ ipath_shutdown_device(dd);
+
+ if (*dd->ipath_statusp & IPATH_STATUS_CHIP_PRESENT) {
+ /* can't do anything more with chip; needs re-init */
+ *dd->ipath_statusp &= ~IPATH_STATUS_CHIP_PRESENT;
+ if (dd->ipath_kregbase) {
+ /*
+ * if we haven't already cleaned up before these are
+ * to ensure any register reads/writes "fail" until
+ * re-init
+ */
+ dd->ipath_kregbase = NULL;
+ dd->ipath_uregbase = 0;
+ dd->ipath_sregbase = 0;
+ dd->ipath_cregbase = 0;
+ dd->ipath_kregsize = 0;
+ }
+ ipath_disable_wc(dd);
+ }
+
+ if (dd->ipath_pioavailregs_dma) {
+ dma_free_coherent(&dd->pcidev->dev, PAGE_SIZE,
+ (void *) dd->ipath_pioavailregs_dma,
+ dd->ipath_pioavailregs_phys);
+ dd->ipath_pioavailregs_dma = NULL;
+ }
+ if (dd->ipath_dummy_hdrq) {
+ dma_free_coherent(&dd->pcidev->dev,
+ dd->ipath_pd[0]->port_rcvhdrq_size,
+ dd->ipath_dummy_hdrq, dd->ipath_dummy_hdrq_phys);
+ dd->ipath_dummy_hdrq = NULL;
+ }
+
+ if (dd->ipath_pageshadow) {
+ struct page **tmpp = dd->ipath_pageshadow;
+ dma_addr_t *tmpd = dd->ipath_physshadow;
+ int i, cnt = 0;
+
+ ipath_cdbg(VERBOSE, "Unlocking any expTID pages still "
+ "locked\n");
+ for (port = 0; port < dd->ipath_cfgports; port++) {
+ int port_tidbase = port * dd->ipath_rcvtidcnt;
+ int maxtid = port_tidbase + dd->ipath_rcvtidcnt;
+ for (i = port_tidbase; i < maxtid; i++) {
+ if (!tmpp[i])
+ continue;
+ pci_unmap_page(dd->pcidev, tmpd[i],
+ PAGE_SIZE, PCI_DMA_FROMDEVICE);
+ ipath_release_user_pages(&tmpp[i], 1);
+ tmpp[i] = NULL;
+ cnt++;
+ }
+ }
+ if (cnt) {
+ ipath_stats.sps_pageunlocks += cnt;
+ ipath_cdbg(VERBOSE, "There were still %u expTID "
+ "entries locked\n", cnt);
+ }
+ if (ipath_stats.sps_pagelocks ||
+ ipath_stats.sps_pageunlocks)
+ ipath_cdbg(VERBOSE, "%llu pages locked, %llu "
+ "unlocked via ipath_m{un}lock\n",
+ (unsigned long long)
+ ipath_stats.sps_pagelocks,
+ (unsigned long long)
+ ipath_stats.sps_pageunlocks);
+
+ ipath_cdbg(VERBOSE, "Free shadow page tid array at %p\n",
+ dd->ipath_pageshadow);
+ vfree(dd->ipath_pageshadow);
+ dd->ipath_pageshadow = NULL;
+ }
+
+ /*
+ * free any resources still in use (usually just kernel ports)
+ * at unload; we do for portcnt, not cfgports, because cfgports
+ * could have changed while we were loaded.
+ */
+ for (port = 0; port < dd->ipath_portcnt; port++) {
+ struct ipath_portdata *pd = dd->ipath_pd[port];
+ dd->ipath_pd[port] = NULL;
+ ipath_free_pddata(dd, pd);
+ }
+ kfree(dd->ipath_pd);
+ /*
+ * debuggability, in case some cleanup path tries to use it
+ * after this
+ */
+ dd->ipath_pd = NULL;
+}
+
static void __devexit ipath_remove_one(struct pci_dev *pdev)
{
- struct ipath_devdata *dd;
+ struct ipath_devdata *dd = pci_get_drvdata(pdev);
- ipath_cdbg(VERBOSE, "removing, pdev=%p\n", pdev);
- if (!pdev)
- return;
+ ipath_cdbg(VERBOSE, "removing, pdev=%p, dd=%p\n", pdev, dd);
+
+ if (dd->verbs_dev)
+ ipath_unregister_ib_device(dd->verbs_dev);
- dd = pci_get_drvdata(pdev);
- ipath_layer_remove(dd);
ipath_diag_remove(dd);
ipath_user_remove(dd);
ipathfs_remove_device(dd);
ipath_device_remove_group(&pdev->dev, dd);
+
ipath_cdbg(VERBOSE, "Releasing pci memory regions, dd %p, "
"unit %u\n", dd, (u32) dd->ipath_unit);
- if (dd->ipath_kregbase) {
- ipath_cdbg(VERBOSE, "Unmapping kregbase %p\n",
- dd->ipath_kregbase);
- iounmap((volatile void __iomem *) dd->ipath_kregbase);
- dd->ipath_kregbase = NULL;
- }
+
+ cleanup_device(dd);
+
+ /*
+ * turn off rcv, send, and interrupts for all ports, all drivers
+ * should also hard reset the chip here?
+ * free up port 0 (kernel) rcvhdr, egr bufs, and eventually tid bufs
+ * for all versions of the driver, if they were allocated
+ */
+ if (dd->ipath_irq) {
+ ipath_cdbg(VERBOSE, "unit %u free irq %d\n",
+ dd->ipath_unit, dd->ipath_irq);
+ dd->ipath_f_free_irq(dd);
+ } else
+ ipath_dbg("irq is 0, not doing free_irq "
+ "for unit %u\n", dd->ipath_unit);
+ /*
+ * we check for NULL here, because it's outside
+ * the kregbase check, and we need to call it
+ * after the free_irq. Thus it's possible that
+ * the function pointers were never initialized.
+ */
+ if (dd->ipath_f_cleanup)
+ /* clean up chip-specific stuff */
+ dd->ipath_f_cleanup(dd);
+
+ ipath_cdbg(VERBOSE, "Unmapping kregbase %p\n", dd->ipath_kregbase);
+ iounmap((volatile void __iomem *) dd->ipath_kregbase);
pci_release_regions(pdev);
ipath_cdbg(VERBOSE, "calling pci_disable_device\n");
pci_disable_device(pdev);
*
* wait up to msecs milliseconds for IB link state change to occur for
* now, take the easy polling route. Currently used only by
- * ipath_layer_set_linkstate. Returns 0 if state reached, otherwise
+ * ipath_set_linkstate. Returns 0 if state reached, otherwise
* -ETIMEDOUT state can have multiple states set, for any of several
* transitions.
*/
-int ipath_wait_linkstate(struct ipath_devdata *dd, u32 state, int msecs)
+static int ipath_wait_linkstate(struct ipath_devdata *dd, u32 state,
+ int msecs)
{
- dd->ipath_sma_state_wanted = state;
- wait_event_interruptible_timeout(ipath_sma_state_wait,
+ dd->ipath_state_wanted = state;
+ wait_event_interruptible_timeout(ipath_state_wait,
(dd->ipath_flags & state),
msecs_to_jiffies(msecs));
- dd->ipath_sma_state_wanted = 0;
+ dd->ipath_state_wanted = 0;
if (!(dd->ipath_flags & state)) {
u64 val;
- ipath_cdbg(SMA, "Didn't reach linkstate %s within %u ms\n",
+ ipath_cdbg(VERBOSE, "Didn't reach linkstate %s within %u"
+ " ms\n",
/* test INIT ahead of DOWN, both can be set */
(state & IPATH_LINKINIT) ? "INIT" :
((state & IPATH_LINKDOWN) ? "DOWN" :
static inline void *ipath_get_egrbuf(struct ipath_devdata *dd, u32 bufnum,
int err)
{
- return dd->ipath_port0_skbs ?
- (void *)dd->ipath_port0_skbs[bufnum]->data : NULL;
+ return dd->ipath_port0_skbinfo ?
+ (void *) dd->ipath_port0_skbinfo[bufnum].skb->data : NULL;
}
/**
*/
/*
- * We need 4 extra bytes for unaligned transfer copying
+ * We need 2 extra bytes for ipath_ether data sent in the
+ * key header. In order to keep everything dword aligned,
+ * we'll reserve 4 bytes.
*/
+ len = dd->ipath_ibmaxlen + 4;
+
if (dd->ipath_flags & IPATH_4BYTE_TID) {
- /* we need a 4KB multiple alignment, and there is no way
+ /* We need a 2KB multiple alignment, and there is no way
* to do it except to allocate extra and then skb_reserve
* enough to bring it up to the right alignment.
*/
- len = dd->ipath_ibmaxlen + 4 + (1 << 11) - 1;
+ len += 2047;
}
- else
- len = dd->ipath_ibmaxlen + 4;
+
skb = __dev_alloc_skb(len, gfp_mask);
if (!skb) {
ipath_dev_err(dd, "Failed to allocate skbuff, length %u\n",
len);
goto bail;
}
+
+ skb_reserve(skb, 4);
+
if (dd->ipath_flags & IPATH_4BYTE_TID) {
- u32 una = ((1 << 11) - 1) & (unsigned long)(skb->data + 4);
+ u32 una = (unsigned long)skb->data & 2047;
if (una)
- skb_reserve(skb, 4 + (1 << 11) - una);
- else
- skb_reserve(skb, 4);
- } else
- skb_reserve(skb, 4);
+ skb_reserve(skb, 2048 - una);
+ }
bail:
return skb;
}
-/**
- * ipath_rcv_layer - receive a packet for the layered (ethernet) driver
- * @dd: the infinipath device
- * @etail: the sk_buff number
- * @tlen: the total packet length
- * @hdr: the ethernet header
- *
- * Separate routine for better overall optimization
- */
-static void ipath_rcv_layer(struct ipath_devdata *dd, u32 etail,
- u32 tlen, struct ether_header *hdr)
-{
- u32 elen;
- u8 pad, *bthbytes;
- struct sk_buff *skb, *nskb;
-
- if (dd->ipath_port0_skbs &&
- hdr->sub_opcode == IPATH_ITH4X_OPCODE_ENCAP) {
- /*
- * Allocate a new sk_buff to replace the one we give
- * to the network stack.
- */
- nskb = ipath_alloc_skb(dd, GFP_ATOMIC);
- if (!nskb) {
- /* count OK packets that we drop */
- ipath_stats.sps_krdrops++;
- return;
- }
-
- bthbytes = (u8 *) hdr->bth;
- pad = (bthbytes[1] >> 4) & 3;
- /* +CRC32 */
- elen = tlen - (sizeof(*hdr) + pad + sizeof(u32));
-
- skb = dd->ipath_port0_skbs[etail];
- dd->ipath_port0_skbs[etail] = nskb;
- skb_put(skb, elen);
-
- dd->ipath_f_put_tid(dd, etail + (u64 __iomem *)
- ((char __iomem *) dd->ipath_kregbase
- + dd->ipath_rcvegrbase), 0,
- virt_to_phys(nskb->data));
-
- __ipath_layer_rcv(dd, hdr, skb);
-
- /* another ether packet received */
- ipath_stats.sps_ether_rpkts++;
- }
- else if (hdr->sub_opcode == IPATH_ITH4X_OPCODE_LID_ARP)
- __ipath_layer_rcv_lid(dd, hdr);
-}
-
static void ipath_rcv_hdrerr(struct ipath_devdata *dd,
u32 eflags,
u32 l,
if (unlikely(eflags))
ipath_rcv_hdrerr(dd, eflags, l, etail, rc);
else if (etype == RCVHQ_RCV_TYPE_NON_KD) {
- int ret = __ipath_verbs_rcv(dd, rc + 1,
- ebuf, tlen);
- if (ret == -ENODEV)
- ipath_cdbg(VERBOSE,
- "received IB packet, "
- "not SMA (QP=%x)\n", qp);
- if (dd->ipath_lli_counter)
- dd->ipath_lli_counter--;
-
- } else if (etype == RCVHQ_RCV_TYPE_EAGER) {
- if (qp == IPATH_KD_QP &&
- bthbytes[0] == ipath_layer_rcv_opcode &&
- ebuf)
- ipath_rcv_layer(dd, etail, tlen,
- (struct ether_header *)hdr);
- else
- ipath_cdbg(PKT, "typ %x, opcode %x (eager, "
- "qp=%x), len %x; ignored\n",
- etype, bthbytes[0], qp, tlen);
+ ipath_ib_rcv(dd->verbs_dev, rc + 1, ebuf, tlen);
+ if (dd->ipath_lli_counter)
+ dd->ipath_lli_counter--;
+ ipath_cdbg(PKT, "typ %x, opcode %x (eager, "
+ "qp=%x), len %x; ignored\n",
+ etype, bthbytes[0], qp, tlen);
}
+ else if (etype == RCVHQ_RCV_TYPE_EAGER)
+ ipath_cdbg(PKT, "typ %x, opcode %x (eager, "
+ "qp=%x), len %x; ignored\n",
+ etype, bthbytes[0], qp, tlen);
else if (etype == RCVHQ_RCV_TYPE_EXPECTED)
ipath_dbg("Bug: Expected TID, opcode %x; ignored\n",
be32_to_cpu(hdr->bth[0]) & 0xff);
*/
if (l == hdrqtail || (i && !(i&0xf))) {
u64 lval;
- if (l == hdrqtail) /* PE-800 interrupt only on last */
+ if (l == hdrqtail)
+ /* request IBA6120 interrupt only on last */
lval = dd->ipath_rhdrhead_intr_off | l;
else
lval = l;
}
if (!dd->ipath_rhdrhead_intr_off && !reloop) {
- /* HT-400 workaround; we can have a race clearing chip
+ /* IBA6110 workaround; we can have a race clearing chip
* interrupt with another interrupt about to be delivered,
* and can clear it before it is delivered on the GPIO
* workaround. By doing the extra check here for the
*
* do appropriate marking as busy, etc.
* returns buffer number if one found (>=0), negative number is error.
- * Used by ipath_sma_send_pkt and ipath_layer_send
+ * Used by ipath_layer_send
*/
u32 __iomem *ipath_getpiobuf(struct ipath_devdata *dd, u32 * pbufnum)
{
goto bail;
}
- if (updated)
- /*
- * ran out of bufs, now some (at least this one we just
- * got) are now available, so tell the layered driver.
- */
- __ipath_layer_intr(dd, IPATH_LAYER_INT_SEND_CONTINUE);
-
/*
* set next starting place. Since it's just an optimization,
* it doesn't matter who wins on this, so no locking
"for port %u rcvhdrqtailaddr failed\n",
pd->port_port);
ret = -ENOMEM;
+ dma_free_coherent(&dd->pcidev->dev, amt,
+ pd->port_rcvhdrq, pd->port_rcvhdrq_phys);
+ pd->port_rcvhdrq = NULL;
goto bail;
}
pd->port_rcvhdrqtailaddr_phys = phys_hdrqtail;
ipath_cdbg(VERBOSE, "reuse port %d rcvhdrq @%p %llx phys; "
"hdrtailaddr@%p %llx physical\n",
pd->port_port, pd->port_rcvhdrq,
- pd->port_rcvhdrq_phys, pd->port_rcvhdrtail_kvaddr,
- (unsigned long long)pd->port_rcvhdrqtailaddr_phys);
+ (unsigned long long) pd->port_rcvhdrq_phys,
+ pd->port_rcvhdrtail_kvaddr, (unsigned long long)
+ pd->port_rcvhdrqtailaddr_phys);
/* clear for security and sanity on each use */
memset(pd->port_rcvhdrq, 0, pd->port_rcvhdrq_size);
- memset((void *)pd->port_rcvhdrtail_kvaddr, 0, PAGE_SIZE);
+ memset(pd->port_rcvhdrtail_kvaddr, 0, PAGE_SIZE);
/*
* tell chip each time we init it, even if we are re-using previous
return ret;
}
-void ipath_set_ib_lstate(struct ipath_devdata *dd, int which)
+static void ipath_set_ib_lstate(struct ipath_devdata *dd, int which)
{
static const char *what[4] = {
[0] = "DOWN",
int linkcmd = (which >> INFINIPATH_IBCC_LINKCMD_SHIFT) &
INFINIPATH_IBCC_LINKCMD_MASK;
- ipath_cdbg(SMA, "Trying to move unit %u to %s, current ltstate "
+ ipath_cdbg(VERBOSE, "Trying to move unit %u to %s, current ltstate "
"is %s\n", dd->ipath_unit,
what[linkcmd],
ipath_ibcstatus_str[
INFINIPATH_IBCS_LINKTRAININGSTATE_SHIFT) &
INFINIPATH_IBCS_LINKTRAININGSTATE_MASK]);
/* flush all queued sends when going to DOWN or INIT, to be sure that
- * they don't block SMA and other MAD packets */
+ * they don't block MAD packets */
if (!linkcmd || linkcmd == INFINIPATH_IBCC_LINKCMD_INIT) {
ipath_write_kreg(dd, dd->ipath_kregs->kr_sendctrl,
INFINIPATH_S_ABORT);
dd->ipath_ibcctrl | which);
}
+int ipath_set_linkstate(struct ipath_devdata *dd, u8 newstate)
+{
+ u32 lstate;
+ int ret;
+
+ switch (newstate) {
+ case IPATH_IB_LINKDOWN:
+ ipath_set_ib_lstate(dd, INFINIPATH_IBCC_LINKINITCMD_POLL <<
+ INFINIPATH_IBCC_LINKINITCMD_SHIFT);
+ /* don't wait */
+ ret = 0;
+ goto bail;
+
+ case IPATH_IB_LINKDOWN_SLEEP:
+ ipath_set_ib_lstate(dd, INFINIPATH_IBCC_LINKINITCMD_SLEEP <<
+ INFINIPATH_IBCC_LINKINITCMD_SHIFT);
+ /* don't wait */
+ ret = 0;
+ goto bail;
+
+ case IPATH_IB_LINKDOWN_DISABLE:
+ ipath_set_ib_lstate(dd,
+ INFINIPATH_IBCC_LINKINITCMD_DISABLE <<
+ INFINIPATH_IBCC_LINKINITCMD_SHIFT);
+ /* don't wait */
+ ret = 0;
+ goto bail;
+
+ case IPATH_IB_LINKINIT:
+ if (dd->ipath_flags & IPATH_LINKINIT) {
+ ret = 0;
+ goto bail;
+ }
+ ipath_set_ib_lstate(dd, INFINIPATH_IBCC_LINKCMD_INIT <<
+ INFINIPATH_IBCC_LINKCMD_SHIFT);
+ lstate = IPATH_LINKINIT;
+ break;
+
+ case IPATH_IB_LINKARM:
+ if (dd->ipath_flags & IPATH_LINKARMED) {
+ ret = 0;
+ goto bail;
+ }
+ if (!(dd->ipath_flags &
+ (IPATH_LINKINIT | IPATH_LINKACTIVE))) {
+ ret = -EINVAL;
+ goto bail;
+ }
+ ipath_set_ib_lstate(dd, INFINIPATH_IBCC_LINKCMD_ARMED <<
+ INFINIPATH_IBCC_LINKCMD_SHIFT);
+ /*
+ * Since the port can transition to ACTIVE by receiving
+ * a non VL 15 packet, wait for either state.
+ */
+ lstate = IPATH_LINKARMED | IPATH_LINKACTIVE;
+ break;
+
+ case IPATH_IB_LINKACTIVE:
+ if (dd->ipath_flags & IPATH_LINKACTIVE) {
+ ret = 0;
+ goto bail;
+ }
+ if (!(dd->ipath_flags & IPATH_LINKARMED)) {
+ ret = -EINVAL;
+ goto bail;
+ }
+ ipath_set_ib_lstate(dd, INFINIPATH_IBCC_LINKCMD_ACTIVE <<
+ INFINIPATH_IBCC_LINKCMD_SHIFT);
+ lstate = IPATH_LINKACTIVE;
+ break;
+
+ default:
+ ipath_dbg("Invalid linkstate 0x%x requested\n", newstate);
+ ret = -EINVAL;
+ goto bail;
+ }
+ ret = ipath_wait_linkstate(dd, lstate, 2000);
+
+bail:
+ return ret;
+}
+
+/**
+ * ipath_set_mtu - set the MTU
+ * @dd: the infinipath device
+ * @arg: the new MTU
+ *
+ * we can handle "any" incoming size, the issue here is whether we
+ * need to restrict our outgoing size. For now, we don't do any
+ * sanity checking on this, and we don't deal with what happens to
+ * programs that are already running when the size changes.
+ * NOTE: changing the MTU will usually cause the IBC to go back to
+ * link initialize (IPATH_IBSTATE_INIT) state...
+ */
+int ipath_set_mtu(struct ipath_devdata *dd, u16 arg)
+{
+ u32 piosize;
+ int changed = 0;
+ int ret;
+
+ /*
+ * mtu is IB data payload max. It's the largest power of 2 less
+ * than piosize (or even larger, since it only really controls the
+ * largest we can receive; we can send the max of the mtu and
+ * piosize). We check that it's one of the valid IB sizes.
+ */
+ if (arg != 256 && arg != 512 && arg != 1024 && arg != 2048 &&
+ arg != 4096) {
+ ipath_dbg("Trying to set invalid mtu %u, failing\n", arg);
+ ret = -EINVAL;
+ goto bail;
+ }
+ if (dd->ipath_ibmtu == arg) {
+ ret = 0; /* same as current */
+ goto bail;
+ }
+
+ piosize = dd->ipath_ibmaxlen;
+ dd->ipath_ibmtu = arg;
+
+ if (arg >= (piosize - IPATH_PIO_MAXIBHDR)) {
+ /* Only if it's not the initial value (or reset to it) */
+ if (piosize != dd->ipath_init_ibmaxlen) {
+ dd->ipath_ibmaxlen = piosize;
+ changed = 1;
+ }
+ } else if ((arg + IPATH_PIO_MAXIBHDR) != dd->ipath_ibmaxlen) {
+ piosize = arg + IPATH_PIO_MAXIBHDR;
+ ipath_cdbg(VERBOSE, "ibmaxlen was 0x%x, setting to 0x%x "
+ "(mtu 0x%x)\n", dd->ipath_ibmaxlen, piosize,
+ arg);
+ dd->ipath_ibmaxlen = piosize;
+ changed = 1;
+ }
+
+ if (changed) {
+ /*
+ * set the IBC maxpktlength to the size of our pio
+ * buffers in words
+ */
+ u64 ibc = dd->ipath_ibcctrl;
+ ibc &= ~(INFINIPATH_IBCC_MAXPKTLEN_MASK <<
+ INFINIPATH_IBCC_MAXPKTLEN_SHIFT);
+
+ piosize = piosize - 2 * sizeof(u32); /* ignore pbc */
+ dd->ipath_ibmaxlen = piosize;
+ piosize /= sizeof(u32); /* in words */
+ /*
+ * for ICRC, which we only send in diag test pkt mode, and
+ * we don't need to worry about that for mtu
+ */
+ piosize += 1;
+
+ ibc |= piosize << INFINIPATH_IBCC_MAXPKTLEN_SHIFT;
+ dd->ipath_ibcctrl = ibc;
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_ibcctrl,
+ dd->ipath_ibcctrl);
+ dd->ipath_f_tidtemplate(dd);
+ }
+
+ ret = 0;
+
+bail:
+ return ret;
+}
+
+int ipath_set_lid(struct ipath_devdata *dd, u32 arg, u8 lmc)
+{
+ dd->ipath_lid = arg;
+ dd->ipath_lmc = lmc;
+
+ return 0;
+}
+
/**
* ipath_read_kreg64_port - read a device's per-port 64-bit kernel register
* @dd: the infinipath device
*/
void ipath_shutdown_device(struct ipath_devdata *dd)
{
- u64 val;
-
ipath_dbg("Shutting down the device\n");
dd->ipath_flags |= IPATH_LINKUNK;
*/
ipath_write_kreg(dd, dd->ipath_kregs->kr_sendctrl, 0ULL);
/* flush it */
- val = ipath_read_kreg64(dd, dd->ipath_kregs->kr_scratch);
+ ipath_read_kreg64(dd, dd->ipath_kregs->kr_scratch);
/*
* enough for anything that's going to trickle out to have actually
* done so.
ipath_set_ib_lstate(dd, INFINIPATH_IBCC_LINKINITCMD_DISABLE <<
INFINIPATH_IBCC_LINKINITCMD_SHIFT);
- /*
- * we are shutting down, so tell the layered driver. We don't do
- * this on just a link state change, much like ethernet, a cable
- * unplug, etc. doesn't change driver state
- */
- ipath_layer_intr(dd, IPATH_LAYER_INT_IF_DOWN);
-
/* disable IBC */
dd->ipath_control &= ~INFINIPATH_C_LINKENABLE;
ipath_write_kreg(dd, dd->ipath_kregs->kr_control,
pd->port_rcvhdrq = NULL;
if (pd->port_rcvhdrtail_kvaddr) {
dma_free_coherent(&dd->pcidev->dev, PAGE_SIZE,
- (void *)pd->port_rcvhdrtail_kvaddr,
+ pd->port_rcvhdrtail_kvaddr,
pd->port_rcvhdrqtailaddr_phys);
pd->port_rcvhdrtail_kvaddr = NULL;
}
dma_free_coherent(&dd->pcidev->dev, size,
base, pd->port_rcvegrbuf_phys[e]);
}
- vfree(pd->port_rcvegrbuf);
+ kfree(pd->port_rcvegrbuf);
pd->port_rcvegrbuf = NULL;
- vfree(pd->port_rcvegrbuf_phys);
+ kfree(pd->port_rcvegrbuf_phys);
pd->port_rcvegrbuf_phys = NULL;
pd->port_rcvegrbuf_chunks = 0;
- } else if (pd->port_port == 0 && dd->ipath_port0_skbs) {
+ } else if (pd->port_port == 0 && dd->ipath_port0_skbinfo) {
unsigned e;
- struct sk_buff **skbs = dd->ipath_port0_skbs;
+ struct ipath_skbinfo *skbinfo = dd->ipath_port0_skbinfo;
- dd->ipath_port0_skbs = NULL;
- ipath_cdbg(VERBOSE, "free closed port %d ipath_port0_skbs "
- "@ %p\n", pd->port_port, skbs);
+ dd->ipath_port0_skbinfo = NULL;
+ ipath_cdbg(VERBOSE, "free closed port %d "
+ "ipath_port0_skbinfo @ %p\n", pd->port_port,
+ skbinfo);
for (e = 0; e < dd->ipath_rcvegrcnt; e++)
- if (skbs[e])
- dev_kfree_skb(skbs[e]);
- vfree(skbs);
+ if (skbinfo[e].skb) {
+ pci_unmap_single(dd->pcidev, skbinfo[e].phys,
+ dd->ipath_ibmaxlen,
+ PCI_DMA_FROMDEVICE);
+ dev_kfree_skb(skbinfo[e].skb);
+ }
+ vfree(skbinfo);
}
kfree(pd->port_tid_pg_list);
+ vfree(pd->subport_uregbase);
+ vfree(pd->subport_rcvegrbuf);
+ vfree(pd->subport_rcvhdr_base);
kfree(pd);
}
{
int ret;
- ipath_dbg(KERN_INFO DRIVER_LOAD_MSG "%s", ipath_core_version);
+ ipath_dbg(KERN_INFO DRIVER_LOAD_MSG "%s", ib_ipath_version);
/*
* These must be called before the driver is registered with
return ret;
}
-static void cleanup_device(struct ipath_devdata *dd)
-{
- int port;
-
- ipath_shutdown_device(dd);
-
- if (*dd->ipath_statusp & IPATH_STATUS_CHIP_PRESENT) {
- /* can't do anything more with chip; needs re-init */
- *dd->ipath_statusp &= ~IPATH_STATUS_CHIP_PRESENT;
- if (dd->ipath_kregbase) {
- /*
- * if we haven't already cleaned up before these are
- * to ensure any register reads/writes "fail" until
- * re-init
- */
- dd->ipath_kregbase = NULL;
- dd->ipath_uregbase = 0;
- dd->ipath_sregbase = 0;
- dd->ipath_cregbase = 0;
- dd->ipath_kregsize = 0;
- }
- ipath_disable_wc(dd);
- }
-
- if (dd->ipath_pioavailregs_dma) {
- dma_free_coherent(&dd->pcidev->dev, PAGE_SIZE,
- (void *) dd->ipath_pioavailregs_dma,
- dd->ipath_pioavailregs_phys);
- dd->ipath_pioavailregs_dma = NULL;
- }
- if (dd->ipath_dummy_hdrq) {
- dma_free_coherent(&dd->pcidev->dev,
- dd->ipath_pd[0]->port_rcvhdrq_size,
- dd->ipath_dummy_hdrq, dd->ipath_dummy_hdrq_phys);
- dd->ipath_dummy_hdrq = NULL;
- }
-
- if (dd->ipath_pageshadow) {
- struct page **tmpp = dd->ipath_pageshadow;
- int i, cnt = 0;
-
- ipath_cdbg(VERBOSE, "Unlocking any expTID pages still "
- "locked\n");
- for (port = 0; port < dd->ipath_cfgports; port++) {
- int port_tidbase = port * dd->ipath_rcvtidcnt;
- int maxtid = port_tidbase + dd->ipath_rcvtidcnt;
- for (i = port_tidbase; i < maxtid; i++) {
- if (!tmpp[i])
- continue;
- ipath_release_user_pages(&tmpp[i], 1);
- tmpp[i] = NULL;
- cnt++;
- }
- }
- if (cnt) {
- ipath_stats.sps_pageunlocks += cnt;
- ipath_cdbg(VERBOSE, "There were still %u expTID "
- "entries locked\n", cnt);
- }
- if (ipath_stats.sps_pagelocks ||
- ipath_stats.sps_pageunlocks)
- ipath_cdbg(VERBOSE, "%llu pages locked, %llu "
- "unlocked via ipath_m{un}lock\n",
- (unsigned long long)
- ipath_stats.sps_pagelocks,
- (unsigned long long)
- ipath_stats.sps_pageunlocks);
-
- ipath_cdbg(VERBOSE, "Free shadow page tid array at %p\n",
- dd->ipath_pageshadow);
- vfree(dd->ipath_pageshadow);
- dd->ipath_pageshadow = NULL;
- }
-
- /*
- * free any resources still in use (usually just kernel ports)
- * at unload; we do for portcnt, not cfgports, because cfgports
- * could have changed while we were loaded.
- */
- for (port = 0; port < dd->ipath_portcnt; port++) {
- struct ipath_portdata *pd = dd->ipath_pd[port];
- dd->ipath_pd[port] = NULL;
- ipath_free_pddata(dd, pd);
- }
- kfree(dd->ipath_pd);
- /*
- * debuggability, in case some cleanup path tries to use it
- * after this
- */
- dd->ipath_pd = NULL;
-}
-
static void __exit infinipath_cleanup(void)
{
- struct ipath_devdata *dd, *tmp;
- unsigned long flags;
-
ipath_exit_ipathfs();
ipath_driver_remove_group(&ipath_driver.driver);
- spin_lock_irqsave(&ipath_devs_lock, flags);
-
- /*
- * turn off rcv, send, and interrupts for all ports, all drivers
- * should also hard reset the chip here?
- * free up port 0 (kernel) rcvhdr, egr bufs, and eventually tid bufs
- * for all versions of the driver, if they were allocated
- */
- list_for_each_entry_safe(dd, tmp, &ipath_dev_list, ipath_list) {
- spin_unlock_irqrestore(&ipath_devs_lock, flags);
-
- if (dd->ipath_kregbase)
- cleanup_device(dd);
-
- if (dd->pcidev) {
- if (dd->pcidev->irq) {
- ipath_cdbg(VERBOSE,
- "unit %u free_irq of irq %x\n",
- dd->ipath_unit, dd->pcidev->irq);
- free_irq(dd->pcidev->irq, dd);
- } else
- ipath_dbg("irq is 0, not doing free_irq "
- "for unit %u\n", dd->ipath_unit);
-
- /*
- * we check for NULL here, because it's outside
- * the kregbase check, and we need to call it
- * after the free_irq. Thus it's possible that
- * the function pointers were never initialized.
- */
- if (dd->ipath_f_cleanup)
- /* clean up chip-specific stuff */
- dd->ipath_f_cleanup(dd);
-
- dd->pcidev = NULL;
- }
- spin_lock_irqsave(&ipath_devs_lock, flags);
- }
-
- spin_unlock_irqrestore(&ipath_devs_lock, flags);
-
ipath_cdbg(VERBOSE, "Unregistering pci driver\n");
pci_unregister_driver(&ipath_driver);
return ret;
}
+int ipath_set_rx_pol_inv(struct ipath_devdata *dd, u8 new_pol_inv)
+{
+ u64 val;
+ if ( new_pol_inv > INFINIPATH_XGXS_RX_POL_MASK ) {
+ return -1;
+ }
+ if ( dd->ipath_rx_pol_inv != new_pol_inv ) {
+ dd->ipath_rx_pol_inv = new_pol_inv;
+ val = ipath_read_kreg64(dd, dd->ipath_kregs->kr_xgxsconfig);
+ val &= ~(INFINIPATH_XGXS_RX_POL_MASK <<
+ INFINIPATH_XGXS_RX_POL_SHIFT);
+ val |= ((u64)dd->ipath_rx_pol_inv) <<
+ INFINIPATH_XGXS_RX_POL_SHIFT;
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_xgxsconfig, val);
+ }
+ return 0;
+}
module_init(infinipath_init);
module_exit(infinipath_cleanup);
git://git.onelab.eu / linux-2.6.git / blobdiff