#ifndef _IPATH_KERNEL_H
#define _IPATH_KERNEL_H
/*
+ * Copyright (c) 2006 QLogic, Inc. All rights reserved.
* Copyright (c) 2003, 2004, 2005, 2006 PathScale, Inc. All rights reserved.
*
* This software is available to you under a choice of one of two
/* rcvhdrq base, needs mmap before useful */
void *port_rcvhdrq;
/* kernel virtual address where hdrqtail is updated */
- u64 *port_rcvhdrtail_kvaddr;
- /* page * used for uaddr */
- struct page *port_rcvhdrtail_pagep;
+ volatile __le64 *port_rcvhdrtail_kvaddr;
/*
* temp buffer for expected send setup, allocated at open, instead
* of each setup call
dma_addr_t port_rcvegr_phys;
/* mmap of hdrq, must fit in 44 bits */
dma_addr_t port_rcvhdrq_phys;
- /*
- * the actual user address that we ipath_mlock'ed, so we can
- * ipath_munlock it at close
- */
- unsigned long port_rcvhdrtail_uaddr;
+ dma_addr_t port_rcvhdrqtailaddr_phys;
/*
* number of opens on this instance (0 or 1; ignoring forks, dup,
* etc. for now)
unsigned long ipath_physaddr;
/* base of memory alloced for ipath_kregbase, for free */
u64 *ipath_kregalloc;
- /*
- * version of kregbase that doesn't have high bits set (for 32 bit
- * programs, so mmap64 44 bit works)
- */
- u64 __iomem *ipath_kregvirt;
/*
* virtual address where port0 rcvhdrqtail updated for this unit.
* only written to by the chip, not the driver.
*/
volatile __le64 *ipath_hdrqtailptr;
- dma_addr_t ipath_dma_addr;
/* ipath_cfgports pointers */
struct ipath_portdata **ipath_pd;
/* sk_buffs used by port 0 eager receive queue */
char *ipath_freezemsg;
/* pci access data structure */
struct pci_dev *pcidev;
- struct cdev *cdev;
- struct class_device *class_dev;
+ struct cdev *user_cdev;
+ struct cdev *diag_cdev;
+ struct class_device *user_class_dev;
+ struct class_device *diag_class_dev;
/* timer used to prevent stats overflow, error throttling, etc. */
struct timer_list ipath_stats_timer;
/* check for stale messages in rcv queue */
/* only allow one intr at a time. */
unsigned long ipath_rcv_pending;
+ void *ipath_dummy_hdrq; /* used after port close */
+ dma_addr_t ipath_dummy_hdrq_phys;
/*
* Shadow copies of registers; size indicates read access size.
u16 ipath_lid;
/* list of pkeys programmed; 0 if not set */
u16 ipath_pkeys[4];
- /* ASCII serial number, from flash */
- u8 ipath_serial[12];
+ /*
+ * ASCII serial number, from flash, large enough for original
+ * all digit strings, and longer QLogic serial number format
+ */
+ u8 ipath_serial[16];
/* human readable board version */
u8 ipath_boardversion[80];
/* chip major rev, from ipath_revision */
u8 ipath_pci_cacheline;
/* LID mask control */
u8 ipath_lmc;
-};
-
-extern volatile __le64 *ipath_port0_rcvhdrtail;
-extern dma_addr_t ipath_port0_rcvhdrtail_dma;
-#define IPATH_PORT0_RCVHDRTAIL_SIZE PAGE_SIZE
+ /* local link integrity counter */
+ u32 ipath_lli_counter;
+ /* local link integrity errors */
+ u32 ipath_lli_errors;
+};
extern struct list_head ipath_dev_list;
extern spinlock_t ipath_devs_lock;
extern int __ipath_verbs_rcv(struct ipath_devdata *, void *, void *, u32);
void ipath_layer_add(struct ipath_devdata *);
-void ipath_layer_del(struct ipath_devdata *);
+void ipath_layer_remove(struct ipath_devdata *);
int ipath_init_chip(struct ipath_devdata *, int);
int ipath_enable_wc(struct ipath_devdata *dd);
void ipath_cdev_cleanup(struct cdev **cdevp,
struct class_device **class_devp);
-int ipath_diag_init(void);
-void ipath_diag_cleanup(void);
+int ipath_diag_add(struct ipath_devdata *);
+void ipath_diag_remove(struct ipath_devdata *);
void ipath_diag_bringup_link(struct ipath_devdata *);
extern wait_queue_head_t ipath_sma_state_wait;
int ipath_user_add(struct ipath_devdata *dd);
-void ipath_user_del(struct ipath_devdata *dd);
+void ipath_user_remove(struct ipath_devdata *dd);
struct sk_buff *ipath_alloc_skb(struct ipath_devdata *dd, gfp_t);
unsigned cnt);
int ipath_create_rcvhdrq(struct ipath_devdata *, struct ipath_portdata *);
-void ipath_free_pddata(struct ipath_devdata *, u32, int);
+void ipath_free_pddata(struct ipath_devdata *, struct ipath_portdata *);
int ipath_parse_ushort(const char *str, unsigned short *valp);
* @port: port number
*
* Return the contents of a register that is virtualized to be per port.
- * Prints a debug message and returns -1 on errors (not distinguishable from
- * valid contents at runtime; we may add a separate error variable at some
- * point).
- *
- * This is normally not used by the kernel, but may be for debugging, and
- * has a different implementation than user mode, which is why it's not in
- * _common.h.
+ * Returns -1 on errors (not distinguishable from valid contents at
+ * runtime; we may add a separate error variable at some point).
*/
static inline u32 ipath_read_ureg32(const struct ipath_devdata *dd,
ipath_ureg regno, int port)
#define IPATH_DRV_NAME "ipath_core"
#define IPATH_MAJOR 233
+#define IPATH_USER_MINOR_BASE 0
#define IPATH_SMA_MINOR 128
-#define IPATH_DIAG_MINOR 129
-#define IPATH_NMINORS 130
+#define IPATH_DIAG_MINOR_BASE 129
+#define IPATH_NMINORS 255
#define ipath_dev_err(dd,fmt,...) \
do { \
git://git.onelab.eu / linux-2.6.git / blobdiff