#define SCANCODE(r,c) (((r)<<4) + (c) + 1)
#define NR_SCANCODES ((KB_ROWS<<4) + 1)
+#define SCAN_INTERVAL (50) /* ms */
#define HINGE_SCAN_INTERVAL (150) /* ms */
#define SPITZ_KEY_CALENDER KEY_F1
KEY_LEFTCTRL, KEY_1, KEY_3, KEY_5, KEY_6, KEY_7, KEY_9, KEY_0, KEY_BACKSPACE, SPITZ_KEY_EXOK, SPITZ_KEY_EXCANCEL, 0, 0, 0, 0, 0, /* 1-16 */
0, KEY_2, KEY_4, KEY_R, KEY_Y, KEY_8, KEY_I, KEY_O, KEY_P, SPITZ_KEY_EXJOGDOWN, SPITZ_KEY_EXJOGUP, 0, 0, 0, 0, 0, /* 17-32 */
KEY_TAB, KEY_Q, KEY_E, KEY_T, KEY_G, KEY_U, KEY_J, KEY_K, 0, 0, 0, 0, 0, 0, 0, 0, /* 33-48 */
- SPITZ_KEY_CALENDER, KEY_W, KEY_S, KEY_F, KEY_V, KEY_H, KEY_M, KEY_L, 0, KEY_RIGHTSHIFT, 0, 0, 0, 0, 0, 0, /* 49-64 */
- SPITZ_KEY_ADDRESS, KEY_A, KEY_D, KEY_C, KEY_B, KEY_N, KEY_DOT, 0, KEY_ENTER, KEY_LEFTSHIFT, 0, 0, 0, 0, 0, 0, /* 65-80 */
+ SPITZ_KEY_ADDRESS, KEY_W, KEY_S, KEY_F, KEY_V, KEY_H, KEY_M, KEY_L, 0, KEY_RIGHTSHIFT, 0, 0, 0, 0, 0, 0, /* 49-64 */
+ SPITZ_KEY_CALENDER, KEY_A, KEY_D, KEY_C, KEY_B, KEY_N, KEY_DOT, 0, KEY_ENTER, KEY_LEFTSHIFT, 0, 0, 0, 0, 0, 0, /* 65-80 */
SPITZ_KEY_MAIL, KEY_Z, KEY_X, KEY_MINUS, KEY_SPACE, KEY_COMMA, 0, KEY_UP, 0, 0, SPITZ_KEY_FN, 0, 0, 0, 0, 0, /* 81-96 */
KEY_SYSRQ, SPITZ_KEY_JAP1, SPITZ_KEY_JAP2, SPITZ_KEY_CANCEL, SPITZ_KEY_OK, SPITZ_KEY_MENU, KEY_LEFT, KEY_DOWN, KEY_RIGHT, 0, 0, 0, 0, 0, 0, 0 /* 97-112 */
};
*/
/* Scan the hardware keyboard and push any changes up through the input layer */
-static void spitzkbd_scankeyboard(struct spitzkbd *spitzkbd_data, struct pt_regs *regs)
+static void spitzkbd_scankeyboard(struct spitzkbd *spitzkbd_data)
{
unsigned int row, col, rowd;
unsigned long flags;
spin_lock_irqsave(&spitzkbd_data->lock, flags);
- input_regs(spitzkbd_data->input, regs);
-
num_pressed = 0;
for (col = 0; col < KB_COLS; col++) {
/*
/* if any keys are pressed, enable the timer */
if (num_pressed)
- mod_timer(&spitzkbd_data->timer, jiffies + msecs_to_jiffies(100));
+ mod_timer(&spitzkbd_data->timer, jiffies + msecs_to_jiffies(SCAN_INTERVAL));
spin_unlock_irqrestore(&spitzkbd_data->lock, flags);
}
/*
* spitz keyboard interrupt handler.
*/
-static irqreturn_t spitzkbd_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+static irqreturn_t spitzkbd_interrupt(int irq, void *dev_id)
{
struct spitzkbd *spitzkbd_data = dev_id;
if (!timer_pending(&spitzkbd_data->timer)) {
/** wait chattering delay **/
udelay(20);
- spitzkbd_scankeyboard(spitzkbd_data, regs);
+ spitzkbd_scankeyboard(spitzkbd_data);
}
return IRQ_HANDLED;
{
struct spitzkbd *spitzkbd_data = (struct spitzkbd *) data;
- spitzkbd_scankeyboard(spitzkbd_data, NULL);
+ spitzkbd_scankeyboard(spitzkbd_data);
}
/*
* We debounce the switches and pass them to the input system.
*/
-static irqreturn_t spitzkbd_hinge_isr(int irq, void *dev_id, struct pt_regs *regs)
+static irqreturn_t spitzkbd_hinge_isr(int irq, void *dev_id)
{
struct spitzkbd *spitzkbd_data = dev_id;
unsigned long flags;
state = GPLR(SPITZ_GPIO_SWA) & (GPIO_bit(SPITZ_GPIO_SWA)|GPIO_bit(SPITZ_GPIO_SWB));
+ state |= (GPLR(SPITZ_GPIO_AK_INT) & GPIO_bit(SPITZ_GPIO_AK_INT));
if (state != sharpsl_hinge_state) {
hinge_count = 0;
sharpsl_hinge_state = state;
if (hinge_count >= HINGE_STABLE_COUNT) {
spin_lock_irqsave(&spitzkbd_data->lock, flags);
- input_report_switch(spitzkbd_data->input, SW_0, ((GPLR(SPITZ_GPIO_SWA) & GPIO_bit(SPITZ_GPIO_SWA)) != 0));
- input_report_switch(spitzkbd_data->input, SW_1, ((GPLR(SPITZ_GPIO_SWB) & GPIO_bit(SPITZ_GPIO_SWB)) != 0));
+ input_report_switch(spitzkbd_data->input, SW_LID, ((GPLR(SPITZ_GPIO_SWA) & GPIO_bit(SPITZ_GPIO_SWA)) != 0));
+ input_report_switch(spitzkbd_data->input, SW_TABLET_MODE, ((GPLR(SPITZ_GPIO_SWB) & GPIO_bit(SPITZ_GPIO_SWB)) != 0));
+ input_report_switch(spitzkbd_data->input, SW_HEADPHONE_INSERT, ((GPLR(SPITZ_GPIO_AK_INT) & GPIO_bit(SPITZ_GPIO_AK_INT)) != 0));
input_sync(spitzkbd_data->input);
spin_unlock_irqrestore(&spitzkbd_data->lock, flags);
{
struct spitzkbd *spitzkbd;
struct input_dev *input_dev;
- int i;
+ int i, err = -ENOMEM;
spitzkbd = kzalloc(sizeof(struct spitzkbd), GFP_KERNEL);
- if (!spitzkbd)
- return -ENOMEM;
-
input_dev = input_allocate_device();
- if (!input_dev) {
- kfree(spitzkbd);
- return -ENOMEM;
- }
+ if (!spitzkbd || !input_dev)
+ goto fail;
platform_set_drvdata(dev, spitzkbd);
strcpy(spitzkbd->phys, "spitzkbd/input0");
for (i = 0; i < ARRAY_SIZE(spitzkbd_keycode); i++)
set_bit(spitzkbd->keycode[i], input_dev->keybit);
clear_bit(0, input_dev->keybit);
- set_bit(SW_0, input_dev->swbit);
- set_bit(SW_1, input_dev->swbit);
+ set_bit(SW_LID, input_dev->swbit);
+ set_bit(SW_TABLET_MODE, input_dev->swbit);
+ set_bit(SW_HEADPHONE_INSERT, input_dev->swbit);
- input_register_device(input_dev);
+ err = input_register_device(input_dev);
+ if (err)
+ goto fail;
mod_timer(&spitzkbd->htimer, jiffies + msecs_to_jiffies(HINGE_SCAN_INTERVAL));
for (i = 0; i < SPITZ_KEY_SENSE_NUM; i++) {
pxa_gpio_mode(spitz_senses[i] | GPIO_IN);
if (request_irq(IRQ_GPIO(spitz_senses[i]), spitzkbd_interrupt,
- SA_INTERRUPT|SA_TRIGGER_RISING,
+ IRQF_DISABLED|IRQF_TRIGGER_RISING,
"Spitzkbd Sense", spitzkbd))
printk(KERN_WARNING "spitzkbd: Can't get Sense IRQ: %d!\n", i);
}
pxa_gpio_mode(SPITZ_GPIO_SWB | GPIO_IN);
request_irq(SPITZ_IRQ_GPIO_SYNC, spitzkbd_interrupt,
- SA_INTERRUPT | SA_TRIGGER_RISING | SA_TRIGGER_FALLING,
+ IRQF_DISABLED | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
"Spitzkbd Sync", spitzkbd);
request_irq(SPITZ_IRQ_GPIO_ON_KEY, spitzkbd_interrupt,
- SA_INTERRUPT | SA_TRIGGER_RISING | SA_TRIGGER_FALLING,
+ IRQF_DISABLED | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
"Spitzkbd PwrOn", spitzkbd);
request_irq(SPITZ_IRQ_GPIO_SWA, spitzkbd_hinge_isr,
- SA_INTERRUPT | SA_TRIGGER_RISING | SA_TRIGGER_FALLING,
+ IRQF_DISABLED | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
"Spitzkbd SWA", spitzkbd);
request_irq(SPITZ_IRQ_GPIO_SWB, spitzkbd_hinge_isr,
- SA_INTERRUPT | SA_TRIGGER_RISING | SA_TRIGGER_FALLING,
+ IRQF_DISABLED | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
"Spitzkbd SWB", spitzkbd);
-
- printk(KERN_INFO "input: Spitz Keyboard Registered\n");
+ request_irq(SPITZ_IRQ_GPIO_AK_INT, spitzkbd_hinge_isr,
+ IRQF_DISABLED | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
+ "Spitzkbd HP", spitzkbd);
return 0;
+
+ fail: input_free_device(input_dev);
+ kfree(spitzkbd);
+ return err;
}
static int spitzkbd_remove(struct platform_device *dev)
free_irq(SPITZ_IRQ_GPIO_ON_KEY, spitzkbd);
free_irq(SPITZ_IRQ_GPIO_SWA, spitzkbd);
free_irq(SPITZ_IRQ_GPIO_SWB, spitzkbd);
+ free_irq(SPITZ_IRQ_GPIO_AK_INT, spitzkbd);
del_timer_sync(&spitzkbd->htimer);
del_timer_sync(&spitzkbd->timer);
.resume = spitzkbd_resume,
.driver = {
.name = "spitz-keyboard",
+ .owner = THIS_MODULE,
},
};
git://git.onelab.eu / linux-2.6.git / blobdiff