patch-2_6_7-vs1_9_1_12

[linux-2.6.git] / drivers / isdn / hisax / nj_s.c

diff --git a/drivers/isdn/hisax/nj_s.c b/drivers/isdn/hisax/nj_s.c
index 5fd47f6..8b5822c 100644 (file)
--- a/drivers/isdn/hisax/nj_s.c
+++ b/drivers/isdn/hisax/nj_s.c
@@ -104,9 +104,12 @@ reset_netjet_s(struct IsdnCardState *cs)
        cs->hw.njet.ctrl_reg = 0xff;  /* Reset On */
        byteout(cs->hw.njet.base + NETJET_CTRL, cs->hw.njet.ctrl_reg);
        mdelay(10);
-       cs->hw.njet.ctrl_reg = 0x00;  /* Reset Off and status read clear */
        /* now edge triggered for TJ320 GE 13/07/00 */
        /* see comment in IRQ function */
+       if (cs->subtyp) /* TJ320 */
+               cs->hw.njet.ctrl_reg = 0x40;  /* Reset Off and status read clear */
+       else
+               cs->hw.njet.ctrl_reg = 0x00;  /* Reset Off and status read clear */
        byteout(cs->hw.njet.base + NETJET_CTRL, cs->hw.njet.ctrl_reg);
        mdelay(10);
        cs->hw.njet.auxd = 0;
@@ -151,7 +154,7 @@ static struct pci_dev *dev_netjet __initdata = NULL;
 int __init
 setup_netjet_s(struct IsdnCard *card)
 {
-       int bytecnt;
+       int bytecnt,cfg;
        struct IsdnCardState *cs = card->cs;
        char tmp[64];
 
@@ -183,6 +186,15 @@ setup_netjet_s(struct IsdnCard *card)
                                printk(KERN_WARNING "NETjet-S: No IO-Adr for PCI card found\n");
                                return(0);
                        }
+                       /* the TJ300 and TJ320 must be detected, the IRQ handling is different
+                        * unfortunatly the chips use the same device ID, but the TJ320 has
+                        * the bit20 in status PCI cfg register set
+                        */
+                       pci_read_config_dword(dev_netjet, 0x04, &cfg);
+                       if (cfg & 0x00100000)
+                               cs->subtyp = 1; /* TJ320 */
+                       else
+                               cs->subtyp = 0; /* TJ300 */
                        /* 2001/10/04 Christoph Ersfeld, Formula-n Europe AG www.formula-n.com */
                        if ((dev_netjet->subsystem_vendor == 0x55) &&
                                (dev_netjet->subsystem_device == 0x02)) {
@@ -240,8 +252,8 @@ setup_netjet_s(struct IsdnCard *card)
        bytecnt = 256;
 
        printk(KERN_INFO
-               "NETjet-S: PCI card configured at %#lx IRQ %d\n",
-               cs->hw.njet.base, cs->irq);
+               "NETjet-S: %s card configured at %#lx IRQ %d\n",
+               cs->subtyp ? "TJ320" : "TJ300", cs->hw.njet.base, cs->irq);
        if (!request_region(cs->hw.njet.base, bytecnt, "netjet-s isdn")) {
                printk(KERN_WARNING
                       "HiSax: %s config port %#lx-%#lx already in use\n",